Used Knikmops Km130 Te for sale (135,633)

Condition: refurbished (used), Year of construction: 1990, Karstens K11 1000 full equipment The cylindrical grinding machine was completely overhauled at PS-Karstens. The machine is inspected and in a very good condition. Since we are specialized in Karstens cylindrical grinding machines, we can offer you the complete service (electrical and mechanical) for the machine after purchase. Technical data: Center width: 1000 mm center height: 180 mm workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder fine adjustment quill force: 200-600 N, hydraulically operated via foot pedal table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm grinding spindle motor outside: 4 KW grinding spindle motor inside: 2,2 KW workpiece spindle motor: 0,55 KW Machine weight: Net 3800 Kg Infeed drive via DC motor Air cushion supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Infeed control for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes Cgjleh Riwdsin Hi Djt Digital displays for grinding spindle B axis ,workpiece spindle, X, Z axis from HEIDENHAIN Paper belt filter automat approx. 250 L similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm Cjlin Hovut N Asi Degt table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available)

Condition: good (used), Year of construction: 1991, Millutensil spotting press BV25/PM - Adjustable ejection force (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. Cjlijum Ry Ejn Hi Djgt For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: good (used), machine/vehicle number: 3126, Year of construction: 2017, lifting height: 15,400 mm, mast type: telescope, total length: 12,200 mm, total width: 4,240 mm, operation weight: 80,400 kg, engine type: Diesel, lifting capacity: 46,000 kg, additional equipment features: Centralized greasing system, Dual tread, Weight system, Equipment: lighting, Hyster RS46-36CH from Uniktruck Cslisul Dw Isn Hi Dogt

Condition: good (used), Year of construction: 2006, 1 x Turbo Systems Depositor Cjlin Hiowftahe Dogt Type: D150P Year: 2006 *Video available* Located in Melksham, Wiltshire

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version Cslin Hisvt Dwbe Dsgt - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 750 mm center height: 180 mm / (250 mm = option) Workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder correction Cgoleh Rftlein Hi Dot quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 12,5 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: net 3500 Kg Infeed drive by DC motor Air cushion supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Feed control digital with Siemens panel and Siemens SPS for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel scale in X and Z axis make HEIDENHAIN. similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: good (used), Year of construction: 2007, - SIEMENS 849 D control unit - Bar capacity 65 mm - Main and counter spindle with speed 5,000 1/min - C-axis, Y-axis - 3 turrets with 12 stations each (all driven) - Speed of driven tools 4,000 1/min TRAVEL X1= 165, Z1= 220 mm X2= 165, Z2= 150 mm X3= 165, Z3= 650, Y3= 80 (+50/-30) mm Colin Hijuw Izvj Djgt ACCESSORIES Coolant system Chip conveyor Bar feeder TOP Automazioni XF 375

Year of construction: 1978, Condition: good (used), CHRISTEN drill grinding machine - with coolant device - approx. 8 grinding wheels Good condition fully functional can be inspected and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. VAT is shown separately on my invoices. Cgolin Hieifgr Ie Dst Shipping with forwarding agent.

Condition: used, Year of construction: 2011, operating hours: 25,068 h, turning length: 450 mm, turning diameter: 200 mm, This DMG GILDEMEISTER CTX 310 ECO is being auctioned online in our insolvency auction of Zetterer Präzision GmbH - Operating and Business Equipment - Machinery (2 locations). You can find this and many other items on our platform. Cjlin Hewhcg Aoi Dogt

Condition: as good as new (ex-display), Year of construction: 2022, throat depth: 160 mm, nominal power at 50% duty cycle: 16 kVA, input voltage: 400 V, warranty duration: 18 months, Tabletop spot welding machine type 2101 - demonstration machine - never delivered - 18-month warranty - Rated voltage 400V/50Hz - Rated power 16kVA - Welding current 13.2kA - Fuse 50A - with connection cable - Throat depth 160mm - Electrode force 187daN - Stroke 50mm - Electrode cone MK1 - TE550 control system with 250 welding programs, 25 parameters for each program, current display after each weld, constant current, current monitoring, stepper function, language selection (German, English, Italian, French, etc.), with operating instructions - 2-stage foot switch in accordance with accident prevention regulations - Machine main switch - Pneumatic Maintenance unit - Weight approx. 80 kg - Complete documentation including circuit diagram, compressed air diagram, and cooling water circuit is included - VAT deductible On-site commissioning is subject to a fee and billed based on time and effort. Cgelinewhfwqj Hi Djt The system is located in Dresden, near the A17 motorway, and can be inspected and demonstrated by appointment.

Condition: used, Neat fire hose manure hose Weight per piece: 42 kg Storz 6 inch (150 mm) Length: 20 meters Price per piece: € 150,- ex VAT Colin Howgpnwji Dogt More than 200 pieces in stock!!

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 750 mm center height: 180 mm / (250 mm = option) Workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder correction quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 12,5 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer Cgjlin Hisiv Auds Dot grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: net 3500 Kg Infeed drive by DC motor Air cushion supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Feed control digital with Siemens panel and Siemens SPS for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel scale in X and Z axis make HEIDENHAIN. similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: excellent (used), Year of construction: 2005, operating hours: 28,000 h, Functionality: fully functional, arm reach: 14,200 mm, load capacity: 30,000 kg, track width: 3,000 mm, net weight: 28,000 kg, number of previous owners: 1, Equipment: cabin, crane, OBX IV crane Power 45KW Crane at the front, cab on the left Cgolin Hsu H Hq Uji Dst

Condition: ready for operation (used), 11x DRK 26 H from Erwin Stelzer Warburg agitators with emergency stop switch. 8x with propeller, 3x without propeller. Product data: 1 Kw 220/380V 5.9/3.4 AMP. 920 U.p.m. 2,7 HP 0,64 cos Insulation class E Csliefr Ianon Hi Djgt Shaft length 400mm Shaft diameter 30mm Total length 800mm blade diameter 240mm Connection: DN125

Condition: new, We offer you for your conventional or CNC Karstens/GP cylindrical grinding machine spare parts of all kinds around your tailstock, workhead, grinding headstock, ball screw spindles - glass scales - grinding wheel flanges - drive motors - Axis drives ( BOSCH SIEMENS ) - Bellows - Bearings - K11/ K21 infeed controls new and used - Reversing blocks Z.axis in exchange..... Cgelioup Aiksn Hi Dst

Condition: used, For sale is a propeller agitator from Erwin Stelzer Warburg. It is the model 8M 63G.D2. Data on the agitator: RpM: 225 V: 220 / 380 kW: 1,5 shaft length: 500mm blade diameter: 240mm Cgslin Hijga I T Io Det Connection: DN200 For further information see type plate

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 1100 mm center height: 180 mm / (250 mm = option) workpiece weight: 100 kg flying, 300 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 10 degrees Cgoleiv Au Esin Hi Djt feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: Net 3800 Kg Infeed drive by DC motor Air cushion-supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. spindle. New infeed control digital with Siemens panel and Siemens SPS for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel scale in X and Z axis make HEIDENHAIN. similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: good (used), For sale are four propeller agitators DRK64D from Erwin Stelzer Warburg. One propeller blade is slightly bent. Product data: 11kW 380/660V 25.0/14.5A Csliefr Iihsn Hi Degt 1450rpm Shaft length 600mm blade diameter 340mm DN250 0.85 cos IP44 50Hz

Condition: refurbished (used), Year of construction: 1988, Karstens K11 650 The cylindrical grinding machine was completely overhauled at PS-Karstens. The machine is checked and in a very good condition. Since we are specialized in Karstens cylindrical grinding machines, we can offer you the complete service (electrical and mechanical) for the machine after purchase. Technical data: Cgolin Hsh Rixxji Dot Center width: 650 mm center height: 180 mm workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder fine adjustment quill force: 200-600 N, hydraulically operated via foot pedal table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm grinding spindle motor outside: 4 KW grinding spindle motor inside: 2,2 KW workpiece spindle motor: 0,55 KW Machine weight: Net 3800 Kg Infeed drive via DC motor Air cushion-supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Infeed control for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes Paper belt filter automat approx. 250 L similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: ready for operation (used), For sale is the propeller agitator DRK8P6/12D from Erwin Stelzer Warburg. Product data: Cslinsfr Ifdj Hi Dogt 18/4 kW 380V 34,2/10,8 A 980/480 rpm shaft length 780mm blade diameter 420mm 0,92/0,68 cos IP 44 50 Hz Type of operation S1 Insulation class E Nameplate (photo)

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Cgelin Hish Rimms Dot Center width: 1100 mm center height: 180 mm / (250 mm = option) workpiece weight: 100 kg flying, 300 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: Net 3800 Kg Infeed drive by DC motor Air cushion-supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. New infeed control digital with Siemens panel and Siemens PLC for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Year of construction: 1991, Condition: used, For sale is a propeller agitator from Geppert Rührtechnik. It is the model SPF 4 /1.1. year of construction 1991. Data to the agitator: RpM: 1400 V: 220 - 380 kW: 1,1 shaft length: 1010mm Colin Hiega D Ere Djgt blade diameter: 180mm Connection: DN80

Condition: as good as new (ex-display), Year of construction: 2025, Tip height 181 mm chip width 1000 mm largest grindable workpiece diameter 360 mm max. load on the fly 1000 N 100kg max load between centers 3000 N 300kg Z-axis Table inclination 10 degrees Table drive hydr. 0-4 m/min X-axis Adjustment path of the infeed spindle 80 mm Rapid traverse (hydraulic) 50 mm Coarse adjustment travel air cushion 280 mm Infeed drive by DC motor Rapid traverse speed 48 mm/min/Ø Infeed process Grooving Longitudinal grinding 4 preselectable speeds mm/min/Ø 0.01-48 4 preselectable infeed rates mm/ 0.001-0.1 Firing during infeed grinding s 0-99 0-99 strokes Jog infeed mm/Ø 0.001 Grinding headstock Universal, swiveling degrees 0-180 Grinding wheel:Outer D x w x d mm 500x100x127 or 203.2 Grinding wheel.face (option) D mm 250x32x76.2 Grinding wheel. Internal (option) D mm (2-250) Drive power: External, flat kW 5.5 (7.5) Drive power: Internal kW 2.2 Peripheral speed: Outer m/s 35 (50) Grinding wheel wear: Outer mm/Ø 160 Guard width mm 100 Grinding spindle diameter mm 60 Internal spindle mount mm 80 (100) Workpiece headstock: Drive infinitely variable: Mk 4 1/mm 30-270/ 50-450 Workpiece spindle can be fixed Spindle holder mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock can be swiveled on turning part degrees 0-90 Tailstock: Quill holder/ quill diameter mm MK4750 Quill stroke mm 45 Quill force N 100-800/ 250-1400 adjustable Manual quill actuation (foot switch) Quill fine adjustment +- 40µ Connected loads: Total connected load of the machine kW 6.5 -10 Grinding headstock kW 5.5 (7.5) Workhead kW 0.55 (1.1) Cslin Histqf Rze Djgt Coolant cleaning kW 0.75 - 2.2 Lubrication pump guideways kW 0.1 Hydraulic pump kW 1.5 Hydraulic reservoir liter 80 Pneumatics bar 6

Condition: good (used), For sale is a directional jet agitator from Stelzer Rührwerke International GmbH. It is the model SM460-DF. Product data: 1455 R.p.m. 400V Celin Hjfr Icusi Dogt 18,5 kW Shaft length 720mm Blade diameter 280mm For further data see type plate (photo)