Used Knikmops Km100 Te for sale (135,732)

Condition: ready for operation (used), Year of construction: 1999, Control Unit Brand Ferrocontrol Model 3.204 Main Drive Spindle speed range Up to 6000 rpm Tool taper BT30 Movement X-Axis Movement 6500 Y-Axis Movement 400 Z-Axis Movement 380 Additional Equipment For additional info, see the manual attached. This 3-axis Elumatec SBZ 130 vertical machining centre was manufactured in 1999. It features a working range of X=6500mm, Y=400mm, Z=380mm, and a Ferrocontrol 3.204 control system. The revolver tool magazine holds 8 tools with a maximum speed of 6000rpm and a BT30 clamping cone. If you are looking to get high-quality milling capabilities consider the Elumatec SBZ 130 machine we have for sale. Contact us for more information. Fjlouyntkoq Eg D Sepg Application Types Milling

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, filling capacity at 6 bar approx. 520 l/min, maximum pressure of 10 bar, tank capacity of 270 l, 2 cylinders with 2 stages, speed of 920 rpm, motor 400 volts, 50 Hz, 4 kW with Condor pressure switch and pressure gauge, incl. pre-filter, refrigeration dryer (230 volts), automatic boiler drainer (230 V), and oil/water separator, bolted on a safety pallet with rubber vibration mounts, available for immediate delivery from our Seevetal location, Fslq Eewgcb Djg D Sjpg excluding transport, subject to prior sale.

Condition: used, overall weight: 10,500 kg, empty load weight: 3,900 kg, maximum load weight: 6,600 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,440 mm, loading space height: 1,000 mm, first registration: 04/2004, next inspection (TÜV): 06/2025, suspension: air, tire size: 245/70R19.5, color: grey, mileage: 1,001 km, gearing type: other, total length: 2,500 mm, total width: 3,080 mm, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, BPW axles, tandem, air suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, attachable ramps, front and rear outriggers, height-adjustable drawbar. Construction: Tandem flatbed trailer with attachable ramps, 2x BPW axles, drum brakes! Loading height approx. 1000mm! Felq Eewgn A Tsg D Sepg Mileage approx. 91,945km! Ramps €800.00 net surcharge! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! - .

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function Fslq Egefhgvwe D Sopg 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, The EFI VUTEk GS3lx Pro LED printer, featuring UltraFX Technology, will help perfect your POP business. It’s designed for high production throughput, higher volumes, and shorter lead times while maintaining image quality. And you get the versatility to support the widest range of media and applications. 8 colors + white In production Installation in Europe available upon request. Folqov H Dyvj Eg D Sjpg Productivity • Express Mode – 3,400 ft2 (318 m2) per hour - Production up to 94 4 ft x 8 ft (1.2 m x 2.4 m) boards per hour • Production Mode – 2,300 ft2 (215 m2) per hour - Production up to 64 4 ft x 8 ft (1.2 m x 2.4 m) boards per hour For further technical information please refer to attached brochure

Year of construction: 2007, Condition: good (used), Functionality: fully functional, We are offering four original HOLTEC V-roller conveyors from a dismantled unit. Feed rate 50-150 m/min. Diameter 8-80 cm Fpolq Ejwg Df Rsg D Seg Log lengths: 2.4-6.1 m

Condition: ready for operation (used), 75 HP, works fine, new oil and filter set. Fpslswdz Ecoq Eg D Ssg

Condition: reconditioned (used), Year of construction: 2007, Centrifugal mill 1200 mm diameter... Mounted on metal structure with balconies and corridors. Feeding hopper and regulation. Fjlq Egeiypxus D Sepg Motor 180 hp

Condition: good (used), machine/vehicle number: 3260, Year of construction: 2017, lifting height: 4,060 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 2,400 mm, total length: 3,940 mm, total width: 2,320 mm, operation weight: 11,710 kg, engine type: Diesel, lifting capacity: 9,000 kg, additional equipment features: Warning triangle, Dual tread, Front mud guards, Equipment: lighting, Hyster H9.0FT-6 FLK from Uniktruck Felq Egeul D E Se D Sepg

Condition: new, Year of construction: 2024, operating hours: 35 h, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. Felsfnlkwoq Eg D Sopg • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), -Dimensions: 750x885x1600mm -Open size: 750x885x1920mm -Basket size: 620x780mm -Inlet water temperature -8,4kW 55°C-60°C -Water connection G ¾'; max. 60°C -Series no.:827978 -Voltage:400V -Motor power:2.5kw Fpjlq Eg Dotpvq As Seg

Condition: used, machine/vehicle number: 11629, Rotor diameter: 450 mm Rotor width: 800 mm 5 x 5 blade rotor (offset) 2 rows of stator blades Fpslq Egeghgqaj D Sjg Inlet cross-section approx. 600 x 800 mm Drive motor 55 kW With soundproof box, mobile

Year of construction: 2018, Condition: good (used), Max temperature: 40° Celcius Min. temperature: 5° Celcius Volume Tank: 260 Liter Pump flow: 192 Ltr/min. Pump pressure: 405 kPa Refrigerant: R407C Fslq Egswavt Ho D Sopg Motor power: 21 kW Country of origin: Belgium Machine weight: 435 kg

Condition: repair required (used), Year of construction: 1987, Gyratory crusher Model 1500 fine chamber Fslq Eoiuifvsg D Sjpg Requires change axial bearings rest of machine in good condition. Can be repaired or used for spare parts. Price 1 euro per kg.

Condition: good (used), machine/vehicle number: 3069, Year of construction: 2018, lifting height: 5,600 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 2,440 mm, total length: 4,270 mm, total width: 2,555 mm, operation weight: 13,430 kg, engine type: Diesel, lifting capacity: 9,000 kg, additional equipment features: Front mud guards, Rear mud guards, Centralized greasing system, Equipment: lighting, Hyster H9.00XM-6 from Uniktruck Fpjlq Eg Djul Du To Seg

Condition: new, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value Fpelq Egsif Ek Re D Sog • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, machine/vehicle number: 11550, Rotor diameter: 300 mm Rotor width: 140 mm 10 rotor blades 2 rows of stator blades Inlet cross-section approx. 250 x 300 mm Drive motor: 5.5 kW Fpolqeghgnxj Eg D Ssg

Condition: like new (used), Year of construction: 2012, Conveyor belts in different widths 650 mm, 800 mm 1000 mm, 1200 mm . Lengths up to 150 m Foleiwdctsq Eg D Sjpg

Condition: good (used), machine/vehicle number: 3013, Year of construction: 2005, total length: 5,530 mm, total width: 2,520 mm, engine type: Diesel, lifting capacity: 41,000 kg, additional equipment features: Front mud guards, Rear mud guards, Dual tread, Equipment: lighting, Terberg RT222 from Uniktruck Felq Esul Dqueg D Sjpg

Condition: new, Year of construction: 2025, operating hours: 10 h, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 3, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Felqswgc I Re Eg D Sspg Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, machine/vehicle number: 10460, 5-blade rotor 2 rows of stator blades Rotor diameter 400 mm Working width 600 mm Fpolq Egjghgg Ue D Sog Inlet cross-section approx. 500 x 600 mm

Condition: good (used), machine/vehicle number: 2760, Year of construction: 2013, total length: 5,700 mm, total width: 2,500 mm, engine type: Diesel, lifting capacity: 46,000 kg, additional equipment features: Dual tread, Front mud guards, Rear mud guards, Equipment: lighting, Terberg TT223 from Uniktruck Fpolsttwrwjq Eg D Ssg

Condition: used, machine/vehicle number: 10461, 3-blade rotor (offset blades) 2 rows of stator blades Fpolq Eoghgg Reg D Ssg Rotor diameter 300 mm Working width 600 mm Inlet cross-section approx. 440 x 600 mm

Condition: used, machine/vehicle number: 11058, 3-blade rotor 8 rotor blades (staggered) Fpelsghgg Hoq Eg D Seg 2 rows of stator blades Rotor diameter: 200 mm Rotor speed: approx. 900 rpm Working width: 880 mm Inlet cross-section: approx. 130 x 845 mm

Condition: used, machine/vehicle number: 5257, Inlet: 800 x 200 mm Rotor diameter: 200 mm Width: 880 mm Folq Ejghgbzjg D Sjpg Rotor blades: 3 Stator blades: 2 Drive: 5.5 kW