Sick cat

DEMAG

Condition: used, Year of construction: 1992, machine/vehicle number: 0554, Anhänge-Kompressor, Mannesmann DEMAG, Baujahr 1992 , abgelesene Betriebsstunden 1219h, Typ SC20DS-2, Gewicht 600kg, Maße mit Deichsel 3160 x 1480 x 1180, Leistung 2,0 m³ je min, 2 Luftanschlüsse, 2 Zyl. Deutz Motor, Kugelkopfkupplung (PKW), Beulen und Rostschäden, siehe Bilder, Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Anhänge-Kompressor, Mannesmann DEMAG, Baujahr 1992 , abgelesene Betriebsstunden 1219h, Typ SC20DS-2, Gewicht 600kg, Maße mit Deichsel 3160 x 1480 x 1180, Leistung 2,0 m³ je min, 2 Luftanschlüsse, 2 Zyl. Deutz Motor, Kugelkopfkupplung (PKW), Beulen und Rostschäden, siehe Bilder, Fpjdpfxszcblxe Ahkjk Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben.

Year of construction: 2011, condition: new, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, Electric cable hoist i=28 New in original packaging as a parts carrier or for installation, see pictures Fedpfevylhbsx Ahkjpk GDR3 H12 Motor ZBR100 B4 B050

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Fodpfex Sqi Hex Ahkepk Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: good (used), Winch rope, crane rope, lifting rope, wire rope, stainless steel rope, forestry winch rope Fpjdpfjzh Ehgsx Ahkek -Crane rope: Demag wire rope Ø 16 mm -Length: 35.0 m -Item no.: P 600 H13 4/1 589 440 44 -Rope type: IWRC U(bk) -other crane ropes also available -Transport dimensions: Ø 420 x 155 mm -Weight: 37.9 kg

Condition: used, 4 pieces telescopic crane carrier / price per crane carrier Part for sale as spare parts Weight per telescopic arm = 0.8 to * Fpjdpfou Nvn Ijx Ahkok

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: Fpedpoyg Eu Sjfx Ahkek 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: good (used), Year of construction: 2005, functionality: fully functional, Robot Demag W710 axis) (Wittmann) Fedpjxp Nu Tsfx Ahkopk Number of axis: 3 X- 600 mm Y- 800 mm Z- 1500 mm

Condition: refurbished (used), PRICE ON REQUEST! - 5 units, used and inspected completely overhauled, all wear parts replaced - completely measured - Gear play: Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.02 WM Fpsdpfx Asg A Iv Eshkjk - Central hand newly adjusted - Endurance test for 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand available for exchange (without exchange available on request) - Gearbox overhaul of axes 1-6 - 12 months warranty 18 months possible for an additional fee MORE THAN 100 central hands immediately available in stock, various models. Just inquire! We also offer an express overhaul of your KUKA central hand – 48-72 hours from delivery. In addition, we also offer the repair of ABB wrists.

Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Fodpfx Aova Ht Sjhkepk Shot volume: 442 cm3 -2 core pullers -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Type: Horizontal Drive: Hydraulic

Year of construction: 2024, condition: new, Demag Panel NC3 Made in Germany width-30CM height-5CM length-50CM TYPE: 6EJ5 398-0DE14 Demag spare part panel Fpjdsqvuigjpfx Ahksk

Year of construction: 1974, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: Si12,5, Demag P625 H13 4/1 wire rope hoist hoist crane indoor crane overhead crane payload 12500Kg -12,5t 380V 16A, hoist 6,5m, 4 strands ( 2 hoist speeds - 0,5 - 5m/min ) Hoist was overhauled by Erich Schäfer Fodoupw Alopfx Ahkepk Corresponds to new condition Fully functional Pick up in 75053 Gondelsheim, forklift is available for loading Shipping by forwarding agent possible, please ask for zip code

Condition: good (used), Year of construction: 2008, clamping force: 500 kN, Demag Systec 50/370-120 (2008) Screw size: 18 mm tie bar distance: 370x370mm Fedjy Eyq Hopfx Ahkspk machine is in good working condition immediately available at our warehouse.

Condition: good (used), Year of construction: 2006, Demag systec 160/520-430 (2010) Fsdpfx Ahoyyzpyskspk

Year of construction: 2024, condition: used, functionality: fully functional, construction height: 1,850 mm, load capacity: 2,000 kg, Hydraulic cable winch Technical condition: New Fpedpfxev N Rzxo Ahkok

Condition: good (used), Year of construction: 2004, Demag ergotech sys 50-200 (1992) Fodpfx Ahoyyztfjkspk