Tipper

Condition: ready for operation (used), Year of construction: 2023, operating hours: 119 h, functionality: fully functional, machine/vehicle number: 217, fuel tank capacity: 500 l, conveyor belt speed: 3,000 mm/s, filling opening width: 3,374 mm, Doppstadt Inventhor 6 with only 119 operating hours and comprehensive additional equipment! TECHNICAL DETAILS Number of shredding teeth: 20 Shredding system type: Size L Feed hopper loading height: 3,650 mm Feed hopper loading width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Belt speed: 1.25 – 3.0 m/s Cross conveyor length: 2,900 mm Cross conveyor width: 800 mm MACHINE DETAILS Chassis: 3-axle drawbar trailer unit Drive Engine type: Diesel-hydraulic Brand: MTU 6R1000 Rated power: 260 kW (353 hp) Emission standard: Stage V Fuel tank capacity: 500 l Transport dimensions (L x W x H): 9,141 x 2,540 x 3,604 mm Permissible total weight: 25,000 kg Permissible axle load: 9,000 kg per axle Operating hours: 119 h EQUIPMENT Basic Inventhor Type 6 package Load-sensing system Centrally arranged lubrication strips 24-V electric control - additional electric pump for operating the following functions when the engine is off: - Raise/lower/fold rear discharge conveyor - Open/close comb flap - Open/close comb - Raise/lower folding hopper Full radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Shredding system Size L - 20 teeth Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Hydrostatic drive Ihodpoyg Iraefx Afasu 350 mm hopper extension, dual-sided watering provision 7 m rear discharge conveyor Neodymium cross belt magnet Frame for 7 m cross belt magnet

Condition: ready for operation (used), functionality: fully functional, controller manufacturer: Klöckner-Möller und SPS-Siemens, workpiece length (max.): 2,500 mm, workpiece weight (max.): 50 kg, stack height: 1,200 mm, Auction of a feeding and stacking system for the furniture industry! Bargstedt TBH20/ER/25/08/S (single-sided feed station, machine no. 0-280-07-7582) 1 powered stacking roller conveyor 1 lifting table with powered stacking roller conveyor 1 vacuum suction carriage (minimum workpiece dimensions 280 x 230 mm) 1 stripping wall 1 central thickness adjustment for the suction carriage 1 height-adjustable belt conveyor 1 infeed roller conveyor with skewed support rollers Vacuum crossbeam (2-lane operation, max. 4 parts in sequence) TECHNICAL DETAILS Stack height: 1200 mm Stack change time: 35 seconds Basic cycle output max.: 17 cycles/min Max. workpiece weight: 50 kg Max. workpiece length: 2,500 mm MACHINE DETAILS Control: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (turning station from longitudinal to transverse, machine no. 0-282-07-7584) TECHNICAL DETAILS Ihjdpfx Afoyg Haieasu Roller diameter: 65 mm Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: stepless from 10 - 50 m/min MACHINE DETAILS Total connected load: 2 kW Air consumption: 27 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (turning station from transverse to longitudinal, machine no. 0-282-07-7585) TECHNICAL DETAILS Roller diameter: 65 mm Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: stepless from 10 - 50 m/min MACHINE DETAILS Total connected load: 2 kW Air consumption: 1 NL/min Bargstedt TSH20/ER/25/08/S (single-sided stacking station, machine no. 0-281-07-7589) 1 height-adjustable single panel transport 1 vacuum suction carriage (minimum workpiece dimensions 280 x 230 mm) 1 central thickness adjustment for the suction carriage, adjustable for panel thickness to take over the panels 1 lifting table with powered stacking roller conveyor 1 powered stacking roller conveyor, placed behind the stacking station Vacuum crossbeam (2-lane operation, max. 4 parts in sequence) TECHNICAL DETAILS Stack height: 1200 mm Stack change time: 35 seconds Basic cycle output max.: 17 cycles/min Max. workpiece weight: 50 kg Max. workpiece length: 2,500 mm MACHINE DETAILS Control: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Workpiece length: min. 250 – max. 2500 mm Workpiece width: min. 70 – max. 1000 mm Workpiece thickness: min. 4 mm – max. 80 mm Workpiece stacking: max. 2 pieces Vertical Drilling Unit 2V21 HIGH SPEED 7500 Feed stroke (Z-axis): 60 mm Drilling depth: max. 38 mm Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 35 mm Spindle distance: 32 mm Spindle type: individually controllable Horizontal Drilling Unit 2H4X/1Y 4 drilling spindles each in X-direction 1 drilling spindle each in Y-direction Drilling depth: max. 38 mm Drilling height (Z-axis): 38 mm from top edge of workpiece Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 20 mm Spindle type: individually controllable Grooving Saw Unit N2 X-Y 90° Cutting depth: 30 mm Machining cross-section: max. 70 mm² Speed: 1,500 – 7,500 rpm, frequency-controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Ijdeyg E R Hopfx Afajhu Milling Unit F2-ETP-6 KW Tool holder: for shaft diameter d = 25 mm Maximum tool diameter: 60 mm Tool clamping length: min. 65 mm / max. 95 mm Maximum tool weight: 2.5 kg Tool change: manual, ETP 25 hydro quick-clamping system Direction of rotation: clockwise/counterclockwise Speed: 6,000 – 18,000 rpm, steplessly programmable Drive: frequency-controlled three-phase motor Max. output at tool: up to 5/6 kW in continuous / intermittent operation (S1/S6-50%) EQUIPMENT Material infeed "IgeL-ROBOT" Lower machining support Upper machining support Vertical drilling unit 2V21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90° Milling unit F2-ETP-6 KW Barcode reader Manufacturer: Datalogic

Condition: ready for operation (used), functionality: fully functional, working width: 1,300 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, The auction consists of: CEFLA FEV E Dryer: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW CEFLA Cooling Zone: AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU CEFLA TR 3000 Roller Conveyor CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW Note: The paint booth visible in the video is not included in the scope of delivery or sale. TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Pass-through working height: 80 mm Fan throughput: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 7,500 x 1,783 mm Emitted solvent-containing air: 0-4,000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Pass-through working height: 80 mm Fan throughput: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 7,500 x 1,783 mm Emitted solvent-containing air: 0-4,000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan Cooling Zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU TECHNICAL DETAILS Ihodpfx Afjyg Eynsaeu Usable width: 1,300 mm Pass-through working height: 80 mm Maximum tunnel height: 1,780 mm (excluding conveyor) Maximum air knife outlet speed: 32.5 m/s Fan power (supply/recirculation): 3 kW Fan power (exhaust): 1.5 kW Air throughput (supply/recirculation fan): 6,000 m³/h Air throughput (exhaust fan): 6,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch Dimensions (L x W): 3,000 x 1,783 mm EQUIPMENT TT 4000 bar conveyor with double chain, steel guides, and chrome-plated bars CEFLA TR 3000 Roller Conveyor MACHINE DETAILS Overall length: 3,000 mm EQUIPMENT Photoelectric sensor for thin panels, thickness 4 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2007.10.191, grinding width: 1,350 mm, grinding belt length: 4,800 mm, workpiece height (max.): 150 mm, grinding belt width: 1,400 mm, Sanding Machine + Dust Extraction Unit TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 880 mm Workpiece thickness: 3 - 150 mm Transport bed: continuous conveyor belt Transport bed drive: 4.0 kW / frequency converter 7.5 kW Feed speed: 3 – 15 m/min Drive, workpiece suction clamping system: 7.5 kW Units: 3 x cross, 1 x longitudinal, 1 x brush Cross and longitudinal sanding units Cross sanding unit – sanding belt dimensions: 4,800 x 150 mm Belt speed: 2–20 m/s Drive power per cross sanding unit: 15 kW Pressure lamella belt dimensions cross sanding: 4,350 x 140 mm Longitudinal sanding unit – sanding belt dimensions: 2,620 x 1,400 mm Belt speed longitudinal sanding: 1.8 – 16 m/s Drive power longitudinal sanding: 15 kW Pressure lamella belt dimensions longitudinal sanding: 1,900 x 1,380 mm Brushing unit Brush roller diameter: 120 mm Drive power: 0.75 kW Air requirement Air requirement, cross sanding units: 91.5 m³/min Air requirement, longitudinal sanding unit: 30.5 m³/min Air requirement, brushing system: 18.0 m³/min Air requirement, conveyor belt extraction: 13.5 m³/min Air exhaust, workpiece suction clamping system: 40.0 m³/min Total air requirement: 193.5 m³/min Total compressed air consumption: 115 m³/h MACHINE DETAILS Total connected load: approx. 80 kW Operating voltage: 400 V Frequency: 50 Hz Main machine dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dust Extraction Unit EA 8 – Machine No.: 2007.10.192 Sanding width: 1,350 mm Working height: 880 – 920 mm Workpiece thickness: 3–150 mm Required air speed: 20 m/s Air requirement: 30.5 m³/min Transport bed drive: 1.1 kW / frequency converter 2.2 kW / 0.75 kW Isdpsyg Exqjfx Afaehu Feed speed: 3–15 m/min Fan drive: 5.5 kW Drive, height adjustment: 0.18 kW Power connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dust extraction unit EA 8 - Workpiece suction clamping system - Several cross and longitudinal sanding units - Brushing unit

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,416 h, laser power: 3,200 W, sheet thickness steel (max.): 10 mm, sheet thickness aluminum (max.): 4 mm, pipe diameter (max.): 152 mm, working length: 6,500 mm, TRUMPF Tube Laser Cutting System with LoadMaster Tube 6.5 m and extensive additional equipment! TECHNICAL DETAILS Maximum tube diameter: 152 mm Maximum working length: 6,500 mm Material thickness (steel): 10 mm Material thickness (stainless steel): 5 mm Material thickness (aluminum): 4 mm Laser power: 3,200 W MACHINE DETAILS Control system: SIEMENS Sinumerik 840D SL Operating hours: 24,428 / 8,416 h EQUIPMENT - LoadMaster Tube 6.5 m with bundle magazine - Robust machine frame with integrated laser unit - Feed station with self-centering clamping jaws - Raw material tube support with automatically retractable pipe rests - Through-feed chuck with self-centering parallel clamping rollers - High-precision drives - Discharge station for finished workpieces up to 3 m in length - Tube support for finished parts with extendable guide rollers - Scrap conveyor with collection bin - Enclosed beam guide - NitroLine - FocusLine - Laser power control - Programmable cutting gas pressure - Automatic power on/off - Ergonomic control panel with touch color screen - Work area illumination - High-frequency excitation - Maintenance-free turbo radial blower - TASC 3 laser control - Laser logbook function - Cooling unit - Single cutting head strategy - Lens cutting head, 155 mm focal length - ControlLine - Simple operation - Online support - Diagnostic functions Ihedeygu Tkjpfx Afaeu - Integrated technology data - Remote service via internet - RJ45 network interface and USB port - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, and cooling water, among others - Compact dust extraction system - Protective enclosure with polycarbonate (Makrolon) panels - Jaw sets with clamping range 20–85 mm and 85–152 mm - Quick-change forming shells for round tubes up to 152 mm - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 85 mm) - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 170 mm) - Guide rollers for round and rectangular tubes - SeamLine Tube with inner seam detection - Adaptive clamping technology – feed station, small circumscribed circle - Adaptive clamping technology – feed station, large circumscribed circle - Adaptive clamping technology – through-feed chuck, small circumscribed circle - Adaptive clamping technology – through-feed chuck, large circumscribed circle Note: The machine will be dismantled on 02/03/2026 and can be inspected under power until then.

Year of construction: 2001, operating hours: 100,290 h, condition: ready for operation (used), functionality: fully functional, controller model: Simcon/32-NET Version 00.1902, inner dimension height: 750 mm, inner dimension length: 615 mm, inner dimension width: 580 mm, usable tank capacity: 270 l, machine/vehicle number: 58226018400020, TECHNICAL DETAILS Temperature range: -70 °C to 180 °C Test chamber volume: 270 L Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time: 0.1 to 0.5 K Temperature spatial uniformity: 0.5 to 2.0 K Test chamber dimensions (W x D x H): 580 x 615 x 750 mm MACHINE DETAILS Overall dimensions (D x W x H): 2,080 x 895 x 1,950 mm Voltage: 3/N/PE AC 400 V ±10% 50 Hz Nominal power: 14 kW Nominal current: 26 A Refrigerant: R-404A / R-23 Control system: Simcon/32-NET Version 00.1902 EQUIPMENT Door with window Ihodoyfud Tjpfx Afaju Interior lighting Water cooling Feedthroughs left: 2x NW 50 mm Feedthroughs right: 3x NW 125 mm Compressed air dryer type: ZANDER

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, overall weight: 37 kg, load capacity: 10 kg, arm reach: 901 mm, positioning accuracy: 0.03 mm, Auction of a set of 7 KUKA KR 10 R900-2 robots! TECHNICAL SPECIFICATIONS Payload: 10 kg Arm reach: 901 mm Repeatability: 0.03 mm MACHINE DETAILS Ihsdpsyft U Djfx Afasu Controller: KRC4 compact Net weight: 37 kg Areas of application: Handling, assembly, packaging, machine tending, small-lot production Protection class: IP65 SCOPE OF DELIVERY (per robot) KUKA industrial robot KR 10 R900-2 KUKA control unit KRC4 compact KUKA SmartPad (operator panel) Set of connection cables

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06-00376, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 150 mm, control type: CNC control, TECHNICAL DETAILS Measuring range X-axis: 400 mm Measuring range Y-axis: 400 mm Measuring range Z-axis: 150 mm Measurement accuracy: Length measurement deviation up to approx. 1.5 µm MACHINE DETAILS Control: CNC Software: WinWerth, version 8.40 or higher Tool holder / probe: Renishaw, MK 2 Probe system: Renishaw Probe Interface PI 200 Voltage: 230 V AC Frequency: 50 Hz Current consumption: max. 10 A EQUIPMENT Granite machine with measuring glass and cover CNC control with scope controller Ihodpfxjyft Tmj Afaju Renishaw probe (various probe inserts included) PC workstation User manuals (WinWerth) Calibration and test reports Folder with machine and measurement room documentation Software and calibration data carriers (CD/DVD) Control cabinet integrated, main switch available

Condition: not inspected (used), Year of construction: 2020, functionality: unexamined, overall weight: 1,068 kg, load capacity: 210 kg, arm reach: 2,696 mm, controller model: KUKA KR C4, Auction of a set consisting of 3 KUKA KR 210 R2700 extra and 1 KUKA KR 210 R2700 extra FLR! Serial numbers: 8104130 / Year: 2020 Serial number: 1348207 / Year: 2020 Serial number: 1348187 / Year: 2020 Serial number: 8101962 / Year: 2020 TECHNICAL DETAILS Payload: 210 kg Reach: 2,696 mm Iodpsyft N Uefx Afashu MACHINE DETAILS Controller: KUKA KR C4 Weight per robot: approx. 1,068 kg Power supply: 3 × 400 V / 50–60 Hz EQUIPMENT 4 KUKA KR 210 R2700 extra / FLR industrial robots 4 KUKA KR C4 control cabinets 3 KUKA SmartPad (pendant) 4 robot controller cable sets Note: 2 robots are each missing 2 KSP modules in the control cabinet. 1 robot is missing 1 KSP module and the pendant.