5/2 way valve

Airtec MF 04 520-HN

Condition: good (used), Used stainless steel container / transport container / IBC Final use: Chemicals Tank cleaned and with hazardous goods approval up to 10/22 Item number: 10495 Volume: 500 litres Type: Standing in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall Base: Vaulted Topsoil: Vaulted Operating pressure according to type plate: +0.1 Bar Tank dimensions: total width: 1200mm total length: 1000mm total height: 1000mm materials: Interior: 1.4301 / AISI 304 Exterior parts: Galvanized steel facilities: Nameplate: Yes diameter outlet: approx. 70mm Outlet Type: Disc valve Bi8Yqkcpkn Outlet valve: Yes Manhole cover 400mm with clamping ring

Condition: good (used), Used stainless steel transport container / silo Number of pieces: 17 Item number: 10440 Vsshxe Last use: Unknown Capacity: 650L Type: Standing in galvanized frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall bottom: conical bottom Topsoil: Vaulted Operating pressure according to type plate: ATM Tank dimensions: distance drain to floor: 250mm total height: 1655mm total width: 830mm total length: 1030mm materials: Interior: 1.4301 / AISI 304 Outside: Galvanized steel facilities: Nameplate: yes Discharge: DN80 Outlet valve: Camlock Top panel completely removable

Condition: used, EUCHNER GmbH + Co. KG Electronic-Key adapter with PROFINET interface, V3.1.3, 106306, Ndukmhmdvr EKS A IIXA G01 ST02 03 04 Model: 106306Type: EKSAIIXAG01ST020304 Technical Data: PROFI NET24V AC-15/DC-1350 mA General: Operating voltage: 20-24-28V DCCurrent consumption: max.150 mAConnection cable: min.2x2 twistet pair copper cable shielded,min. Cat. 5Electrical data: 24V AC-12, 50mA24V DC-12, 50mA24V AC-15, 50mA24V DC-13, 50mASwitching voltage: 24-30 VSwitching current: 1-10-50 mA with short circuit protection max.100 times Protection class: in installed condition (only access side) IP67Ambient temperature: 0-55°CDimensions: 40 x 83 x 70 mm

Condition: used, Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 40 mm -Piston diameter: 50 mm Muswi8 -Piston rod: 16 mm -Dimensions: 93/67/H67 mm -Weight: 0.7 kg

Condition: used, EUCHNER GmbH + Co. KG Electronic-Key adapter with PROFINET interface, V3.1.1, 106306, EKS A IIXA G01 ST02 03 04 Model: 106306Type: EKSAIIXAG01ST020304 Technical Data: 24V DC50 mA General: Operating voltage: 20-24-28V DCCurrent consumption: max.150 mAConnection cross section: 0.14-1.5 mm²Switching voltage: 24-30 VSwitching current: 1-10-50 mA with short circuit protection max. 100 timesMounting position: front sideMounting cut-out according to DIN IEC 61554: 33 x 68 mmProtection class: in installed condition (access side only) IP67Ambient temperature: 0...+55°CMaterial -housing: PA6-GF30 grey Cx0Zntfx

Condition: new, Exhibition compressor from our showroom | Like new Advantages: Cuow7Icfmg * HANDIER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Features: * V-belt driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures high efficiency * With sound insulation hood, extremely quiet * The sound-insulating hood enables installation even in sensitive areas * Container with baked-on inner coating * 15-year guarantee on container against rusting through * All fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain cock and stopcock * Equipped with rubber oscillating elements as standard * Electrical connection 400 V/50 Hz (three-phase current) * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * For all compressors and units from 5.5 kW, starting via an automatic star-delta switch is mandatory. This is not included in the scope of delivery, but the starting relief is * Intercoolers and aftercoolers ensure rapid cooling of the compressed air produced * The low speed reduces vibrations, protects the compressor components and reduces noise * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for easy connection of an Ecomat condensate drain * Easy retrofitting of a refrigeration dryer possible * Space-saving solution with upright container Technical data Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Vessel volume 90 l Weight 162 kg Noise 69 dB(A) Dimensions (WxDxH) 775x740x1275 mm Eff. delivery 520 l/min Air outlet 3/4 "i Drive power 4.0 kW Volume: * Sound pressure level LPA: No manufacturer specifications at a distance of 4 m according to 79/113 EEC, L(PA4) * Sound power level LWA: 69 dB(A) according to DIN EN ISO 3744 (RL 2000/14/EG) * The following correlation is important in practice: The sound power level of technical sound sources at a measuring distance of 1 m is usually approx. 10 to 15 dB higher than the sound pressure level. Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon. - Fri. from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you do not receive a shipment yourself

Condition: used, A used well preserved universal drilling and milling machine Bohner and Koehle equipped with: - 3-axis digital display HEIDENHAIN - Swivel head 90° right/left - Large rotary table 800 x1200mm - central lubrication - documentation Table size 800x1200mm Table load 1000kg longitudinal movement X- axis 1000mm transversal movement Y- axis 800mm vertical movement Z- axis 800mm movement of rotary table 360 Cb8C7Hg table feed longitudinal and transversal stepless 26 - 1100mm/min Rapid feed longitudinal and cross 1600mm/min feed vertical stepless 7 - 350mm/min rapid traverse vertical 500mm/min main drive: Milling spindle drive 2,5/ 3kW spindle admission SK40 12 speeds 45 - 2800rpm Dimensions and weight of the machine: Width 220cm depth 220cm height 250cm Weight of the machine 3.300 kg Tech. Data and dimensions: Errors excepted

Condition: new, Exhibitor compressor Advantages: * HANDIER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Features: * V-belt driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures high efficiency * Tank with baked-on inner coating * Comes with all fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain valve and stopcock * Equipped with rubber oscillating elements as standard * With refrigerant dryer and bypass line * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for simple connection of an Ecomat condensate drain * High-performance refrigeration dryer with Super-Dry Technology and ECO switch-off Dpqfcd * Start-up via an automatic star-delta switch is mandatory for all compressors and units from 5.5 kW. This is not included in the scope of delivery, but the start-up relief is: * 15-year guarantee on containers against rusting through * The low speed reduces vibrations, protects the compressor components and reduces noise * Better compressed air quality and work results * Intercooler and aftercooler ensure rapid cooling of the compressed air produced * The refrigeration dryer removes the condensate from the compressed air * Equipped with a bypass line as standard * Easy retrofitting of a sound insulation hood possible (for compressors with 4 kW motor) Technical data Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Vessel volume 270 l

Condition: used, A used well preserved universal drilling and milling machine Bohner and Koehle equipped with: - 3-axis digital display HEIDENHAIN - Swivel head 90° right/left - Large rotary table 800 x1300mm - central lubrication - documentation Table size 800x1300mm Table load 1500kg longitudinal movement X- axis 1400mm Iikx89R9J transversal movement Y- axis 800mm vertical movement Z- axis 800mm movement of rotary table 360 table feed longitudinal and crosswise stepless 26 - 1100mm/min Rapid feed longitudinal and cross 1600mm/min feed vertical stepless 7 - 350mm/min rapid traverse vertical 500mm/min main drive: Milling spindle drive 2,5/ 3kW spindle admission SK40 12 speeds 45 - 2800rpm Dimensions and weight of the machine: Width 330cm depth 220cm height 250cm Weight of the machine 4000 kg Tech. Data and dimensions: Errors excepted

Condition: new, Exhibitor - Schneider compressor UNM STS 660-10-270 Condition: very good The space-saving all-rounder: The Schneider UNM STS 660 with upright design The Schneider UNM STS 660-10-270 compressor is the ideal solution for anyone looking for a powerful yet space-saving 400 volt compressor. The two-stage piston compressor with its upright design is the perfect all-rounder, especially for small and medium-sized businesses: thanks to the clever modular system of the Schneider UniMaster series, the stationary compressor can be extended at any time with a sound-insulating hood or a refrigeration dryer. There is a big plus point for the complete equipment: The Schneider UNM STS 660 includes all the necessary (safety) fittings. The advantages of the UNM STS 660-10-270 at a glance: * Powerful performance: up to 520 l/min effective delivery rate thanks to 2-cylinder unit * Upright design: space-saving due to small footprint and optimal arrangement * Low noise level: only 78 dB(A) thanks to low speed and low vibrations * Convenient maintenance: easy inspection thanks to practical hand hole opening * No rusting through: container with internal coating and 15-year guarantee * Universal use: for many applications (without permanent compressed air requirement) Technical data Schneider UniMaster STS-660-10-270: Ctzuul2Mj8 Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Vessel volume 270 l Weight 170 kg Noise 78 dB(A) Dimensions (WxDxH) 750x705x1800 mm Eff. delivery 520 l/min Air outlet 3/4 "i Drive power 4 kW Important: For compressors with a 4 kW motor, the regulations of the local electricity company must be observed. Standard equipment of the Schneider piston compressor UNM STS 660-10-270 * V-belt driven compressor: two-stage compression * Rubber oscillating elements on the feet: steady standing * Intercooler and aftercooler: rapid cooling * Condor pressure switch: high quality * Container pressure gauge: also included * Additional sleeves: Tank can be easily extended * Motor protection and safety valve: complete protection * Condensate drain cock and 3/4 inch stopcock: reliable sealing The Schneider Unimaster STS 660: Smooth running and top performance! This all-rounder not only impresses with its space-saving exterior thanks to its vertical design - its powerful interior also leaves nothing to be desired! The V-belt-driven 2-cylinder unit with its two-stage compression ensures a high level of efficiency - while running quietly at the same time. The intermediate and aftercooler as well as the large fan flywheel cool the compressed air produced. The result is impressive: An effective delivery rate of 520 l/min with a container volume of 270 liters. The STS-660-10-270 is impressive: Moderate noise level thanks to low speed The Schneider UniMaster STS-660-10-270 scores points not only in terms of design and performance.

Condition: new, Exhibitor compressor Advantages: * HANDLICHER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Features: * V-belt driven 2-cylinder unit with two-stage compression for 10 bar or increases performance and ensures high efficiency * Tank with baked-on inner coating * 15-year guarantee on tank against rusting through * All fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain cock and stopcock * Equipped with rubber oscillating elements as standard * Electrical connection 400 V/50 Hz (three-phase current) * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * For all compressors and units from 5.5 kW, starting via an automatic star-delta switch is mandatory. This is not included in the scope of delivery, but the starting relief is * Intercoolers and aftercoolers ensure rapid cooling of the compressed air produced * The low speed reduces vibrations, protects the compressor components and reduces noise * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for easy connection of an Ecomat condensate drain * Easy retrofitting of a refrigeration dryer possible * Easy retrofitting of a sound insulation hood possible (for compressors with 4 kW motor) * Space-saving solution with upright tank Technical data Ctzvsfq80I Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Volume 500 l Weight 215 kg Noise 78 dB(A) Dimensions (WxDxH) 850x850x1945 mm Eff. delivery 520 l/min Air outlet 3/4 "i Drive power 4 kW Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon.- Fri., from approx. 7 a.m. - 5 p.m., delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to leave a note for the carrier on the front door or doorbell sign on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Condition: new, Exhibitor compressor Advantages: * HANDIER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Features: * V-belt driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures high efficiency * With sound insulation hood, extremely quiet * The sound-insulating hood enables installation even in sensitive areas * Container with baked-on inner coating * 15-year guarantee on container against rusting through * All fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain cock and stopcock * Equipped with rubber oscillating elements as standard Dpqfcn * Electrical connection 400 V/50 Hz (three-phase current) * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * For all compressors and units from 5.5 kW, starting via an automatic star-delta switch is mandatory. This is not included in the scope of delivery, but the starting relief is * Intercoolers and aftercoolers ensure rapid cooling of the compressed air produced * The low speed reduces vibrations, protects the compressor components and reduces noise * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for easy connection of an Ecomat condensate drain * Easy retrofitting of a refrigeration dryer possible * The space-saving solution with upright container Technical data Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Volume 500 l Weight 254 kg Noise 69 dB(A) Dimensions (WxDxH) 850x850x2055 mm Eff. delivery 520 l/min Air outlet 3/4 "i Drive power 4.0 kW Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon.- Fri., from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to put a note on the door of your house or apartment or on the doorbell on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Condition: new, Exhibitor compressor Features: * The traditional solution with horizontal container * V-belt driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures high efficiency * With sound insulation hood, extremely quiet * The sound-insulating hood enables installation even in sensitive areas * Container with baked-on inner coating * 15-year guarantee on container against rusting through * All fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain cock and stopcock * Equipped with rubber oscillating elements as standard * Electrical connection 400 V/50 Hz (three-phase current) * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * For all compressors and units from 5.5 kW, starting via an automatic star-delta switch is mandatory. This is not included in the scope of delivery, but the starting relief is * Intercoolers and aftercoolers ensure rapid cooling of the compressed air produced * The low speed reduces vibrations, protects the compressor components and reduces noise * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for easy connection of an Ecomat condensate drain Technical data Dpqfcx Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Vessel vol. 270 l Weight 213 kg Noise 69 dB(A) Dimensions (WxDxH) 1620x600x1315 mm eff. delivery 520 l/min Air outlet 3/4 "i Drive power 4.0 kW Volume: * Sound pressure level LPA: No manufacturer specifications at a distance of 4 m according to 79/113 EEC, L(PA4) * Sound power level LWA: 69 dB(A) according to DIN EN ISO 3744 (RL 2000/14/EG) * The following correlation is important in practice: The sound power level of technical sound sources at a measuring distance of 1 m is usually approx. 10 to 15 dB higher than the sound pressure level. Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon. - Fri. from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to put a note on the door of your house or apartment or on the doorbell on the expected delivery days. When ordering, please be sure to include a telephone number

Mileage: 349,385 km, Power: 390 kW (530.25 HP), First registration: 04/2020, Fuel type: diesel, Color: grey, Axe configuration: 4x2, Tire size: 315/60 R22,5, Fuel: diesel, Wheelbase: 38,000 mm, Driver cabin: sleeper cab, Gearing type: automatic, Emission class: euro6, Suspension: air, Year of construction: 2020, Condition: used, Equipment: Abs, Air Conditioning, Cruise Control, Navigation System, Parking Heater, Sleeping Cabin, Spoiler, = Further options and accessories = - Aluminum fuel tank - Roof spoiler - Electric front windows - Speed limiter - heater - Refrigerator - Alloy wheels - Radio / CD player - reversing camera - Sleeper - Side mudguards - Sunshade - X-LOW - Xenon headlights - Central locking - Central locking with remote control Notes = = Full air suspension Lifting arm 98 -119 cm Air conditioning Refrigerator Adaptive cruise control Auxiliary heating Xenon lighting Leather upholstery = Further information = General information Cabin: simple Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 7,945 kg Uvc7Ucecjj Transmission Transmission: 12 gears, automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 315/60 R22.5; LM rims; Max. Axle load: 7100 kg; Steered; Tire tread left: 80%; Tire tread right: 80% Rear axle: Refenmaß: 295/60 R22,5; Double tires; LM rims; Max. Axle load: 11500 kg; Inner left tire tread: 50%; Outer left tire tread: 50%; Inner right tire tread: 50%; Outer right tire tread: 50% Interior Interior: gray, leather condition General condition: very good Technical condition: good Optical condition: very good Number of keys: 2

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Cccpzq0 Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: used, Year of construction: 2001, Gearing type: other, Color: orange, Mileage: 1,001 km, First registration: 01/2001, Empty load weight: 850 kg, Driver cabin: other, Vehicle location: in transit, Dismantling of Daimler-Benz Atego 1018 AK 4x4! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Umafw2Trxn

Condition: ready for operation (used), ABB DSQC 354 Profibus module . 3HNE 00065-1/04 SN:304699#99420102 , used, normal signs of wear, 100% functional, scope of delivery as per photos Cj3Ux3Ussf

Mileage: 723,000 km, First registration: 01/2016, Color: blue, Axe configuration: 4x2, Tire size: 385/55r22.5, Wheelbase: 3,800 mm, Driver cabin: sleeper cab, Gearing type: automatic, Emission class: euro6, Suspension: steel-air, Year of construction: 2016, Condition: like new (used), Functionality: fully functional, Equipment: Air Conditioning, Ref.: 2781. RENAULT tractor unit model T 520 HIGH COMFORT, automatic transmission, EURO 6, full spoilers, 2 bunk beds, air conditioning, refrigerator, disc brakes, front leaf spring suspension and rear air suspension, aluminum wheels, front tire dimensions 385/55r22.5 and rear 315/70r22.5, wheelbase 3.8 meters, ... in perfect condition!!!! Udz3Uksxxf

Mileage: 871,000 km, First registration: 08/2014, Overall weight: 40,000 kg, Fuel type: diesel, Axe configuration: 4x2, Tire size: -, Emission class: none, Year of construction: 2014, Condition: used, Scania R 520 4x2 KIPPZUG Standard with REISCH 3-axle tipping trailer !! TOP CONDITION !!! SCANIA motorized car: EURO 6 Intarder Tipping hydraulics Trailer - stretch brake Automatic transmission with clutch pedal E2Pndge Differential lock Hill start assist TC disengageable Automatic climate control stationary air conditioning Full air suspension! Parking heater: hot water Stainless steel exhaust system behind cab CHROM lamp bracket with additional headlights Rotating beacons Compressed air horns XENON headlights Comfort driver's seat: heated and ventilated 2 recliners Flue gas reducer RADIO / CD player CB radio telephone Coffee machine USB connection HIFI loudspeaker system Multifunction steering wheel 400 liter stainless steel tank Wheelbase: 3,800 mm Unladen weight: 9,760 kg GG. : 18,000 kg / 19,500 kg technically possible! ALCOA rims Tires: 385 / 65 R 22.5 front 315 / 80 R 22.5 rear Tire profile: 8/10 8/10 12/10 ALU tipper body Steel floor ALU side walls Roll-up tarpaulin Grain pusher platform REISCH trailer: EZ 12.03.2009 Full air suspension 3 x BPW ECO Plus axles ABS / EBS ALU tipper body Steel floor with lashing eyes Split, side ALU drop sides Steel tailgate Grain pusher Tires: 385/65 R 22.5 GG.: 24,000 kg - German vehicles! - HU/ TÜV: NEW! Subject to errors and prior sale!

Mileage: 349,385 km, Power: 390 kW (530.25 HP), First registration: 04/2020, Fuel type: diesel, Color: grey, Axe configuration: 4x2, Empty load weight: 7,945 kg, Tire size: 315/60 R22,5, Wheelbase: 38,000 mm, Driver cabin: sleeper cab, Gearing type: automatic, Emission class: euro6, Suspension: air/air, Year of construction: 2020, Condition: used, Equipment: Abs, Air Conditioning, Cruise Control, Navigation System, Parking Heater, Spoiler, Weitere Optionen und Zubehör Aluminum Kraftstofftank, Dachspoiler, Elektrische Fensterheber vorn, Geschwindigkeitsbegrenzer, Heizung, Kühlschrank, Leichtmetallräder, Radio / CD - Player, Rückfahrkamera, Schläfer, Seitliche Kotflügel, Sonnenschirm, X-LOW, Xenonscheinwerfer, Zentralverriegelung, Zentralverriegelung mit Fernbedienung Anmerkungen Vollluftfederung Hubarm 98 -119 cm Klimatisierung Kühlschrank Adaptiver Tempomat Standheizung Xenon lighting Leder-Polsterung Further Information Getriebe: 12 Gänge, Automatik, Konstruktionsjahr: 2020, Kabine: einfach, Schlafkabine, Bremsen: Scheibenbremsen, Federung: Luftfederung, Vorderachse: Refenmaß: 315/60 R22,5, LM Felgen, Max. Achslast: 7100 kg, Gelenkt, Reifen Profil left: 80%, Reifen Profil right: 80%, Hinterachse: Refenmaß: 295/60 R22,5, Doppelbereift, LM Felgen, Max. Achslast: 11500 kg, Reifen Profil left innnerhalb: 50%, Reifen Profil left außen: 50%, Reifen Profil right innerhalb: 50%, Reifen Profil right außen: 50%, Zylinderzahl: 6, Motorhubraum: 12,777 cc, Innenraum: grau, Leather, Allgemeiner Zustand: sehr gut, Technischer Zustand: gut, Optischer Zustand: sehr gut, 2 Schlüssel P0Kdamv9Mv

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Hu3N8Kw Feeding speed: 104 m / min Required power: 1,5 kW Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Color: yellow, Overall weight: 5,500 kg, Year of construction: 2018, Condition: excellent (used), Equipment: All Wheel Drive, Cabin, JCB 520-40 telescopic handler 2018 Extension 4 meters / lifting capacity 2000 kg Four swivel wheels 4x4 drive Work lights Udzcr2Wron Hydraulic outlets Equipped with pallet forks Brought to you by The information posted in the ad is for informational purposes only. Do not constitute an offer within the meaning of the Civil Code, referred to in Article 4 of the Act of 27. 07. 2002 on special conditions of consumer sales. Agreeing on the terms, price, accessories, specifications takes place at the sale of machines. To confirm the availability of the offered machines, please contact us by phone.

Mileage: 975,989 km, Power: 382 kW (519.37 HP), First registration: 12/2015, Fuel type: diesel, Color: white, Axe configuration: 4x2, Tire size: 315/60R22.5, Fuel: diesel, Driver cabin: sleeper cab, Gearing type: automatic, Emission class: euro6, Suspension: air, Year of construction: 2015, Condition: used, Equipment: Abs, Air Conditioning, Cruise Control, Parking Heater, Sleeping Cabin, Spoiler, Traction Control, Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Drivetrain AdBlue system: Yes Transmission Transmission: 12 gears, Automatic Axle configuration Brakes: disc brakes Suspension: air suspension Front axle: Tyre size: 315/60R22.5; Max. axle load: 7500 kg; Steering; Tyre profile left: 60%; Tyre profile right: 60% Rear axle: Tyre size: 295/60R22.5; Max. axle load: 11500 kg; Tyre profile left: 60%; Tyre profile right: 60% Weights Empty weight: 8.171 kg Gxcxbri Carrying capacity: 10.829 kg GVW: 19.000 kg Additional information Please contact Rob Veldhuis or Arjan Kamsteeg for more information

Color: orange, Condition: used, Machine/vehicle number: 3583, We are selling a Schmidt brand snow plow, the width of the blade is 3.0 m. Data according to type plate Type: MF Weight: 840 kg There is currently no scraper blade attached, but it can be added for an extra charge if necessary. In our opinion, the snow plow is otherwise in good condition and can be used. Czipwvxq

Condition: used, Year of construction: 2004, Gearing type: other, Color: orange, Mileage: 1,001 km, First registration: 01/2004, Empty load weight: 860 kg, Driver cabin: other, Vehicle location: Bovenden, Clearing width 2546mm, weight approx. 860kg! Dismantling of MAN LE 18.280 4X4 BB! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dpgxnj - .