Used Knegt 40 Pk for sale (59,969)

Condition: used, bore capacity in steel (diameter) 40 mm Crsln Ujvtgv Hsgu Njb throat 360 mm bore stroke 240 mm total power requirement 2,5 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 1100 x 800 x 2300 mm

Condition: used, Year of construction: 2021, Outstanding Bystronic press brake with mobile bending robot, both from year 2021. Can be viewed under power upon appointment in France and available for immediate purchase. Full technical description of the machine and list with included bending tools in the attached document. Maximum stroke: 200 mm Working length: 1030 mm Maximum pressure force: 400 kN Crjln Uswf I Exogu Njb Machine weight: 4000 kg Operating hours MBR (robot): 4823h Operating hours press brake (1): 7695h

Condition: new, PTG - eccentric die 9 and 10 mm Ø, anvil 15°, clamping/equalising plates, PMH - Anvil 15° and others, clamping/equalising plates 6°/4° and 8°/5° POR 40/42U - eccentric die 9.5 mm Ø, anvil 9.5 mm Ø Colnopfaxus Ugu Njrb

Condition: used, Year of construction: 1976, x-travel 1100 mm y-travel 700 mm z-travel 550 mm surface area 1435 x 700 mm distance spindle /table -10 / 540 mm Number of grooves - width - spacing 8 - 16 - 80 mm min/max distance top edge table - bottom edge spin 0 - 540 mm spindle taper ISO 40 spindle turning speed range 30 - 2066 U/min feed - longitudinal/cross 1,6 - 820 mm/min vertical feeds: 0,8 - 410 mm/min Rapid traverse speed lengthwise and crosswise 2800 mm/min. vertical rapid traverse speed 1400 mm/min total power requirement 15 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,7 x 1,435 x 1,74 m The ‘MU’ universal console milling machine is designed for the fully universal machining of complicated workpieces made of steel, cast iron or non-ferrous Coln Uguswgn Aae Nsrb metal with the heaviest clamping. The large square working area enables the economical machining of bulky workpieces with surfaces in different planes, often in just one clamping operation. With the Huron fully universal milling head, the milling spindle can be swivelled in quickly and safely in any direction to the workpiece or work table, so that practical and reliable solutions can be found for a wide variety of work tasks while limiting manual and non-productive times. The double control stand - on the machine and front side - allows the machine to be operated while monitoring the tool in operation, even at extreme positions of the milling spindle.

Condition: used, Year of construction: 2016, operating hours: 11,725 h, lifting height: 4,100 mm, fuel type: gas, mast type: duplex, fork length: 2,400 mm, total length: 2,900 mm, total width: 1,400 mm, color: other, Empty weight: 6.334 kg Lifting capacity: 4.000 kg - Lifting capacity: 4000kg - Lifting height: 4100mm - Number of wheels: 4 Wheels - Overhead clearance: 2750mm - Attachment: Side-shift - Options: Full cabin, Verwarming - Fork length: 2400mm - Mast: Duplex - Year: 2016 - Documentation available: No - Serial number: 517335G00003 - Operating hours: 11725 - Motor brand: VW - Drive: LPG Csln Uewfpnzsgu Nsrb - Transport weight [kg]: 6334kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Crelnewf Igce Ugu Njb Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: used, Year of construction: 2005, Traverse X-axis: 450 mm X axis travel: 450 mm Z-axis travel: 250 mm X-axis resolution: 0.001 mm X axis resolution: 0.001 mm Z-axis resolution: 0.001 mm Resolution Z axis: 0.001 mm Resolution C-Ache: 0.001° X-axis rapid traverse: 15 m / min Rapid X axis: 15 m / min Rapid traverse Z-axis: 30 m / min., Rapid Z axis: 30 m/min., Workpiece length max.: 320 mm Workpiece diameter max.: 32 mm Workpiece weight max.: 2.5 kg tool holder cone: ISO 50 Tool holder cone: ISO 50 Grinding spindle speed stepless: max. 7,500 rpm Grinding wheel diameter: max 350 mm Connected load approx.: 25KVA (400V /50Hz) Dimensions L x W x H: 1900x1900x1900mm Crjln Usku Hwpegu Nob Weight approx.: 4000 kg Suitable for end machining of blanks as well as for peeling grinding of steps, for producing tips, chamfers, radii and their combination at the ends of cylindrical tools made of solid carbide, HSS and ceramic. Up to four different grinding wheels in one clamping. Accessories: NUMROTOplus single-user system software Software NUMROTOplus touch cycles workpiece (RS/SF) Software NUMROTOplus SF cycles Software NUMROTOplus cylindrical grinding SF 40 incl. software & hardware (hollow shaft motor) Chuck clamping cylinder pneumatic Balancing system SA (semi-automatic) EB 500 Pneumatic workpiece clamping Oil collecting pan Electrostatic mist extractor.

Condition: good (used), Manufacturer: Demag Lifting capacity: 250 kg Creln Ugusth Ry Dj Neb Lift: 2,3 m

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal struts to increase the floor load-bearing capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Crslnjwfdnio Ugu Neb Refrigerant: R-404A Weight: 550 kg For your safety, please note the following information! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2011, Höcker shredder PHSS 40/110 Crsln Uguswfflpo Nob Technical data: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of construction: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Remark: The machine is in working condition. It has been checked and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Viewings are possible at any time by appointment. We are also happy to carry out tests with your material on request for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: used, Year of construction: 2011, operating hours: 13,430 h, lifting height: 4,550 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, total height: 3,000 mm, total length: 2,900 mm, total width: 1,250 mm, color: other, Empty weight: 6.477 kg Lifting capacity: 4.000 kg Fork dimensions: 1.150 x 2.230 mm - Lifting capacity: 4000kg - Lifting height: 4550mm - Maximum fork width: 2230mm Cjln Ugswfpftou Nsrb - Number of wheels: 4 Wheels - Overhead clearance: 3000mm - Attachment: Side-shift, Fork positioner - Options: Work lights - Fork length: 1150mm - Free lift: 0mm - Mast: Duplex - Year: 2011 - Documentation available: No - CE mark available: Yes - Serial number: 516327B00130 - Operating hours: 13430 - Battery voltage: 80V - Brand/Type: Still - Capacity: 840Ah - Battery year of construction: 2016 - Drive: Elektric - Transport dimensions: 2900mm x 1250mm x 3000mm (l x w x h) - Transport weight [kg]: 6477kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Functionality: fully functional, Year of construction: 2013, operating hours: 8,568 h, load capacity: 5,000 kg, lifting height: 4,020 mm, fuel type: diesel, mast type: standard, construction height: 2,900 mm, fork carriage width: 1,460 mm, fork length: 1,190 mm, total length: 5,050 mm, drive type: Diesel, construction width: 2,230 mm, net weight: 9,690 kg, Sideloader Load center of gravity: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Coljv H E Hden Ugu Njrb Technical condition: Very good Front tires type: Pneumatic Front tires size: 3.00-15 Rear tires type: Pneumatic Rear tires size: 3.00-15 Description: In addition to this Bulmor model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ60/14/40. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would be happy to display your vehicle for consignment sale. Pantograph: 1,245 mm Heating, full cab, Platform width: 1,050 mm

Condition: used, Year of construction: 2023, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1200 mm column arm 200 mm ram stroke speed 60.0 mm/sec return speed 80. mm/sec work speed 60.0 mm/sec work stroke 100 mm table height 760 mm table width 150 mm oil volume 130 ltr. voltage 400 Volt Control ESA E21 total power requirement 4.0 kW weight 3030 kg range L-W-H 2050 x 1800 x 2030 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block Creln Uou Tv D Uegu Njb - side + rear protective device - 2x front support arms - movable double foot switch (operation)

Condition: excellent (used), Year of construction: 2019, USED KARCHER B40 C Bp Fleet scrubber + head D51 YEAR OF MANUFACTURE 2019 WE PROVIDE WARRANTY! TECHNICAL DATA: - Brush working width (mm) 510 - Working width of the squeegee (mm) 850 - Theoretical capacity (m2) 1800 - Tank capacity (l) 40 - Weight (kg) 164 - Power supply voltage 24 V - Dimensions (L x W x H) 1249 x 575 x 1145 INCLUDED: - Disc brush - Pick-up bar - Built-in battery charger - ATTENTION: THE KIT DOES NOT INCLUDE BATTERY Items to be purchased according to individual customer order THE LARGEST SELECTION IN POLAND !!! WE PROVIDE WARRANTY! We offer: Celsuf Eflsn Ugu Njrb - large selection of washers of this model, in technical condition as well as visually very good - we provide warranty on purchased equipment - we have warranty and post-warranty service - possibility of transport - possibility of shipping the washer by courier Why is it worth buying the device in BUBU-KAR? Buying machines in our company you are sure that the equipment is in working order, because all machines are serviced by our specialized technical department. You don't have to worry about spare parts, because we have a wide assortment of spare parts on sale, more than 4 thousand items. Our advantages: - large selection - professionalism - flexibility - knowledge and experience

Condition: excellent (used), Vötsch Type: VT 4034 Vötsch Temperature Cabinet VT 4034 Air-Cooled Refrigerant: Converted to R-452 A Internal dimensions: Height 750 mm, Depth 765 mm, Width 580 mm External dimensions: Height 1780 mm, Depth 1595 mm, Width 865 mm Croln Uguswd Hpao Nob Temperature range: -40°C to +180°C Temperature deviation: temporal ± 0.1 to ± 0.5 K spatial ± 0.5 to ± 2.0 K Heating 3.2 K/min Cooling 3.5 K/min Maximum load (evenly distributed across the surface) of the test chamber floor: 60 kg per insert: 30 kg Total load of the grate supports: 80 kg Test chamber lighting: 24 V halogen bulb 50W Rated voltage: 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Fuse provided by the customer: 16 A slow-blow Refrigerant: R-452A Weight: 490 kg / 335 liters For your safety, the following information! The following steps are carried out on our chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2025, operating hours: 5 h, Functionality: fully functional, mileage: 5 km, power: 80 kW (108.77 HP), axle configuration: 4x2, operation weight: 8,000 kg, maximum load weight: 2,500 kg, empty load weight: 5,500 kg, tire size: 245/70 R17.5, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, loading space volume: 4 m³, Equipment: air conditioning, hydraulics, A new Macro M 40 sweeper from the Italian manufacturer Macroclean is offered, built according to customer requirements. DR Reinigungstechnik is the direct importer and service provider of Macroclean in Germany, the Netherlands, Belgium and Luxembourg. Macroclean is a medium-sized company where around 30 employees build 3 models of sweepers by hand all year round, specifically M10, M40 and M60. During our first visit to the factory, we were impressed by the quality and the machines. Macro sweepers are made of high-quality metal. It is a sustainable product that retains its value for many years. By using sustainable diesel, you also protect the environment without buying an expensive electric sweeper. The cabin is very clearly laid out and fully equipped with heating, air conditioning, radio and various cameras. The Macro M40+ has a sweeping waste container with a capacity of 4 m3. The side brushes are installed on the side, in the middle of the machine, in front of the 1300 mm wide main sweeping roller. With 2 side brushes, the machine has a sweeping width of 2500 mm. If desired, a third, adjustable side brush can be attached to the front, increasing the sweeping width to 3300 mm. It is actually a vacuum sweeper where the sweepings are transported from the brush in a lift (and suction) into the sweepings container. This system is much better, especially for coarse dirt, city cleaning and in production plants. The sweepings container can also be emptied into waste or disposal containers using the hydraulic high emptying system. An important special accessory is a high-pressure cleaner with a hose reel mounted at the rear. The high-pressure cleaner is not good for cleaning the sweepings container or the machine, it is ideal for cleaning in corners, buildings, sewers, cleaning garbage cans, etc. after they have been emptied with the optional hand suction hose. Macro can build many customer requests such as magnetic strips at the front or back. For further information, please refer to the PDF attachment to this ad. The machine is suitable for continuous use on company premises, shopping centers, production areas (outdoor areas / ventilated), logistics centers, city cleaning, municipal cleaning and much more. We are a family business and advise you personally. In a personal conversation, we can explain the machines to you and discuss the next steps. Crsln Ugujv E Ng So Njb If you have to clean halls, factory buildings, warehouses inside, then you can also see our Sparkoz TN10 and TN70 cleaning robots in daily use. These have been working in daily cleaning since August 2024. In Germany and Austria, we can also offer you good leasing conditions from our German leasing partner. It is the leasing company directly and NOT an agent! You can receive further questions or information by email or telephone from our office in Mannheim.

Condition: used, Year of construction: 2007, operating hours: 1,910 h, fuel type: electric, color: other, Working height: 14.320 cm - Working height: 14320 - Options: Non-marking tires - Movement: Solid rubber tires Crsln Ugjwfnknju Njb - Platform load capacity: 227 - Type: Articulated aerial platform - Year: 2007 - Documentation available: No - Serial number: Z40N07-266 - Operating hours: 1910 - Battery voltage: 24V - Capacity: 350Ah - Drive: Elektric Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2015, operating hours: 2,915 h, fuel type: diesel, motor manufacturer: kubota, Field of application: Construction Empty weight: 1.100 kg Coln Ugueq Ea Nds Nerb Generator capacity: 40 kVA Please contact Sales Department for more information

Condition: used, mileage: 104,108 km, power: 107 kW (145.48 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,680 mm, first registration: 09/2018, fuel tank capacity: 80 l, emission class: euro6, color: white, number of seats: 3, number of previous owners: 2, Year of construction: 2018, Equipment: ABS, air conditioning, airbag, cruise control, immobilizer system, onboard computer, parking sensors, sliding door, trailer coupling, = Additional Options and Accessories = - Rear parking sensors - Right side sliding door - Heated exterior mirrors - Passenger airbag - Bluetooth car kit - Electric front windows - Electrically adjustable exterior mirrors - Euro 6 - Driver's airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Lumbar support - Front center armrest - Multimedia capability - Radio/CD player Coln Uguewhypzj Njrb - Radio with MP3 support - Start/Stop system - Starter interrupter - Partition = Additional Information = General Information Number of doors: 5 Model year: 2017 Cabin: Single Technical Information Torque: 360 Nm Number of cylinders: 4 Engine displacement: 2,299 cc Transmission: 6-speed, manual Top speed: 152 km/h Dimensions Length/Height: L2H2 Dimensions (L x W x H): 555 x 207 x 250 cm Weight Curb weight: 1,918 kg Payload: 1,582 kg GVW: 3,500 kg Interior Interior: Black Environment CO₂ emissions: 183 g/km Consumption Average fuel consumption: 7 l/100 km Urban fuel consumption: 7.6 l/100 km Extra-urban fuel consumption: 6.7 l/100 km Maintenance, history, and condition Booklets: Available General technical inspection (APO): Inspected until September 2025 Number of keys: 2 (2 remote controls)

Condition: used, mileage: 105,000 km, power: 177 kW (240.65 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, gearing type: mechanical, Year of construction: 2006, Platform 6.05 m – Palfinger PK10000 – 3 hydraulic lifts – 2 manual – radio-controlled – 3 seats – 2 outriggers – total 18,000 kg – unladen weight 8,400 kg – wheelbase 5170 – – = Further information = Year of manufacture: November 2006 Front axle: Steered Celn Ujwhu S Degu Norb Unladen weight: 8,400 kg Payload: 9,600 kg GVW: 18,000 kg Reference number: 35 Contact Miguel Cubas for further information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 a.m. to 7:00 p.m.

Condition: good (used), mileage: 502,000 km, power: 309 kW (420.12 HP), fuel type: diesel, color: orange, axle configuration: 8x4, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: air, Year of construction: 2002, Equipment: air conditioning, cruise control, sleeping cabin, = Additional Options and Accessories = - Aluminum Fuel Tank - Power Brakes - Electrically Adjustable Exterior Mirrors - Low Noise - Speed Limiter - Refrigerator - Air Suspension - Parabolic Suspension - Radio/CD Player - Sunshade - Power Take-Off (PTO) - Central Lubrication = Additional Information = General Information Year of Manufacture: April 2002 Axle Configuration Maximum Front Axle Load: 8000 kg Rear Axle 1: Max. Axle Load: 8000 kg Rear Axle 2: Max. Axle Load: 9500 kg; Reduction: Outer Planetary Axles; Suspension: Air Suspension Rear Axle 3: Max. Axle Load: 9500 kg; Reduction: Outer Planetary Axles; Suspension: Air suspension Weights Empty weight: 26,200 kg Payload: 5,800 kg GVW: 32,000 kg Functional Crane: Palfinger PK 90002-H, built in 2002, behind the cab Body make: Palfinger PK 90002-H CE marking: Yes Celn Ugjwhx T Ssu Nerb Condition Technical condition: Good Visual condition: Good

Condition: used, Year of construction: 2003, Pressure 225 t Bending length 4050 mm Column width 3550 mm Control system: CYBELEC DNC 1200PS ECO Oil volume 400 l Total power requirement 22 kW Machine weight approx. 18,100 kg Accessories/Equipment: - 2 bending aids in front of the machine - Light barrier in front of the machine Csln Ugov Uz Hceu Nerb - Foot switch - CYBELEC DNC 1200PS ECO - Parking space for bending aids on the left - 2 stop fingers - Crowning - Die shift - EHT tool holder top and bottom - Controlled axes: y1, y2, x, R, z1, z2 - Set of bending tools

Condition: used, mileage: 67,184 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, overall weight: 7,490 kg, first registration: 11/2014, loading space length: 3,800 mm, loading space width: 2,350 mm, loading space height: 400 mm, loading space volume: 4 m³, emission class: euro6, color: orange, number of seats: 7, total length: 7,640 mm, total width: 2,550 mm, total height: 2,800 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Double cab with 4 doors, 3-way tipping structure, 6 pairs of lashing recesses incorporated in the floor, PALFINGER medium crane type: PK 7001-KA, 2-point support, floor operation left + right, grab control, 2 steps hydraulically extendable, max. lifting capacity 3200 kg, diagram: approx. 3.2m - 1760kg, 5.0m - 1200kg, 7.0m - 870kg, power take-off, stability control assistant, ABS, engine brake, differential lock rear axle, EcoRoll mode, air conditioning, auxiliary heating, electric. Driver and passenger door windows, heated exterior mirrors, standard driver's seat, two-seater passenger seat, 2 rotating beacons, automatic daytime running lights, fog lights, tow bar and tow bar, storage compartment, leaf spring suspension, vehicle may be covered with advertising and/or lettering. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Crjln Ugsv Nuiyou Njb Please contact us!

Condition: new, Drilling capacity in St 60 40 mm Thread cutting in St 60 M 24 Thread cutting in GG 20 M 30 Short spindle MK 3 drilling stroke 120 mm throat 293 mm column diameter 115 mm machine table - usable support 514x360 mm T-slots number - width - distance 2 x 14 x 224 mm distance spindle-machine table min./max. 117/701 mm feed rate 0,10 + 0,20 mm/rev. spindle speeds 160-2,250 rpm Total power requirement 1.45/1.9 kW machine height 1840 mm Machine weight approx. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP Crsln Ugsifkpwju Neb - Reversing switch for right/left rotation - motor protection switch - Speed adjustment stepless - digital speed display - feed overload protection - protection class IP 54 - Connector plug (ready mounted, cable length 2 m) - Spindle protection with electrical fuse

Condition: good (used), Year of construction: 1995, Pressure 150 t folding length 4050 mm Crolneg T S Aue Ugu Njb column width 3550 mm Control CYBELEC ModEva Pac throat 350 mm distance table / ram 430 mm Table width 250 mm Total power requirement 18,5 kW machine weight approx. 14.500 kg space requirement approx. 4400x2100x3300 mm only available from April 2022