Used All-Kor for sale (56,053)

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Stow Type: Pal Rack NS Technical specifications for installation: Number of rack rows: 1 Number of levels plus floor level: 3 The scope of delivery includes: 6x pallet rack uprights, used Material color: RAL 5015 blue Frame profile: PLFB 12 Profile dimensions: P 85 x 65 x 1.75 mm Incl. cross and diagonal braces, Footplates (120 x 140 x 8 mm) The uprights are pre-assembled (screwed framework) Cgjlqev U I Hvs D Tufot 4,500 mm high 1,450 mm deep 6x upright protectors: used Material color: yellow Total height: 340 mm Suitable for frame profile: 85 mm Side dimensions: 65 x 65 mm Material thickness: 3.00 mm Deflector height: 50 mm Hole diameter: 11 mm Hole spacing: 200 mm Number of holes: 4 30x pallet rack beams, used Material color: RAL 2004 orange Box profile: 80 x 50 mm Beam type: PNB0488 Hooks: 4 HK (hook) Clear width: 2,190 mm Max. load per beam pair 1,000 kg with evenly distributed load 15x wooden beams, used Total width: approx. 2,170 mm Total depth: approx. 1,450 mm Clear span: approx. 1,340 mm for upright depth: approx. 1,450 mm Beam support: approx. 55 mm Board thickness: approx. 20 mm Board width: 135 or 110 mm Weight | Unit: 29.38 kg 60x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x Leveling plates, used Design: Fully galvanized For leveling shelf supports that are installed on uneven ground 1x Load plate with information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Lot of 350-400 Corlettes, Cordes and Koch, width 1.30m / 2m / 2.70m - mostly with runners, some stackable, used -: Prices (net) per piece ex location: Type 1 + 3 - 1.30m: Stackable: €99 Non-stackable: €69 Type 2 - 2.70m: €119 Type 4 - 1.90m / 2m: €99 A precise list of quantities and types will follow! Cgjlq Dewa S Srj Tufst How many Corlettes are stackable and how many still needs to be determined after the Corlettes have been removed from storage! Manufacturer: Cordes Harsefeld Type: Möbel Corlette Foldable (into an L) Rollable Condition: Good Available: from approx. mid-April Location: Würzburg Type 1 – approx. 220 units 1.30m Year of construction: unknown Load capacity: 600kg Dimensions: approx. Width: 1.30m, Depth: 1.15m, Height: 1.80m - 1.90m Type: mc-130.661 Weight: 76kg Not stackable Type: mc-130.615 Stackable 3 high Weight: approx. 85kg Load capacity: 600kg Type 2: approx. 10 units 2.70m Not stackable Type 3 – approx. 130 units 1.30m Low Type: mc-130.641 Weight: 72 kg Load capacity: 600 kg Stackable 3 high Load capacity: 600 kg Dimensions: Width: 1.27 m (according to manufacturer: 1.30 m), Depth: 1.14 m (according to manufacturer: 1.35 m). Height: 1.41 m Type 4 – Quantities unknown (but not many) 1.90 m / 2 m

Condition: good (used), Year of construction: 1998, Pipe surface area: 8.4 m². Equipment drawing available upon request; Design pressure in bar: 10 bar (150 PSI) at 150 °C (300 °F); Design temperature in °C: 150 °C; Alloy: Tantalum; Weight in kg: 458 Cslev Rvw Isq D Tufegt

Condition: new, Year of construction: 2025, Contact Us 24/7 for mobile concrete batching plants for sale. The mobile and compact concrete batching plant represents the pinnacle of innovation, offering maximum mobility with minimal investment. Unlike traditional mobile concrete plants, the MOBICOM 45 has the unique feature of being transportable entirely within a single 40 ft. container. This unique attribute greatly simplifies logistics, allowing the entire facility to be transported by just one truck without requiring extensive site preparation or a mobile crane. The plant maintains the same configuration during both production and transport, ensuring a seamless transition and allowing you to continue operations without interruption. The MOBICOM 45 is not limited to easy transportation alone. Its design ensures that operational efficiency is never compromised. Since the mixer is positioned close to the ground, the produced concrete is directly transferred to the transit mixer via a conveyor belt; this accelerates the flow from production to application, enhances efficiency, and reduces labor requirements. The technical specifications of the MOBICOM 45 include a production capacity of 45 m³/h and a compact area requirement of just 200 m², making it an ideal solution when space and efficiency are critical. The plant’s total motor power of 55 kW and the required generator capacity of 80 kVA provide robust performance in various environments. With different mixer options such as Pan, Single Shaft, and Planetary, the MOBICOM 45 offers the flexibility to meet various project requirements. Additionally, the MOBICOM 45 is designed with sustainability and cost-effectiveness in mind, offering cement silo capacities ranging from 50 to 200 tons to suit various project scales and durations. Technical Specifications of the Small mobile concrete mixing plant 45 m³ General Features Production Capacity: 45 m³/h Transport Dimensions: 8 (L) x 2.3 (W) x 2.5 (H) meters Weight: 9.5 tons Total Motor Power: 55 kW Required Electrical Generator: 80 kVA Mixer Options: Pan - Single Shaft - Planetary Required Area for Operation: 200 m² Technical Specifications Aggregate Stock Bunker: 4 x 6 m³ Aggregate Weighing Bunker: 1 m³ Aggregate Transfer Belt: 800 x 15,250 mm Cgslq Doud T Ras Tufst Mixer Wet Concrete Volume: 0.75 m³ Cement Weighing Bunker: 450 kg Water Weighing Bunker: 300 liters Additive Weighing Bunker: 20 liters Air Compressor: 300 liters, 4 kW Cement Silo: Capacity options ranging from 50 to 200 tons Control Type: FULLY AUTOMATIC

Condition: used, thickness of jaw 125 mm 42 mm Cgolq D Tusp Sgb Iofst clamping width 205 mm clamping capacity 3,5 t weight 27 kg dimensions of the machine ca. 550 x 125 x 120 mm

Condition: used, Functionality: fully functional, In this offer you purchase a used fully automatic coffee machine ‘Necta Korinto Prime’ Object of sale: Celovcau Ieq D Tufogt 1 x Necta Korinto Prime Counter readings: Total: Approx. 22,690 Condition: This offer is for a used appliance, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: new, Year of construction: 2024, Functionality: fully functional, laser power: 6,000 W, sheet thickness aluminum (max.): 20 mm, sheet thickness steel (max.): 30 mm, workpiece weight (max.): 1,000 kg, positioning accuracy: 0.03 mm, overall weight: 5,000 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, Including 7.5 kW extraction system Compact, space-saving, and affordable fiber laser Manually extendable work table - electrically assisted Work table safety door opens and closes electrically Sturdy welded construction for high rigidity, precision, and durability Cslq D Tuowf H Avjfsgt Machine bed shielded by manganese steel plates to protect against heat, sparks, and slag Effective cutting fume extraction; controlled flaps focus the extraction power on the current work area Raycus laser source with autofocus laser head from HSG (optional laser source from IPG) Laser head with faster focusing speed than comparable units, resulting in higher penetration speeds with thicker materials Main lens protected by an easily replaceable double protective lens Efficient water cooling of the laser head Power stabilizer to compensate for voltage fluctuations, thus ensuring consistent cutting quality Very easy handling of the machine and the user-friendly software Control software with numerous templates for programming simple components Material storage management User-friendly nesting software with many features Camera-monitored laser work area with transmission to screen

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Korimat KA 240 Electric Cslq D Tujwfdh Ajfjgt 4x stainless steel baskets Built in 2005 Shipping available upon request

Condition: good (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 500702, wire diameter: 13 mm, machine under of power , ready to work , net price , machine have only 1 set tooling and decolier , machine can bending wire 13 mm Colq D Tujvln Tqsfogt

Condition: good (used), Year of construction: 2011, Pushback rack, Galler pallet racking system, LIFO In the LIFO process, the last products to be stored are the first to be retrieved. Technical specifications: Cjlq D Tuehql Hzefsgt Manufacturer: Galler Type: Pushback rack Condition: used, good floor space: 282 sqm height: 3,10 m length: 47 LFM Shelf depth: 6,00 m bracing: screwed Securing: side and back wall grids channel load: 4250 kg Pallet load: max. 850 kg year of construction: 2011 Pallet spaces: 600 Rack is dismantled and ready for loading in Neuwied Prices plus VAT.

Condition: excellent (used), Year of construction: 1986, bore diameter 65 mm throat 380 mm Control PLC-Steuerung bore spindle turning speed range 63 - 1600 U/min table-size 630 x 500 mm rapid traverse Z-axis 4,75 m/min boring feeds: 0,05 - 0,56 mm/U total power requirement 9 kW weight of the machine ca. 2,0 t dimensions of the machine ca. 1,50 x 1,20 x 2,95 m Drilling capacity in steel ST60: 65 mm Drilling capacity in cast iron GG20: 80 mm Thread cutting ST60: M68 Thread cutting GG M72 SPS-controlled automatic drilling machine with Drilling/deep hole drilling/thread cutting Sequence: 1st rapid traverse to start position 2. switch on the speed 3. switch on the drilling feed 4. drilling until the drilling depth is reached 5. return in rapid traverse to start position Manual operation possible (speed and direction of rotation, rapid traverse positioning, Cgjloucgqqjq D Tufst Switching the drill feed on/off) Selection of the drill feeds and spindle speed manually via gear shift. Pole-changing motor with 1,500/3,000 rpm. with mechanical overload clutch

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, 3x VE20 Microbond SCI 3x New Colsr Rdd Njq D Tufogt The parts have been in operation for approximately 200-300 hours. The MICROBOND CSI system, consisting of a feed unit, control system, and high-performance generator, guarantees consistent welding quality. Robust yet highly precise mechanics enable constant gap control thanks to the patented MicrogapControl gap control system. The MICROBOND control system controls and visualizes this continuous joining process. Constant amplitude output and high continuous sound power enable process speeds of up to 800 m/min.

Condition: excellent (used), Year of construction: 1979, Rope Production line / Strand Rewinding line REDAELLI Line STABILISED CONCRETE PRE-STRESSING STRAND 3-wire and 7-wire strands which use with beams covering long spans, bridge elements, large pre-stressed elements, e.g. floor elements, piles, pre-tensioned and post-tensioned structures. - Year -1979/2005 - Pay of spool size - 800x900 mm - ⁠Range of strand production : - 3/8 - 1/4 - ⁠1/2 - 5/16 - ⁠6/10-7/16 - ⁠7/10-9/16 - Coil Weight - 4.000 kg - ⁠speed - 40-60 m/min. - ⁠High carbon steel wire - ⁠PC Stand size: - ⁠6.4,6.9,9.3,21.5 mm - ⁠Electrical supply - 400 kW Cjlqet Iq Hbj D Tufjgt Line Consists : Wire Pay Of Wisting Unit Furnace Cooling System Traction Rollers Winding the Rope

Year of construction: 2023, Condition: ready for operation (used), Two unused Allweiler and KSB pumps are available. 1) Thermal oil centrifugal pump Allweiler NIT 50-200U5 AW4, year of manufacture: 2023, flow rate: 40m³/h, delivery head: 54m, power: 7.4kW, speed: 2900rpm, pumped medium density: 0.75kg/dm³, viscosity: 1mm²/s, pipe diameter: 203mm. 2) Reconditioned cooling water pump KSB Etabloc, year of construction: 2021, flow rate: 26m³/h, delivery head: 15.5m, viscosity: 1mm²/s, speed: 2915rpm, MEI: 0.7, pipe diameter: 116mm. The KSB pump was overhauled in 2023. Documentation available. On-site inspection is possible. Cgslq D Tuewd S Uuefjt

Condition: used, Year of construction: 2017, Alzmetall GS800/5 5 Axis CNC Machining Centre (2017) 5 axis X-Axis 660 mm Y-Axis 800 mm Z-Axis 550 mm Interference circle diameter 800 mm Distance Spindle up to 650 mm Machine-Table Load 500 kgs Maximum rapid travel X/Y/Z at TCP max. 75 m/min Cutting-Tool Interface HSK-A63 Motor-Spindle-Power at CDF 25% max. 16 kW Variable Speed Range max. 10.000 mm-1 Motor-Spindle Torque at CDF 25% max. 102 Nm Heidenham touch screen control Wiring diagram : 2865-95-653991 Machine weight 13,000 kgs Resy filtration system Swarf conveyor Erowa pallet changer model RobotEasy Serial number ERE.3048 Cgelq Dewa Sy Ao Tufot Year 2017 Weight 1300kgs

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system - Lighting Cjlswd Ii Usq D Tufjgt - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: used, thickness of jaw 128 mm Colq D Top Sgbyoufogt 42 mm clamping width 205 mm clamping capacity 3,7 t weight 27 kg dimensions of the machine ca. 550 x 125 x 120 mm

Condition: excellent (used), Year of construction: 2006, X 610 Y 405 Z 510mm, ISO 40, cooling trough spindle, Fagor 8055 Cgjlq D Tstiybqeufot

Condition: excellent (used), Year of construction: 2007, - Control unit FAGOR 8055 - max. turning Ø: 550 mm - max. turning length: 2000 mm - Tool turret with 8 stations - travel: X= 300, Z= 2150 mm - Quill travel: 150 mm Cslqett Ddrj D Tufogt - Dimensions LxWxH: 4200 x 2100 x 2050 mm - Weight: 4,900 kg Accessories: - 2 steady rests - various tools

Condition: as good as new (ex-display), Year of construction: 2025, Available now! Tank capacity: 192L Celq D Tsf A Eg Djufsgt External dimensions: 1330x945x1490mm Usable grate dimensions: 680x435x330mm Loading weight: 80kg Ultrasonic frequency: 40kHz Ultrasonic power: 1200W Bag filter: YES Automatic filling: YES Pump-based emptying: YES Insulated lid: YES

Condition: used, Year of construction: 2018, Alzmetall GS600/5-T 5 Axis CNC Machining Centre (2018) X-Axis 460 mm Y-Axis 600 mm Z-Axis 400 mm Interference circle diameter 640 mm Distance Spindle Up to 550 mm Machine-Table Load 500 kg Maximum rapid travel X/Y/Z at TCP max. 75 m/min Cjlq D Tujwa Sycofsgt Cutting-Tool Interface HSK-A63 Motor-Spindle-Power at CDF 25% max. 26 kW Motor-Spindle Torque at CDF 25% max. 116 Nm Wiring diagram : H5774-95-2845 Machine weight 7000 kgs Resy filtration system Model: KBF - 452/500 Serial number 18-P02571 Swarf conveyor and Tolley Erowa pallet changer Model :RobotEasy Serial number : ERE 4045 Year 2018 Table size 31.5 inches (800 mm) Tool changer capacity 32 tools

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Nedcon Type: NS Colq Dev T Iwrs Tufjgt Technical specifications for installation: Number of rack rows: 1 Length per rack row: 10,100 mm Number of bays per rack row: 5 Number of levels plus floor level: 5 Technical specifications for volume: Pallet spaces per bay: 12 Number of pallet spaces per row: 60 Total number of pallet spaces: 60 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): 1,000 kg Delivery includes: 6x pallet rack uprights, used Material color: cream-white Frame profile: 1007825 Profile dimensions: 100 x 78 x 2.5 mm Adjustment pitch: 50|50 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled (screwed framework) Upright height: 9,000 mm Upright depth: 1,100 mm 50x pallet rack crossbeams, used Material color: RAL 2008 orange Box profile: 90 x 40 mm Hooks: 4 HK (hooks) Clear width: 1,900 mm Max. load per pair of crossbeams: 2,000 kg at constant load. Distributed load 100x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x leveling plates, used Design: Fully galvanized For leveling shelf supports that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, thickness of jaw 125 mm 42 mm clamping width 205 mm clamping capacity 4,7 t weight 27 kg Cgjljp Sgb Doq D Tufst dimensions of the machine ca. 550 x 125 x 120 mm

Condition: used, Year of construction: 2022, 5 axis X-Axis 800 mm Y-Axis 800 mm Z-Axis 600 mm Interference circle diameter 1070 mm Distance Spindle Up to 823,5 mm Machine-Table Load 1000 Kg Maximum rapid travel X/Y/Z at TCP max 75 m/min Cslq D Tuewa Sv Dofegt Cutting-Tool Interface HSK-A63 Motor-Spindle-Power at CDF 25% max 50kW Motor-Spindle Torque at CDF 25% max 187 Nm Wiring diagram :H65262-95-2527 Machine weight : 16500 kgs Filtration system Model : MS-syst-00013 Serial number : 1088377 Lahntechnik Chiller unit Model : BL 058-345 Serial number : E-50681 Year 2022 Swarf conveyor and trolley Indunorm pallet changer Year 2023 Serial number ALZ300-003 Weight 2250 kgs

Condition: used, thickness of jaw 160 mm 53 mm clamping width 305 mm clamping capacity 5,7 t Cgjlqep S Dcds D Tufjt weight 60 kg dimensions of the machine ca. 700 x 160 x 145 mm