Low loader semitrailer

Fliegl SDS 390, 3x VORHANDEN!

Condition: used, empty load weight: 6,990 kg, maximum load weight: 28,010 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 12/2026, loading space length: 10,000 mm, loading space width: 2,500 mm, loading space height: 1 mm, suspension: air, tire size: 235/75R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: inbound / in transit, 3 axles, air suspension, last axle with self-steering, ABS (anti-lock braking system), lashing rings, side protection, support legs, storage box Body: 3 units available! Total length approx.: 13,800 mm Total width max.: 2,550 mm Total height approx.: 2,488 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loading height in low bed when loaded approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 1,150 mm Dusdpfx Abex Hkccsrol King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Fine-grain steel welded construction in reinforced design, saddle plate with replaceable 2" king pin, external frame slightly sloped with "Load-Lock profile" for lashing strap attachment, 8 additional pairs of lashing rings recessed into the outer frame (each rated 5 tons), 1 removable balance block on low-loader deck (3 pieces), upper cross timber support at least 200 mm wide for height equalization, gooseneck can be inserted in 3 positions with parking position at offset, 4 pairs of stake pockets 83 x 83 mm recessed in the floor for inserting balance block, open storage compartment for plug-in stakes below the loading area, 13 pairs of stake pockets recessed into the outer frame (70 x 40 mm internal dimensions, 3 pairs on gooseneck, 10 pairs on low bed), 3 rows of stake pockets recessed in the floor, each with 7 stake pockets (70 x 40 mm internal dimensions), 26 plug-in stakes, width=80 mm / depth=50 mm / length=1,200 mm, hot-dip galvanized, hardwood flooring approx. 30 mm thick laid lengthwise with omega profiles for high point load capacity in the wheel arch area, steel/chequer plate floor. All information provided is without guarantee, as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, color: white, overall weight: 16,000 kg, maximum load weight: 12,720 kg, empty load weight: 3,280 kg, loading space volume: 50 m³, loading space width: 2,480 mm, loading space length: 7,250 mm, loading space height: 2,750 mm, container length: 24 ft, -Year of construction: 2009-2011 -Manufacturer: Krone and Kerex -Fixed roof -Telescopic support legs -Aluminum roller shutter -Double floor -GVWR: 16,000 kg -Unladen weight: 3,280 kg -Payload: 12,720 kg -Interior dimensions: L=7,250 mm, W=2,480 mm, H=2,750 mm -Floor made of plywood -Interiors made of keyhole panels Several swap bodies always in stock, both Jumbo and Standard Delivery available for an additional charge Financing available upon request Images are sample images Opening hours: Mon.-Fri. 8 a.m. to 2 p.m. or by appointment Dedpfx Abjqk R I Neroul Price is NET If purchasing multiple swap bodies, the price is negotiable. A VAT invoice will be issued upon sale. Location: Im Gewerbepark 11 99441 Umpferstedt

Condition: used, empty load weight: 6,990 kg, maximum load weight: 28,010 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 12/2026, loading space length: 10,000 mm, loading space width: 2,500 mm, loading space height: 1 mm, suspension: air, tire size: 235/75R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: in transit, 3 axles, air suspension, last axle with trailing steering, ABS (anti-lock braking system), lashing eyes, underrun protection, supports, storage box Body structure: 3x available! Overall length approx.: 13,800 mm Duodpjx Hkcisfx Abrol Overall max. width: 2,550 mm Overall height approx.: 2,488 mm Gooseneck length approx.: 4,050 mm Lower deck length approx.: 9,600 mm Loaded loading height in the lower deck approx.: 900 mm Internal width approx.: 2,480 mm Saddle height approx.: 1,150 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Fine-grain steel welded construction in reinforced design, fifth wheel plate with interchangeable 2" kingpin, outer frame slightly inclined with "Load-Lock profile" for the attachment of lashing straps, 8 pairs of additional lashing eyes recessed in the outer frame, each rated for 5 t, 1x removable equalizing block on the lowbed area (3-piece), wooden crossbeams on top at least 200 mm wide for height compensation, gooseneck can be inserted into 3 positions with parking position at the drop section, 4 pairs of stake pockets 83 x 83 mm recessed in the floor for inserting the equalizing block, open storage compartment for plug-in stakes below the loading area, 13 pairs of stake pockets integrated in the outer frame (internal measurement 70 x 40 mm - 3 pairs on the gooseneck, 10 pairs in the lowbed area), 3 rows of stake pockets recessed in the floor, each with 7 stake pockets, internal measurement 70 x 40 mm, 26 plug-in stakes hot-dip galvanized, B=80/T=50/L=1,200 mm, hardwood floor approx. 30 mm thick, longitudinally installed with Omega profiles for high point load capacity in the wheel arch area, steel/chequer plate floor. All specifications subject to change as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE, changes, prior sale, and errors excepted!

Condition: used, empty load weight: 6,990 kg, maximum load weight: 28,010 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 12/2026, loading space length: 10,000 mm, loading space width: 2,500 mm, loading space height: 1 mm, suspension: air, tire size: 235/75R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: incoming / in transit, 3 axles, air suspension, last axle steering, ABS (anti-lock braking system), lashing rings, side underrun protection, landing legs, storage box Body: 3 units available! Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Overall height approx.: 2,488 mm Gooseneck length approx.: 4,050 mm Low-bed length approx.: 9,600 mm Loaded loading height in low-bed approx.: 900 mm Internal width approx.: 2,480 mm Duedpfjxz Hk Asx Abrel Fifth wheel height approx.: 1,150 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm High-tensile fine-grain steel welded construction in reinforced design, fifth wheel plate with replaceable 2" king pin, outer frame slightly inclined with "Load-Lock profile" for attaching lashing straps, 8 additional pairs of lashing rings embedded in outer frame, each rated at 5 tons, 1 removable leveling block (3-piece) on low loader deck, wooden cross supports on top, at least 200 mm wide, for gooseneck height compensation insertable in 3 positions with parking position at the bend, 4 pairs of stake pockets 83 x 83 mm embedded in the floor for inserting the leveling block, open compartment for stakes below the loading platform, 13 pairs of stake pockets embedded in outer frame, internal dimension 70 x 40 mm (3 pairs on gooseneck and 10 pairs on low-bed area), 3 rows of stake pockets embedded in the floor, each with 7 stake pockets, 70 x 40 mm internal dimension, 26 galvanized removable stakes B=80/ D=50/ L=1,200 mm, hardwood flooring approx. 30 mm thick laid lengthwise with omega profiles for high point load capacity in the wheel arch area, steel/chequer plate floor. All information without guarantee, as the vehicle is inbound! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, maximum load weight: 29,100 kg, overall weight: 42,000 kg, axle configuration: 2 axles, loading space length: 6,700 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2025, Equipment: ABS, English text below * DOLL panther chassis + 5-year guarantee * DOLL tronic operating and control system including radio remote control * Hydraulically retractable gooseneck * External main frame * Hydraulic steering * Extensive load securing package * Low bed length: 12,362mm (6,700mm + 5,662mm) * Total length: 13,110mm (+5,662mm) * Dead weight: 12,900kg (+/- 2%) * Optional extensive accessories This trailer is also available with a low bed length of 6,100mm and a short delivery time. Images may differ from the original. Information without guarantee. Contact: Tel.: * DOLL panther running gear + 5-Year warranty * DOLL tronic operating and control system incl. radio remote control * Hydraulically detachable gooseneck * Lateral main frame *Hydraulic steering * Comprehensive load-securing package * Low bed length: 12,362 mm (6,700 + 5,662 mm) * Total length: 13,110 mm (+5,662 mm) * Tare weight: 12,900 kg (+/- 2%) * Optional comprehensive equipment This trailer is also available with a low bed length of 6,100mm and a short delivery time. Pictures might be different from the original. Duodpfxsgvhrre Abrol Information provided without guarantee. Contact: Phone:

Condition: used, empty load weight: 10,600 kg, maximum load weight: 22,500 kg, overall weight: 33,100 kg, axle configuration: 3 axles, first registration: 12/1984, loading space length: 11,900 mm, loading space width: 2,730 mm, loading space height: 950 mm, suspension: steel, tire size: 7.50R15, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3-axle, SAF axles, leaf suspension, lashing eyes, 2-section ramps, mechan. Ramps, aluminum side bumpers, supports, twin tyres Body: 3-axle low-loader semi-trailer with 2-section mechanical ramps Loading length plateau bottom approx. 8900mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dusdji Rp A Nopfx Abrol - .

Condition: used, empty load weight: 10,300 kg, maximum load weight: 25,700 kg, overall weight: 36,000 kg, axle configuration: 2 axles, first registration: 01/1999, total length: 21,850 mm, suspension: other, color: red, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, - Faymonville STBZ-2AA. - Double extendable up to 21.85 m - Year of manufacture: 1999 - Axles: 2 x SAF axles, each with 10 tonnes axle load - Own weight (unladen weight): 10,300 kg - Permissible payload: approx. 25,700 kg - Permissible total weight: 36,000 kg - Technically permissible total weight: 38,000 kg - Tyres: Tyre size: 245/70 R17.5, load index: 141J - Trailer in operation, location and inspection by arrangement - Subject to errors and prior sale! ... VAT can be stated separately Dusdpfxjw H S D Ts Abrsl

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Duodpfx Abov Sw E Aorsl Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Duodpfx Aexf Silebrjl Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: new, overall weight: 42,000 kg, axle configuration: 2 axles, Equipment: ABS, Internal reference number for inquiries: PAVIC 2-axle forestry machine low loader Type: STLT2Z for harvester transport ---- In pre-order! Color freely selectable!!!! ----Fifth wheel load: 18,000 kg Axle load: 24,000 kg (technical) Gross weight: 42,000 kg (technical) Unladen weight: 9,300 kg Made in Germany!!!! Chassis as a welded steel construction made from high-quality fine-grain steels Lashing rings 130 kN, 5 per side Additional lashing rings, 3 pairs on the raised platform Removable stanchion system made from galvanized steel with aluminum drop sides (silver anodized) Steel front wall approx. 400 mm high Foldable aluminum loading ramps with mechanical safety interlock Central lubrication system SKF with reservoir (brake light controlled), approx. 20 lubrication points Dimensions: Total length: 16,000 mm Dujdpjxvz Skjfx Abrel Bed length including rear section: 11,364 mm Coupling height: 1,330 mm Ground clearance at driving level: 184 mm Fifth wheel lead distance: 600 mm R1 dimension (from king pin to front): 410 mm (swing clearance radius) R2 dimension (from king pin to frame): 2,150 mm (swing clearance radius) Further dimensions available upon request (technical drawing) Axles: 2 x 12,000 kg (technical) Gigant axles with drum brakes, equipped with 8 x 245/70 R17.5" branded tires on Alcoa Dura Bright wheels Suspension: Pneumatic suspension with lift and lower function Second driving height + approx. 50 mm can be activated from the cab. At 20 km/h driving speed, the vehicle automatically lowers again. Incl. axle load manometer Coupling device: 2" kingpin (interchangeable, single position) WITHOUT support legs! -> Customers use a large timber beam placed under the front frame here. Brake system: Wabco EBS with axle load measuring system (smartboard) incl. odometer Parking brake: spring-loaded Lighting system: Taillights: 2 pairs (3-chamber lights) Side marker lights: LED Outline marker lights: LED Front and rear position lights: LED Reversing and auxiliary lights, each as round lights License plate light: LED 1 removable beacon, switchable from the cab via dedicated switch 4 LED work lights 4 oversize warning markers, double secured (wing nut and pin), with red/white LED illumination Steering: Tridec HF-E (hydraulic displacement steering on both axles) including automatic alignment and straight-line positioning. Tridec remote control (wireless remote control), also usable in wired mode Paintwork: Complete steel structure, shot-blasted after welding and primed with special adhesion primer. Final two-component paint finish in RAL color of your choice. Axles and wheel hubs in black, or painted in RAL color for an additional charge Other attachment parts are galvanized and/or painted/powder-coated, or made from aluminum (with or without anodizing) Approval: Including §13 inspection certificate Including §70 exemption certificate (Customer must provide a suitable and approved 3-axle tractor unit), includes, among other things, a swept path test at TÜV Nord in Meppen. Financing, as well as leasing or hire purchase, is possible. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes.