Tractoroexport

Condition: excellent (used), functionality: fully functional, Key operating parameters and performance: Lrodpfxoy Ud T Re Aa Ejl Drying temperature: from 30 °C to 160 °C (adjustable via a precise 3-point controller). Dew point: stable at approximately -60 °C, ensuring thorough drying of hygroscopic materials. Dry air flow rate: from 80 m³/h to 180 m³/h for devices in the compact series. Pre-drying time: reduced to only 3–4 hours for standard materials. Throughput: from 4 kg/h to 70 kg/h (values measured for Polyamide PA max).

Condition: used, No. 3 Cardboard benches with aspirator (2 galvanized and 1 green) Lrodey Ud T Dopfx Aa Eel

Condition: used, Oma brand sander for turned wood, model Cosbo 120 serial number 071178, used. Lredoy Ud Twspfx Aa Ejl

Condition: used, Stock of leather processing machinery Lodpfxoy Ud Tko Aa Eorl

Condition: used, Scale with maximum capacity of 6 tons, minimum 40 kg, overall dimensions 610 x 110 cm, h. 90 Ledpey Ud Tdjfx Aa Eorl

Condition: used, Painting line consisting of chain, rails and drive motor, approximate length 300 m. Used Lodpfx Aajy Ud S Tj Eerl

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: HZ134, Zasche portal crane, gantry crane Type KP500-3.5/3.19 Load capacity/lifting capacity: 500 kg Lodpfx Aasy Ud S Hs Esrl Technical data of the system: Crane track/steel structure consisting of IPE160 beam / square tube 90x90, standing on 4 heavy-duty swivel casters (200 mm) with 250 kg Demag PK chain hoist Overall height approx. 3.36 m Width approx. 3.5 m Bottom edge of the rail approx. 3.19 cm Depth approx. 160 cm Hook height approx. 2.7 m The crane is disassembled and immediately available. The location of the item is 75053 Gondelsheim. Very good condition, see pictures. Shipping by freight forwarder or collection only by prior arrangement.

Condition: used, Used cabinet door drilling machine with 8 drilling units on the right side and 4 drilling units with heads on the left side. Lodpfxjy Ud Sys Aa Esrl

Condition: used, Year of construction: 1996, Uniconfort brand hot water generator with 540,000 kcal/h Lrsdpfx Aoy Ud Stja Eel Kcal/h: 540.000

Condition: used, Binks B8 High-Pressure Paint Spraying Pump Ljdpfjy Ud Smox Aa Eorl The BINKS B8 pumping unit is produced by BINKS, a company known for spray guns and accessories since 1890. Binks products are used in a wide range of industries worldwide, from automotive to industrial coating solutions. The BINKS B8 pumping unit is versatile and suitable for a wide range of industrial and automotive applications. Price of the new:

Condition: used, Year of construction: 2005, 2005 BIESSE ROVER B 4.40 FT 3-axis CNC machining center Technical features in the last photo Lsdpfey Ud Sgox Aa Ejrl Engine hours on: 45,343 Machine hours in automatic operation (work): 27,267

Condition: used, Ascom FS53 530mm Surface Planer Ledpfxey Ud Saj Aa Ejrl

Condition: used, Year of construction: 1993, Camam brand equalizer Lrsdpfx Asy Ud R Nea Eel

Condition: used, Year of construction: 2000, Painting plant consisting of: Ljdpfoy Ud R Ajx Aa Ejrl - Painting robot brand CMA, mod. Roby 5 Ex G, used, tested - Circular dry filtering cabin, complete with extractors, water scrubber, external fume extractor for solvent storage, scale and various accessories - electrical panel, use and maintenance manuals, wiring diagrams, etc.

Condition: used, Used Promac electronic sander for components, complete with soundproof cabinet. This machine is ideal for sanding components on four sides with coarse grit from 6 to 50 (planing) (see technical specifications in the photos). Lrodpfx Aoy Ud Rvja Eol

Condition: used, Hydraulic horizontal clamp Lrjdpey Ud Rpjfx Aa Eol

Condition: used, mileage: 1,070,851 km, first registration: 10/2015, tire size: 315/70 R22.5, axle configuration: 4x2, brakes: retarder, color: other, driver cabin: sleeper cab, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, retarder, second fuel tank, soot filter, spoiler, = Additional options and accessories = Lsdpfsy Ud Rcex Aa Eerl - Roof spoiler - Aluminum fuel tank - Engine brake - Particulate filter - Headlights - Visor - Alternating current - Toolbox = Additional information = Tire size: 315/70 R22.5 Brakes: Disc brakes Front axle: Steerable; tire tread depth left: 11 mm; tire tread depth right: 11 mm; suspension: leaf spring suspension Rear axle: Double tires; tire tread depth left inner: 9 mm; tire tread depth left outer: 9 mm; tire tread depth right inner: 9 mm; tire tread depth right outer: 9 mm; suspension: air suspension Unladen weight: 8,221 kg Payload: 10,779 kg GVWR: 19,000 kg Damage: none

Condition: ready for operation (used), Romanian CFL 5000 Nominal weight of falling part – 5000 kg Max. stroke – 1700 mm Impact energy – 17000 kg-m Daylight between columns – 3900 mm Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Romanian CFL 3150 Lrsdpfxoy Ud N Ss Aa Esl Nominal weight of falling part – 3150 kg Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Weight approximately 87 tons Video showing the machine in operation available!

Condition: new, 40 ready-made straps Lrodsy Ud Nxspfx Aa Eel 5580 mm 48 mm

Condition: new, Oil meter, conoil. Lrjdpfx Aaey Ud Nfo Eol

Condition: used, functionality: fully functional, mileage: 245,000 km, first registration: 10/2003, fuel type: diesel, empty load weight: 4,800 kg, maximum load weight: 2,700 kg, overall weight: 7,500 kg, tire condition: 50 %, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, fuel tank capacity: 200 l, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 2, permissible axle load (axle 1): 3,400 kg, permissible axle load (axle 2): 5,000 kg, loading space length: 4,520 mm, loading space width: 2,270 mm, Equipment: ABS, air conditioning, central locking, Mercedes-Benz Atego 818 Three-sided tipper (internal dimensions: 4.52m long / 2.27m wide / 0.50m high) 4x2 Leaf-sprung suspension Manual transmission Euro 3 GVWR 7,500kg - Payload 2,700kg Total truck length 6.46m Tires with 50% tread Wheelbase 3.40m ADR approved for AT Spare wheel Lodjy Ud Inopfx Aa Esrl Electric windows and exterior mirrors Air conditioning Sun visor Air-suspended driver's seat Radio ABS All information subject to change without notice; errors and omissions excepted.

Condition: used, Year of construction: 2014, Ask for additional information! EU version. Ledpey Ud Ihjfx Aa Esrl

Condition: new, Year of construction: 2026, temperature: 230 °C, inner dimension length: 3,800 mm, inner dimension width: 1,600 mm, inner dimension height: 2,270 mm, total length: 4,560 mm, total width: 2,080 mm, total height: 3,270 mm, control type: PLC-controlled, Equipment: CE marking, Powder Coating Oven (Oil/Gas) Internal dimensions (L x W x H): 3800 x 1600 x 2270 mm External dimensions (L x W x H): 4560 x 2080 x 3270 mm Fuel: Oil or GAS, burner type selectable by the buyer Heating power: 160 kW (2 burners total) Maximum working temperature: 230°C Ljdpfx Ajy Ud H Rja Eorl Heat-resistant recirculating fans: 2 x 1.1 kW 10" Touch Screen Control Functions: Preheating, Degassing, Drying, Polymerization Temperature sensors in the working chamber: 2 units Two-wing doors on both sides (tunnel design) Ready for 5 rails (rails not included) Key Features: Robust construction Special frame design minimizes heat loss Removable side panels for easy maintenance Equipped with strategically placed ventilation slots to maintain insulation integrity Stainless steel panels in the heat exchanger zone In-house engineered, heat-resistant fans – cool, quiet, and long-lasting Doors equipped with explosion-proof, adjustable latches Special door handle design for reduced heat transfer Reliable Italian RIELLO burners Control Features 10" Touch Screen Control Standard programs: Preheating, Degassing, Curing, Drying Stores multiple curing recipes Integrated safety features HNS – Heat Management System, measures air temperature at multiple points, preventing overheating of curing parts Drying mode – time-controlled exhaust and fresh air intake Vent mode – for higher finish quality Delivery within 2 weeks after payment We can arrange delivery across the EU at a special price. PRICES DO NOT INCLUDE VAT. WE ARE LOOKING FOR SALES PARTNERS.

Condition: good (used), Year of construction: 2016, Packaging machine. Parts shown by hand not come. Lrodpfxoy Ud H Ds Aa Eel

Condition: used, DWS DigitalWax 029X Vintage: 07/2020 Laser: Class 3 Voltage: 110–230V, 50–60 Hz Power: 400W Lrjdpjy Ud Hwefx Aa Esl