Demag hoistmotors & craneparts

Demag

Condition: ready for operation (used), functionality: fully functional, overall weight: 5,000 kg, total length: 7,860 mm, total width: 2,900 mm, load capacity: 5,000 kg, main lifting speed: 5,000 mm/min, TECHNICAL DETAILS Hoist designation: P 35 Lifting speed: 5 m/min FEM group: 1Cm Load capacity: 5 t Rope/chain: 16 mm Y/W dimension 1: 111 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 7,860 x 2,900 x 1,000 mm Dsdpfxjyf Av Ds Af Djcc Net weight: 5,000 kg EQUIPMENT Wireless remote control Test book available Note: Crane runways are not included in the scope of delivery or sale.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: M2019011975, cooling capacity: 430 kW (584.64 HP), Carrier Chiller 30 RBP-430-0095-PE (AquaSnap Series) Type: Air-Cooled Liquid Chiller Model: 30RBP-430-0095-PE Variant: 30RBM/RBP Serial Number: M2019011975 Year of Manufacture & Test: 06/2019 Manufacturer: Carrier SCS, Montluel, France (United Technologies, Carrier Corporation, USA) Technical Specifications: Nominal Cooling Capacity: 430 kW Djdpsxb D Rasfx Af Decc Refrigerant: R-410A Circuit A: 23.50 kg / Circuit B: 26.70 kg Total Charge: 50.2 kg GWP: 2088 Compressors: Danfoss Scroll SH240A4ACE (thermally protected) Power Supply: 400 V / 3 Ph / 50 Hz Maximum Current Draw: 340 A Maximum Starting Current: 210 A Power Input: 210 kW Operating Temperature Range: –20 °C to +52 °C Net Weight: 2760 kg Protection Rating: IP54 Pressure Data Refrigerant: R-410A Allowable Pressure (Min/Max): High side (PS): –1.0 / 44.2 bar (–99.0 / 4420.0 kPa) Low side (PS): –1.0 / 31.1 bar (–99.0 / 3110.0 kPa) Safety Relief Valve Setting: 42 bar Rupture Disc Setting: 45 bar Test Pressure: 15.0 bar (unit leak test) Additional Information: Air-cooled design with axial fans and integrated condensers. Electrical control panel with Carrier management system. Hermetically sealed system, original Carrier service log included. Serviced and maintained by official Carrier service centre.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 122,158 h, clamping force: 3,300 kN, screw diameter: 60 mm, This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Locking force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mold weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Stroke volume: 763 ccm • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Max dosing stroke: 270 mm • Plasticizing flow: 41 g/s • Configuration/controls: • Armored (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (Yes/Yes) • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement performed in 2017 Dcodpfx Afjyg Nkws Dec Additional equipment • Wittmann W322-121 CNC linear robot/removal device (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 96,986 h, clamping force: 600 kN, screw diameter: 30 mm, This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mold installation height: 210 mm • Opening stroke: 400 mm • Max. mold weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on the ejector side/AS) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Stroke volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D: 20 • Nozzle radius: 15 mm • Armored/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 metric tons Dcedeyg Nfuepfx Af Dec Additional equipment • Robot/removal device: W621-1381 • Travel paths: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: 7-zone integrated control • Mold sensors: Kistler (p=1/t=0)

Year of construction: 2000, operating hours: 50 h, condition: like new (used), functionality: fully functional, lifting height: 10,000 mm, main lifting speed: 6,300 mm/min, Double rail trolley 16/4t and also 2x available consisting of: Main hoist 16t with mechanical feeder Type AS6040-25 4/1 L2 Reeving 4/1 Lifting speeds 6.3/0.63m/min Djdpsrbyqkjfx Af Dscc Lifting height 10m FEM 3M 2-fold load hook Fine lift 4t SH5020-25 2/1 Reeving 2/1 Lifting speeds 12.5/2m/min Lifting height 12m FEM 2M Single load hook super condition, hardly used, incl. load collective memory and load totalization, incl. hook block, electrics 400/230V, trolley track 1400mm, trolley travel 20/5m/min

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display Dsdpsyg Eu Sjfx Af Dscc 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Dcsdjva Ht Sepfx Af Dsc Shot weight: 400 g Shot volume: 442 cm3 -2 core pullers -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Type: Horizontal Drive: Hydraulic

Year of construction: 1999, condition: used, CAPACITY 2000kgr HEIGHT 4.7M & 5M ARM LENGTH 3.2M 2 PIECES Dedjwa I A Tepfx Af Dscc

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot Dcodpoyguk Aofx Af Dsc An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7174-0115, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 110/470-200h/120v (1100-200h/120v) Dodpfxsyguhhs Af Decc Clamping Force [kN]: 1,100 Number of components: 2 Clamping plate width [mm]: 670 Clamping plate height [mm]: 670 Clear tie bar spacing, horizontal [mm]: 470 Clear tie bar spacing, vertical [mm]: 470 Centering ring diameter [mm]: 125 Minimum mould height [mm]: 240 Maximum mould height [mm]: 600 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 180 Thread [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 600 Turntable thread [M]: 16 Maximum tool weight [kg]: 1,000 Maximum tool weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 30, EE2: 22 Maximum shot weight [g] PS: EE1: 94, EE2: 42 Aggregate configuration: EE1: horizontal, EE2: vertical Equipment: 2-core pull, with robot Inspection possible at any time by appointment. Free on truck, loaded (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGergo | Ergotec | Multi110/470

Condition: excellent (used), Trane chiller available in very good working condition. Dcodpfxow Syx Aj Af Dsc

Year of construction: 2024, condition: new, Demag NC3 panel new never used width- 30cm height- 5cm length- 50 cm Dodpfx Asqvuinof Dscc Demag Ergotech system 3 panel

Year of construction: 2024, condition: new, Demag Panel NC3 Made in Germany width-30CM height-5CM length-50CM TYPE: 6EJ5 398-0DE14 Dsdpfsqvuigsx Af Docc Demag spare part panel

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 495 kW (673.01 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,550 kg, input voltage: 400 V, total width: 2,450 mm, total length: 5,050 mm, total height: 2,750 mm, input current: 170 A, input frequency: 50 Hz, Equipment: compressor, freezer, Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller Capacity kW 491.9 Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Dsdpfx Ast Tfbqef Djcc Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Dcjdpfeygikwex Af Dsc Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000