Used Benford Pt 6000 for sale (55,354)

Condition: used, Functionality: fully functional, Year of construction: 2025, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, net weight: 123 kg, Low lift truck Load centre of gravity: 600 Fork width: 160 mm Fork thickness: 47 mm Gearbox: Electromechanical Condition: New device Technical condition: New Front tyres type: Polyurethane Rear tyres type: Polyurethane Battery voltage: 24V Battery Ah: 20Ah Dkobusvw Eyfe Uu Hrel Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2025 Description: - Pin code access - Discharge indicator and operating hour counter, - Lithium battery - Spring-loaded side support rollers D80x30 - Tandem load rollers D80x70

Year of construction: 2010, Condition: excellent (used), CAST MEASURING SPLETTE Fabr.STOLLE Type:GMP 6000 Bj.ca.2010 Dimensions: length 6000 mm width 2500 mm height 360 mm. Very good condition. Dkebu Uu Hsg Uf Nkerel Weight.about 16 000 Kg.

Year of construction: 2008, Condition: used, Protective gas conveyor belt furnace Working space: 600 mm wide, 200 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 300 kVA Heating: 10 pcs. Recuperator burner, make WS, connected load 400 kW gross Working temperature: max. 1150° C Heating zones: 5 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 600 mm Belt speed: adjustable from approx. 100-900 mm / minute Debu Uev Ifzqeu Hrokl Heating muffle: heat-resistant curved construction with bead reinforcements, length: approx. 6.85m, material: 1.4841 Cooling zones: Zone 1 approx. 1.5 m, Zone 2 approx. 4.0m, Zone 3 approx. 4.0m, Zone 4 approx. 3.0m Cooling zones made of normal steel sheet (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzle, base plate 8mm thick Protective gas: nitrogen N2, hydrogen H2 Dimensions: working height approx. 1060 mm, heated length (5 zones) approx. 6000 mm, furnace length approx. 6900 mm, loading table approx. 1500 mm, unloading table approx. 1500 mm, total width approx. 2900 mm, total length approx. 30 m The system is available twice (built in 2008 and 2015)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 82,143 h, Functionality: fully functional, machine/vehicle number: R1117265, laser power: 6,000 W, laser hours: 47,211 h, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 25 mm, sheet thickness copper (max.): 25 mm, sheet thickness brass (max.): 25 mm, travel distance X-axis: 12,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 150 mm, year of last overhaul: 2025, table length: 12,000 mm, table width: 2,500 mm, Bystronic ByLaser 6000 Technical specifications: Laser power: 6000 W Laser type: CO₂ Maximum cutting thickness: Mild steel: up to 25 mm Stainless steel: up to 25 mm Aluminum: up to 15 mm Control system: ByVision CNC Maximum positioning speed: up to 113 m/min (370 ft/min) Pallet change system: Double exchangeable table Functions and equipment: Cooling: Chiller to maintain optimal laser operating temperature Dust extraction system: Donaldson Torit dust collector Dkebu Uuov Rpave Hrel Software: BySoft for nesting, facilitating optimization of the cutting system Cutting heads: Available in 5" and 7.5" sizes Automation: Possibility of integration with automation systems such as ByTrans or ByLoader to increase production efficiency

Condition: good (used), Pressing pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand pressing pliers, cable cutters, cable shears, hydraulic cable cutters -Manufacturer: VEB WMW, Hydraulic cable cutter with built-in hand pump -Type: PT 300 08 300 Dsbu Uuovu Tv Ns Hrokl -Passage: 45 x 27 mm -Dimensions: 710/130/H115 mm -Weight: 9.7 kg

Condition: excellent (used), Year of construction: 2012, Complete dosing, packaging, capping and labeling line ccomposed: MIPSA tank, with agitator, made of fiberglass, on legs, with a conical bottom, lower outlet and upper mouth. Capacity: 2.5m³ PCM MM18C12S-FOOD screw pump , suitable for food and cosmetics (Year 2020. )With progressive cavity and short screw to avoid product loss in the final phase of racking. Max capacity: 40 m³/h at 498rpm, 3bar 4.8m³ APV tank made of stainless steel, on legs, with a conical tank bottom. Lower outlet, inlet and upper mouth. GRONINGER DFV-6000volumetric filler model , manufactured in 1991 and completely rebuilt in 2012. With 6 nozzles, dosage from 40 to 1000 cc, includes a centrifugal pump to fill the lung. Debu Uuev Iz Uyo Hrekl ROBERT BOSCH GmbH manual pneumatic closer of 10Nm of torque and 1050rpm Linear labeling machine with 1 head, with adaptation to cylindrical container. height max. label 200mm. Includes EURO CODIC model M30 thermal transfer marker.

Condition: excellent (used), Year of construction: 1996, operating hours: 20,063 h, Functionality: fully functional, VIDEOS ON REQUEST Machine Type: Multiangular Milling Machine Model: HVM 6000 Year: 1996 Control System: Typically equipped with Fanuc, Siemens, or other CNC control systems. Primary Function: Multiangular milling, drilling, tapping, and complex machining operations. Technical Specifications: Worktable: Table size: ~2000 x 600 mm (approximate) Maximum load capacity: ~2000 kg (depending on configuration) Travel: X-axis (longitudinal): ~2000 mm Y-axis (cross): ~600 mm Z-axis (vertical): ~600 mm Multiangular Capabilities: Rotary table: Allows for multi-angle machining (typically ±90° or more in multiple axes). Tilt angle: Adjustable for complex geometries. Spindle: Spindle type: High-speed, precision spindle Spindle speed range: ~50-6000 rpm (variable, depending on configuration) Spindle power: ~15-20 kW (approximate) Spindle taper: ISO 40, ISO 50, or similar (depending on configuration) Tooling: Tool changer capacity: ~20-30 tools (automatic tool changer) Tool holder type: BT, CAT, or similar Accuracy: Positioning accuracy: ±0.005 mm Repeatability: ±0.002 mm Coolant System: Integrated coolant system for machining operations Coolant tank capacity: ~200 liters (approximate) Machine Dimensions: Length: ~4000 mm Width: ~3000 mm Height: ~3500 mm Weight: ~10,000 kg (approximate) Power Requirements: Voltage: 400V, 3-phase Dksbjvx S Dmsu Uu Hrel Frequency: 50/60 Hz Power consumption: ~20-25 kW Key Features: Multiangular milling capabilities for complex geometries. High-precision CNC machining. Automatic tool changer for efficient operation. Robust construction for heavy-duty applications. User-friendly CNC interface for programming and operation. Applications: Precision machining of complex components with multi-angle features. Suitable for industries such as aerospace, automotive, mold-making, and general machining.

Condition: new, color: other, Year of construction: 2022, Year of manufacture: 2022 Empty weight: 389 kg Djbusrfcxnj Uu Hrokl Dimensions (LxW): 252 x 81 cm Lifting capacity: 2.000 kg CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good Condition CE type: CE Unused Manitou JW2500/2000 Jib with winch

Condition: excellent (used), Keyence Type: VHX-6000 Image sensor: 1/1.8-inch CMOS imager Virtual pixels: 1600 (H) × 1200 (V) Scanning system: Full frame method Frame rate: 50 fps (max.) Resolution 2 million pixels: 1600 (H) × 1200 (V), approx. 1000 TV lines 2 million pixels*1*3: 1600 (H) × 1200 (V), approx. 1200 TV lines (2 million pixels x 3 CMOS mode, excellent color fidelity) 8 million pixels*3: 3200 (H) × 2400 (V), approx. 1600 TV lines 18 million pixels*3: 4800 (H) × 3600 (V), approx. 2000 TV lines or more 18 million pixels*2*3: 4800 (H) × 3600 (V), approx. 2000 TV lines or more (18 million pixels × 3 CMOS mode, excellent color fidelity) Electronic shutter: Auto, Manual, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.02 to 4 sec White balance: Button setting, Auto, Manual, Preset (2700K, 3200K, 5600K, 9000K) Rear focus adjustment: Not required LCD monitor*5 Size: Color LCD (IPS), 23 inch Screen size: 509.184 (H) × 286.416 (V) mm Pixel pitch: 0.2652 (H) × 0.2652 (V) mm Number of pixels: 1920 (H) × 1080 (V) (FHD) Display colors: Approx. 16770000 colors*4 Brightness: 300 cd/m2 (Center, 1 dot, typical) Power supply Supply voltage: 100 to 240 V AC, 50/60 Hz Power consumption: 280 VA Environmental resistance Ambient temperature: +5 to +40°C Ambient humidity: 35 to 80% RH (no condensation) Weight Control unit: Approx. 12.5 kg Camera unit: Approx. 1.2 kg (VHX-6100/6020) Console: Approx. 0.5 kg Dimensions (excluding protruding surfaces): 550 (W) × 470 (H) × 200 (D) (when stored) XYθ stage VHX-S660E XY stage: Electric/Manual: Electric Motor on XY motorized stage: Two-phase stepping motor Resolution on XY motorized stage: 1 μm (typ.) Positioning speed of XY motorized stage: 20 mm/s (max.) Travel distance of XY stage: ±50 mm θ rotation angle: – Size of XYθ stage: Surface: 233 × 185 mm (middle disk: ø168) Magnification compatible with transmitted light: 20× or higher Z-axis: Electric/Manual: Electric Motor on motor-driven Z-axis: Five-phase stepper motor Resolution on motor-driven Z-axis: 0.1 μm (typ.) Positioning speed on motor-driven Z-axis: 17 mm/s (max.) Z-axis travel: 49 mm Ratings Supply voltage: 100 to 240 V AC, 50/60 Hz Dkobu Uu Hjg Smy Dorjl Power consumption: 60 VA Environmental resistance Ambient temperature: +5 to +40°C Ambient humidity 35 to 80% RH (no condensation) Weight: Approx. 20 kg Load capacity: 5 kg Within a magnification range of 0.1× to 50× working distance of 95 mm as well as easy handling and high performance. Universal zoom lens VH-Z20R/Z20T The VH-Z20R/Z20T enables high-resolution viewing at standard magnifications of 20× to 200×. With a working distance of 4.4 mm, it offers magnifications down to the submicrometer range. Magnification 500x to 5000x. Year of manufacture: 2018 Sold from location! Condition: used Scope of delivery: (As shown) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2024, Condition: new, Single Belt Press PT-1000 The pulped mash is conveyed via the washing-pulping mill into the press in-feed hopper. The pulp is distributed across the main pressing roller and between the belt to start the initial juice extraction. This pulp will be progressively squeezed to the maximum over a series of additional rollers and mash deflector blades in order to achieve an optimum juice yield of up to 75%. At the exit of the press, the pomace is automatically scraped from the belt. Dkebu Uu Hefglxxersl CAPACITY 800 kg apples/h VOLTAGE 1x230 V POWER 0,8 kW WATER CONSUMPTION up to 4 l/min BELT WIDTH 500MM

Condition: excellent (used), Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt conveyor belt unused Dkjbu Uuovu Td Hs Hrol -Width: 140 mm -Length: 6 m -Transport dimensions: Ø 240 x 145 mm -Weight: 3.2 kg

Condition: used, Year of construction: 2016, Overview  The atmospheric filler was manufactured in 2016 by the Italian manufacturer GAI and used in a Belgian brewery. Technical details  Capacity: 6,000 bottles/h Formats 330 ml Number of valves: 16 Dkebouhthyeu Uu Hrol

Condition: excellent (used), Year of construction: 2021, operating hours: 200 h, Functionality: fully functional, machine/vehicle number: PT-ZNY 155, film width: 440 mm, type of input current: three-phase, pressure: 8 bar, total width: 1,400 mm, total length: 7,000 mm, total height: 1,800 mm, input voltage: 400 V, compressed air connection: 7 bar, temperature: 150 °C, operating temperature: 30 °C, Equipment: safety light barrier, PACKING CHEESE VACCUM MACHINE. WORKING PRINCIPLE DEPENDS ON A SYSTHEMATIC WORKING OF HEATING, FORMING, FILLING, SEALING AND CUTTING STATIONS. SIMPLY CUP FORM IS PROVIDED FROM PET FILM AT HEATING AND FORMING STATIONS, FINAL CHEESE BLOCKS AFTER MOLDING ARE INSERTED (FILLED) IN FORMED CUP AS DEMANDED CAPACITY AT FILLING STATION, AFTER PROVIDING SEALING BETWEEN BOTTOM . FOIL WHICH IS PET FOIL AND TOP FOIL WHICH IS PROMPT AT SEALING STATION. THEN THE CUP IS CUT IN WIDTH AND LENGTH AT CUTTING STATION. Djbu Uu Hev Sr Nvorokl FINALLY FINISHED GOOD CHEESE BLOCK VACCUMED IS CARRIED ON PRODUCT EXIT CONVEYOR IS BEING PROVIDED BY THERMOFORM ICE CUBE MACHINE. OPERATION SPEED: MAXIMUM 15 RPM, (DIFFERS BY MODEL OF MACHINE) MACHINE CAPACITY: DESIGNED FOR 8.000-12.000 PCS/HOUR (DIFFERS BY MODEL OF MACHINE) COOLING WATER: 15-20 C, 100 LT/HOUR AIR PRESSURE: 6 BAR, 1200 LT/MIN ELECTRICAL LOAD: 7KW, 400V, 3 PHASE DIMENSION: 3500 X 1200 X 2000 (DIFFERS BY MODEL OF MACHINE)

Condition: good (used), Year of construction: 2019, operating hours: 1,994 h, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Fanuc, controller model: Fanuc 31i-B, spindle speed (max.): 10,000 rpm, number of spindles: 1, tool mount: 100 mm, Operating hours: 7194 / usage time: 1994 Year of construction: 2019 Control unit: Fanuc 31i-B Dksbjvvmnueu Uu Hrsl Spindle: PC100i (10.000 1/min) Tool clamping system: HSK 100 Tool magazine / places (Options): Chain/50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 400, IKZ 70 bar Positioning range XYZ (mm): 1000 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: Hydraulic 80 bar Additonal options, Specifics: HELLER facing slide unit; Receiver for measuring probe (RENISHAW); Coolant temperature control; forward looking collision avoidance; Interface for exhaust system; 3 colour status lamp; work area flush; Scraping conveyor for wet machining; Fast drill fracture sensing (SBBK); multi-spindle-head support (MSK); Thermal growth compensation; Feed force display; Automatic loading sequence; Automatic unloading sequence; increased tool weight 35kg; tool codechip; Since response emails from Maschinensucher often end up in the spam folder, we kindly ask you to regularly check this folder or contact us directly.

Year of construction: 2006, Condition: like new (used), TUSCAN CNC oilcountry lathe type LC34 x 6000 in good condition with spindle bore 305mm. Specifications: - Double 4-chuck - Control Fanuc 21-T manual guide - Between the centers 6200mm - Turning over the bed 870mm Dobusdx Uccs Uu Hrekl - Turning over the cross slide 500mm - Width of the bed 560mm - Spindle bore 305mm - Spindle connection A2-20 - Speed 4-400 - Building year 2006 Including: - Hydraulic Tailstock - 8 pos. Turret - 2 x 4-chuck - front and backside chip conveyer - Fully enclosed guarding - Steady rest

Condition: good (used), Year of construction: 1993, Turning diameter over bed 1250 mm Turning diameter over slide 900 mm Djbu Uou E N H Asu Hrskl Maximum workpiece weight with steady rest 10 000 kg Weight of the machine 20 200 kg without equipment Year of construction 1993

Condition: excellent (used), Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt conveyor belt unused -Width: 140 mm Debu Uujvu Tauj Hrokl -Length: 6 m -Transport dimensions: Ø 660 x 140 mm -Weight: 5.9 kg

Condition: used, Year of construction: 2004, Overview This linear oven, type: STORK THS 630/6000 was built in 2004. The unit is allready dismantled and on stock. The linear oven has two heating areas available that can be tempered differently at the same time. That’ll bring you maximum efficiency in food processing with minimized energy consumption. Technical Details electrically heated heating separately adjustable in two areas adjustable speed belt width ± 630 mm net cooking length : ± 6.000 mm overall dimensions (l x w x h) : ± 8.500 x 1.700 x 3.600 mm with belt wash system suitable for CIP-cleaning canopy with electric hoists suitable for steam injection (heating + product yield) Scope of delivery Linear oven | Stork/ Marel |THS 630/6000| 2004 Debujumzn Ho Uu Hrokl

Condition: used, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, X-AXIS STROKE 6000 MM Y-AXIS STROKE (VERTICAL) 2000 MM Z-AXIS STROKE 1250 MM SPINDLE SPEED 35 - 4500 RPM SK 50 CONE ATTACHMENT AUTOMATIC INDEXING HEAD 1 ° X 1 ° WORK FEED 6 - 10000 MM/MIN Djbu Uovu Ah Ieu Hrskl RAPID FEED 20000 MM/MIN CNC HEIDENHAIN iTNC 530 40-Place Tool Changer 2000 X 7000 MM Anchoring Table CHIP CONVEYOR

Condition: good (used), Year of construction: 2004, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, Machine is refurbished in 2024 Control: Heidenhain iTNC 530 Year of construction: 2004 Technical data X: 5,300 mm Dksbu Uu Hovr S Hborsl Y: 1,500 mm Z: 2,000 mm Table: 6,000 x 1,200 mm Equipped with the following accessories: Ort.Head 1 degree in both axes. Speed range 20-5,000 rpm. Spindle motor 38 KW Mounting: ISO 50 Complete cooling system. Operating platform,2 operating panels

Condition: new, Year of construction: 2024, Functionality: fully functional, turning diameter over cross slide: 1,050 mm, turning length: 6,000 mm, turning diameter: 1,050 mm, spindle bore: 130 mm, spindle speed (max.): 1,400 rpm, travel distance X-axis: 700 mm, travel distance Z-axis: 6,000 mm, spindle motor power: 30 W, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 10 m/min, quill diameter: 160 mm, quill stroke: 300 mm, workpiece weight (max.): 6,000 kg, type of input current: three-phase, torque: 6,400 Nm, overall weight: 19,000 kg, swing diameter over bed slide: 1,400 mm, bar passage: 130 mm, spindle nose: DIN 55026 – 11, CNC control unit FAGOR 8065 Chip conveyor FIAL platform with 4 independent, separate and reversible jaws, diameter 1000 mm. “C” axis directed by the spindle motor, precision +/-20”. Electrical predisposition for future applications of a milling system. Electrical predisposition for future application of a grinding system. Djbuov E N Nme Uu Hrokl Closed bezel hinged in two halves, capacity 450 – 900 mm, capacity 2,500 Kg. Motorized movement of the quill at two speeds, electronic control of the axial thrust force. Movement of the tailstock structure by means of the longitudinal carriage through mechanical coupling. Manual locking to the bench guides by means of the tailstock structure brace. PRAGATTI electric turret with 4 fixed positions. Longitudinal “Z” axis transmission system by means of a double motor on a rack (MASTER & SLAVE)

Condition: good (used), machine/vehicle number: 5336, carrying power: 6000 kg Dkebu Uuogbt Sqs Hrsl surface plate measures: 1500 x 1500 mm dumping area: horizontal bis - 145 ° turning speed: 0 - ca. 1 Upm electrical connection: 400 V, ca. 5 kW space needed: 2800 x 2350 x 3250 mm weight: 5000 kg

Condition: new, Year of construction: 2024, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, Dkjbu Uu Hog Avgljrjl pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

Condition: good (used), Year of construction: 2006, Functionality: fully functional, type of input current: three-phase, frequency: 50 Hz, nominal frequency: 50 Hz, nominal power: 320 kW (435.08 HP), nominal power (apparent): 400 kVA, nominal voltage: 415 V, Equipment: type plate available, Datacenter UPS in very good condition (out of production) Schneider Electric / MGE Galaxy 6000 320kW / 400kVA Dobu Uevzllisu Hrokl Input : 380-415V 3W+N+PE 50/60Hz Output : 380/400/415V 3W+N+PE 50/60Hz

Condition: new, Year of construction: 2024, Functionality: fully functional, turning diameter over cross slide: 1,100 mm, turning length: 6,000 mm, turning diameter: 1,100 mm, spindle bore: 130 mm, spindle speed (max.): 1,400 rpm, travel distance X-axis: 700 mm, travel distance Z-axis: 6,000 mm, spindle motor power: 30 W, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 10 m/min, quill diameter: 160 mm, quill stroke: 300 mm, workpiece weight (max.): 6,000 kg, type of input current: three-phase, torque: 6,400 Nm, overall weight: 18,000 kg, swing diameter over bed slide: 1,400 mm, CNC control unit FAGOR 8065 Chip conveyor FIAL platform with 4 independent, separate and reversible jaws, diameter 1000 mm. “C” axis directed by the spindle motor, precision +/-20”. Electrical predisposition for future applications of a milling system. Electrical predisposition for future application of a grinding system. Dkebu Uu Hev E N A Terjl Closed bezel hinged in two halves, capacity 450 – 900 mm, capacity 2,500 Kg. Motorized movement of the quill at two speeds, electronic control of the axial thrust force. Movement of the tailstock structure by means of the longitudinal carriage through mechanical coupling. Manual locking to the bench guides by means of the tailstock structure brace. PRAGATTI electric turret with 4 fixed positions. Longitudinal “Z” axis transmission system by means of a double motor on a rack (MASTER & SLAVE)