Shock absorber gas spring

Fibro 2480.12.03000.025

Condition: used, Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Shaft: Ø 39 mm -Shaft length: 470 mm Gwlq7Ixmy -Recording hole: Ø 17 mm -Number: 4 pieces of shock absorbers available -Price: per piece -Dimensions: 1755/140/H100 mm -Weight: 24 kg/piece

Condition: used, Shock absorbers, gas springs, shock absorbers -Shaft: Ø 35 mm -Shaft length: 28 mm -Bore: M8 -Number: 8 pieces available Git8Dgz -Price: per piece -Dimensions: 75/160 mm -Weight: 3.8 kg/piece

Condition: used, Year of construction: 2008, Technical details: table diameter: 1000 mm table height: 75 mm max. table load: 250 kg weight of the machine approx.: 1128 kg dimensions: Aggregat: L: 1400 x B: 1000 x H: 160 mm 1-axis NC rotary table - horizontal Positioning and rotary machining mode; intermittent operation with 8 star-shaped T-slots according to DIN 650: a=18H7; h=31mm; b=31mm; c=13mm x length 380mm Finished surface Overall height 250mm Turning: Rotation 360°, by means of incremental encoder, speed 2160°/min. Angular acceleration 120°/sec.²; positioning time 0.867 sec., speed max. 6 rpm, machining 1 rpm. Load on indexing plate axial max. 100kN, radial max. 115kN; Torques tangential 14,000 Nm as well as worm gear 7,000 Nm and circular machining 2,700 Nm Measuring system Heidenhain - RON 886 C type connections (2x G 1/4" and 2x G 1/8") Bsirxjgj9G8 *

Condition: used, Fibro Fibrotor 0008128565-010-01 ( ER.10.0100.1.172.06.0.0.1 )   Condition DE: used Dq8Fjv EN: used

Condition: used, rotary table diameter: 2,200 mm, table diameter: 2,200 mm, Available immediately, subject to prior sale. Bizcal0Iba

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, NC rotary table Fibro 10.36.8 with face gear, year 2001 well maintained, very good condition, little used Pitch 120 teeth +/- 1" With hydraulic locking via face gearing, table top does not lift off Rotary table height 380 mm with substructure height 245 mm Dnma8B Table size Ø 1180 mm Top table plate Ø 1300 mm, Table load approx. 5000 kg Table surface smooth, with dirt grooves with Siemens servo drive 1FT6105-8WF71-4EG2 and bevel gearbox Table speed max. 20 rpm with bevel gearboxes itot = 72 Tangential torque with motor operation 7200 Nm

Condition: used, table diameter 500 mm table load ? t Gxc0Cni table height ? mm weight of the machine ca. ? t dimensions of the machine ca. ? m

Condition: ready for operation (used), Table top Ø2,500 mm with M 56 transport threads. 14 T-slots 22 H12 DIN 650. spacing 160 mm, symmetrically arranged 1 flat groove 22 H7x10 deep lengthwise through centre Ø100 H7x20 deep 1 flat keyway 22 H7x10 deep crosswise through centre Ø100 H7x20 deep Version with INA YRT axial/radial bearing Permissible transport load 20,000 kg (horizontal position) Speed 4/min (maximum 6.25 = 3.00/480) Axial run-out accuracy of table top 0.020 mm (Ø1.000) Concentricity of the centre centring 0.015 mm Partial accuracy ±3 angular seconds through direct path measurement in the table axis Incremental rotary encoder HEIDENHAIN ROD 880 C (reference distance-coded) Measuring system with coupling is included in the scope of delivery! Hydraulic power unit for table clamping (63 bar) with control and top pressure valve mounted on the rotary table base body with unhindered access to the fixators! Two pressure switches for monitoring the table clamping (clamped/released) Permissible tilting moment 13,000 Nm (clamped) Permissible tangential torque 4,000 Nm (clamped) S9V0J SIEMENS feed motor 1FT6105-8AF71-4AL1 with 31 Nm, 3,000/min (Mo/100=50 Nm) Version with brake, smooth shaft (SHW 0287.0222) Length 416 mm from flange Existing output torque with 1FT6105 is max. 6,000 Nm (50x480x0.25) SIEMENS feed motor is included in delivery! Cables for motor are routed directly to the control unit. All electrical cables are wired to a central terminal box with cover for attachments to protect against coolant and chips!

Condition: used, Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing attachment, dividing head, rotary indexing table rotary coupling -Manufacturer: Fibro, Fibroplan rotary table with drive -Type: NC1.03.0340.1.1.04.04 -Table diameter: 340 m -Clamping: hydraulic -Drive: Indramat servo motor type 112B-0-LD-4-C/180-A-0/Wi533LX/S011 B8Nvm0Z3Wb -Number: 3x round table available (1 x with base plate) -Price per piece -Dimensions: 660/640/H550 mm (with base) -Weight: 420 kg (with base plate) /pc.

Condition: as good as new (ex-display), Fibro rotary indexing table ER12.0220.1.162.04.0.0.1 incl. Laipple/KEB  MA63L/6-SO   Zcklbqok3 Condition  DE: unused in outer packaging EN: unused in packaging  

Condition: used, length 1250 mm width 1250 mm 1595 mm 10 t 290 mm 2,0 t 1,8 x 1,3 x 0,3 m Cvmrattkxl - The round table comes from an exhibition and is new!

Condition: used, Year of construction: 1982, table diameter 400 mm table load 0,3 t table height - mm total power requirement - kW weight of the machine ca. 0,3 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Rotary indexing table C93Dyi3 Dividing Options: 5/15/30/45/90/180° Working area: Table top 400

Condition: used, 2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame Ch8Kjt0En7 -Manufacturer: Fibro punch die pillar frame -Type: 201.31.056. Din 9822C 100x80 -Stamp: see photos -Dimensions: 340/160/H235 mm -Weight: 23 kg

Condition: ready for operation (used), Fibro EM 13.0280.8.122.08.0.03 Fibrotor round table SN: 1410410/1 + Rehfuss FG691 flat gear SN:482511, used, normal signs of use, 100% functional, scope of delivery as per photos Rjfpr

Condition: ready for operation (used), Fibro EM 13.0280.8.122.08.0.0.3 Fibrotor round table, SN:1656041/1 + Rehfuss FG691 flat gear, SN:519035, used, normal signs of use, 100% functional, scope of delivery as per photos B038Dulu

Condition: used, Hydraulic Rotary Indexing Table with Face Gearing FIBROTAKT Hydraulic Rotary Indexing Table, Rotary Table Type Y 13 630 FN3RA T6 Manufacturer No. 11 136, Year of Manufacture 1981 Table diameter 630 mm Table height = Overall height 250 mm Table opening Ø 50 mm Bc9Vxf9X3T Indexing angle 60° Hydraulic working pressure 30 bar - Fixed indexing step of 6 divisions - Face gearing for maximum indexing accuracy - Hydraulic drive - Table structure with 6 hydraulic clamping devices (internal collets Ø 90/100 mm) Table space required L x W x H 700 x 700 x 250 mm Space required with structure L x W x H 1380 x 1380 x 800 mm Table weight approx. 600 kg Weight with structure 1350 kg good condition

Condition: used, Divider table Eheudmn

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,261 h, General Data Measurements width 6000 Measurements depth 15000 Measurements height 3800 Machine weight 37000 kg Control Unit Model 840D SL Brand SIEMENS Main Drive Bsk87E8T9Dw Spindle speed range 20-4000 Tool taper SK50 Capto C8 Movement X-Axis Movement 8000 Y-Axis Movement 1300 Z-Axis Movement 1800 C-Axis Movement 360° Additional Equipment Fibro carousel turntable D=1600; 250 rpm / Diameter 1600mm / 6 T-slots D'Andrea facing slide / grooves 22 H7 mm Speed range for D'Andrea facing slide: 1-315 rpm Reversible clamp dimensions: H x W x U: 1100 x 900-3000 x 2200 mm Tool holder ISO 50 / Torque 900Nm / Torque at 150 min-1: 2787 Nm Air pressure 0.7 bar Drive power 100% ED 43kW total height 440mm / max. speed 150 min-1 Max. workpiece weight 8 kg 80 magazine positions in M design This 6-axis BIMATEC SORALUCE FL-8000 was manufactured in 2014, featuring a robust SK50 and Capto C8 tooling system. It boasts extensive travels with X-axis at 8000 mm, Y-axis at 1300 mm, and Z-axis at 1800 mm. The machine's main spindle operates across a speed range of 60-4000 rpm, ensuring versatile machining capabilities. With a total weight of 37000 kg, this machining center represents a significant asset for any production floor. Reach out for further details regarding this machining center. Application Types Milling

Condition: like new (used), Zero point clamping system B3B7Fmkc9V For rotary table: Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z This zero-point clamping system was used on a FIBRO rotary sliding table with a clamping surface of 2500 x 2500 mm. For clamping plate: Zero point clamping system Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z Dimensions: 2290 x 1000 x 120 mm

Year of construction: 1995, Condition: excellent (used), Line for production of drywall metal profile (studs) Brand - DREISTERN Type - 1214 Max width of tape - 500 mm Max tickness of galvanized tape - 2,50 mm Ceiling profiles - CD 60x27x27 ; UD 30 ; galvanized L-profile 33 x 27 mm ( 20x30 mm , 30x30 mm, 50x50 mm, 50x30 mm ) Wall profiles - CW75 profile AND UW75 profile Tables for quick tool change are included All tools are adjustable by material thickness (0.5 mm, 0.6 mm ...) Tape/roll decoiler - FIBRO ; type HADM 1500 Buj0Sluesf

Year of construction: 2002, Condition: reconditioned (used), Functionality: fully functional, Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. Wh3Xeqwz8 This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. Technical details Pharma design, in stainless steel: product contacted parts AISI 316/316L gas contacted parts at least AISI 304 non contacted parts stainless steel Gas recirculation, suitable for inert N2 operation non pressure shock resistant (NPSR) TO BE CONFIRMED Scope of supply Pharmaceutical system comprising: feed material container docking station with dosing screw, rotary valve, 160 UPZ mill in tangential discharge design and installed on a mobile platform, with a 7,5kW motor isolated from the mill production area, piping, filter and discharge closing valve, heat exchanger, blower, platform with stairs, etc. TO BE CONFIRMED A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 1986, Condition: defective spare-parts repository (used), Functionality: fully functional, Fully refurbished Hosokawa Alpine UPZ 315 used machine by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. Eazsuhgw9 Technical details Made of stainless steel Unit has stainless steel plate beater and screen fitted Non Pressure Shock Resistant (NPSR), non gas tight Scope of supply Mill with 18,5kW motor and a set of grinding tools of choice A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2021, Condition: as good as new (ex-display), Rental Unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Bnz3Am7Wzf Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemical or mineral products. Materials up to approx. 3 Mohs can be processed on the UPZ. The 100 UPZ is the perfect mill for the laboratory, research and development of new materials or even small scale production. Thanks to the easy mill’s door opening, that doesn´t require disassemble of other system parts nor use of tools, grinding tools exchange or revision is very quick. It is fitted with a security device that prevents the opening of the machine while in operation. Motor power: 1.5 kW Construction material: stainless steel

Year of construction: 2008, Condition: refurbished (used), Functionality: fully functional, Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. Dnikax This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2024, Condition: as good as new (ex-display), Functionality: fully functional, Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nitrogen of different products, to help in their grinding process (plastics for instance) or maintain their properties (food for instance). The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Btszgbkljg Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery