End carriage for bridge cranes

Demag 2000 kg

Condition: excellent (used), For sale: Professional lifting set: DEMAG chain hoist + VETTER travelling beam – complete kit High-quality German-made equipment, designed for industrial use. TECHNICAL DATA: Lifting capacity: 2000 kg (2 tons) Beam length: approx. 242 cm Hoist manufacturer: DEMAG Beam manufacturer: VETTER Fördertechnik Power supply: 400V, 3 phases, 50 Hz Year of manufacture: 1997 Lifting speeds: 2-speed (slow + fast) Control: pendant remote (up/down + STOP) Chain: original, in good condition Trolley: manual (moves along the beam) DEMAG hoists are known for their industrial durability and reliability. SET INCLUDES: ✔ DEMAG chain hoist ✔ VETTER travelling beam (approx. 2.4 m) ✔ Manual trolley ✔ Control pendant (remote) ✔ Wiring ✔ Safety hook Kodpfx Apoz Smw Doiodu TECHNICAL CONDITION: unit in working order normal signs of use ready for operation without additional investment APPLICATIONS: workshops warehouses production halls service stations assembly work

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Technical Specifications: • Tool holder, shaft: 120 mm • Tool: 390 mm • Working speed: 2-7.5 m/min • Motor: 15 kW • Dimensions (L-W-H): 2000 x 1700 x 1950 mm • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox • Hardened standard rolls • Hardened and ground tool holder, shaft Kjdexrd Rnjpfx Apijdu • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports • Digital displays (2 pcs.) • In accordance with CE standard

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2349, Demag hall crane, portal crane, single-girder crane, including steel structure with floor control. Dimensions of the steel structure approx. 7.5 x 4 m with 1x Demag bridge crane, 2 tons. Payload/lifting capacity: 2000 kg - 2 tons. Technical data of the system: Crane track/steel structure consisting of HEB160 and IPE300 beams. Length of steel structure approx. 6 m Length of running rails approx. 7.5 m Kdedpfx Apjz Tdb Uoiou Total width of steel structure approx. 4 m Total height of crane approx. 4.64 m Top of running rails approx. 4.4 m Bottom of running rails approx. 4.15 m Hook height approx. 3.2 m Base plates at the supports approx. 40 x 40 cm. System is delivered complete: Steel structure/supports made of HEB160 (embedded approx. 10 cm), running rails IPE300 incl. power rail/power supply. 1x single-girder crane with 2000 kg Demag PK10 chain hoist with floor control. Crane is disassembled and immediately available. The location of the item is 75053 Gondelsheim. Very good condition, see pictures. Shipping by freight forwarder or collection by appointment only.

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Friction wheel Demag type: RF180 -Carrier width: 120 mm -Load capacity: 2000 kg Kdedsdc Ipmopfx Apiju -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Condition: good (used), functionality: fully functional, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, shaft diameter: 100 mm, roller diameter: 300 mm, bending radius (max.): 500 mm, bending radius (min.): 500 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 5 rpm, pipe diameter (max.): 115 mm, tube wall thickness (max.): 3 mm, overall weight: 2,700 kg, total length: 150 mm, total width: 150 mm, total height: 150 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, operating pressure: 200 bar, year of last overhaul: 2026, Equipment: documentation/manual, emergency stop, hardened rollers, Profile bending machine model PP100 Kdjdpfx Apeywhameieu Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

Condition: used, Crane hook, lifting clevis, bottom clevis for chain hoist Hook clevis, load hook DEMAG, 2-strand Suitable for PK10 Load capacity: 2000 kg Demag No.: 56236044, replaced by Demag No.: 64755304 For two load strands Chain nominal dimensions: 10.0 x 28.0 mm Chain pitch for 1 chain link: 28 mm Chain pitch for 11 chain links: 208 mm Wire thickness = nominal thickness: 10 mm Outer dimension, transverse: approx. 34 mm Inner dimension, longitudinal: approx. 28 mm Outer dimension, longitudinal: approx. 48 mm Kodpfx Apjy Tptmsiodu Self-weight: 6.6 kg Very good condition, from stock

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Kedpfxjx Di Rqs Apijdu Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, machine/vehicle number: 11.031.802, Plasma Cutting & Grooving with Hand Torch, from 3 to 45 mm Simple and cost-effective technology for any cutting application The PA-S45 W plasma cutting system is suitable for manual and mechanized cutting in the material thickness range of 3 to 45 mm. By using different plasma gases and gas mixtures, electrically conductive materials can be cut and grooved cleanly. As a mobile system, it can be used in workshops, training centers, and on construction sites. Kdjdpfxsy U Uqte Apiju Advantages: Optional use of hand or machine torch Suitable for 2D & 3D guidance systems Robust and simple design Mobile systems for flexible use Reliability even under difficult production conditions Cutting current can be pre-selected in three stages Effective cooling of the plasma torch and its wear parts Quick changeover from cutting to plasma grooving and vice versa Angled torch heads and special shank designs for optimized cutting of 3D parts Wide range of applications thanks to optional equipment Liquid-cooled plasma torches The proven design of the torch components, cathode, and nozzle, is a prerequisite for the quality of the cut surfaces. The liquid cooling of the plasma fine-jet torches guarantees their long service life. Plasma cutting with the systems in the PA-S series is therefore efficient and increases the user's productivity. When cutting construction steel with the PA-S45 W, a swirl gas torch often allows for more frequent piercing. Plasma Grooving Both machine and hand torches can be quickly converted for plasma grooving. This requires changing the nozzles and attaching the ceramic cap (if necessary, with a protector). By using different plasma gases and gas mixtures, all electrically conductive materials such as construction steel, stainless steel, aluminum, and brass can be processed. Plasma grooving is ideally suited for removing welding defects, cracks, porosity, and inclusions, as well as for preparing for counter-welding. Advantages: No carbonization of the material No post-grinding required Low heat input Good observation of the process Reduction of noise levels and smoke generation