Lowbed

Fliegl DTS 300

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Kljdezdzzhepfx Agpju

Condition: new, empty load weight: 5,740 kg, maximum load weight: 24,260 kg, overall weight: 30,000 kg, axle configuration: 3 axles, color: silver, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, rotating beacon, 3 axles, SAF axles, turntable, leaf spring suspension, ABS (anti-lock braking system), can be widened to 3m, lashing points, two-part loading ramps, mechanical ramps, extendable drawbar, side aluminum fender, twin tires, EBS. Superstructure: Loading length approx. 8.5m, can be widened to 3.05m. Demo vehicle! Kledpexbttqefx Agpju Parabolic suspension with axle equalization at the rear, 3x 10t SAF axles, permissible gross vehicle weight 30t possible, drawbar adjustable in length. New vehicle from stock, registered on July 21, 2020. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33001012559, empty load weight: 6,250 kg, maximum load weight: 17,750 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,620 mm, loading space width: 2,520 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 860 mm, suspension: air, tire size: 235 / 75 R 17,5", tire condition: 100 %, color: black, Low-bed trailer chassis: Steel welded construction, turntable with robust ball bearing, foldable rear support, 2 chocks with holder, aluminum side impact protection, splash guards at the rear covering the entire width (not in conjunction with forklift mount), half-shell wheel arches, 1st axle with anti-spray splash guard, anti-spray splash guards behind the 2nd and 3rd axles, 1 plastic toolbox with insert, w=620/h=360/d=440 mm, lockable with a padlock, extendable widening sections to 3,000 mm, storage compartment for wooden planks in the center of the loading area, 70 mm wooden planks for widening to 3,000 mm, lashing points for low-bed trailers, 1 pair of lashing recesses in the front longitudinal beam, recessed in the flange, 10 tons each, 4 pairs of lashing holes in the outer frame, 5 tons each (for strap attachment), 7 pairs of lashing eyes recessed in the top and side of the outer frame, 10 tons each, 1 at the front in the flange, 6 in the low bed, the first lashing point 250 mm from the front and the last max. 250 mm from the rear, distance between lashing points not greater than 1100 mm, 5 pairs of ring lashing points recessed in the outer frame, 5 tons each (convertible to pocket lashing points), 2 pairs of folding lashing points additionally, 10 tons each, 1 on the flange (protruding), 1 behind the last axle recessed in the floor, 1 pair of screw lashing points, 6.7 tons each (JDT), with large flange plate including thread as counter-holder, at the front on the flange. Trailer turntable hitch: Drawbar with tested 40 mm drawbar eye, parking sockets for electrical/ABS and air connections on the drawbar. Axles + Suspension: SAF drum brake axles, "axle/chassis laser-measured" to reduce tire wear and fuel consumption, air suspension with lift and lower valve, operable separately at the front and rear. Klsdpfx Aszaznzsgpeu Wheels and Tires: 235 / 75 R 17.5", Fulda, rims: 6 x steel rims in twin arrangement, mounted on the inside; 6 x aluminum rims, polished, mounted on the outside. Braking System: 2-line compressed air braking system, spring brake parking brake, Trailer Info Center for displaying vehicle data such as axle load (not an approved scale) and odometer, vehicle stability system, axle load detection via EBS-Canbus signal for display on the dashboard in the cab, truck must be appropriately pre-equipped, 2 non-interchangeable coupling heads at the front, with connection lines to the tractor unit, EBS, electronic braking system with EBS plug at the front, with connection cable. Electrical System: 24 Volt, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED, manufacturer Aspöck EcoLED 2 with dynamic turn signal, premium LED side marker lights, 2 white position lights at the front in LED, 2 white/red marker lights at the rear in LED, 2 x 7-pole non-interchangeable plugs at the front, with connection cable, additional LED work light at the rear, 1 LED rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, LED-illuminated and extendable to 3,000 mm. Floor: Front flange with steel/diamond plate covering, storage box recessed in the ramp to the flange, followed by a 70 mm larch wood floor, steel/diamond plate covering in the wheel arch area, rear slope with 70 mm larch wood floor, low-bed area including rear slope 6,500 mm, loading ramps, steel ramps 2,800 mm long, 750 mm wide, laterally displaceable, additional ramp locking device, foldable at the bottom (to prevent lateral slippage o

Condition: used, axle configuration: 3 axles, total width: 25,500 mm, total height: 35,000 mm, Year of construction: 2018, Equipment: ABS, = Further options and accessories = - Air suspension rear - Air suspension front Kodey Svrgjpfx Agpelu = Remarks = For inquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone). Fliegl DTS 300 low loader trailer BPW axles, drum brakes, spring loaded brakes, mechanical ramps, permissible total weight: 24,000 kg, unladen weight: 6,350 kg, payload: 17,650 kg, loading area dimensions: L 8,490 mm x W 2,510 mm, tire profile: 1st axle 7-12 mm, 2nd axle 7-8 mm, 3rd axle 4-7 mm If required, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. Further information is available on our website. ... Errors, changes, and prior sale excepted!!! = Further information = Unladen weight: 6,350 kg Payload: 17,650 kg Gross vehicle weight: 24,000 kg Please contact Tobias Ebert for further information.

Condition: new, machine/vehicle number: 195f80ad09517628522e33a91, empty load weight: 7,300 kg, maximum load weight: 16,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Additional Information Low-loader chassis Steel welded construction Turntable with robust bearing ring Rear support, foldable 2 outrigger plates with holder Aluminum side impact protection Splash flaps at the rear, covering the entire width Partial fender in front of the 1st axle 1st pair of wheel recesses recessed in the low-bed area after the crank, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles, recessed in the low-bed area, sloped for access, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Extensions extendable to 3,000 mm (not in rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Extensions extendable to 3,000 mm, also in the wheel recesses at the bottom, foldable at the wheel recess extensions (extension not in rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden boards 70 mm for extension to 3000 mm Tie-down points for low-loader 1 pair of tie-down points recessed in the front longitudinal beam, 10 tons each 4 pairs of tie-down points in the outer frame, 5 tons each (for lashing straps) 7 pairs of tie-down anchor points recessed on the top and side in the outer frame, 10 tons each 1 x at the front on the crank 6 x in the low-bed first tie-down point 250 mm from the front and last maximum 250 mm from the rear, distance between tie-down points no greater than 1100 mm Coupling system for low-loader turntable Kodsi Ri Rvspfx Agpslu Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum brake axles Axle/suspension laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing Wheels and tires 235 / 75 R 17.5 as chosen by the manufacturer Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Spring parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, ABS and ALB, with ABS plug at the front, with connecting cable. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Crank at the front with steel/diamond plate covering Storage box recessed in the ramp to the crank, followed by 70 mm soft wood floor, in the wheel arch area steel/diamond plate covering Rear slope with 70 mm soft wood floor Low-loader platform including rear slope 6500 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring-assisted support Operating instructions With 10,000 kg axle load, an exemption permit is required, only indivisible loads are possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving an

Condition: new, machine/vehicle number: 2dff0c136c85096f36822a0bb, empty load weight: 7,150 kg, maximum load weight: 16,850 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis, low-bed trailer Steel welded construction Turntable with robust ball bearing race, storage box integrated into the turntable extension Foldable rear support 2 chock blocks with holder Aluminum side impact protection Splash guard at the rear over the entire width Extendable widening elements to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3,000 mm Tie-down points, low-bed trailer 3 pairs of tie-down points, each rated at 10 tons, integrated in the floor at the front 6 pairs of tie-down eyes embedded in the top and side of the outer frame, each rated at 10 tons 1 at the neck area the rest distributed in between, with a maximum distance of 1200 mm 1 at the rear slope 5 pairs of pocket housings embedded in the outer frame, 70 x 40 mm inside (can be converted to 5-ton ring tie-down points, not included) Coupling device, trailer turntable Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum brake axles Axle/suspension laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake, including 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable, Note: The attached trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole fail-safe connectors at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking lights (beacon can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area, steel floor, followed by 70 mm soft wood floor, in the wheel arch area, steel/diamond plate covering Rear slope with 70 mm soft wood floor Low-bed platform including rear slope 8,200 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable covered with wood, including with spring-assisted support Operating instructions At an axle load of 10,000 kg, a special permit is required; only indivisible loads are possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached while adhering to the permissible axle/support and saddle loads (poor driving and following behavior possible due to incorrect load distribution). Country of registration/plates Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for two-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rust Drawbar, galvanized or black according to the manufacturer's choice Ramps, hot-dip galvanized Klsdpfx Agoi Riy Eepeu Note: Archive images!

Condition: new, machine/vehicle number: ede0610378cbe39cc4883251d, empty load weight: 24,000 kg, maximum load weight: 7,550 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further Information Low-bed trailer chassis Steel welded construction 1 pair of wheel recesses recessed into the steel platform in the wheel arch area, beveled for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. If machines are to be transported where the overall height needs to be checked, please provide the technical data sheet of the machine types with precise details (if the overall height is exceeded -> customer risk, approval required), (depending on the ground clearance under the machines, inserts in the wheel recesses are required on the customer's side). Turntable with robust ball bearing swivel ring, storage box recessed in the turntable extension Rear support, foldable 2 support wedges with holder Aluminum side underrun protection Splash guards at the rear, covering the entire width Extendable widening elements to 3,000 mm (not in the rear bevel) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks, 70 mm for widening to 3000 mm Tie-down eyes, low-bed trailer 110 3 pairs of tie-down points, each with a capacity of 10 tons, integrated into the floor at the front. Incl. 6 pairs of tie-down eyes, each with a capacity of 10 tons, recessed at the top and on the side in the outer frame 1 x in the neck area rest distributed in between, distance no greater than 1200 mm 1 x rear bevel 5 pairs of pocket recesses recessed in the outer frame, inner dimensions 70 x 40 mm, (can be converted to 5-ton ring tie-down eyes, not included in the scope of delivery) Coupling device, trailer turntable Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bearing Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, ABS and ALB, with ABS plug at the front, with connecting cable, Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! Wheels and tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable, 1 LED rotating beacon with bracket, switched on via the parking lights (beacon can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Ksdpsi Ri Ryefx Agpjlu Floor Front area, steel floor, incl. thereafter with 70 mm soft wood floor, in the wheel arch area steel/non-slip steel plate covering Rear bevel with 70 mm soft wood floor Low-bed area including rear bevel 8,200 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring-loaded support Operating instructions An exemption permit is required for a 10,000 kg axle load, only indivisible loads are possible!!! The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor

Condition: new, machine/vehicle number: d461243f559015adca5bb372c, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Low-bed trailer chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Splash flaps at the rear, covering the entire width Half-shell fenders on the 1st axle with anti-spray splash flaps, anti-spray splash flaps behind the 2nd and 3rd axles 1 plastic toolbox with insert, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening sections to 3,000 mm Storage compartment for wooden planks in the center of the loading area Wooden planks, 70 mm for widening to 3,000 mm Lashing points for low-bed trailer (40 lashing possibilities) 1 pair of lashing points in the longitudinal beam at the front, recessed in the cranked section, each 10 tons 4 pairs of lashing holes in the outer frame, each 5 tons (for attaching lashing straps) 7 pairs of lashing eyes recessed at the top and side in the outer frame, each 10 tons 1 x at the front in the cranked section 6 x in the low-bed First lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not greater than 1100 mm 5 pairs of pocket for securing beams recessed in the outer frame, inside 70 x 40 mm (convertible to 5 ton ring lashing points) 2 pairs of folding lashing points in addition, each 10 tons 1 x on the cranked section (protrudes) 1 x behind the last axle, recessed in the floor Coupling device for trailer turntable Drawbar with tested 40 mm towing eye Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Wheels and Tires 235 / 75 R 17.5 at the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line pneumatic braking system Kodpji Ri Dlefx Agpjlu Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Manufacturer: Wabco, Knorr or Haldex Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole non-interchangeable plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (light can be removed) 2 pairs of warning signs double LED illuminated and extendable to 3,000mm Floor Cranked section at the front with steel/diamond plate covering Storage box recessed in the sloping transition to the cranked section thereafter with 70 mm softwood floor, in the wheel arch area steel/diamond plate covering Rear sloping section with 70 mm softwood floor Low-bed surface including rear sloping section 6,500 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable covered with wood Hydraulically operated via tractor unit auxiliary drive with throttle, actuation on the left-hand side (FR) Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Country of Registration / Signs Country of Registration: Germany 24/7 service hotline prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning sign according to ECE - 70 Painting Frame hot-dip galvanized including passivation 15 years warranty against rusting Drawbar galvanized or black, at the manufacturer's choice Ramps hot-dip galvanized Attention! These are archive images!

Condition: new, machine/vehicle number: 628cde0fe99cc2d3c8eaa8dd8, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Additional information Low-loader chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Splash guards at the rear, covering the entire width Partial fender, 1st axle with anti-splash guard, anti-splash guard behind the 2nd and 3rd axle 1 plastic toolbox with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Extendable widening sections to 3,000 mm Storage compartment for timber planks in the center of the loading area Timber planks, 70 mm for widening to 3000 mm Tie-down points for low-loader (40 tie-down points) 1 pair of tie-down recesses in the longitudinal beam at the front, recessed in the outrigger, each 10 tons. 4 pairs of tie-down holes in the outer frame, each 5 tons (for attaching lashing straps) 7 pairs of tie-down eyes recessed on top and on the side of the outer frame, each 10 tons 1 x at the front on the outrigger 6 x in the low bed First tie-down point 250 mm from the front and last max. 250 mm from the rear, distance between tie-down points not greater than 1100 mm 5 pairs of pocket recesses in the outer frame, inside 70 x 40 mm (can be converted to 5-ton ring tie-down points, not included) 2 pairs of folding tie-down points additionally, each 10 tons 1 x on the outrigger (protrudes) 1 x behind the last axle, recessed in the floor Coupling device, low-loader turntable Drawbar with tested 40 mm drawbar eye Axles + Suspension Drum brake axles, as per manufacturer's choice Laser-measured axle/suspension to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Wheels and tires Kodpfx Aoi Ri Ddsgpslu 235 / 75 R 17.5 As per manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line pneumatic braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS connector at the front, with connection cable Manufacturer: Wabco or Knorr Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Outrigger at the front with steel/diamond plate covering Storage box recessed in the transition slope to the outrigger Then with 70 mm soft wood floor, in the wheel arch area steel/diamond plate covering Rear slope with 70 mm soft wood floor Low-loader platform including rear slope 6,500 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, can be shifted sideways Covered with wood With spring-loaded support Country of registration/signs Country of registration: Germany 24/7 service hotline Prepared for license plate holder, two lines Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning sign according to ECE - 70 Paint finish Frame hot-dip galvanized including passivation 15 years warranty against rust-through Drawbar galvanized or black, as per manufacturer's choice Ramps hot-dip galvanized Attention! These are archive images!