Warehouse lift

Kardex XP 500 C3000

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06007153/001, total height: 6,050 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 210 kg, construction height: 6,050 mm, input voltage: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial Number: 06007153/001 Year of manufacture: 2006 Total load capacity: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available upon request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (Height adjustable to available space) Power supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed; more or heavier trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Storage capacity with 36 trays: approx. 95 m², each tray approx. 2.64 m² - Electronic volume measuring system with 25 mm grid on the display - Access opening with sliding doors for protection of personnel and stored goods - C2000 Control System, with B/W OP2000 display - LED anti-glare lighting above access point - Toothed-belt drive for minimal noise - Toothed-belt drive for fastest order picking - Shelf spacing adjustable in 25 mm increments by configuring support profiles, ideal for high-density storage - Weight management system monitors the load per tray - Includes light pointer Price: On request only by e-mail Price: excluding VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from brands such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Fpedjxq Tbtepfx Aatsi Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: GG60SB-13594, total width: 4,030 mm, total length: 7,000 mm, overall weight: 2,500 kg, input current: 11 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 3,300 mm, feed length Y-axis: 6,100 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Bottero float cutting table (shapes) 2-19mm, max cutting size L6100x3300mm Dimensions: L7000xW4030mm, weight +/-2500Kg Fjdsxrmpmepfx Aatspi

Condition: used, Type Amb 6/4 VAI-Z In our assessment, the machine is in good used condition and can be inspected under power by appointment. Fedpfx Aasxzuyrotepi Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Tool turret TER Type:0.5.480.525 The article is used, comes from an industrial machine dismantling and was in operation until the dismantling. Please note that this is a sample image, which may have different traces of use and/or software. Brand names, trademarks and registered trademarks are the property of their legal owners and are used here for descriptive purposes only. Further information can be found on our homepage Fpsdpovi Hvlofx Aatoi *

Condition: like new (used), Year of construction: 2021, 1 machine sold, 3 remaining We are now offering four Vertical Lift Modules from SSI Schäfer, manufactured in 2021. The machines have been serviced by the manufacturer since installation and are therefore in excellent condition. Each unit is 2,335 mm wide and 2,712 mm deep, requiring only 6.33 m² of floor space. This makes them ideal for companies that need efficient, organized storage but have limited floor space. The Vertical Lift Modules are designed with two access openings — one at the front and one at the rear — allowing for easier and more flexible loading and picking. This configuration enables various processes, such as picking and loading, to take place simultaneously without interference. If required, one of the access openings can be closed off. Each machine is equipped with the optional LogiPointer, a light pointer that precisely indicates where each item should be retrieved. This reduces picking errors and increases operational efficiency. Please note: To use the LogiPointer, the unit must be connected to an ERP or a warehouse management system (WMS). Machine Specifications: Manufacturer: SSI Schäfer Year of Manufacture: 2021 Model: Logimat 1825-625-7950/220 Height: 7,950 mm Width (Machine / Tray): 2,335 mm / 1,825 mm Depth (Machine / Tray): 2,712 mm / 625 mm Number of Trays: Approx. 31 trays per Vertical Lift Module Maximum Tray Load: 220 kg Fpjdpfexwnzhex Aatei Power Supply: 3/N/PE 400V, 25A

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - center height : 175 [mm] - Table orientation : 9 [°] GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Right grinding wheels dimensions : 225 x 20 x 76,2 [mm] - Power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] - Boring for internal spindle : 90 [mm] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] TAILSTOCK - Internal cone : Morse 3 - Quill stroke : 30 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2860 x 1680 [mm] - Machine height : 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Kelco 5 display - Coolant tank * with paper filtering unit Fodszfqzajpfx Aatspi - 1 internal grinding spindle : 5400 [rpm] - Chuck 4 jaws - 1 three-key steady rest - Set of wheels

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 Fpjdpfxszhma Do Aatei (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: good (used), Year of construction: 2003, Megamat Type: FSE 7.0 2448/816-4710 Fsdoyh Ipfjpfx Aatjpi Equipment no.: 70.0096 Year of manufacture: 2003 Device height: approx. 4720 mm Device width: approx. 2850 mm Device depth: approx. 2760 mm Number of trays: 21 Tray width: approx. 2445 mm Tray depth: approx. 815 mm Tray height: approx. 30 mm Maximum tray load: 540 kg Total load capacity: 70,000 kg Colour: Anthracite

Condition: excellent (used), Grinding length 600 mm Grinding width 320 mm Max. workpiece height 500 mm Longitudinal table travel 750 mm Cross table travel 340 mm Grinding wheel diameter 350 mm Grinding wheel width 40 mm Fsdpow Hy Twefx Aatjpi Spindle speed 1500 rpm Vertical rapid traverse 400 mm/min Power 3.7 kW Automatic feed Magnetic chuck Coolant system Weight 2500 kg

Condition: good (used), functionality: fully functional, Year of construction: 2011, Forklift truck Jungheinrich TFG 690 9000 kg load capacity lifting height 6000 mm 85 kw gas drive Fodpfx Ajunzrbeatepi