Storage wine tanks different volumes

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar Tjdpfx Ajzln D Eedqoa EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Swing over bed 1,300mm, over cross slide 1.000mm, swing in gap 2,100mm, center distansen 1,500mm, 2,350mm with open bed. Spindle bore 128mm, 450 Rpm, 50 Kw, Chuck 800mm, 4-jaw plate 900mm. Fagor CNC, weight ca 12.000kg Todpfexqp I Nox Adqoa

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Tsdpfx Adjzlnxioqja Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, power: 14 kW (19.03 HP), input current: 80 A, workpiece length (max.): 4,000 mm, machine/vehicle number: 6080008129, TECHNICAL DETAILS Maximum profile width: 130 mm Maximum profile height: 205 mm Maximum workpiece/profile length: 4,000 mm Processing capacity: 80 units Tjdpfxszlnvue Adqoa MACHINE DETAILS Connection: 3 N/PE 400 V Frequency: 50 Hz Current: 80 A Power: 14 kW EQUIPMENT Powered, continuously adjustable gripper Lifting function for smooth feeding Profile guidance on rollers Internal gripper to prevent damage to the profiles Integrated measuring sensors for workpiece length control Workpiece removal via outfeed table Portal design for high profile cross-sections Industrial PC with Windows operating system Barcode scanner

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director Tedpfxjrntiro Adqoa UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,125 h, load capacity: 8,000 kg, lifting height: 3,600 mm, mast type: duplex, fork length: 2,050 mm, overall weight: 13,948 kg, An oil change was performed before the sale. Only the hydraulic oil was not changed. The filters have been replaced. TECHNICAL DETAILS Load capacity: 8,000 kg with load center at 900 mm Residual load capacity with Kaup 10T160 fork positioner: 7,320 kg with load center at 900 mm Tractive force with/without load: 45.6 kN Lifting height: approx. 3,600 mm Fork length: approx. 2,050 mm MACHINE DETAILS Engine: LPG GM 5.7L V8 Cylinders: 8 Displacement: 5,700 cm³ Rated speed: 2,200 rpm Power: 85 kW Operating hours according to display: approx. 4,125 h Operation: Solo-Pilot with multi-function display Dimensions & Weight Tsdpfjzlhnqjx Adqsa Overall length including forks: approx. 5,950 mm Overall width: approx. 2,150 mm Height with mast retracted: approx. 3,160 mm Height with mast extended: approx. 4,960 mm Height above protective roof: approx. 2,705 mm Self-weight: approx. 13,948 kg EQUIPMENT Kaup 10T160 fork positioner Duplex mast 3rd + 4th control circuit Side shifter Solo-Pilot Single pedal control Work lights front and rear Full cabin with heater Note: The two tires on the steering axle, as well as the fork tines, should be replaced. This can be requested and carried out by the seller. Fork tine length would be selectable.

Condition: used, Year of construction: 2007, operating hours: 39,023 h, machine/vehicle number: 1315318, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 900 kg, No minimum price – guaranteed sale to the highest bidder! The machine has not been powered on for approximately one year. TECHNICAL DETAILS Laser power: 5,000 W Working area (X x Y x Z): 3,000 mm x 1,500 mm x 115 mm Sheet metal thickness, structural steel max.: 25 mm Sheet metal thickness, stainless steel max.: 20 mm Sheet metal thickness, aluminum max.: 12 mm Maximum workpiece weight: 900 kg Positioning speed max.: 300 m/min Tjdpozlhcnefx Adqsa Positioning accuracy: +/- 0.1 mm MACHINE DETAILS Control system: CNC Siemens Sinumerik 840 D Operating hours, laser on: 77,107 h Operating hours, beam on: 39,023 h Dimensions & Weight Machine dimensions (L x W x H): 11,100 mm x 4,600 mm x 2,400 mm Machine weight: 12,000 kg EQUIPMENT Automatic pallet changer NitroLine FocusLine PlasmaLine SprintLine ContourLine

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants Todpfxoxlngas Adqea - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner Tjdszhuyfjpfx Adqoa The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Tjdpfx Ajzmry Tsdqea Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Manufacturer: VDF WOHLENBERG Type: VDF Year of construction: 1954 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Spindle Diameter: Ø 80 mm Faceplate Speeds I: 355 RPM Tedpfx Aoxmd U Aodqoa Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 Tsdpfx Adozmryysqsa MACHINE DETAILS Control system: Heidenhain TNC 410 Clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant system with enhanced pump Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Operating hours Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system Tjdpfx Aszmrpuedqsa 4 height-adjustable machine feet Operating manuals

Condition: used, Year of construction: 2015, fuel type: diesel, weight max. in kg 2500 kg Tjdpfx Aet Symrsdqsa stroke 4150 mm load center 600 mm free lift 150 mm construction height 2814 mm fork length 1200 mm fork holder width 1150 mm Frame width 1050 mm daylight opening 110-1320 IK-IK mm

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, travel distance X-axis: 5,020 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 100 mm, controller model: Heidenhain 415 B, TECHNICAL DETAILS Spindle diameter: 100 mm Travel in X-axis: 5,020 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 2,000 mm Tool holder: SK 50 Tsdpfezlryqsx Adqja MACHINE DETAILS Control system: Heidenhain 415 B Rotary table dimensions: 2,500 x 2,000 mm EQUIPMENT Indexable milling head 2.5 60-position tool changer Rotary table manufacturer: Scharmann Note: The rotary function of the rotary table is defective. The machine is sold without pallet changers.