Techno Service Line

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 64,817 h, machine/vehicle number: 260R6F441, overall weight: 1,500 kg, These are Juki SMD placement machines from two SMD lines. The machine listed is an example from the total of 3 x KE-2050RL and 4 x KE-2060RL machines, with one KE-2050RL used as a spare parts machine and not in working order. The operating hours vary between 37,248 and 66,223. Also offered are 4 tray changers, 2 x TR6SN, serial numbers: TR6-6SA75, TR6-6SA42, year of manufacture: 2006, 1 x TR6SNR, serial number: 6S7-F1090, year of manufacture: 2006, and 1 x TR4N, serial number: TR6-4018, year of manufacture: 2006, as well as accessories. Furthermore, a comprehensive feeder package is available. Details with Juki designations can be found in the list and for the docking cart. Gsdpfj Ai Exaox Aglskd Also on offer is an X-ray inspection system: Phoenix X-Ray, PCB I a|analyser 160, year of manufacture: 2004, as well as a semi-automatic solder paste printer, Ekra E1, year of manufacture: 1999. Please refer to the attached machine list and the attached images for details. More and more detailed images can be accessed directly from us. The machines and accessories can be inspected. The price listed below refers to the SMD placement machine KE-2060RL, 260R6F441, mentioned above.

Condition: good (used), Year of construction: 2005, Process chamber with a new air guidance system in the peak area Cooling zone with condensate filter Transport system (belt conveyor) CAN-BUS control / touch screen color monitor Voltage 230/400V Direction of travel: left to right Infeed height: left to right Gjdpfxs Aitgns Aglskd Infeed height: 830 +/- 20mm Fan speed control Bottom-side heating in the peak area

Condition: used, Year of construction: 2009, Max. PCB dimensions: 457x508mm, edge clearance top/bottom: 3mm, component clearance top: 90mm, bottom: 40mm, extended component clearance top: 190mm, supported applicators: AP nozzle diameter (standard): 2.5-16mm, extended AP nozzle diameter: 2.5-20mm, micro nozzle diameter: 1.5-2.5mm, jet tip nozzle diameter: 6-20mm, max. jet wave nozzle width: 25mm, height without signal tower: 1403mm, length: 1351mm, width: 1000mm. Equipment: manual loading, Drop Jet Fluxer with Dual Control System, titanium solder pot for up to 10kg of solder, motor control for X-, Y- and Z-axes, automatic solder replenishment (solder wire) and solder wave height detection, teach-in camera, Top-Side Preheat (upper heating with 4 segments, closed-loop temperature control), process camera, automatic solder feeding with solder level detection, Auto Fiducial System, Pillarpad offline programming software, machine refurbished in 2022, software upgraded to Windows 10 and new PH software. With PILLARHOUSE PILLARGEN-40 nitrogen generator, year of manufacture: 2022, 40l/min at 50ppm residual oxygen, with communication interface to the soldering system, air drying module and oil separator. An on-site inspection is possible. Gkjde Ah Ty Hopfx Agled

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, Machine in great condition! Available Q1-Q2 2027 Gsdpe Ahw I Uefx Aglskd

Condition: used, Year of construction: 2008, Control system: Beckhoff, operation: touchscreen. Equipment: extraction system, milling and sawing separation, shuttle/loading system, enclosed machining area, safety enclosure with viewing windows, emergency stop switch, start/stop push buttons, three-color signal tower, pneumatic air preparation unit, Ruwac industrial vacuum cleaner. The system is operational and was shut down at the beginning of the year. Inspection possible by arrangement. Gjdpfxe Ahi Tve Agljkd

Condition: used, Year of construction: 2012, Software version: 717 R23-1, mains voltage: 3x400V, rated current: 7.5A per phase, fuse protection: 3x16A, compressed air supply: 5-10bar, compressed air consumption: 600Nl/min, operation: SIPLACE user interface with monitor, connected load: 2.5kW, length: 1500mm, width: 2475mm, height: 2030mm, weight: 2.31t, without setup tables and component feeders, with CE marking. An on-site inspection is possible. Gsde Agn Riepfx Agljkd

Condition: used, Year of construction: 2007, Rated voltage: 230V AC, frequency: 50Hz, rated current: 6.3A, control voltage: 24V DC, compressed air supply: 5bar, compressed air consumption: 5Nl/min, connected load: 0.34kW, length: 790mm, width: 950mm, height: 1270mm, weight: 135kg. An on-site inspection is possible. Gkedpfxj Agn Rmo Agljd

Condition: used, Year of construction: 2011, Rated voltage: 230V AC, frequency: 50Hz, rated current: 6.3A, control voltage: 24V DC, compressed air supply: 5bar, compressed air consumption: 5Nl/min, connected load: 0.34kW, length: 790mm, width: 950mm, height: 1270mm, weight: 135kg. An on-site inspection is possible. Gkjdpfx Ao Agn Rqjgljd

Condition: used, Year of construction: 2018, Technical specifications Bareboard loader with buffer function Manufacturer: ASYS Model: LLB 01 Year of manufacture: 2018 PCB dimensions: min. 70x80mm - max. 250x330mm PCB thickness: 0.8 - 4.0mm Buffer capacity: 5 PCBs Automatic width adjustment Separately driven conveyor belts SMEMA interface Gsde Agf Efjpfx Aglekd Complete documentation Condition: Used, functional

Condition: good (used), Year of construction: 2015, • ASYS INSIGNUM 2000 CO₂ laser with integrated rotating station • Year of manufacture: 2015 • Max. marking area: 350 x 350 mm (without axis movement) • Printed circuit board formats: Min. 70 x 50 mm to Max. 460 x 460 mm • Board thickness: 0.8 mm to 3.0 mm (Permissible weight up to 2/3 kg) • Camera system: Integrated camera • Connection power: 230 V / 50 Hz / approx. 0.7 kW Gkodpfx Agj Agfwqolsd • Compressed air supply: 6 bar • Dimensions (approx.): 701 mm x 1,548 mm x 1,522 mm (LxWxH) • Incl. extraction system

Condition: good (used), Year of construction: 2015, • Manufacturer: ASYS Automatisierungssysteme GmbH • Model: VEGO AMS 03D (End of Line Station) • Year of manufacture: 2015 • Magazine loader for three magazines • Interface: SMEMA • Transport height: 950 mm ± 50 mm (standard) • Automatic width adjustment • Connection power: 230 V / 50 Hz / 0.5 kW • Compressed air connection: 6 bar • Dimensions (approx.): 1,100 mm x 1,470 mm x 1,120 mm (L x W x H) • Weight: approx. 400 kg Gksdps Agfunsfx Aglod

Condition: good (used), Specification ASSCON Quicky 450 Type Batch vapor-phase soldering machine Maximum PCB/workpiece size 450 × 450 mm Maximum component height 50 mm Soldering temperature 100–260 °C Supply voltage 230 V / 50 Hz Connected power 3.5 kW Average power consumption at full load 1.5 kW Medium filling (Galden) 2 kg Standard cycle time approx. 6 minutes Dimensions (w × d × h) 600 × 635 × 1,135 mm Weight approx. 180 kg Gsdpe Afy Eqefx Aglokd

Condition: used, Year of construction: 2006, Total of 8 working modules, plus 2 for spare parts (partially stripped). Head configuration per machines can be found under photos! Selling as a full set! Gkodpo Afuv Eefx Agled

Condition: used, functionality: fully functional, Year of construction: 2010, Fully functional. Good mechanical Manual, software CD and print supports included.  Gjdpfxs Adr Ags Aglokd

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Rehm vacuum vapor phase soldering system Year of manufacture: 04/2014 Service recently performed by Rehm in October 2026 Vacuum package Manual loading and unloading of the process chamber in the operator area Gsdjz Tdi Sopfx Aglekd Air cooling directly above the assembly in the cooling area 1 basic work piece carrier, 650x650mm Automatic Galden filling system (25 kg HS 240) Water-cooled cooling section Camera for process monitoring

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, For sale is an automation cell from the brand EROWA, type Robot Dynamic 150 Linear (ERD 150L), including the process control system JMS 4.0 MoldLine. With the exception of the gantry eroding machine, all production and measuring machines have already been sold. Only the EROWA automation is offered; the Gantry Eagle 500 can be offered separately. The system was put into operation in mid-2020 and is in very good and well-maintained condition. Technical data: Year of construction: 2020 Control / control system: JMS 4.0 MoldLine from Certa Systems Magazine capacity (total): - 20 pallet spaces for PARTOOL clamping system - 360 spaces for EROWA ITS 50 Turret rotation radius: -30° to +300° Transfer weight max.: 150 kg Godez Szh Nopfx Aglekd Identification system: EWIS 10 (ID chips) Loading station: Yes, with rotary table Safety enclosure: Yes, according to layout Acceptance: Complete CE acceptance Included in the offer: 3 gripper arms and grippers with RCS coupling, as well as RCS gripper S, support gripper for ITS 50, collection tray on the rotary turret, gripper station (Gripper Dock), software license for Robot Dynamic 150 L, machine interface box including interfaces, loading station, enclosure including all elements and doors, CMM - light curtain system. Note regarding tooling & coaching: The chucks, adapter pallets, vices, Partool tooling, and EROWA ITS holders are NOT included. Coaching by EROWA Automation is not included in the scope of delivery. Upon request, transport and loading can be organized throughout Europe for an additional charge. Prices do not include VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, Year of construction: 2015, Camera resolution: 15um, Max PCB size: 510mm x 510mm, ePM-AOI software for progtam making, OCR, Review station Ask for quotation and additional information! Gkedpfsz Sub Nsx Aglod

Condition: excellent (used), We are selling our Seho Powerwave N2 wave soldering machine. The Powerwave N2 is a fully automatic nitrogen wave soldering machine for cost-effective electronics manufacturing. Year of manufacture: 2015 Gkodpfxez Il Nbs Aglod Serial number: 15091295945 Special feature: In 2023, the machine was equipped with a "new" soldering module (lead-free). Lifting station Lowering station The machine has already been dismantled and is available immediately. Current location: in our factory in Romania (Satu Mare). If there is serious purchase interest, the machine can also be brought to Germany. A video of the machine in operation is available upon request.

Condition: excellent (used), For sale is our Viscom AOI S3088-III in very good condition. Viscom S3088-III Year of manufacture: 11/2010 Serial number: 100967 Connection: 230/400V 3P/N/PE Frequency: 50-60 Hz Weight: 750 kg Operating system: Windows 10 Enterprise 2016 LTSB, 64-bit Processor: Intel Core i7-6700K, 4.00 GHz RAM: 32 GB Camera technology: 8M with color cameras and white LED lighting Sensor head: 4 cameras orthogonal (top view), 4 cameras lateral Software version: SI 9.70(11) Open eVision licenses: OCR and DMC Last calibration: 05.12.2025 Grayscale MFU from 03.12.2025: passed Geometric MFU from 03.12.2025: passed Gkodpfx Agjz H Nl Rolsd The system has been inspected and found to be in good working order. Functional video available. Inspection is welcome.

Condition: used, Felsomat gantry robot loading unit with Siemens PLC Swivel-arm loader, 4-axle, table buffer, blow-off station, intermediate storage, s shuttle, Fritz Werner TC 2.5K Rail length 1,500mm. Gkjdpjz Hzygefx Agljd Upright height 2,300mm. With transfer unit.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, FUJI NXT placement machine / pick & place FUJI NXT M6 II (based on the M4 module) Configuration: Single-track design Current software versions (V 9.8.1) Gjdpfez Hxbnex Aglekd Heads: 1 H01 and 1 H12S Left-to-right running direction Very good condition. The modules are in top condition, having undergone technical refurbishment, and will be delivered ready for immediate use. In addition, we could also supply 2 additional placement heads: 1 H08 and 1 H04. Including nozzle stations. Very good condition. Inspection possible by appointment.

Condition: good (used), functionality: fully functional, Double wave Preheating Spray fluxer 10 soldering frames Gedjz Hw Tcopfx Aglskd

Condition: ready for operation (used), Year of construction: 2010, Laser + vision: chips and large ICs / QFP / BGA up to 74 mm Gksdjz Hwpqspfx Agljd Possible to buy with 200 feeder package

Condition: used, functionality: fully functional, Year of construction: 2010, 13,200 CPH with 4-nozzle laser head. Up to 200 feeders also available per request. Gksdpfez Hwl Ejx Agljd

Condition: used, functionality: fully functional, Year of construction: 2010, total length: 3,590 mm, total width: 1,432 mm, total height: 1,478 mm, overall weight: 870 kg, We offer this ready-to-use Rehm VXS basic 2100 (Type 422) reflow oven for SMT/re-flow soldering, manufactured in 2010. - Manufactured in 02/2010, put into operation on April 16, 2010 - Special shortened version, 7 zones: 4x preheating, 2x PEAK, 1x cooling - Operated in a single-shift mode from 04/2010 to 07/2021 (approx. 11 years), has been out of operation since then - Regularly serviced and cleaned; only one service intervention during the entire operating period (repair of the transport trolley, 06/2016) - Dimensions: 3,590 × 1,432 × 1,478 mm (L × W × H, ±50 mm) - Purchased as new directly from Rehm (original purchase price approx. 1.43 million CZK) Gedpfx Agjz Hnz Rjljkd - Data sheet and operating records available for viewing/download - Inspection and collection: Bonnel Technologie s.r.o., Wolkerova 2304/38, Cheb, Czech Republic (near the Bavarian border) If you have any questions or require further information, please feel free to send us a message or contact us by phone.