Machine OverviewThe ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation.Operating mode: AutomaticInfeed layout: Straight infeed (inline)speed: 1500 Paks/hour (PPH) Packaging: Tray wrap with neutral film overwrapFormat range: 0.5 L – 10 LMachine configuration: Delivered without container infeed system (to be provided by the line)Year of manufacture: 2008; Overhauled: 2022Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing.Key Technical DataModel: COMBIGIOTTO 90-MBrand: ATLANTAOperating condition: Ready for operationPackage configuration: Wrap + film on trayFilm type: NeutralTray: Available (tray packaging configuration)Machine feed type: Straight (inline)Format capability: 0.5 L to 10 L containersYear: 2008 (overhauled 2022)Automation & ControlIndustrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability).Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application.Integrated diagnostics, alarm history and counters (shift/lot totals).Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status.Electrical protection degree: IP54 for the electrical system and motors.Line IntegrationContainer infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator).Inline design simplifies alignment with fillers, labellers and downstream conveying.Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration.Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering).Condition & MaintenanceOverall status: Ready for operation.Overhaul completed in 2022 to restore full functionality.Preventive maintenance recommended: periodic inspection of film path and sealing elements, collation guides, tray magazine mechanisms, and conveyor chains/belts.Documentation and spare parts recommendations can be provided during commissioning and FAT/SAT...
Bledpfx Abexdnbzsbjg
Note: Register for free or log in, to access all information.
Registered since: 2021
296 listings online
Call
Send inquiry
Telephone & Fax
+39 344 0... show
Add to watchlist
Share
Share
I found this listing on Werktuigen: Used shrink wrapper Atlanta with tray 1500 bundles/hour, Atlanta, Combigiotto 90-M https://www.werktuigen.com/atlanta-combigiotto+90-m/wt-200-32565?utm_source=wt&utm_medium=social&utm_campaign=share&utm_content=20032565
Condition: used, Year of construction: 2008, machine/vehicle number: FA56, Machine Overview
Automatic tray plus film packer ATLANTA COMBIGIOTTO 90-M designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product with neutral shrink film, then conveys it through a shrink tunnel to obtain stable, retail-ready bundles. Ideal for beverage lines handling PET, glass or HDPE bottles. Reference No. FA56. Year 2008, overhauled in 2022. Condition: Ready for operation. Indicative output up to 25 packs/min, depending on product and format.
Operating concept: automatic grouping of bottles, tray forming/loading, film wrapping and shrink-tunnel consolidation.
Packaging configuration: Tray + neutral film (shrink).
90° infeed enables compact layouts and easy connection to existing conveyors.
Key Technical Data
Make / Model: ATLANTA COMBIGIOTTO 90-M
Operating type: Automatic
Infeed orientation: 90° side infeed
Packaging: Tray + film (neutral)
Tray magazine/formation: Available
Nominal capacity: up to 25 bundles/min (format and product dependent)
Year: 2008 (overhauled 2022)
Condition: Ready for operation
PLC: SIEMENS S7 E 300
Automation & Control
Industrial PLC-based control with operator HMI for recipe selection, speed setpoints and diagnostics.
Inverter-controlled drives for smooth acceleration and product handling.
Photoelectric sensors for product presence, jam and film detection.
Temperature-controlled shrink tunnel for consistent film performance.
Interlocked access doors with safety monitoring for guarded zones.
Line Integration
Bsdpfx Abox H Thzobelg
Upstream: accepts bottles from conveyor with 90° transfer to the infeed section; integrated selection/divider to create pack patterns before tray loading.
Downstream: discharge conveyor after shrink tunnel for connection to inspection, case handling or palletizing.
Signals and handshakes typically include start/stop, fault, emergency stop circuit integration and speed reference.
Mechanical interface and layout drawings available on request for line engineering.
Condition & Maintenance
General overhaul performed in 2022.
Machine presented as ready for operation.
Preventive maintenance recommended: periodic checks of film path, knife/sealing components, tray magazine/erector, lubrications and conveyor wear parts.
Performance & Versatility
Suitable for a wide range of cylindrical or square bottles commonly used in beverages.
Typical pack patterns achievable for bottles (e.g., 2×2, 3×2, 4×3, etc.) depending on container size and tray dimensions.
Neutral shrink film for clear presentation; tray provides rigidity and stacking strength.
Consistent bundle quality via controlled film wrapping and thermal shrink process.
Site Requirements
Electrical supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and earth).
Auxiliaries: 24 V DC.
Instrumentation voltages: 24 V AC – 230 V AC.
Electrical enclosure protection: IP54; motor protection: IP54.
Ambient conditions: temperature +5 °C to +40 °C; relative humidity 30%–80% non-condensing; altitude up to 1000 m a.s.l.; no harmful gases or explo...
Does this listing, in your opinion, violate our marketplace rules?
Share listing by e-mail
Your listing has been deleted successfully
An error has occurred
Werktuigen Trust Seal
What is the trust seal?
Werktuigen certifies selected sellers with the Werktuigen trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Werktuigen staff.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for you as buyer?
The Werktuigen trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.
Disagreements may of course still arise during the purchasing process. Werktuigen is not liable for any legal violations by buyers or sellers active on Werktuigen.
