Used Knegt Kmss 175 Sideshift for sale (5,087)

Condition: new, Functionality: fully functional, Year of construction: 2024, load capacity: 1,450 kg, lifting height: 5,200 mm, free lift: 1,420 mm, fuel type: electric, mast type: triplex, construction height: 2,270 mm, fork length: 1,150 mm, total length: 1,950 mm, drive type: Elektro, construction width: 1,320 mm, net weight: 2,800 kg, High Lift Truck Load Center: 600 Fork Width: 100 mm Fork Thickness: 35 mm Mast Type: Triplex Condition: New Technical Condition: New Front Tire Type: Polyurethane Front Tire Size: 250/50 Front Tire Condition: 80 - 100% Delq I Uswfanxsc Uscg Rear Tire Type: Vulkollan Rear Tire Size: 250/75 Rear Tire Condition: 80 - 100% Battery Voltage: 24V Battery Ah: 375Ah Battery Manufacturer: Exide Battery Type: PzS Battery Year of Manufacture: 2023 Battery Condition: 80 - 100% Sideshift, 3rd Valve, 4th Valve, Load Backrest, Full Free Lift, CE Certificate, Pantograph, Red Warning Lights Left and Right

Condition: good (used), - Material: AISI 304 / upper plate: AISI 316 Dimensions: - Depth: approx. 1600 mm - Width: approx. 1750 mm - Shell height: approx. 2500 mm - Ground clearance: 280 mm - Total height: approx. 3200 mm Equipment: - Rectangular manhole 420 x 540 mm - Residual drain: disc valve NW 40, Friedrich no. 2 Ø 40 - Clear drain: disc valve NW 40, Friedrich no. 2 Ø 40 Dcelq I Ujwff N Iec Usg - Level indicator - Tap - Thermometer - Dome NW 500

Condition: new, Year of construction: 2023, 2 tables are connected with tandem circuit for a common load of 5000Kg. Technical description with the following main data: Load capacity 3000 kg static line load useful stroke 800 mm overall height 240 mm total height 1040 mm platform length 1300 mm platform width 1000 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full useful stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 3 meter cable motor 2,2 kW, 1.400 rpm. valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Painting steel blue RAL 5011 Aggregate placement integrated in lifting table Control box dead man control incl. 2 m cable Total weight approx. 330 kg Djlq I Ucsk E Hmtj Uecg Tandem control for joint traversing. Attention: No guarantee can be given for 100% synchronous travel. Any differences in height are compensated for in the home position or top position! The safety shut-off strips of the two lifting tables are NOT mutually coupled. Minimum distance 500mm between the lifting tables. Maximum distance 3000mm between the lifting tables. Self-supporting floor frame with 4 flanged wheels in which the lift table is installed. 4 ball bearing flanged wheels wheelØ150/175, heavy duty version for highest load, made of turned steel C45. Overall height + approx. 50mm

Condition: used, Year of construction: 2007, Overview  The labeler for sleeves was built in 2007 by the German company Krones. It was used in parallel line up with a Krones Contiroll, therefor the working hours on this single labeler are significantly lower than on the other machines of the line. As the full line will be replaced in the summer of 2025, this labeler is available for sale. Technical details Capacity: 26.000 bph  Bottle formats: 250 ml 330 ml 1000 ml Label formats: 129 x 261 92,5 x 175 84,5 x 149 Scope of delivery  Incl. shrink tunnel Krones Shrinkmat Incl. connecting conveyors Incl. program backup Incl. technical documentation Incl. spare parts lists Incl. available format parts     Delq Iov T Ur Ae Uc Uecg

Condition: excellent (used), Functionality: fully functional, load capacity: 1,500 kg, lifting height: 4,750 mm, free lift: 2,000 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 2,060 mm, power: 41 kW (55.74 HP), gearing type: automatic, fork length: 1,100 mm, tire condition: 60 %, overall weight: 2,980 kg, total height: 2,090 mm, total length: 2,400 mm, total width: 1,060 mm, Equipment: cabin, lighting, sideshift, manufacturer:UNICARRIERS NISSAN type:P1D1A15LT year of manufacture:2014 Load capacity:1500 kg -work lights Lifting height: 4750mm Upper guard height: 2200mm Fork length: 1100mm -triplex tower -fork sideshift - solid tires hours 5150 Tail weight:2980 kg Dcslq Ijwb Up Ae Uc Ujg Total length 2400mm + fork width:1060mm tower height:2090mm

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 736 h, load capacity: 3,000 kg, lifting height: 4,890 mm, free lift: 1,550 mm, mast type: triplex, construction height: 2,275 mm, fork length: 1,200 mm, drive type: Treibgas, LPG Forklift ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Transmission: Automatic Condition: As Good as New Technical Condition: Very Good Front Tires Type: Super Elastic Front Tires Condition: 80 - 100% Rear Tires Type: Super Elastic Rear Tires Condition: 80 - 100% Description: Price includes a new accident prevention inspection. The unit is as good as new, reflecting its limited operating hours. We would be happy to organize cost-effective transport for you. Lease-to-own is available! Sideshift, Dcelsv Ufzkoq I Uc Usg 3rd valve, 4th valve, rear work lights, front work lights, half cab, full free lift, CE certificate, safety light.

Condition: used, Functionality: fully functional, Year of construction: 2022, operating hours: 5 h, load capacity: 1,450 kg, lifting height: 4,200 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,700 mm, fork length: 1,070 mm, total length: 1,950 mm, drive type: Elektro, construction width: 1,320 mm, net weight: 2,030 kg, High Lift Truck Load Center: 600 Fork Width: 100 mm Fork Thickness: 35 mm Mast Type: Duplex Condition: As New Technical Condition: Very Good Front Tire Type: Polyurethane Front Tire Size: 250/75 Front Tire Condition: 80 - 100% Rear Tire Type: Vulkollan Rear Tire Size: OD 250 mm/Width 75 mm Rear Tire Condition: 80 - 100% Dolewfanroq I Uc Uecg Battery Voltage: 24 V Battery Ah: 375 Ah Battery Manufacturer: GNB Battery Year of Manufacture: 2022 Battery Condition: 80 - 100% Sideshift, 3rd Valve, 4th Valve, Load Backrest, Full Free Lift, CE Certificate

Condition: used, Year of construction: 2019, operating hours: 10,789 h, lifting height: 8,900 mm, free lift: 3,100 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, total height: 3,520 mm, total length: 1,750 mm, total width: 1,270 mm, color: other, Empty weight: 3.800 kg Lifting capacity: 1.400 kg Fork dimensions: 1.200 x 700 mm - Mast: Triplex - Lifting height: 8900mm Dcjlq Iev Tv Avs Uc Ueg - Lifting capacity: 1400kg - Maximum fork width: 700mm - Free lift: 3100mm - Attachment: Side-shift - Options: Free-lift, Joystick - Overhead clearance: 3520mm - Driving direction: 2 Road - Fork length: 1200mm - Year: 2019 - Documentation available: No - Serial number: 511902V01072 - Operating hours: 10789 - Battery voltage: 48V - Brand/Type: Still 4PzS620 - Capacity: 620Ah - Battery year of construction: 2019 - Drive: Elektric - Transport dimensions: 1750mm x 1270mm x 3520mm (l x w x h) - Transport weight [kg]: 3800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: like new (used), Year of construction: 2018, total height: 3,000 mm, usable height: 400 mm, space requirement length: 4,200 mm, space requirement width: 2,550 mm, power: 175 kW (237.93 HP), controller manufacturer: SIEMENS, controller model: TP 900, working width: 460 mm, usable length: 640 mm, usable width: 460 mm, working height: 400 mm, working length: 640 mm, CONTROLS .. CNC controls SIEMENS TP 900 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE .. length: 640 mm .. width: 460 mm .. Height: 400 mm ELECTRICAL SPECIFICATIONS .. total power consumption: 175 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4200 mm .. space requirements -front/back-: 2550 mm .. total height: 3000 mm Condition NEW 150h was only the IBN and acceptance aqueous solution 3750 liters Rotating basket (horizontal) washing baskets 640x460x400mm - 3 steps cleaning Filter 40/20/10 µm Cleaning processes - B1 Ultrasonic cleaning Dolqevyt Ens I Uc Ujcg - B1 Flow-through cleaning - B1 Spray cleaning - B2 Injection flow-through cleaning - B2 Spray rinsing - B3 Flushing deionized water - B3 Blow-out and dripping - B3 Hot air drying

Condition: used, mileage: 706,329 km, power: 324 kW (440.52 HP), first registration: 04/2012, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 04/2026, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Vehicle number for customer inquiries: 148 ----Special equipment: * EEV * Automatic air conditioning * Triple engine brake * Cruise control * Car phone antenna * Rear axle differential lock * Suspension: air/air (full air) * Electronic Electronic Stability Program (ESP) * Cab: with air suspension * Flame start system * 12-speed transmission - Type: ZF 12 AS, Tipmatic * Rocker arm - EVBec controlled brake * Fuel tank: Combined tank - 595 liters diesel + 330 liters diesel + 75 liters urea solution (AdBlue) * Roof air deflector * Heated air dryer * Eberspächer D4S auxiliary air heater * Lower and upper sleeping berths with storage space * 12V and 24V cab sockets * Fleet management system control module ----Standard equipment: * Axle configuration: 4x2 * Ambient lighting * Approach/front mirrors * 24V/7-pin trailer socket * Anti-lock braking system (ABS) * Anti-skid regulation (ASR) * Audio system: MAN basic Line radio (radio/CD) * Electric exterior mirrors Adjustable and heated, heated wide-angle mirror * 175 Ah battery * MAN-Tronic on-board computer Dolqowfkk Ro I Uc Ujcg * Right-hand curb mirror * MAN-Brakematic electronic braking system * EURO 5 engine * Driver's cab: with Nordic insulation * Driver's cab: XLX * Comfort driver's seat with air suspension * Electric windows * Remote central locking * Tinted windshield * 28 V 80 A generator * Mechanical tilting roof * Body/structure: Tractor unit * Rocker arm brake EVB * Heated fuel filter * Multifunction steering wheel * Raised air intake * 1-cyl. air compressor 360 cc * 10.5 liter engine - 324 kW diesel * Wheelbase 3500 mm * Spare wheel lift on the side * Fifth wheel coupling: Jost JSK 37 C * Disc brakes on the rear axle * Disc brakes on the front axle * Tinted rear side windows * Seat cover/upholstery: comfort quality * Roller sunblind for the windshield * Roller sunblind for the side window, driver's door * Spray mist reduction * Stabilizer on one rear axle * Storage compartment accessible from the outside * Cab-type control system * TGX * Tinted door windows * Door extension for the driver's cab * Underrun protection at the front * Viscous fan * Central locking * Permitted weight Gross vehicle weight 18.00 t ----Technical specifications: * Wheelbase: 3,500 mm * Payload: 10,250 kg * Tire size: 315/60 - 295/60 R22.5 * Tire tread pattern: approx. 60% rear axle ----German vehicle! * €8,850 net plus VAT * TÜV (MOT/AU): April 2026 - SP: October 2025 * For export to third countries or the EU, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We are happy to accept your used vehicle as part payment! * Financing/leasing possible even in difficult cases * This description serves only as a general identification of the vehicle and does not constitute a warranty under the law of purchase. * This information does not claim to be complete. The information/descriptions/images provided are non-binding and do not constitute guaranteed properties. * We assume no liability for errors and obvious mistakes. * The buyer is obliged to check the condition and equipment of the vehicle independently before purchase. * Subject to price changes, typos, errors, and prior sale. * Dear customer, please understand that we have not yet

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm Dcjlq I Ucswd Ii Uj Ujg - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: used, power: 74 kW (100.61 HP), color: grey, Field of application: Mining Empty weight: 34.500 kg Dimensions (LxBxH): 1756 x 346 x 360 cm Dcolqswfyfwo I Uc Ueg Make of engine: Perkins Productivity: 120 tph Screen Decks 3- Triple Screen Size 5,200 x 1,520 mm Weight 34,500 kg Drive Hybrid Motor Perkins/Cummins/Volvo Angle 12-18 degrees Transport Dimensions (mm) 17,560 x 3,458 x 3,604 Operation Dimensions (mm) 19,600 x 14,400 x 6,450

Condition: good (used), Year of construction: 2019, operating hours: 2,431 h, lifting height: 5,390 mm, fuel type: electric, mast type: triplex, construction height: 2,475 mm, mileage: 2,431 km, lifting capacity: 3,000 kg, net weight: 5,700 kg, This TRIPLEX forklift from the brand STILL comes from 2019 and is in good condition;The forklift has a capacity of 3,000 kg;Lifts to a height of 5,390 mm;The forklift is equipped with a FREELIFTEquipped with a SIDESHIFT;Drive-through height of 2,475 mm;ONLY 2,431 hours on the counter;The battery from 2025 (!!) is equipped with an external charger and an automatic filling systemMake an appointment for a test drive;Video to followFINANCIAL LEASE POSSIBLE, Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner Delq Ijv T Nhrj Uc Uscg

Condition: used, Year of construction: 2007, fuel type: electric, total height: 2,290 mm, total length: 2,410 mm, total width: 1,170 mm, color: other, - Lifting capacity: 3000kg - Lifting height: 3310mm - Maximum fork width: 980mm - Number of wheels: 4 Wheels - Overhead clearance: 2290mm - Attachment: Fork positioner, Side-shift - Options: Work lights, Full cabin, Free-lift - Fork length: 1300mm - Free lift: 1565mm - Mast: Duplex - Year: 2007 Dcolq I Ucsv Idlne Ujg - Documentation available: No - Serial number: 516039010333 - Operating hours: 5664 - Battery voltage: 80V - Brand/Type: Midac - Capacity: 775Ah - Battery year of construction: 2019 - Drive: Elektric - Transport dimensions: 2410mm x 1175mm x 2290mm (l x w x h) - Transport weight: 5300kg - Transport packages: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: new, Field of application: Construction Empty weight: 18.000 kg Warranty: 24 months Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. Dcslq I Uswfx Tajc Ueg e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit pipe. 6. ELECTRIC AND CONTROL SYSTEM...

Condition: good (used), Year of construction: 2014, operating hours: 3,481 h, lifting height: 5,390 mm, fuel type: electric, mast type: triplex, construction height: 2,475 mm, mileage: 3,481 km, lifting capacity: 3,000 kg, This TRIPLEX forklift from the STILL brand comes from 2014 and is in very good condition;The forklift has a capacity of 3,000 kg;Lifts to a height of 5,390 mm;The forklift is equipped with a FREELIFTEquipped with a SIDESHIFT and a FORK SPREADERDrive-through height of 2,475 mm;Only 3,481 hours on the counter;The battery is from 2014 and is equipped with an external charger;Make an appointment for a test drive;Video to follow Doljvn R Nyoq I Uc Ujcg

Condition: used, total height: 1,750 mm, total length: 1,400 mm, total width: 800 mm, Empty weight: 500 kg - Documentation available: No - CE mark available: Yes - Turning diameter: 260mm - Min. spindle speed: 60rpm - Center height: 130mm - Center distance: 400mm - Max. spindle speed: 3000rpm Dcjlqjv Stmps I Uc Ueg - Bore diameter: 30mm - Transport dimensions: 1400mm x 800mm x 1750mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, New: Yes Field of application: Construction Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System Dcolowfx Sioq I Uc Ueg - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: good (used), Year of construction: 2019, operating hours: 5,173 h, lifting height: 4,590 mm, fuel type: electric, mast type: triplex, construction height: 2,175 mm, mileage: 5,173 km, lifting capacity: 2,500 kg, net weight: 5,000 kg, This triplex electric forklift from the brand STILL comes from 2019 and is in good condition;Has a capacity of 2,500 kgLifts to a height of 4,590 mm;Drive-through height is 2,175 mm;Suitable for CONTAINER;The forklift is equipped with a FREELIFTEquipped with SIDESHIFT5,173 hours on the counterThe battery is equipped with an external chargerWatch the video on YouTubeFINANCIAL LEASE POSSIBLE, Dcslq I Ucsv T Ngzo Ujg Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner*

Condition: used, Year of construction: 2012, total width: 1,750 mm, total length: 1,800 mm, total height: 1,600 mm, Weight: 1.900 kg Price: On request - Conveyor belt width: 350mm - Conveyor Motor Power: 0.0kW - Arbor saw blade diameter: 650mm - Year: 2012 - Documentation available: Yes - CE mark available: Yes - Serial number: 12236 - Voltage [V]: 400 Dcjlq Iev Rdv Se Uc Usg - Fuse [A]: 100 - Power [kW]: 57.0 - Transport dimensions: 1800mm x 1750mm x 1600mm (l x w x h) - Transport weight [kg]: 1900kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Field of application: Construction Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 Dcjlqjwfx Nzo I Uc Ueg e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: used, Year of construction: 1970, Press brake Model: Conventional Manufacturer: LVD Type: PP Year of manufacturer: 1970 Capacity: 150t Maximum bending width: 2500mm Distance between column: 2040mm Backgauge: 900mm Throat: 250mm Stroke: 175mm Machine-dimensions: 3100x2100x3250mm Machine-weight: 7000kg Delq I Uevq Ukgsc Ujcg - Year: 1970 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, New: Yes Field of application: Construction Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure Dcjlq I Ucswfx H Ho Ujg will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be...

Condition: used, Year of construction: 2021, total height: 2,300 mm, total length: 840 mm, total width: 1,750 mm, Weight: 1.600 kg Price: On request Resaw  Stenner ST100R Year 2021 Pully diameter 915mm Bandsaw thickness min/min 0,8/1mm Bandsaw blade width 100mm Bandsaw blade length min/max 5405/5565 Deoth of cut 400mm Max opening saw to fence 300mm Max opening saw to feed rollers 230mm Feeds speeds (Infinitely variable) 5-60 meters/min Main motor 15kW Heigt of table 955mm Cleaner fluid capacity 3 litre Machine dimensions 1850x900x2300mm (LxWxH), weight 1500kg - Wheel diameter: 915mm - Table width: 700mm - Table length: 1000mm - Year: 2021 - Documentation available: Yes - CE mark available: Yes - Serial number: AZ12179 Dslq I Uev Rdwvjc Ujcg - Voltage [V]: 400 - Power [kW]: 15.0 - Transport dimensions: 842mm x 1755mm x 2305mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2017, total height: 2,300 mm, total length: 840 mm, total width: 1,750 mm, Weight: 1.500 kg Price: On request Resaw  Stenner ST100R Year 2017 Pully diameter 915mm Bandsaw thickness min/min 0,8/1mm Bandsaw blade width 100mm Bandsaw blade length min/max 5405/5565 Deoth of cut 400mm Max opening saw to fence 300mm Dcslq I Uov Rdw Noc Uog Max opening saw to feed rollers 230mm Feeds speeds (Infinitely variable) 5-60 meters/min Main motor 15kW Heigt of table 955mm Cleaner fluid capacity 3 litre Machine dimensions 1850x900x2300mm (LxWxH), weight 1500kg - Wheel diameter: 915mm - Table width: 700mm - Table length: 1000mm - Year: 2017 - Documentation available: No - Serial number: AZ12051 - Voltage [V]: 400 - Transport dimensions: 842mm x 1755mm x 2305mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets