Diesel Fork Lift

Linde H16D-01

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 8,004 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,520 mm, fuel type: diesel, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,000 mm, empty load weight: 2,985 kg, total length: 2,200 mm, drive type: Diesel, construction width: 1,080 mm, Diesel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 18x7-8 Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 2 x 18x7-8 Hjdoz Hnv Uepfx Abgou Rear tire condition: 80 - 100% Battery year of manufacture: 2015 Additional single hydraulic circuit, integrated side shifter, windshield, roof window, roof guard, single-pedal operation, 2 work lights at the front

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required Hsdpfx Aboycvaqjgou The machine is fully operational and ready for immediate production The machine is available immediately

Condition: good (used), functionality: fully functional, Year of construction: 2014, operating hours: 5,477 h, load capacity: 1,600 kg, lifting height: 4,770 mm, fuel type: diesel, mast type: triplex, power: 26 kW (35.35 HP), total height: 2,150 mm, Equipment: lighting, pallet forks, sideshift, Linde H16D-01 diesel forklift Year of manufacture: 2014 According to the hour meter: 5,477 operating hours Hedpfx Abszyqfzegju 1.6 tons lifting capacity 2.25 meters overall height 4.77 meters lifting height 25 kW VW engine - Triple-stage free-lift mast - Side shifter - Cabin with heating - Work lights - Ready for immediate use! - Original paint! Selling price: €10,500 (net) Affordable delivery also possible!

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,927 h, load capacity: 1,600 kg, lifting height: 3,145 mm, free lift: 1,518 mm, fuel type: diesel, mast type: duplex, construction height: 2,121 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 2 = 1,000 – 2,500 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Sideshift, fork positioner, 3rd valve, 4th valve, heater, full cabin, air conditioning, Hsdpfx Aozvtx Asbgsu

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,750 mm, travel distance Y-axis: 1,870 mm, travel distance Z-axis: 700 mm, total length: 9,000 mm, table length: 4,000 mm, table width: 1,650 mm, total width: 3,500 mm, spindle speed (max.): 6,000 rpm, total height: 3,500 mm, distance between stands: 2,300 mm, rotational speed (max.): 6,000 rpm, overall weight: 30,000 kg, Equipment: rotational speed infinitely variable, X-axis: 3.750 mm Y-axis: 1.870 mm Z-axis: 700 mm CNC Controller: Heidenhain iTNC 530 Spindle nose: ISO 50 Spindle speed: 6.000 Rpm Toolchanger: 30 pockets Hodpfsyac T Ejx Abgeu Table size: 4.000 x 1.650 mm Distance between columns: 2.100 mm Featured with: - Vertical milling head attachement - Touch probe - Cooling throught spindle - Double chip conveyor - Cooling unit - Machine manuals Country of origin: Taiwan Machine LxWxH: 9000 x 3500 x 4000 mm +/- Machine weight: 30.000 kg

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,380 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: diesel, mast type: triplex, construction height: 2,121 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: Half cabin Hsdpozmbvqjfx Abgju Side shifter, 3rd valve,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,756 h, load capacity: 1,600 kg, lifting height: 3,850 mm, fuel type: diesel, mast type: simplex, construction height: 2,546 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Sideshifter, 3rd valve, heater, full cabin, Hjdpfx Abey Uf Ebogeu

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Hedpexlngaofx Abgeu Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 8,227 h, load capacity: 1,600 kg, lifting height: 5,050 mm, fuel type: diesel, mast type: simplex, construction height: 3,146 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Hedpfx Asy Si N Ssbgju Condition: Ready for operation and fully functional Technical condition: good Sideshifter, 3rd valve, heater, full cabin,

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,344 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: diesel, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Rear tire type: Superelastic Side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, STVZO compliant, full cabin, interior mirror, rotating beacon, plastic seat cushion, double pedal Hsdsyt Tl Sjpfx Abgju

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump Hodoxur E Sjpfx Abgsu - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 2,274 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: diesel, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,600 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Hsdpsyzk A Ssfx Abgsu Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Load guard, side shifter, 3rd valve, rear work light, front work light, heater, full cabin, interior mirror, rotating beacon, Fabric seat cushion, clipboard, Blue Spot rear, double pedal

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 14,961 h, load capacity: 1,600 kg, lifting height: 3,150 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,195 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Hsdpfx Abszhyrasgju Clamp fork, 3rd valve, 4th valve, rear work light, front work light, roof covering, windshield, heater, interior mirror, rotating beacon, sliding doors, plastic seat cushion, Linde Connect, BlueSpot front and rear, double pedal, dust protection

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Type: T 11 Year of construction: 1970 Type of control: Konventionell Hedpfx Aboxmd Uvogsu Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Swing diameter over cross slide: Ø 450 mm

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 9,756 h, load capacity: 1,600 kg, lifting height: 3,150 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,195 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Hjdpfx Abezhyq Aegsu Clamp fork, 3rd valve, 4th valve, rear work light, front work light, roof cover, windshield, heater, interior mirror, sliding doors, plastic seat cushion, Linde Connect, BlueSpot (front and rear), double pedal, dust protection