Cold light lamp

Classen+Co L 151

Condition: excellent (used), Functionality: fully functional, fimotec - fischer GmbH & Co. KG Linear vibratory drives and fork light barrier, HFA L 440 S Cccrvv0 Model: HFAL440S Condition: Used Technical data: HFA-L-4xx 230V 50Hz 200mA 126.5VA General information: Fork light barrier : OGU 120 P3K-TSSL

Condition: new, Year of construction: 2024, TFON Leveltech® Leveling And Residual Stress Relieve Machine Material Thickness (mm): 1-3 Maximum Material Width (mm): 1600 Minimum Material Length(mm): 145 Quick Change System for Straightening Rollers:Standard Cq9Jcweg Flattening Gap Adjustment: Servo Hydraulic/PLC Control Overload Protection: Standard Screen:Touch CE-Certificate:Standard Machine Size (mm):546-6735-2300 Total Weight (kg): 40000

Condition: used, Hydr. scissor lift table TREPEL - L. A. VAN EIJLE & Co. Year of construction approx. 1980 Load capacity approx. 5 ton. Platform size 1700 x 1100 mm Lift max. 515 mm Lower table height with rail rollers 535 mm Table height without rail rollers 480 mm Table height raised with rail rollers max. 1050 mm Table height raised without rail rollers max. 995 mm Travel speed rail trolley approx. 8.5 meters/min. Motor power 4 kW Mains connection 400 Volt, 50 Hz Bwb2Dc8M - Manual button for up and down on the cable - Safety limit switch - Hydraulics with tank mounted in the undercarriage - Lifting scissors with two lifting cylinders - The table could be moved on rails, 4 rollers on the base frame, Ø 200 mm - Rail rollers driven by SEW geared motor with chain Space requirement L x W x H 2070 x 1350 x 1050 mm Own weight approx. 1.3 tons. good condition

Condition: excellent (used), Functionality: fully functional, TRUMPF SE + Co KG Laser light cable, L=30m, LLK D 01 30m ST SG SPL C Model: LLKD0130mSTSGSPLC Condition: Used General: Crg33Mwntq 01 SPL 900-1070 nm 22-40-14-A8/08 1593851-023421

Year of construction: 2023, Condition: new, Aluminum angle conveyor belt with substructure including adjustable feet and machine feet to level unevenness horizontal area: 3,750mm rising area: 3,200mm angle of inclination at the bend 45° total conveyor belt length measured on the ground: 6,000mm discharge height: 2,500mm horizontal height: 250mm design: aluminum construction 2T3Ffa - double profile reinforced 90x45mm drive roller + deflection roller S235 steel welded and machined Ø100x520mm crowned, shaft fixed with clamping bearings. Drive: slip-on gear motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC including corrugated edges PVC green Conveyor belt width: 500mm 2 corrugated edges 40 high, 35mm wide, high frequency welded 46 T-40 studs, approx. 300mm pitch Belt material: 2-ply, particularly stable across the belt In the bend area, the belt is guided on both sides with 3 hold-down rollers each. The belt is designed with a 70mm edge-free zone on both sides. Due to the corrugated edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 290mm, results as follows: (top view) transverse arrangement 70+35+290+35+70mm Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: excellent (used), Functionality: fully functional, Festo Vertrieb GmbH & Co. KG Linear unit, L=650mm, 32785, SLM 32 400 KF A G CV CH 4I Model: 32785 Type: SLM32400KFAGCVCH4I Condition: Used Dpjipl General information: Stroke: 10 mm ... 1500 mm Piston Ø: 32 mm Damping: elastic damping rings/plates on both sides of the shock absorber, hard characteristic curve Installation position: any Guide: recirculating ball bearing guide Operating pressure: 0.7 MPa, 7 bar Function: double-acting Ambient temperature: -20 °C ... 60 °C Pneumatic connection: G1/8

Year of construction: 2023, Condition: as good as new (ex-display), Aluminum angled conveyor belt with substructure including adjustable feet and machine feet for levelling horizontal range: 2,500mm Fcdlq9H Rising area: 800mm Lead angle in bend: 40° Total conveyor length: 3,100mm Discharge height: 700mm Height of horizontal: 320mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive etc. ready for connection, motor 2 pcs. corrugated edges 80x45mm 2-layer particularly laterally stable Usable width 370mm

Year of construction: 2022, Condition: as good as new (ex-display), Aluminum angled conveyor incl. mobile substructure horizontal area 1,100mm Rising area 1,500mm Pitch angle in bend 60° Total conveyor length: 1,750mm Discharge height: approx. 1,600mm Height of the horizontal: 300mm (feed height) Conveyor belt width 500mm PU conveyor belt including driver and corrugated edge petrol matt Drive: motor 0.25KW, speed 0.2m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 4x freely steerable transport rollers with parking brake 2 pcs. corrugated edges 50x35mm Pxxjxi 11 pieces T-50 studs welded on in the middle - 481mm pitch 2-layer particularly laterally stable Usable width 290mm, results as follows: Transverse arrangement -70+30-5+290-5+30-70mm

Year of construction: 2022, Condition: new, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt D2Jn3Nv Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Year of construction: 2022, Condition: new, machine/vehicle number: 2022022209, Aluminum angled conveyor belt with substructure Conveyor length: 1500mm flat + 4000mm rising Pitch angle in bend 45°C Discharge height: approx. 3000mm Height of the horizontal top edge 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 400mm T30 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+180-5+35+70 Full-surface underlay sheet Drive: Motor approx. 0.25KW Caovziwxkv Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54 Incl. construction for hanging the overbelt magnetic separator in the horizontal.

Year of construction: 2021, Condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Cdjegedy Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: refurbished (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 65039, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Moving column machine Work table Clamping surface mm 1500 x 1000 Table height mm 750 Number of T-slots 6 Size of T-slots DIN 650 mm 18 Travels X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance top edge of table - bottom edge of spindle Spindle lower edge min/max. mm 150 / 850 Main spindle drive for speed 8000 min-1 AC motor, frequency-controlled kW 16 at 44% duty cycle Speed range: min -1 15 - 8000 Torque at 44% ED Nm 104 constant up to min -1 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect measuring system. Positioning accuracy Positioning accuracy X-,Y-axis 0Q0I8Pd0 to 1000 mm mm ± 0.0150 Repeat accuracy X-, Y-axis mm ± 0.0075 Positioning accuracy Z-axis mm ± 0.0150 Repeat accuracy Z-axis mm ± 0.0075 Tool magazine 24-fold mounted on the moving column on the right - Tool positions 24 - Tool shank (DIN 69871 / 69872) SK 40 - Max. Tool diameter mm 76 - Max. Tool length mm 250 - Max. Tool weight kg 8 Machine control Heidenhain iTNC530 optional 620

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, cooling capacity: 450 kW (611.83 HP), type of cooling: air, total width: 2,250 mm, total length: 9,000 mm, total height: 2,300 mm, AIRCOOLED CHILLER L & R KALTETECHNIK 450 KW Brand: L & R Kaltetechnik Power: 450 kW (15/10 — 35°C) Year: 2004 Type of refrigerant: R134a Refrigerant circuit: 2 pcs. Gxupuw Compressors: 2 pcs. Bitzer (screw) Options: Freecooling Hydraulic module: 1 pc. pump, expansion vessel Number of fans: 12 pcs. Dimensions: 9.00 x 2.25 x 2.30 m Condition: very good

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Cornix / Duwic The scope of delivery includes: 01x pallet rack beam, used Material color: orange Hubt0Lwcp Box profile: 140 x 50 mm Beam type: L 517 Agraffe: 3 HK (hooks) Clear width: approx. 2,705 mm 02x safety pins, used Version: sendzimir galvanized For securing the side rails General information about the item: This item is only offered for collection. Any other desired transportation or shipment of this article is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, incl. loading magazine Iemca Mini Boss 325/32 5-axis CNC sliding headstock automatic lathe CNC control Mitsubishi M 6 Turning diameter 20 mm turning length 200 mm spindle bore 24 mm Driven tools pick-up spindle-counter spindle Drive power 3.7 KW incl. very extensive tooling. Qb0Q9 The machine has become available due to age-related liquidation and is in excellent mechanical and well-maintained condition. mechanical and well-maintained condition. The machine was only operated in single-shift operation. All manuals and documents are available.

Condition: excellent (used), Year of construction: 2014, operating hours: 3,200 h, Functionality: fully functional, machine/vehicle number: G1060-0015, turning diameter over cross slide: 600 mm, turning length: 520 mm, turning diameter: 210 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 25 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 521 mm, tool mount: 40 mm, bar passage: 65 mm, chuck outer diameter: 210 mm, Equipment: documentation/manual, rotational speed infinitely variable, The NEW unused machine was purchased in June 2018 with NEW bar loader and complete accessories (ALL NEW!) and put into operation for the first time. It currently has only approx. 3200 running hours and has a tool measuring arm, parts catcher and chip conveyor. It was only used by me alone (one-man operation), mostly only for machining AL , MS , and Cu , rarely steel . It has NEVER crashed , is fully functional and can be inspected and tested under power ... It is currently still ( rarely ) used . The BREUNING IRCO ILS-MUK short bar feeder (1 meter) purchased with the machine was also only used 2-3 times a year for a few days and is of course included in the sales price! as well as all the accessories!!! This includes a 210 mm SCHUNK 4-jaw chuck + 6 sets of jaws, the 210 mm Samchully 3-jaw chuck mounted on the machine + 13 sets of jaws, an ORTLIEB collet chuck (TS 65 DL) with 11 collets from diameter 6-65. There are 6 !!! driven tools (4 axial & 2 radial) which can be used at any of the 12 turret positions. Everything is included to get started with production .... Brzthngxafe

Mileage: 125,000 km, power: 125 kW (169.95 HP), first registration: 10/2016, overall weight: 7,200 kg, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, loading space volume: 17 m³, loading space width: 2,230 mm, loading space length: 4,150 mm, loading space height: 1,850 mm, Year of construction: 2016, Condition: used, total width: 2,300 mm, total height: 3,050 mm, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * Air suspension * Automatic gearshift * Ball and jaw trailer coupling * Ewers swivel wall system * Dekra certified according to VDI 2700 and DIN EN 12642 Code XL * 4 rows of load securing * 3 seats * Cruise control * Air conditioning * ABS, ASR Cpdzihwsc3 * Lane monitoring assistant ---- Optional extras: Storage package, trailer socket 13-pin, audio system: radio with CD player MP3-capable, USB and hands-free Bluetooth, roof rack with additional DIN compartment, generator 210 A, automatic air conditioning, refrigeration compressor 170 ccm, switch for lighting in load compartment, end cross member at frame end, seats in cab: luxury driver's seat, rear underride guard Further equipment: Airbag driver's side, Traction control system (ASR), Version: C-series, Electrically adjustable and heated exterior mirrors, Long exterior mirrors, for vehicle width 2350 mm, Brake assist, Electr. Brakeforce distribution, Driving assistance system: Lane monitoring assistant, Digital tachograph, Tinted windscreen and side windows, Automatic transmission - Hi-Matic (8-speed), A-pillar grab handle, Body/bodywork: Flatbed, Instrument cluster with pixel matrix display, Fuel tank: 90 ltr, Headlight range control, Engine 3.0 l - 125 kW Diesel KAT, Radio preparation with loudspeaker, Wheelbase 3750 mm, Spare wheel with driving tires, Spare wheel holder between floor longitudinal member, Low-emission according to Euro 6 emissions standard, Seats in cab: Double passenger seat with headrests, Maintenance indicator, Gross vehicle weight 7.00 t

Condition: good (used), Year of construction: 2004, Functionality: fully functional, cooling capacity: 450 kW (611.83 HP), type of cooling: air, total width: 2,250 mm, total length: 9,000 mm, total height: 2,300 mm, warranty duration: 6 months, Air flow: 450 kW (15/10 — 35°C) Year of manufacture: 2004 Type of refrigerant: R134a Dqm22V Refrigerant circuit: 2 pcs. Compressors: 2 pcs. Bitzer (screw) Options: Freecooling Hydraulic module: 1 pc. pump, expansion vessel Number of fans: 12 pcs. Dimensions: 9.00 x 2.25 x 2.30 m Condition: very good

Condition: used, Year of construction: 1982, pressure 150 t throat 520 mm stroke 30 - 200 mm no. of strokes 15 - 60 /min distance table/ram, max. stroke up, adjustment up 650 mm table surface area 1600 x 1000 mm hole in the table 1040 x 140 mm table height over floor 1000 mm Brsorcr2Wnq passage to the back 1000 mm ram surface 1400 x 800 mm ram adjustment 120 mm power requirement 20,0 kW weight 27,5 t dimensions (WxDxH) 2,3 x 2,75 x 4,5 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, semi-automatic ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Year of construction: 2009, Condition: as good as new (ex-display), Gravimetric dosing system ConPro for up to 4 components Hu2Vqwg Total output rate: approx. 300 kg/h Description: GraviCon type PP45-400/l – Basic version User terminal with 5‘‘-colour screen (touch screen) Table housing with support Dimension: H 430 mm x D 235 mm x W 245/340 mm 2 x Gravimetric metering system I-KTW F36 for components 1 + 2 Output: up to 250 kg/h (especially for organic fibres resp. poorly flowing materials Base frame Hopper without inspection window Support plate for weighing cell incl. platform load cell 2 x Gravimetric metering system I-KTW P3 for components 3 + 4 Output: up to 70 kg/h (für colour or additives in powder form) Base frame Hopper without inspection window Support plate for weighing cell incl. platform load cell 2 x Dosing unit type CP22 for components 3 + 4 Each incl. one set of screw & barrel - execution: 10/18 (min. 1 up to max. 20 kg/h) incl. 2 x special throat incl. 2 x bin type: VB1 – 25L incl. 4 x level switch M30 x 1,5 Remark: as good as new, in use for test purposes only

Year of construction: 2000, Condition: ready for operation (used), MECOF DYNAMILL 2000/L gate year 2000 X 4000 Y 3000 Z 1500 Ek9Rj2I8L HEADER 5 AXES - 15 KW- 12000 rpm - HSK 63-A CNC FIDIA M 20/MQG 14' color graphics machine in operation at customer site

Condition: used, Year of construction: 1992, machine/vehicle number: 9202101, SECOND-HAND BRUSHING MACHINE COMEC TYPE L/2 Bkywo9Uoecp

Mileage: 125,000 km, power: 125 kW (169.95 HP), first registration: 10/2016, overall weight: 7,200 kg, fuel type: diesel, color: white, axe configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space volume: 17 m³, loading space width: 2,230 mm, loading space length: 4,150 mm, loading space height: 1,850 mm, Year of construction: 2016, Condition: used, total width: 2,300 mm, total height: 3,050 mm, Equipment: ABS, air conditioning, soot filter, * Air suspension * Automatic gearshift * Ball and jaw trailer coupling * Ewers swivel wall system * Dekra certified according to VDI 2700 and DIN EN 12642 Code XL * 4 rows of load securing * 3 seats * Cruise control * Air conditioning * ABS, ASR * Lane monitoring assistant ---- Optional extras: Storage package, trailer socket 13-pin, audio system: radio with CD player MP3-capable, USB and hands-free Bluetooth, roof rack with additional DIN compartment, generator 210 A, automatic air conditioning, refrigeration compressor 170 ccm, switch for lighting in load compartment, end cross member at frame end, seats in cab: luxury driver's seat, rear underride guard Dqndkx Further equipment: Airbag driver's side, Traction control system (ASR), Version: C-series, Electrically adjustable and heated exterior mirrors, Long exterior mirrors, for vehicle width 2350 mm, Brake assist, Electr. Brakeforce distribution, Driving assistance system: Lane monitoring assistant, Digital tachograph, Tinted windscreen and side windows, Automatic transmission - Hi-Matic (8-speed), A-pillar grab handle, Body/bodywork: Flatbed, Instrument cluster with pixel matrix display, Fuel tank: 90 ltr, Headlight range control, Engine 3.0 l - 125 kW Diesel KAT, Radio preparation with loudspeaker, Wheelbase 3750 mm, Spare wheel with driving tires, Spare wheel holder between floor longitudinal member, Low-emission according to Euro 6 emissions standard, Seats in cab: Double passenger seat with headrests, Maintenance indicator, Gross vehicle weight 7.00 t

Condition: excellent (used), Year of construction: 2013, Digital display Travel X/Y/Z 450/350/400 mm Speed 5,000 1/min Tiltable vertical milling head +/- 90° Clamping surface 800x400 mm Max. Workpiece weight 450 kg Fzjfscw

Power: 129 kW (175.39 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, loading space length: 3,420 mm, loading space width: 2,070 mm, loading space height: 400 mm, color: white, number of seats: 7, Year of construction: 2024, Condition: new, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * Truck CO 35C18H Quad-Tor torsion bar suspension * Daily 35C18H 3.0 l Rd.3750, New MY 2024 New model, * New vehicle. * 50105-White IC 194 * Wheelbase.3750,mm * G-weight:3500Kg, * Payload.9.30Kg, * 14502-Long material carrier front with cab protection * 02559-round lights on the flatbed Bhnfdaph * 06520 Trailer socket 12V 13-pin * 73239 Preparation for EC tachograph D 4.1 * 07638-Reverse speed warning beeper n.switchable * 08628-Roof shelf above windshield * 79247-USB socket driver and passenger side charging connection * 77742-Handle on A-pillar * 07820 Trailer coupling ball head * 01565-Fuel tank 86L * 02210 Spare tire dimensioning * 00726 spare wheel bearing frame end * 06094-Trapezoidal spring with auxiliary spring HA * 06650-Automatic air conditioning * 07196-Air conditioning compressor 170ccm * 00259-Comfort driver's seat w. armrest and LW support, leather * 79297-Comfort headrest * 79336-Chrome grille inserts * 02443-Leather steering wheel w. F. button for radio, telephone, menu * 72619-Steering column i. Height and tilt adjustable * 72841-Light rain sensor * 06555-Fog lights * 01605-My Radio Infotainmnt 10 inch screen with navigation * 75082-Passenger seat bench with multifunction storage/storage compartment * 01613-Alexa voice assistant * 14522-Accelerated cruise control (ACC) * 05925-Additional programmable speed limiter * 00190-Protection for oil pan * 6-speed * SW-PACKAGE CMFORT PLUS, * Sale only to traders * or export. Subject to prior sale * and erroneous information reserved,