Electric motor 5.5/8/22 kW 740/975/1475 Rpm

BEN KDY 200L-8/6/4

Year of construction: 1999, condition: used, 3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system Brew size: 2000 l Length: 2600 mm Width: 5000 mm Height: 4500 mm Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings Hodpfow U A T Ijx Adqor

Year of construction: 2000, condition: used, Used Forberg / Wynveen twinshaft paddle mixer Stainless steel housing. Mild steel paddles Capacity 750Litres Hjdpfxeg Rpf Ae Adqsr Incl. dutch user manual

Year of construction: 1991, condition: used, 2 vessel brewhouse, copper cladded (knock-out wort 13 hl). Both brewing vessels are constructed from stainless steel with copper cladding. The wort kettle is equipped with electrical heating mats. Alternatively the kettle could be retrofitted for heating via steam, which would be possible with relatively low additional investment. Additional title: 13 hl knock-out wort Capacity: 13 hl/brew Duration per brew approx.: 8 h Power: approx. 34 kW (heating mats) Hjdpfxoxbn R Dj Adqor Material: stainless steel, copper cladded Features: 1 mash-/lauter-tun, 1 wort kettle with hop strainer (electric heating, heating zones: 2 x frame, 1 x bottom), both vessels with temperature display, 2 Hilge pumps (type: Durietta I-200-5/0,25/4, (Q: 2 - 3 m³/h, H: 5.0 m)

Condition: used, Year of construction: 1984, machine/vehicle number: 0278, type of input current: three-phase, input voltage: 400 V, Mitre cold circular saw EISELE type VMS-III-S-HYD Type No. 430 Machine. No. 0278 Year of construction 1984 Sawing range at 90°: (round) Ø 120 mm Sawing area at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm. (2 gear stages + 2 motor speeds) Mitre cut 45° to the left, 90° and up to 30°(60°) to the right, infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic material quick clamping device - Infinitely adjustable hydraulic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Convenient and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life Hedpfot A Arlex Adqer - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base - Central lubrication (manually operated) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 490 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, Year of construction: 1989, saw blade diameter 320 mm cutting diameter 140 mm total power requirement 3 kW weight of the machine ca. 0,5 t Hsdpfx Adow Dvivjqsr

Condition: used, Year of construction: 1986, machine/vehicle number: 0783, type of input current: three-phase, input voltage: 400 V, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Hedpfx Ajt A Ar Sodqsr Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Year of construction: 2024, condition: new, The Agricracker AC200 is a milling machine for structure milling. Grains, beans & seeds are welknown applications. Even as fet and wet products, which are better grindable then known milling machines. Capacity 0-8 ton / hour. Flyer at the bottom of this page. Milling trials are possible. Hedpfx Aog Ugbrsdqjr

Year of construction: 1969, condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min Hjdpfx Adsd Rxw Seqer engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm weight: 720 kg

Condition: used, Kahl - Wood Pellet cooler Hodsv R Tdfopfx Adqsr 3-5 tons per hour

Condition: new, - Capacity: 15 tons - Working width: 400 x 190 mm - Manually operated - Pressure indicator Hedpsh N Uyfofx Adqor - Documentation