Scissor Lifts

Genie GS4069RT

Condition: used, Year of construction: 2020, total length: 3,740 mm, - Arbeitshöhe max. 14,3m - Plattformhöhe max. 12,30 m - Plattformhöhe – eingefahren 1,65m - Plattformlänge – außen 2,79 m - Plattformausschub – Länge 1,52 m - Max. Personen auf der Plattform (innen/außen) 4/4 4/2 3/2 - Tragfähigkeit 363 kg - Tragfähigkeit – mit ausgefahrenem Plattformausschub 136 kg - Verfahrbar in voller Plattformhöhe 12,3m - Fahrgeschwindigkeit – eingefahren 5,6 km/h - Fahrgeschwindigkeit – ausgefahren 0,5 km/h - Steigfähigkeit - eingefahren 35% - Wenderadius – innen/außen 2,11m/ 4,6m - Hub-/Senkzeit 61/28 sec - Neigungs-Sensoraktivierung (Längsachse/Querachse) 3° / 2° - Nivellierung mit max. Abstützungen (Längsachse/Querachse) 5,3° / 11,7° Redpfxoxpx Tfj Abbot - Antriebsart Diesel - Kraftstofftank 37,9 L - Tankinhalt Hydrauliksystem (Hydraulikantrieb) 68,1 L - Max. Reifen-Traglast 1737 kg - Reifenkontaktdruck – vorne, Plattform ganz ausgefahren 657 kPa - Bodenlast 10,29 kPa - Geräusch-/Schalldruckpegel (Boden) 85 dBA - Geräusch-/Schalldruckpegel (Plattform) 79 dBA - Vibration < 2,5m/s

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Rotor diameter approx. 400 mm Rjdjtgqlyopfx Abbot Motor 75 kw Discharge via conveyor belt with magnetic roller

Condition: used, Year of construction: 2020, total length: 3,740 mm, - Arbeitshöhe max. 14,3m - Plattformhöhe max. 12,30 m - Plattformhöhe – eingefahren 1,65m - Plattformlänge – außen 2,79 m - Plattformausschub – Länge 1,52 m - Max. Personen auf der Plattform (innen/außen) 4/4 4/2 3/2 - Tragfähigkeit 363 kg - Tragfähigkeit – mit ausgefahrenem Plattformausschub 136 kg - Verfahrbar in voller Plattformhöhe 12,3m - Fahrgeschwindigkeit – eingefahren 5,6 km/h - Fahrgeschwindigkeit – ausgefahren 0,5 km/h - Steigfähigkeit - eingefahren 35% - Wenderadius – innen/außen 2,11m/ 4,6m - Hub-/Senkzeit 61/28 sec - Neigungs-Sensoraktivierung (Längsachse/Querachse) 3° / 2° - Nivellierung mit max. Abstützungen (Längsachse/Querachse) 5,3° / 11,7° - Antriebsart Diesel - Kraftstofftank 37,9 L - Tankinhalt Hydrauliksystem (Hydraulikantrieb) 68,1 L - Max. Reifen-Traglast 1737 kg - Reifenkontaktdruck – vorne, Plattform ganz ausgefahren 657 kPa - Bodenlast 10,29 kPa - Geräusch-/Schalldruckpegel (Boden) 85 dBA Redpfx Aoxpx Ivebbjt - Geräusch-/Schalldruckpegel (Plattform) 79 dBA - Vibration < 2,5m/s

Condition: used, mileage: 309,800 km, power: 315 kW (428.28 HP), first registration: 05/2001, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2025, color: white, gearing type: semi-automatic, emission class: euro3, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2001, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Actros 2543 6x2 Wiedemann Super 2000 10.0/6.5 Water Recovery Vehicle #509 Body Wiedemann enviro tec Super 2000 10.0/6.5 water recycling system 10,000 liter tank capacity (sludge) 6,500 liter clean water tank (flush water compartments) Discharge by tilting the tank 45° Vacuum System Wiedemann & Reichhardt KW 3000 Approx. 3,000 cbm/h, approx. 20 m suction hose DN 150 Suction pipe DN125 with channel nozzle High Pressure System URACA P3-45 G 70 approx. 475 l/min at 150 bar Approx. 200 m high-pressure hose DN32 Hydraulic high-pressure hose reel with approx. 60 m DN13 Special Features Suction and HP boom 5 liter hand-washing station Stainless steel toolbox Analog control cabinet Radio remote control Tool compartment - left Hose storage Pump compartment sound insulation (extended) Work lights Central lubrication system Waste bin Various brackets Cold water hand-washing device Cable winch Rotating beacon front and rear Technical Data Unladen weight 17,850 kg Gross vehicle weight 26,000 kg Rodpfxewtwwmo Abbjt Length 10,700 mm Height 3,950 mm Width 2,550 mm For further detailed information and/or pictures, please contact us directly. A large selection of further vehicles for SALE or RENT is available at: Specifications, prior sale and errors excepted. The buyer is obliged to independently verify the condition and equipment of the item. Sale exclusively according to our terms and conditions and without any warranty.

Condition: used, mileage: 156,700 km, power: 265 kW (360.30 HP), first registration: 12/2005, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2023, color: orange, gearing type: semi-automatic, emission class: euro3, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2005, Equipment: ABS, air conditioning, ++ FOR RENT ++ FOR SALE ++ FOR RENT ++ FOR SALE ++ FOR RENT ++ FOR SALE ++ Mercedes Actros 2536 L 6x2 Wiedemann enviro tec, Super 2000 6.0/5.0, Water Recovery Unit Body * Wiedemann enviro tec * Super 2000 6.0/5.0, with water recycling * 11,000 litre tank capacity * 1,000 litre fresh water tank * 5,000 litre flushing water tank * 6,000 litre sludge volume * Emptying via 45° tiltable tank Rjdpsxa T Rtefx Abbst Vacuum System * Wiedemann & Reichhardt KW 2000 * Approx. 2,000 m³/h * Approx. 25m suction hose DN 125 * Suction pipe DN125 with sewer folding cover High-Pressure System * URACA KD 716 G65 approx. 340 l/min at 175 bar * Approx. 180m HD hose DN25 * Hydraulic high-pressure hose reel with approx. 60m DN 13 Additional Freshwater System * Speck NP 25/50-120 delivering 50 l/min at 120 bar * Spring-loaded hose reel with 15m pressure hose DN10 Special Features * Sludge tank made of material 1.4301 (stainless steel) * Suction and high-pressure booms * 5 litre hand washing unit with hot water * Stainless steel toolbox * Control cabinet without display * Engine start can be activated from the control cabinet * NMV start can be activated from the control cabinet * Radio remote control with display * Equipment cabinet with two flaps – on both sides * Hose storage compartment * Extended sound insulation for the pump compartment * Work lights * Central lubrication system Technical Data * Unladen weight: 16,920 kg * Gross vehicle weight: 26,000 kg * Length: 11,400 mm * Height: 3,600 mm * Width: 2,550 mm Special Equipment: Engine tunnel storage, front axle load 9.0 t, audio system: Radio Truckline CD 65 / 70 incl. CD player, exhaust raised behind cab, battery 220 Ah, hands-free telephone system, rear axle H 7, 13 t, crown wheel 300, comfort central locking, fuel tank: 400 litres aluminium, reinforced cooling, additional air compressor, PTO independent of gearbox, MB 2C PTO, programmable special module, rotating beacon left/right, reverse warning signal (external), electric sliding/tilting glass sunroof, cab seats: co-driver comfort air-sprung seat, cab seats: driver comfort air-sprung seat, sun visor, voltage converter 24V / 12V 15A, 12V socket, Telligent steered trailing axle, front underrun protection, gearbox oil cooler Other Equipment: Euro 3 emissions standard, axle configuration: 6x2, 2-line trailer brake, electrically adjustable and heated exterior mirrors, outside temperature display, rear axle differential lock, cab: suspension for rough terrain (6.0 HZ), cab: M (medium length), suspension: leaf/air, generator 80A, 16-speed gearbox, cabin filter: pollen filter, chassis/body: chassis, engine 12.0 litre – 265 kW V6 diesel (OM 501 LA), engine brake with constant throttle, single tyres on trailing axle, disc brakes, Telligent brake system with ABS+ASR, CB radio pre-installation, pre-installation telephone/fax, dropped front axle, immobiliser, heat insulating glazing, central locking with key For further detailed information and/or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and specifications of the equipment. Sale is exclusively subject to our terms and conditions and with exclusion of any warranty.

Condition: excellent (used), DOPPSTADT MECHANICAL ROLLER SHREDDER mod: DW 3060 E1 COMPLETE WITH ENGINE, HYDRAULIC CONTROL BOX, EXTRACTION BELT AND ELECTRICAL PANELS Year: 2005 Dimensions: Total length: mm 7900 Overall width without catwalk: mm 2950 Total height: mm 5600 Loading width: mm 1900 Loading length: mm 3060 Total weight: kg 30,000 approx. Rodpoun Sx Sjfx Abbst With motor: kw 315 Rotation speed: 2000 rpm With hydraulic power unit: kw 7.5 Cutting roller dimensions: Length: mm 3000 Rotor diameter: mm 600 Speed: 31 rpm Rotor: 1 Number of rotor teeth: 21 Teeth width: mm 60 Teeth height: mm 150 Rotor protection wear band material: Hardox 400 Comb: 1 Number of comb teeth: 22 Comb teeth width: mm 60 Useful extraction belt width: mm 1000 Installed power: kw 5.5

Condition: used, mileage: 138,655 km, power: 100 kW (135.96 HP), first registration: 10/2005, fuel type: diesel, overall weight: 5,990 kg, next inspection (TÜV): 05/2028, color: orange, gearing type: mechanical, emission class: euro4, Year of construction: 2005, Equipment: air conditioning, Internal vehicle number: G300104 German vehicle On our premises in Kaufungen - Kassel, available immediately More INFO at: Redpfx Abjv Rt T Tsbet * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English)   VIDEO:     TV Inspection System RCA RAUSCH ELKA 600 Year of manufacture 2005 See entire equipment in pictures and video   Financing example: * Internal number:      G300104 * Purchase price:      29,900.00 € * Down payment:      10% * Term:      60 * Monthly installment:      468.31 € Residual value:      5,980.00 € If you are interested in the offer or want to adjust this to your needs, contact us (Mr. Enchev). We look forward to your call     Errors excepted   We are happy to take your used vehicle in trade. Financing directly at our premises possible. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section Rodpfx Aouak Nlsbbst - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Condition: new, Container filling system / conveyor belt system Rotating tower with horizontally rotatable and longitudinally movable conveyor belt on stable galvanized frame, rotatably mounted. Incl. conveyor belt and high belt for automatic filling of three large capacity containers. SPS control distribution belt gear motor 2,2kW / conveyor width 900mm axis distance 5500mm drive slewing ring 0,6kW Rotation drive +/- 90 Conveyor belt conveyor width 600mm / centre distance 4000mm / drive 1,1kW Rsdpfxob Sp D Rs Abbjt High belt conveyor conveyor width 600mm / centre distance 4700mm / drive 1,1kW Colouring according to customer requirements Ordered goods Price and further information on request

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Rsdpfjqi Eh Hsx Abbst Drum diameter x width: 1,400 x 1,200 mm Vibrating feeder Blower with V = 7,000 m³/h incl. steel construction, platform, railings, etc.