Cleaning machine

EVEREST ESP Serie

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Becls7Knew Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation Kp7Qx

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump Becltqmymy - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Condition: new, Year of construction: 2024, fuel type: diesel, power: 18 kW (24.47 HP), motor manufacturer: 4JC-29DT, General information Field of application: Construction Weights Empty weight: 750 kg Functional Generator capacity: 15 kVA Other information EPA Marked: yes E2Pruzq Fuel consumption: 3,2 100% l/h Frequency: 50 Voltage: 230400 Drill equipment: Steel canopy Emission level: Stage IIIA / Tier III Water tank volume: 45 l Transport dimensions (LxWxH): 1,86x1,34x0,9 Additional information Please contact Javac - Belgie for more information = Dealer information = Al onze vermelde prijzen zijn exclusief 21% BTW.

Year of construction: 2025, Condition: new, Having a compact design, P Series has closed chamber technology. The P Series consists of machine series that produce high quality pellets of dry ice, varying according to their production of different kilograms per hour. Standing out with its power and performance, the P Series is designed in accordance with the food and medical industry, consisting of a moisture-proof stainless steel body. Once production is started, it starts producing pellet dry ice in under 2 minutes. It produces pellets in 3 mm, 10 mm and 16 mm thicknesses. We have pellet mold designs in the desired thickness in line with the demands of our customers. Designed by our expert engineer staff, the P Series is manufactured in European Standards (CE). It produces dry ice suitable for use in the food and health industries. Supporting the remote access system, the series provides high production capacity with its unique technology. The silent, vibration-free hydraulic system provides high operating performance. It has galvanized coated hydraulic cylinders, precise speed settings, safety valves and long-lasting circuit elements. Animated Control Panel Custom Interface Design Animated Machine Motion Tracking Instant Production Tracking CO₂ Injection Setting Hydraulic Oil Temperature and Level Monitoring Total Production Amount (Approx.) Internet connection Remote Access System Language Options and Easy Change Machine Maintenance Notice Data Monitoring with I/Q Module ioT Instant Current and Instant Volt Monitoring for Each Valve Fault Feedback Panel PC Option Computer Application Sending Production Instruction via Computer Starting Production from a Computer AT-50P (Pellet) Size: 1340 x 690 x 1560 mm Weight: 590 kg Production: Pellet Quantity: up to 50 kg/h 7N3Gzn8R3C Pellet: 3mm, 10mm, 16mm Display: 7”(Internal)-- 9”-10” PC: 10.1”-15.6“ Power: 7.5 kW Max Current: 20 A Noise: Below 75 db(A) AT-120P (Pellet) Size: 1340 x 690 x 1560 mm Weight: 590 kg Production: Pellet Quantity: up to 120 kg/h Pellet: 3mm, 10mm, 16mm Display: 7”(Internal)-- 9”-10” PC: 10.1”-15.6“ Power: 7.5 kW Max Current: 20 A Noise: Below 75 db(A) AT-150P (Pellet) Size: 1340 x 690 x 1560 mm Weight: 590 kg Production: Pellet Quantity: up to 150 kg/h Pellet: 3mm, 10mm, 16mm Display: 7”(Internal)-- 9”-10” PC: 10.1”-15.6“ Power: 7.5 kW Max Current: 20 A Noise: Below 75 db(A) AT-200P (Pellet) Size: 1340 x 690 x 1560 mm Weight: 590 kg Production: Pellet Quantity: up to 200 kg/h Pellet: 3mm, 10mm, 16mm Display: 7”(Internal)-- 9”-10” PC: 10.1”-15.6“ Power: 7.5 kW Max Current: 20 A Noise: Below 75 db(A)

Condition: new, Year of construction: 2024, Fiber laser cutting machine without change table Autofocus cutting head Accuracy 0.01 mm. Suitable for various types of plates Fixed and movable lens are both water-cooled, reducing the temperature of the cutting head and extending the life of the cutting head 3rd generation Aluminum beams. These beams are manufactured to aerospace standards and have hardness up to 6061 T6 With vertical HD screen with high responsiveness, high contrast, Standard for seeing Cypcut program Source IPG or Raycus or Max Fully enclosed casing Model LF3015P Power 1000W 2000W 3000W 4000W 6000W Dimensions 5425*3150*2530mm Working area 3000mm x 1500mm Positioning accuracy ±0.02mm Max speed 120m/min Max acceleration 1.5G Mm3Yfl7 Voltage and frequency 380V 50Hz/60HZ

Condition: new, Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 1024 ET - MD - MVR, EVEREST BLOWER pump Type: 1024 ET - MD - MVR Specifications: Power: 147 BHP Capacity: 6516 m3/hour Bm99Azl2 Year: 2016 Condition: new Mechanical heat pump. Mechanical vapor recompression (MVR) technology. Allows reuse of waste heat. Available with SIEMENS motor.

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available Qnjhl - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: new, Discover our selection of robust and precise conventional lathes! Are you in search of a reliable lathe that boosts your productivity? Experience precision and performance with our new conventional lathes equipped with a wide range of accessories. Our machines offer turning diameters from 400-1000mm and turning lengths up to 10m, also available as a cycle variant. With various models, you have limitless possibilities. Some machines are quickly available from stock! Explore our extensive special accessories, such as hollow spindle, infinitely variable speeds, Siemens controls, and more, to make your lathe even more versatile. Whether for complex workpieces or demanding tasks, our machines always deliver the best results. Bdgunhcst0 Trust in our long-standing experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Here's a selection of STOCK MACHINES (see images), and we are happy to offer additional models or special machines upon request: Technical Main Data: DLZ Series including 15% or more BAFA subsidy! - Turning diameter over bed: 400-1000 mm - Turning length: 1000/1500/2000/3000 mm - Spindle bore: 80 (opt. 105) mm - Workpiece weight up to 2t - Spindle speed up to 2800 rpm Accessories: Digital display, 3-jaw chuck, faceplate, Multifix tool holder, and more. Extensive SPECIAL ACCESSORIES such as infinitely variable speed, steady rests, larger spindle bore, and more to make the machine even more productive. Currently available new machines with warranty and BAFA subsidy, for example: - SDM 850: Turning diameter over bed 850mm, turning length 3m - DLZ 325: Turning diameter over bed 650mm, turning length 2m and 3m - DLZ 250: Turning diameter over bed 500mm, turning length 1m and 1.5m - DLZ 200: Turning diameter over bed 400mm, turning length (missing information) More models (also with cycle control) available on request. Contact us now and discover the world of innovative turning technology! Our service for you: - Consultation and solution finding at your location - Organization of machine transport to your facility - Installation, assembly, commissioning, and ready-to-use handover - Financing and exploration of funding opportunities through KFW and BAFA, and more.

Condition: excellent (used), COSTA LEVIGATORS Series S model SN 5-groups first group electronic sectioned transverse belt second group 1 roller third group 1 roller fourth group electronic sectioned pad super finisher fifth group electronic sectioned transverse belt machine width 1350 vacuum inverter on all belt groups inverter on belt Bsjujsy9Bk outfeed brush group blower group on outlet

Condition: new, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Kgldx8Aq Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 66 db(A) Dimensions L/W/H in mm: L 111 / W 508 /H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request NEW: Pre-filter system (optional) Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Year of construction: 2009, Condition: used, For sale are 7 centrifugal pumps from Pumpenfabrik Wangen from 2009, model ESP. Three of the seven centrifugal pumps have a motor. Data on the pump: Number of pieces: 7 / 3 with motor Length: 226cm (with motor) height: 34cm Manufacturer: Pumpenfabrik Wangen Type: ESP No: 920615 Year of construction: 2009 connections: DN100 PN16 Motor data: Jwglpu Motor: SEW Eurodrive Type: RF77DV100L4/TF No.: 01.1280626601.0014.09 r/min: 1400/48 kW: 3/S1 V: 230/400 A: 11 / 6,30

Year of construction: 2022, Condition: new, Electrostatic filters are considered the most sophisticated technology, currently available, for the collection of solid and liquid particles existing in an exaust air flow. The electrostatic uptake allows the separation of any particle from the air, regardless of its size. In fact, the agglomeration of very fine particles is possible with efficiencies up to 99% on atmospheric dust according to the EN 779 method.The use of electrostatic filters therefore allows to obtain air completely free of dust , smoke, spores, bacteria, pollen ecc . The main advantages deriving from the use of electrostatic filters are: • High filtration efficiency • Low pressure drops • Low operating cost • Limited maintenance interventions Gemkozi8 • High operating reliability

Condition: excellent (used), Year of construction: 2022, Fully automatic carton packaging machine, individual creation of the carton size for each shipping item, Sparck, CVP Everest - second-hand - : Price ex location: 1.100.000.-€ (net)! Manufacturer: Sparck Type: CVP Everest Year of construction: 2022 This machine can process up to 1,100 parcels per hour and significantly reduces packaging material and shipping costs. Gxcdpsa 🔹 Automation: Replaces up to 20 manual packing stations 🔹 Efficiency: Reduces carton volumes by up to 50% 🔹 Sustainability: Saves up to 30% on packaging material *Ideal for companies that want to optimize their packaging processes The CVP Everest creates, closes and labels the perfectly fitting carton. This system can cope with your high production demands and changing peak loads. A 3D scanner determines the dimensions of the entire order and generates the custom-fit shipping carton. As large as necessary, as small as possible. By using volume-adapted cardboard packaging, you meet customer expectations for environmentally friendly packaging. Former original price: 1.45 million Condition: very good Available: immediately Location: Ram Cologne Enclosed also a link to a video of a similar plant

Year of construction: 1985, Condition: used, Manipulator, lifting aid, lifting device, workplace crane, indoor jib crane, indoor crane, workplace crane, material gripper, pillar jib crane 2Ojjwyjb -Manufacturer: Thyssen, manipulator pneumatic type ESP -Load capacity: 30 kg -Operating pressure: 6 bar -Outreach: max. 2900 mm -Hook height: min. 500 mm / max. 2000 mm -Swivel range: 360° -Minimum room height: 4400 mm -Transport dimensions: 3410/800/H2000 mm -Own weight: 610 kg

Year of construction: 2009, Condition: used, For sale are 8 centrifugal pumps from Pumpenfabrik Wangen from 2009, model ESP. Five of the eight centrifugal pumps have a motor. Number of pieces: 5 / 3 with motor Length: 172cm (without motor) / 229cm (with motor) Height: 34cm Manufacturer: Pumpenfabrik Wangen Type: ESP No.: 920607 Camwccxc Year of construction: 2009 Connections: DN100 PN16 Motor: SEW Eurodrive Type: RF77DV100L4/TF No.: 01.1280626601.0003.09 r/min: 1400/48 kW: 3/S1 V: 230/400 A: 11 / 6,30

Condition: excellent (used), Year of construction: 2011, clamping force: 3,000 kN, Injection molding machine SANDRETTO Serie nove 300 T Injection unit: E1300 Screw diameter: 63 mm Injectable volume: 863 cm3 Injection pressure: 1523 bars Distance between columns: 665 x 665 mm Opening stroke: 660 Mold thickness: min 230 mm / max 730 mm Plate dimensions: 980 x 980 mm Installed power: 55.5 kW Dimensions: 7055 x 2547 x 2160 Weight: 12900 kg Euromap 12 robot interface Auxiliary cores (PF and PM) 9Bfa3Cg28

Condition: new, Year of construction: 2025, Functionality: fully functional, laser power: 12,000 W, sheet thickness aluminum (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness copper (max.): 20 mm, sheet thickness brass (max.): 20 mm, warranty duration: 60 months, type of input current: three-phase, input voltage: 400 V, sheet thickness (max.): 25 mm, compressed air connection: 7 bar, Equipment: cooling unit, safety light barrier, Fiber laser cutting machine for sheet metal of all types. Equipped with automatic nozzle change and one-click processing functions, the P series is competent for all cutting demands. The fiber laser's special nozzle and cutting process ensure faster oxygen carbon steel cutting, more gas-saving low-pressure nitrogen stainless steel cutting at low pressure, and better quality air carbon steel cutting. Fiber laser heads are able to detect protruding obstacles to effectively reduce the damage rate and save the maintenance cost of laser cutter. With one-click processing, a laser machine is able to process multiple sheets in batches with a single setup, achieving batch processing. Condition: New Laser Type: Fiber laser Laser Power: 12000W Cutting area: 3048*1524mm Cutting speed: 110 m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Supported graphic format: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling mode: WATER COOLING Intake filter: Videos ECO9 CTS 18 Kw Beh2Um3 Available for immediate delivery

Condition: used, Please contact us for more information. 8Tfb8W9Vu

Condition: used, Year of construction: 2006, machine/vehicle number: 2449-01, Used machine Year of manufacture: 2006 Serial number: 2449-01 Rotary disc machine, working width 1350mm, for deburring and finishing flat parts and surface cleaning in all directions. Dry version with a disc unit - RD, equipped with an abrasive fleece disc. The machine is also equipped with two sanding belt units - W - before and after the disk unit for pre-deburring and fine grinding. Workpiece dimensions: Min: 30 x 30 mm (L x W) Max: 1350 x 150 mm (W x H) Sanding belt dimensions: 1380 x 1900 mm Disc diameter: 1380 mm Speed: Sanding belt unit: 8-22 m/sec. Disk unit: 10-22 m/sec. Feed speed, frequency controlled: 2 – 12 m/min. Electricity: Aggregate – W – sanding belt: 18.5 kW Aggregate – RD – Discus: 12.9 kW Aggregate – W – sanding belt: 18.5 kW Feed motor, frequency controlled: 2.6 kW Electrical connections: 400 volts Frequency: 50 Hz Control current: 110 V Dq0Qu2 Available immediately. Viewing and testing possible.

Condition: new, Year of construction: 2025, Functionality: fully functional, laser power: 6,000 W, sheet thickness aluminum (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness copper (max.): 14 mm, sheet thickness brass (max.): 14 mm, warranty duration: 60 months, input voltage: 400 V, sheet thickness (max.): 25 mm, compressed air connection: 7 bar, Equipment: cooling unit, safety light barrier, Fiber laser cutting machine for all kinds of sheets. Equipped with automatic nozzle changing and one-click processing functions, the P series is competent for all cutting demands. The special fiber laser nozzle and cutting process ensure faster oxygen cutting of carbon steel, more gas-saving low-pressure nitrogen cutting of stainless steel, and better quality air cutting of carbon steel. The fiber laser heads are able to detect protruding obstacles to effectively reduce the damage rate and save the maintenance cost of the laser cutter. With one-click processing, one laser machine is capable of processing multiple sheets in batches with a single setting, achieving batch processing. Condition: New Laser type: Fiber laser Laser power: 6000W Cutting area: 3048*1524mm - 6100*2500mm Cutting speed: 200m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Supported graphic format: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT S7Pbmet Cooling mode: WATER COOLING Suction filter: ECO6 CTS 9 Kw Available for immediate delivery

Year of construction: 2013, Condition: used, Please contact us for more information. 72Urv2Tze

Year of construction: 2001, Condition: used, Please contact us for more information. Dq09Cd

Condition: used, Dimensions (LxBxH): 380 x 100 x 200 cm Dq00K2

Year of construction: 2001, Condition: used, Please contact us for more information. 7Atlknig0