Used Knikmops Km250 Te for sale (135,671)

Condition: excellent (used), -Dimensions:960x1740x2700mm -N°série:930000010611 -Year:12/2013 Crsb Hcyjuwdmhsgbeb -Voltage:400V -Power:2.2kw -Weight:1730kg Revised material:The material will be prepared when it is ordered. Pick up and return deadlines will be arranged at that time ( please ask for price after refurbishment ).

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 22-2941, total width: 700 mm, total length: 800 mm, total height: 1,700 mm, empty load weight: 40 kg, Equipment: documentation/manual, Hello, for sale is a dispensing system for 2K liquid silicone rubber (LSR) for 20 l containers. This is a demonstration unit. Csb Hcygsv T Ii Ujbjrb A material feeder and a color dispensing unit are included. Truck loading is guaranteed.

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 11 kW (14.96 HP), Equipment: documentation/manual, 3 Teka Pusch Pull fume extraction units for sale. The three units are sold together. Price 14400Eur, net. The units are equipped with Easy-Cleain-Plus filter cartridges. They were used in a welding plant with an area of 800 sq m from 2017 to 2020. Due to a change of activity, the 3 units are for sale together with the installed network. The units can be viewed after consultation in operational condition. The Push Pull system is excellent for cleaning the air in halls where local extraction is not sufficient for some reason or has a negative impact on productivity. The suction openings are placed at a height of approx. 5-6 meters, and the cleaned air is returned to the opposite side of the hall. The system collects and filters harmful substances on the suction branch, and the cleaned air is returned to the space on the pressure branch. It is possible to inhale fresh air on the suction line. Filter equipment: TEKA FILTERCUBE 4H – 11 kW (3DB) Fixed installation extractor and cartridge separator with automatic filter cleaning. The used “Easy Clean+ ” cartridges are provided with a protective layer (“precoat”) during production, which ensures surface filtration, thus high (>99%) filtration efficiency (BIA M filter class) and a long service life. Automatic pulse cleaning is ensured by built-in membrane valves and the microprocessor “Pulse Control” control, which is easy to operate and programmable according to the current requirements. Dirt accumulated on the surface of the filters leads to an increase in the pressure difference (constantly monitored before and after the filters). The control starts the pulse cleaning when the preset value is reached. The dirt thrown off by each pulse falls into the dust container, which must be emptied periodically. The cleaning pulses can be activated either by timing or manually. The text display shows the current operating status (pressure drop, operating hours, date, etc.). Technical data FC 4H 11kW: Pre-filter: perforated baffle Filter area [m²]: 100 (4 cartridges 25m²) Filter cartridge: BIA M Control: Pulse-Control Current consumption [A]: 0.3 Fan capacity [m³/h]: 8,000 (at operating point) Pressure [Pa]: 2,500 (at operating point) Motor power [kW]: 11 Power supply [V/Hz]: 400/50 Current consumption [A]: 22.5 Motor control: Star-Delta connection Noise level [dB(A)]: approx. 78 Intake port: Ø400mm on the left Exhaust port: Ø450mm on the right Dimensions (WxDxH) [mm]: Approx. 800 x 800 x 2920 Floor area of the Filtercube 4H extraction units: 800x800mm)  Each device is IFA (BGIA) certified in accordance with DIN EN ISO 15012-1. The biggest advantage of the Push Pull system is that it works unnoticed, without the need for workers, thus having a positive effect on productivity. Crsb Hot A Uiiecygbeb The filter cartridges are cleaned using the microprocessor CONTROL UNIT2 control and the special POWER-SPRÜH system. CONTROL UNIT2 filter control The microprocessor CONTROL UNIT2 filter control can be monitored via a plain text display. This control monitors all operations of the extraction and filtration unit. It determines the amount of compressed air required for cleaning, based on this the air volume can be adjusted and the control can be changed manually or even depending on the pressure difference and time. There is also a possibility to remotely indicate the filter status. The control is connected to the operating hour counter and a clock.

Condition: used, Year of construction: 2007, filter area: 150 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Plymovent / Euromate Model: SCS Year of production - 2007 Cartridge filter inserts - 2 pcs Filtration surface 150 m2 Fan in a sound-absorbing enclosure with a noise silencer with a power of 7.5 kW. Fan model: CHB16LG03 Built-in frequency converter Efficiency up to 9000 m3/h Inlet diameter - 400 mm Ceb Hcowdgq Rjygbsrb Filtration efficiency - 99.8 % Contamination container - 100 liters Includes noise silencer and electrical documentation. Stock no.: 0842

Condition: used, machine/vehicle number: 11629, Rotor diameter: 450 mm Rotor width: 800 mm Croboghgqas Hcygbob 5 x 5 blade rotor (offset) 2 rows of stator blades Inlet cross-section approx. 600 x 800 mm Drive motor 55 kW With soundproof box, mobile

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, The EFI VUTEk GS3lx Pro LED printer, featuring UltraFX Technology, will help perfect your POP business. It’s designed for high production throughput, higher volumes, and shorter lead times while maintaining image quality. And you get the versatility to support the widest range of media and applications. 8 colors + white Csb Hjv H Dyvocygborb In production Installation in Europe available upon request. Productivity • Express Mode – 3,400 ft2 (318 m2) per hour - Production up to 94 4 ft x 8 ft (1.2 m x 2.4 m) boards per hour • Production Mode – 2,300 ft2 (215 m2) per hour - Production up to 64 4 ft x 8 ft (1.2 m x 2.4 m) boards per hour For further technical information please refer to attached brochure

Condition: excellent (used), Year of construction: 2006, -Lifter for the bowl of a spiral mixer or a VMI inclined axis mixer - Bowl blocking by lever Creb Hcyjuwdhfsgbsb - 4 possible pouring directions - Drive by chain -Loy Tdwhsuwdhfo Sjrk - Motorization "upwards downwards". - Safety rack - Voltage: 400 V - 50 Hz - Power: 1.1 kW - Amperage: 2.81 A - Weight of dough: 160 kg - Weight of dough + container: 340 kg - IP 54 PROTECTION - Compatible with : Brl0Iankuge 1- Spiral mixer: VMI SPI 220, SPI 340 and SPI 400 ACCESS. -Inclined axis mixer VMI 2330 MAL, MAEHW and MB 1024 AH. - Bowl height in pouring position between 1.70 m and 2.70 m. - Serial number: 143174 - Year of manufacture: 2006 Overhauled material: The material is prepared when it is ordered. The takeover and return deadlines will be agreed at that time (please ask for the price after reconditioning).

Condition: new, Year of construction: 2025, Functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Crjb Howf Hdgecygbob Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Maximum sawblade projection: 150 mm Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

Condition: used, Year of construction: 1993, Functionality: fully functional, conveyor belt length: 2,730 mm, conveyor belt width: 360 mm, conveyor belt speed: 50 mm/s, total length: 2,730 mm, total width: 490 mm, total height: 1,620 mm, power: 0.762 kW (1.04 HP), motor manufacturer: BONFIGLIOLI, Equipment: type plate available, TAF item number: 1000004806 Manufacturer: trio-technik Year of manufacture: 1993 Overall dimensions: 2,730 x 490 x 1,620 mm (LxWxH) Crsbswgmrmo Hcygbjb Width including side panel: 490 mm Width including drive: 490 mm Side panel height: 80 mm Total conveyor length: approx. 2,820 mm Conveyor length, horizontal: approx. 820 mm Conveyor length, vertical: approx. 2,000 mm Conveyor width: 360 mm Belt type: PVC, cleated belt Belt width: 400 mm Cleats: H = 20 mm, cleat spacing = 400 mm Substructure: mobile, height-adjustable, max: 1,620 mm | min: 1,250 mm Drive: chain drive Motor: gear motor Motor data: 0.762 kW Conveyor speed: 0.05 m/s, constant Net weight: 82 kg Special features: incl. ON/OFF switch Condition: Used / fully functional Function test: OK

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 150E/140207, Disc finishing machine for high-gloss polishing, deburring and fine grinding of non-ferrous metals, jewelry, titanium, steel alloys and reduction of orange peel formation. Polishing and grinding granulates are used for dry processing. Cjbsrwl Ngs Hcygbjrb PLEASE NOTE: The machine is not suitable for wet processing! It only works in dry processing. Prepayment Transportation not included

Condition: used, machine/vehicle number: 11550, Rotor diameter: 300 mm Rotor width: 140 mm 10 rotor blades 2 rows of stator blades Inlet cross-section approx. 250 x 300 mm Drive motor: 5.5 kW Csb Hcjghgnxjygbjrb

Condition: excellent (used), Witels-Albert wire straightener, consisting of 1x type ER 7 - 9.0 wire range 7-9 mm Cjbou S R Ifs Hcygberb 1x type ER 5 - 9.0 wire range 7-9 mm Total length approx. 500 mm Weight approx. 20 kg

Condition: used, Year of construction: 2014, machine/vehicle number: 950144105510003, Lg.No. 25044 Welding mist filter system with spark pre-separator + extraction arms Technical specifications - Upright design for filtering welding mist + grinding dust - Welding fume class "W 3" - Suitable for filtering welding fumes from steels with chromium + nickel content of over 30% - Exhaust air can be vented into the work area, e.g., for heating, or outside - TEKA control system - Air flow rate up to approx. 5000 m³/h - Max. static pressure up to approx. 3000 pa - 4 BIAM filter cartridges - Pulse Jet cleaning method with separation efficiency > 99% - Separate control cabinet - Connection 400 V / 5.5 kW - Space requirement of filter cube approx. W 850 x H 3150 x D 850 mm - Weight approx. 380 kg Csb Hcygswgd A Aebjrb

Condition: used, Year of construction: 2001, power: 75 kW (101.97 HP), 6-strand log feeder WD GDZ 76/71 600 stroke frame saw Year: 1989 with riving knife; with cross-cut saw; fully mechanized with remote-controlled H 38 carriage; Year: 2001, complete overhaul and new electronics Crsb Hcyewc Ni Tjgbjb 75 kW

Year of construction: 2018, Condition: good (used), Max temperature: 40° Celcius Min. temperature: 5° Celcius Volume Tank: 260 Liter Pump flow: 192 Ltr/min. Pump pressure: 405 kPa Refrigerant: R407C Motor power: 21 kW Ceb Hcyowavt Hsgborb Country of origin: Belgium Machine weight: 435 kg

Condition: used, operating hours: 611 h, fuel type: electric, fuel: electricity, General information Field of application: Grounds care Technical information Steering: articulated Empty weight: 1.130 kg Functional Working width: 100 cm Condition General condition: average Technical condition: average Visual appearance: average Other information Transport dimensions (LxWxH): 1,7x1x1,6 Production country: NL Additional information Please contact Vink Machinery for more information Tennant 7100 * 2005 * 611 working hours * Battery drive * External charger * 1130 kg own weight Crob Howa Dc Aocygbob

Condition: used, machine/vehicle number: 10460, 5-blade rotor 2 rows of stator blades Cjb Hcygjghgg Ujberb Rotor diameter 400 mm Working width 600 mm Inlet cross-section approx. 500 x 600 mm

Condition: excellent (used), Wire straighteners from different manufacturers and different working ranges are available. Please take a look at the pictures with the technical data. We can send you further photos and technical data. Crjb Hcyotmf A Degbeb

Condition: excellent (used), Functionality: fully functional, Year of construction: 2012, operating hours: 6,000 h, mileage: 110,000 km, carrying capacity of cage: 200 kg, lifting height: 20,000 mm, fuel type: diesel, TRUCK MOUNTED PLATFORMS CTE ZED 20 CH Year 2012 Working height 20 m Horizontal outreach 9,5 m Basket capacity 200 kg Hours 6.000 Crjb Hcygewhd Syobsb km 110.000 Excellent conditions Complete of all documents Inspected and refurbished by CTE service provider

Condition: good (used), Functionality: unexamined, turning diameter over cross slide: 178 mm, spindle bore: 35 mm, turning diameter: 280 mm, center height: 145 mm, turning length: 750 mm, total length: 1,700 mm, total width: 800 mm, total height: 1,800 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 70 rpm, overall weight: 800 kg, - Operating voltage: 380 V Crob Hcysv Iqr Uegbjb - Frequency: 50 Hz - Rated current: 11 A - Spindle nose: D 1-3 - Morse taper in head sleeve: 3 - Lead screw diameter: 25 mm - Thread: 6 mm pitch

Condition: used, Year of construction: 2001, operating hours: 37 h, 2001 | Iteco | Iteco IG 8089 (10m) without batteries | Used Scissor Lift | 37 hours Crob Hcowbdvreygbeb 📍Location: France, Les Chères 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 2000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 15 inspection points 10 approved ✅ 4 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: The machine's functions could not be tested because the batteries are no longer working. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37991 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Year of construction: 2017, operating hours: 1,277 h, fuel type: electric, fuel: electricity, Field of application: Grounds care Empty weight: 2.750 kg Working width: 132 cm Transport dimensions (LxWxH): 2,3x1,2x1,5 Production country: NL Please contact Vink Machinery for more information Tennant T 17 * 2017 Crob Hcswa Amaoygbeb * Battery drive * 1277 working hours * External charger * 2750 kg own weight

Condition: used, machine/vehicle number: 10461, 3-blade rotor (offset blades) Crjb Heghgg Rocygbjb 2 rows of stator blades Rotor diameter 300 mm Working width 600 mm Inlet cross-section approx. 440 x 600 mm

Condition: used, machine/vehicle number: 11058, 3-blade rotor Crsb Hsghgg Hocygbob 8 rotor blades (staggered) 2 rows of stator blades Rotor diameter: 200 mm Rotor speed: approx. 900 rpm Working width: 880 mm Inlet cross-section: approx. 130 x 845 mm

Condition: used, machine/vehicle number: 5257, Inlet: 800 x 200 mm Rotor diameter: 200 mm Width: 880 mm Rotor blades: 3 Cjb Heghgbzocygbsrb Stator blades: 2 Drive: 5.5 kW