Fuel oil tank storage tank tank system tank

Year of construction

2004

Condition

Used

Location

Warstein

Fuel oil tank storage tank tank system tank

Machine data

Machine type:: Fuel oil tank storage tank tank system tank

Year of construction:: 2004

Condition:: used

Price & Location

Location:: Enkerbruch 2, 59581 Warstein, Deutschland

Call

Details about the offer

Listing ID:: A299-0561

Update:: 23.05.2024

Description

Tank & Environmental Protection Wozniack – Specialist Company in accordance with the German Water Resources Act

Dear Sir or Madam,
Kljdpec Nktbefx Achjw

We offer a 30,000-liter double-walled storage tank for diesel storage, complete with a new diesel dispensing pump including data recording.

Nominal capacity: 30 cubic meters
Quantity: 1
Used, but fully overhauled, meaning the container has been cleaned, refurbished, primed, and painted.
Color: RAL paint; however, you can specify your own color preferences at any time.
The system is primed and will be painted.
Material: Steel in steel, material S235JRG2
Documentation: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate
Quantity: 1 dipstick
Quantity: 1 vent pipe
Quantity: 1 fill pipe
Quantity: 1 new level sensor
Quantity: 1 new leak detection device with leak fluid
Quantity: 1 ladder
Quantity: 1 suction line
Shape: Cylindrical storage container with feet/console
Container dimensions: Length approx. 9,990 mm
Diameter approx. 2,000 mm
Weight approx. 6,000 kg
Storage: Above ground

Of course, you can also customize your tank system!

All our systems are thoroughly inspected and checked by selected employees in our company.

We also offer cost-effective delivery upon request.

You can inspect our systems at any time.
We have other tank systems for above-ground and underground storage in all sizes, which are available for sale on our premises.

All our tank systems can also be offered without a diesel pump.

Currently on offer: Liquid fertilizer – AHL tank systems in sizes from 10,000 to 100,000 liters.
Water tank / fire water tank also on offer.

Price / Shipping

The price for the tank system applies ex works Warstein, unloaded.
Delivery can be offered at a reasonable cost for an additional charge.
Delivery time: Immediately

You will receive an invoice with VAT shown.

In addition, we purchase existing tank systems and, as an authorized specialist company in accordance with the German Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them.

Sincerely,
from Warstein

Tank & Environmental Protection Wozniack
Enkerbruch 2
59581 Warstein

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2015

35 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

Fax:

These listings may also fit your interest.

Auction

Laser cutting machine Trumpf TruLaser 5040

Bayern

8,052 km

Laser cutting machine
TrumpfTruLaser 5040

€7,500

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0250A0472, laser power: 5,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, TECHNICAL DETAILS Travel range, X-axis: 4,000 mm Travel range, Y-axis: 2,000 mm Laser power: 5,000 W MACHINE DETAILS Ksdpfxjzkr T Us Achslw Mains voltage: 400 V / 50 Hz Connected load: 105 kVA Control voltage: 24 V DC Required fuse rating: 3 x 160 A Compressed air connection: 7 to 10 bar Nitrogen connection N₂: 30 bar Oxygen connection O₂: 20 bar

See details

Auction

Sheet metal deburring machine Arku EdgeBreaker 4000

Bayern

8,052 km

Sheet metal deburring machine
ArkuEdgeBreaker 4000

€69,000

To the auction

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: M704025, sheet thickness (max.): 100 mm, overall weight: 4,650 kg, passage width: 1,300 mm, TECHNICAL DETAILS Material thickness: 0.8 to 100 mm Passage width: max. 1,300 mm Workpiece dimensions: min. 180 x 100 mm Workpiece weight: max. 250 kg/m Ksdezkr Rtjpfx Achelw Feed rate: 0.2 to 6 m/min MACHINE DETAILS Dimensions & Weight Dimensions: 2,200 x 2,900 x 2,200 mm Machine weight: approx. 4,650 kg EQUIPMENT Processing: on both sides, dry

See details

Auction

Nordrhein-Westfalen

7,759 km

Wood shredder
ReinboldAZR 1800 S

€29,000

To the auction

Condition: ready for operation (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, machine/vehicle number: 07/21/158, power: 55 kW (74.78 HP), fuel type: electric, hopper volume: 2,800 l, rotational speed (max.): 90 rpm, rotor diameter: 500 mm, The machine has been used very little and is therefore in good condition with new blades! TECHNICAL DETAILS Infeed and Hopper Infeed opening: 1,800 x 1,500 mm Hopper capacity: 2.8 m³ Rotor Rotor diameter: 354 - 500 mm Rotor speed: approx. 90 rpm Tools and Screening Tools V5 + V7: 45 / 90 / 135 / 180 pcs. Screen opening: 10 - 50 mm Extraction Extraction nozzle diameter: 250 mm Air velocity: 32 m/s MACHINE DETAILS Klodpezkg Sfofx Achow Performance and Drive Power: 55 kW (74.78 hp) Fuel type: electric Power requirement, dual drive: 2 x 45 / 2 x 55 kW Weight: approx. 5,800 kg EQUIPMENT Rotor shaft made of solid steel Hydraulic feed for constant material flow to the rotor Cardan-mounted hydraulic cylinders to prevent premature wear of the piston seals Screens with various screen openings for the required chip size, depending on the material and application Safety package with gearbox limit switch and reversing counter Changeable basket available New blades Note: Further technical information, such as the machine dimensions, can be found in the attached data sheet.

See details

Auction

Vertical machining center HURCO VTXZ 2000

Bayern

8,197 km

Vertical machining center
HURCOVTXZ 2000

€9,000

To the auction

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces, 35x72) Rotary table adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Kodpfx Acezka Hiohjlw Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter with full occupancy: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in the table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hours Spindle hours: approx. 5,000 hours Further technical data can be found in the attached documents.

See details

Auction

Vertical machining center Hedelius C 60 Alpha

Bayern

8,197 km

Vertical machining center
HedeliusC 60 Alpha

€11,000

To the auction

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control system (PCU 50) was replaced in March 2024! The machine spindle was replaced after approximately 5,500 operating hours! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool slots in the tool magazine: 30 Kljdpfx Acszka Akjhsw MACHINE DETAILS Control system: Siemens 840 D Operating hours Control system operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling, 20 bar, with dual switching filter Documentation: Hedelius + Siemens Sinumerik Infrared probe: Renishaw

See details

Auction

England

7,199 km

Industrial robot
KUKAKR6 R700

€5,250

To the auction

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 504.856, overall weight: 50 kg, load capacity: 6 kg, arm reach: 700 mm, controller model: KRC4, TECHNICAL DETAILS Load capacity: 6 kg Reach: 700 mm MACHINE DETAILS Kodpozidmqjfx Achslw Controller: KRC4 Weight: 50 kg Performance data Connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A

See details

Auction

England

7,199 km

Industrial robot
KUKAKR 20 R1810-2

€9,000

To the auction

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1.302.981, overall weight: 280 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller model: KR C4 NA UL, TECHNICAL DETAILS Load capacity: 20 kg Reach: 1,813 mm MACHINE DETAILS Controller: KR C4 NA UL Klsdpfjzidhuex Achew Total weight: 280 kg Operating hours: approx. 500 hours EQUIPMENT Teach pendant (manual control) Safety enclosure with Siemens PLC 2 × SICK laser scanners 4 × Light curtains

See details

Auction

Satellite blasting system Nicolis Satellite Blasting System

Solothurn

7,952 km

Satellite blasting system
NicolisSatellite Blasting System

€10,000

To the auction

Condition: excellent (used), functionality: fully functional, overall weight: 1,100 kg, workpiece width (max.): 230 mm, workpiece height (max.): 320 mm, No minimum price – guaranteed sale to the highest bidder! The system was only used for demonstration and testing purposes and is therefore in very good condition. TECHNICAL DETAILS Number of satellites (workpiece holders): 6 Number of spray nozzles: 6 Maximum workpiece height: 320 mm Maximum workpiece width: 230 mm Movement: Rotational movement of the satellites, horizontal up/down movement Settings: Adjustment of the number of strokes, speed, and height of the lifting movement MACHINE DETAILS Control system: PLC Siemens Kjdpfozh Nggsx Achjlw Total weight: 1,100 kg EQUIPMENT Light curtain

See details

Auction

Sandblasting unit Turbotechnika DELTA 250 GR 7/10

Solothurn

7,952 km

Sandblasting unit
TurbotechnikaDELTA 250 GR 7/10

€14,000

To the auction

Condition: ready for operation (used), Year of construction: 2008, operating hours: 2,288 h, functionality: fully functional, machine/vehicle number: 936, workpiece weight (max.): 150 kg, power: 8 kW (10.88 HP), workpiece length (max.): 800 mm, workpiece width (max.): 600 mm, number of support arms: 16, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with an optional support system and can therefore accommodate one large workpiece or a maximum of 16 smaller workpieces on the supports. TECHNICAL DETAILS Turbine power: 8 kW Workpiece size (single workpiece) max.: 800 x 600 mm Workpiece weight (single workpiece) max.: approx. 100 kg Number of positions in the support system: 16 Workpiece size (on support system) max.: 200 x 200 mm Workpiece weight (on support system) total max.: 150 kg Filter data Number of filter cartridges: 2 Total filter area: 20 m² Filter area per filter cartridge: 10 m² Air velocity: 1.25 m/min Compressed air data Compressed air pressure: max. 4–5 bar Compressed air consumption: approx. 7 m³/h Compressed air connection: G 1″ Permissible negative pressure: max. 1,500 Pa Dust container: 20 l Residual dust content in the exhaust air: below 5 mg/m³ MACHINE DETAILS Control unit: Pulse/time: 24 V, 1 phase, 50 Hz Solenoid valves: Voltage: 24 V, 50 Hz Timer: Input/output voltage: 24 V, 50 Hz Operating hours: 2,288 h Kodpfjzh Nf Ajx Achslw Fan data Air flow: 2,000 m³/h Static pressure: 1,800 Pa Total pressure: 2,000 Pa Power consumption: 2.2 kW Motor power: 1.1 kW Motor voltage: 400 V Motor frequency: 50 Hz Motor phases: 3 phases EQUIPMENT Filter cartridges with 10 m² filter area each Aluminum venturi tubes Solenoid valves, type CA 25 DD Timer CG 03.06/04 Filter group Pressure regulator Pressure gauge 1″ ball valve Dust container, 20 l Fan

See details

Auction

Parts cleaning machine Karl Roll RCTS PETITE / 2

Sachsen

8,031 km

Parts cleaning machine
Karl RollRCTS PETITE / 2

€35,000

To the auction

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, workpiece weight (max.): 15 kg, inner dimension height: 95 mm, inner dimension length: 260 mm, negative pressure: 10,000 Pa, No minimum price – guaranteed sale to the highest bidder! Cleaning machine as a single-chamber flood system operating under full vacuum. Kedpfezh Eiqsx Achslw The machine will undergo a complete overhaul in 2026 with an estimated value of €16,800 and is in very good condition. The original new price of the machine was €104,000. TECHNICAL DETAILS Cleaning medium: halogen-free hydrocarbon or modified alcohol Cleaning basket dimensions: 260 x 160 x 95 mm Batch weight max.: 15 kg MACHINE DETAILS Overall length: 1,260 mm Overall width: 1,110 mm Overall height: 2,600 mm Total weight: 1,600 kg EQUIPMENT CE marking in roll-on/roll-off standard version Complies with the 31st German Federal Immission Control Ordinance (BImSchV) (as of August 21, 2011) Complies with the Swiss Air Pollution Control Ordinance (as of March 1, 1998) Complies with the Austrian VAV Ordinance (as of July 26, 2022) Complies with the EU VOC Directive 199/13

See details

Advertise here