4-way forklift

Combilift CB3000/LPG /2016 year/ Perfect condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 6,766 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: Toyota 4Y, fork length: 1,065 mm, tire condition: 100 %, overall weight: 9,500 kg, empty load weight: 6,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, adjustable boom, front guard, head guard, pallet forks, sideshift, Very good condition Fork positioner + sideshift Toyota engine We sell forklifts after a full service. Nedpfx Apjz A U Snjhelg Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Nlodpfx Aei Dfidsphog Location: Available from stock in 54634 Bitburg - immediately available -

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 6,766 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: Toyota 4Y, fork length: 1,065 mm, tire condition: 100 %, overall weight: 9,500 kg, empty load weight: 6,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, Equipment: adjustable boom, front guard, head guard, pallet forks, sideshift, Very good condition Fork positioner + sideshift Toyota engine Nljdpfez Atk Sox Aphsg We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: used, Year of construction: 2012, operating hours: 4,000 h, Equipment: all wheel drive, Mini excavator New Holland E 50 B SR. * Operating weight: 4,945 kg Nlodpeup R Uuofx Aphog * Air conditioning * Year of manufacture: 2012 * Hours: 4,000 * Machine is in very good condition * Immediately ready for use

Condition: new, Year of construction: 2026, machine/vehicle number: diverse, The professional solution for crosscuts, miter cuts, and bevel cuts The ZS 200 N is ideally suited for crosscuts, miter cuts, and bevel cuts. Materials such as wood, PVC, and aluminum profiles can be processed cleanly and precisely. The saw unit runs on a hardened guide arm and can be swiveled horizontally on both sides for miter cuts. The "N" stands for "Neigung" (inclination) and indicates that the saw unit can also be tilted vertically on the side – thus, bevel cuts can also be carried out easily. Fact Check ZS 200 N Crosscut and miter saw with a maximum cutting height of 200 mm Stable cast iron construction Precise ball bearing guide of the tool carriage on hardened and ground steel shafts Manual saw feed Fast miter adjustment up to 65° horizontally and up to 60° vertically Adjustable stops and lower saw blade guard Can be connected to a dust extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical Details: Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal 45°-90°-25° Miter range vertical 60°-90°-30° Saw blade diameter 520 mm Weight 310 kg Nodpfeh Nu Iuox Aphslg Scope of delivery: Miter and bevel saw ZS 200 N Machine stand Machine can be tilted on both sides from the front Hydraulic feed brake Circular saw blade HM Z 60 negative Operating tool and hand crank

Condition: used, empty load weight: 12,360 kg, maximum load weight: 32,640 kg, first registration: 11/2010, next inspection (TÜV): 09/2024, total length: 20,000 mm, total width: 25,500 mm, total height: 7,000 mm, suspension: air, tire size: 245/70 R 17.5 /10mm, wheelbase: 1,035 mm, front tire size: 245/70 R 17.5 /10mm, operation weight: 45,000 kg,

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 6,560 mm, total length: 2,900 mm, 4-way forklift Combilift CBE 3000 Drive Electric Year built 2025 Nlodpfxoxn A Iqj Apheg Lifting height (mm) 6,560 Lifting weight (kg) 3,000

Condition: excellent (used), Year of construction: 2009, operating hours: 99,000 h, functionality: fully functional, overall weight: 2,400 kg, fuel type: electric, volume flow: 1.368 m³/h, pressure (max.): 13 bar, COMPAIR L132SR-13A Screw compressor serviced, for sale in excellent condition 123kw power, air flow: 420 m3/h Manufacturer: Compair L132SR 13A year of manufacture: 2009.04 operating hours: 99000 Nlodpotvwwbofx Aphsg Drive power: 132Kw Pressure 13 bar Flow rate: 22.8 m3/min Delcos XL control Main rotor RPM: 2980 voltage: 400v 50Hz 3 phase 85A machine weight: 2358 kg dimensions: 1722 x 920 x 1659

Year of construction: 2007, condition: good (used), machine/vehicle number: 164883, OFFER 17015 Technical data: - BIA-certified welding fume extraction unit - Articulated extraction arm 3000 mm - Airflow rate approx. 1000 m³/h - Max. static pressure 2700 Pa - Filter area approx. m² - Filter control indicator for filter replacement - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg Nledpfx Ashw Ev Sjphog

Condition: new, power: 37 kW (50.31 HP), Year of construction: 2024, operating hours: 1 h, Technical information Nodpfxjlvrr Rs Aphslg Chassis type: articulated Make of engine: Kubota D1803 CR (3 cilinder), Stage V met DOC en Top speed: 25 km/h Functional Lifting capacity: 2.325 kg Dimensions of cargo space: 347 x 130 x 234 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information EPA Marked: yes Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: BKT Emission level: Stage V / Tier IV final Production country: NL Additional information Please contact Robert Vijn for more information = Additional options and accessories = - 3rd hydr. circuit - 4th hydr. Circuit - Additional hydraulics - Attachment bracket angular movement - Auto / hydraulic quick coupler - Battery disconnector - Demolition/FOPS cab guard - Extra counterweight - Forks - Mudguards - Original colour - Rotating beacon - Standard digging bucket