Industrial robot

FANUC M2000 165 /210; M20

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Prjdpfx Apoxtmqtjpsb Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150 Condition: USED Year: 2003 Prsdpfxjhakfae Appob Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker Predpfxet Rmhao Appjb - Delivery to the left and right

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14101358 (Roboter) / E14130752 (Steuerschrank), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Pjdpfx Ajtk N E Topperb Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Condition: used, Year of construction: 2020, workpiece weight (max.): 5 kg, table width: 267 mm, table length: 1,466 mm, table load: 159 kg, tool diameter: 89 mm, Used Machining Center Brand: Haas Model: TM-2P Year: 08/2020 Serial Number: 1170479 Operating hours: Spindle on time: 12,000h Specifications: - Travels (X, Y, Z): 1016mm, 406mm, 406mm - Spindle to table distance (Min. - Max.): 102 - 508mm - Spindle speed: 6000 rpm - Spindle power: 5.6 kW - Taper: BT 40 - Tool changer carousel: 10 positions - Maximum tool diameter: 89mm (adjacent) - Maximum tool weight: 5.4kg - Coolant pump kit Pedexqc H Sepfx Appsrb - HAAS CNC - Table dimensions: 1466x267mm - Maximum table load: 159kg - Maximum feed rates on all three axes: 10.2m/min.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: P40030, Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe. Specification Harrison Alpha 460plus Height of centres 230mm Distance between centres 1000mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Gap width from faceplate (approx) 216mm Pjdpfx Aonxkcqeppjrb Spindle bored to pass 76mm Spindle speeds: Low range 2 to 500rpm High range 20 to 2000rpm Tailstock travel 145mm Tailstock diameter 95mm Tailstock taper No. 6 MT Approximate weight 2760kg Harrison Alpha 460 Plus Gap Bed CNC Lathe with Fanuc Machine equipped with 3 jaw chuck Quick change toolpost and 4 off toolholders Harrison/Fanuc GE operator panel and screen Stationary steady Guarding Lighting Coolant system

Year of construction: 2011, condition: new, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, Electric cable hoist i=28 New in original packaging as a parts carrier or for installation, see pictures GDR3 H12 Pjdjvylhbepfx Apporb Motor ZBR100 B4 B050

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 08/2027, year of last overhaul: 2026, input frequency: 50 Hz, empty load weight: 700 kg, overall weight: 700 kg, type of input current: three-phase, power: 12 kW (16.32 HP), electrical fuse: 32 A, Spiral mixer Diosna Top model: SP 160 D Dough machine with 2 speeds, 2 timers Robust technology! Prjdpevvqqtjfx Appob Flour dust cover Connection 400V, 32A-CEE plug Used machine, refurbished with warranty + service Optional: Maintenance contract Spare parts box Delivery service Training & commissioning Loan machine service Leasing & rental service Many top spiral mixers in stock!

Condition: used, Dematic conveyor system Roller conveyors can be individually planned RA1287 We plan your individual conveyor system from used goods! The Dematic roller conveyors are in good (used) condition. The roller conveyors are available in different versions, e.g. as: Gravity conveyors - Roller conveyors without drive Roller conveyors - roller conveyors and roller curves with drive Accumulation conveyors with RSPN without RSPN (pneumatic space brakes) Available conveyor lengths (FL): 3000 mm, 2000 mm, 1500 mm, 1000 mm Available nominal/outer width (NB): 600 mm, 500 mm, 400 mm Optionally available e.g: Motors with and without frequency inverter from SEW Eurodrive / Movimot Supports Side guides Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: unknown Prjdpek Aa R Iofx Appsb Condition: good (used) Roller width (RB): 540 mm 440 mm 340 mm Roller pitch: 62.5-125 mm variable (for roller curves the smallest pitch is 56 mm) Drive types: Head and center drive Load weight: up to 30 kg Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, CNC milling machine ABENE, Type VHF-360TI Serial No. 36084 Year of manufacture 2008 CNC control HEIDENHAIN TNC 320 Travel ranges X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle mount SK 40 Spindle speed 55 - 3000 rpm, 2 speeds Feed rate 30 - 4000 mm/min, stepless Rapid traverse rate (X + Y-axis) 4000 mm/min. Rapid traverse rate (Z-axis) 2000 mm/min. Distance spindle nose to table 20-495 mm Motor power spindle drive 7.5 kW Power supply 400 Volt, 50 Hz - CNC path control HEIDENHAIN TNC 320 with interfaces RS232, USB and LAN Prodpfxety A Ehe Appsb - Electronic handwheel for X, Y and Z axis - Mechanical handwheels for X and Y axis - Spindle speed can be manually switched with 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with side-mounted, swiveling spindle head +/- 50° - Inclined bed adjustment manually via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric coolant pump located beside the machine - Machine light - Control cabinet firmly attached to the machine - Operating hours read on control system when switched on = 14780 hrs. - Operating hours read on machine when switched on = 12980 hrs. - Operating hours read on program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition