Kertes-M KFT

Condition: used, mileage: 347,530 km, power: 300 kW (407.89 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 8,500 kg, maximum load weight: 17,500 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,900 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, storage location, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, Telligent gearshift, manual 16-speed transmission, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, differential lock, fog lights, work lights, rotating beacon, storage compartment, leaf spring suspension, trailer hitch with air and light connections, low-noise G1, U-protection, side aluminum fender, sunroof, green environmental badge. Dcjdpfxjzzfc Ds Agtsl Wheelbase: 3900 mm, 8t front axle, H7 13t rear axle, bevel gear 233, disc brake with full protection on the front axle, drum brake on the rear axle, Telligent braking system with ABS and ASR, ABS can be switched off, steel bumper, stabilizer bar on the rear axle, Telligent gearshift II, reinforced clutch, parameterizable special module (PSM), pre-installation for toll collection, distributor cockpit, construction site filter, fuel tank capacity: 400l, protection plate under the radiator and engine, On-Board Diagnosis 2, Driver Pack Standard, auxiliary drive with gearbox MB 131-2c. Chassis number: WDB9321431L660923 ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 1,001 km, first registration: 01/2013, empty load weight: 115 kg, color: red, driver cabin: other, gearing type: other, Year of construction: 2013, load capacity: 300 kg, Equipment: crane, Vehicle location: Bovenden. Dsdpfxjzzfcws Agtscl Complete, including Kinshofer rotating head and upper mount! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 2008, gearing type: other, first registration: 01/2008, color: orange, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, two-part loading ramps, hydraulic ramps. Djdpezzfcqofx Agtjcl Ramp length approx. 4000mm! Dismantled from a Mueller Mitteltal T 3 Kompakt 30.0. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 2005, gearing type: other, first registration: 01/2005, color: orange, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, with mechanical ramps. Dismantling of a Goldhofer TU3-24/80! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Djdpfxszzfcke Agtocl

Condition: used, Year of construction: 2016, gearing type: other, first registration: 01/2016, color: red, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden DC = 135 kN Dcedpfx Ajzzfcdogtjl S = 1000 kg V = 90 kN ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, Komatsu WA470 Wheel Loader Bucket – Heavy-Duty, Custom-Made We manufacture heavy-duty loader buckets for Komatsu WA470 wheel loaders, designed for quarrying, mining, construction, aggregate handling, and other demanding loading applications. Each Komatsu WA470 bucket can be customized according to the required capacity, width, material density, working conditions, and machine configuration. Our production range includes general-purpose buckets, heavy-duty buckets, rock buckets, high-tip buckets, light-material buckets, and other special-purpose wheel loader attachments. High-strength structural steel and wear-resistant steel are used according to the application. Reinforcement plates, cutting edges, side cutters, wear strips, and GET systems can be configured based on customer requirements. You can request a product video to see the materials, steel quality, reinforcement details, and manufacturing workmanship used in the bucket. Dsdjzzfb Tspfx Agtscl Please contact us for pricing, technical specifications, production time, and worldwide delivery options. Keywords: Komatsu WA470 bucket, Komatsu WA470 loader bucket, WA470 rock bucket, WA470 heavy-duty bucket, Komatsu wheel loader attachment, mining bucket, quarry bucket, loader rock bucket, custom loader bucket, reinforced bucket, wear-resistant steel bucket, heavy equipment attachment, wheel loader spare parts, construction machinery bucket, quarry equipment, mining equipment, custom bucket manufacturer.

Condition: used, Year of construction: 2013, x-travel 1020 mm y-travel 610 mm Dcedpfxezzfb Hs Agtel z-travel 610 mm control Heidenhain iTNC530

Condition: used, Year of construction: 2007, turning diameter 200 mm turning length 393 mm control Siemens 810D weight of the machine ca. 3200 kg Dcedpfx Agjzzfbyotsl

Condition: used, Year of construction: 2004, x-travel 1020 mm y-travel 510 mm z-travel 500 mm Dedszzfbtepfx Agtocl control Heidenhain iTNC530 weight of the machine ca. 4700 kg

Condition: used, Year of construction: 2015, x-travel 1020 mm y-travel 610 mm Dodpozzfbmefx Agtjcl z-travel 610 mm control Heidenhain iTNC530 weight of the machine ca. 7390 kg

Condition: new, ### Hitachi ZX210 / ZX250 Long Reach Boom-Arm Set – Custom Manufacturing We manufacture long reach boom and arm sets for Hitachi ZX210 and ZX250 excavators, designed according to the required working depth, reach, bucket capacity, and operating conditions. Dcjdpfxszzfbgj Agtjl Our production range includes long reach boom-arm systems for various excavator brands and models. Each set can be supplied with compatible pins, bushings, hydraulic cylinders, hydraulic lines, linkage components, and a suitable digging bucket, depending on the customer’s requirements. If you are also looking for a complete excavator, we can research suitable new or used machines available in the Turkish market and offer the machine together with the long reach conversion. Please contact us for detailed technical information, available configurations, pricing, and delivery time.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, power: 4 kW (5.44 HP), tool diameter: 50 mm, spindle mount: MK 5, height adjustment type: electric, rotational speed (max.): 2,500 rpm, rotational speed (min.): 28 rpm, total width: 1,145 mm, total length: 3,100 mm, total height: 3,390 mm, table width: 986 mm, table length: 1,820 mm, overall weight: 4,200 kg, Equipment: documentation/manual, Morse 5 taper in the spindle, max. drilling capacity in steel Ø 50 mm, arm length 1250 mm, base clamping surface 1820 x 986 mm, max. Ø boring capacity in steel – without guide: 120 mm, with guide: 200 mm, spindle stroke: 310 mm, vertical arm travel 750 mm, spindle speed: 16 steps, range: 28-2500 rpm, feed rate 0.05 - 2 mm/min, 16 steps, spindle motor power at 1430 rpm: 4 kW, total power consumption 6 kVA, machine dimensions L x W x H: 3100 x 1145 x 3390 mm, machine weight 4200 kg, the machine can be fully tested in our warehouse in Přerov upon agreement. Dodpszzfbajfx Agtjcl

Condition: used, mileage: 6,746 km, gearing type: automatic, fuel type: electric, color: red, overall weight: 3,140 kg, empty load weight: 2,360 kg, maximum load weight: 1,500 kg, lifting height: 3,010 mm, tire size: 18X7-8, number of seats: 1, first registration: 11/2015, emission class: none, suspension: other, Year of construction: 2015, operating hours: 6,746 h, total length: 2,580 mm, driver cabin: other, construction height: 2,060 mm, fuel: electricity, load capacity: 1,500 kg, The Toyota 7FBEST 15 electric three-wheel forklift is a reliable used forklift, ideal for use in industrial environments. It was first registered in November 2015 and has a running time of 6,746 operating hours. Equipped with an electric motor and an automatic transmission, it offers an environmentally friendly and energy-efficient solution for lifting and transport tasks. This forklift features a red metallic paint finish and has a compact design with dimensions of 2,055 mm in height, 990 mm in width, and 2,580 mm in length. The permissible total weight is 3,140 kg, making the forklift suitable for a wide range of lifting tasks. Dcjdpezzfavjfx Agtel The Toyota 7FBEST 15 is a used model with one previous owner, has been properly maintained, and is in operational condition. The unit can be inspected in Rohrbach from Monday to Saturday without prior appointment. Sale is only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale are subject to change.

Condition: used, Year of construction: 2015, operating hours: 3,716 h, load capacity: 1,600 kg, lifting height: 220 mm, fuel type: electric, construction height: 1,250 mm, gearing type: automatic, overall weight: 430 kg, empty load weight: 289 kg, total length: 1,660 mm, color: silver, mileage: 3,716 km, first registration: 09/2015, suspension: other, number of seats: 1, driver cabin: other, wheelbase: 1,304 mm, emission class: none, fuel: electricity, The Still EXU 16 is a reliable and economical solution for daily material transport and offers exactly the features that are crucial in a modern warehouse operation: efficiency, maneuverability, and robust technology. Thanks to its electric drive, the device operates quietly and emission-free, making it ideal for demanding work environments where cleanliness and noise reduction play an important role. Dcsdpfx Aezzfa Asgtol The automatic transmission ensures particularly comfortable and intuitive driving, making the forklift easy to operate and allowing work processes to be carried out without interruption. Especially in daily use, with frequent transport movements, the strength of this model is evident through its precise control and safe handling. With a lifting height of 215 mm, it is optimally designed for fast and efficient pallet transport and helps to significantly speed up processes. Its compact design, with a length of 1,660 mm and a width of only 720 mm, enables confident maneuvering even in narrow warehouse areas. The wheelbase of 1,304 mm also ensures stable and smooth driving, even with intensive use. The 3,716 operating hours demonstrate solid and continuous use and show that this device was designed for practical everyday use. With initial registration in September 2015, this is a proven and well-developed model that has demonstrated its value in practice. This forklift therefore represents a cost-effective investment that optimizes your internal processes, reduces operating costs, and ensures a smooth material flow. With the Still EXU 16, you are choosing a powerful work device that combines efficiency and reliability in a compelling way. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 2008, operating hours: 990 h, fuel type: electric, color: blue, Empty weight: 6.908 kg Dimensions (LxBxH): 653 x 150 x 198 cm - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: Z40N08-509 - Operating hours: 990 - Drive type: Electric - Working height [mm]: 14320 - Platform height [mm]: 12320 - Platform capacity [kg]: 227 - Movement: Solid rubber tires - Options: Half cabin, Non-marking tires - Transport dimensions: 6530mm x 1500mm x 1980mm (l x w x h) - Transport weight [kg]: 6908kg - Transport packages [pcs.]: 1 Djdpozzfapsfx Agtecl Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2011, with new infeed roller Machine in operation used in top condition low mileage cleaned functionally tested partially refurbished Manufacturer: Felder Type: D 951 Year of manufacture: 2011 Machine No.: 431.01.365.11 GS-tested CE type-tested GS-tested for wood dust Segmented pressure beam Rubber infeed roller Dsdpfxszzface Agtscl Rubber outfeed roller Feed rate infinitely adjustable Feed rate m/min: 4 - 16 Number of knives: 4 automatic motor brake Digital display for planing height electric height adjustment with tip fine adjustment Sound insulation Motor kW: 5.5 Planing width approx. mm: 500 Planing height approx. mm: 250 Dust extraction connection mm: 140 Space requirement approx. L x W x H mm: 100x100x1100 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: new, table length 1000 mm table width 1000 mm table height 200 mm bore 28 mm weight 400 kg Special item - Material thickness varies; can only be clamped with bolts 280536 or 280532. Not compatible with quick-release bolts Features: Dedpfezzd U Sox Agtocl - 4 legs - Standard configuration 650 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Side panels made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 28 mm - Holes arranged in a diagonal grid on the surface - Corners, edges, and holes are rounded - Side panel height: 200 mm - Holes in the side panel arranged in a diagonal grid - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise setups

Condition: used, Year of construction: 2000, table diameter 800 mm table load 1100 Kg swivelling range 360 Grad connected load frequency 400 V weight 3,5 t Dimensions (LxWxH) 2,8 x 1,2 x 2,4 m Dcsdpfjzzd Uxox Agtol Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 - System without control cabinet

Condition: used, Year of construction: 2000, table diameter 800 mm table load 1100 Kg swivelling range 360 Grad connected load frequency 400 V weight 3,5 t Dimensions (LxWxH) 2,8 x 1,2 x 2,4 m Dcjdpszzd Tujfx Agtol Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 - System without control cabinet

Condition: used, Year of construction: 1998, grinding length 600 mm Dcodpfozzd Thsx Agtel grinding width 400 mm workpiece height 525 mm table surface area 960 x 400 mm dimensions of grinding wheel 350 mm 600 x 400 mm grinding spindle speed 3000 U/min table load capacity 1100 kp total power requirement 8,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,4 x 1,9 x 2,1 m Surface grinding machine - Magnetic chuck - Coolant system with filter

Year of construction: 2017, condition: excellent (used), functionality: fully functional, MACHINE FOR THE PRODUCTION OF ROLL BAGS, AMUTEC TSA ROLLER 1380 Minimum/maximum material width: 300/1360 mm Minimum bag length: 50 mm Minimum/maximum thickness: 2×10 / 4×75 μm Minimum/maximum width of finished rolls: 100/420 mm Maximum diameter of finished rolls: 120 mm Folding triangles Conveyor belt Photocell for printed materials Control panel with touchscreen Labeling machine Dodpozzd S Rsfx Agtecl Year: 2017

Condition: excellent (used), 4-axis machining center Dodpfx Agjzzd S Djtecl work area: 3200 x 1350 mm automatic tool changer

Condition: used, Year of construction: 1989, functionality: fully functional, MONTHLY OFFER: This machine needs to be sold!!! Dcodjzzd Swjpfx Agtjl Heidelberg GTO 52-1 Colors: 1 Year: 1989 Dampening system: Kompac Maximum format: 520x360 mm (20x14 inches) Current status: In stock Impressions: 39 million Availability: Immediate Location: Italy SPECIAL PRICE (for quick confirmation): €3,000 (Loaded)

Condition: like new (used), fuel type: diesel, rotational speed (max.): 1,500 rpm, motor manufacturer: CUMMINS, Used, open-frame CUMMINS C400 D5 skid-mounted diesel generator, manufactured in 2008. Le Roy-Somer alternator. Power output: 400 kVA. 220/380/400 volts, 50 Hz, 1500 rpm. Equipped with a tropicalized, engine-driven, water-cooled radiator. Very few operating hours: 1435, with 100-hour service intervals. Emergency backup generator set, very well maintained and in excellent condition. Control panel and day tank integrated. Can be viewed and inspected at our warehouse. Includes: engine and alternator mounted on a frame, complete control panel, and silencer. Dcodpfx Agozzd Sketol Ready for immediate shipment.

Condition: new, Year of construction: 2026, faceplate diameter 1600 mm swing diameter 2000 mm Dcjdpfxozzd R Tj Agtol turning height 1600 mm control Fanuc 0i-D stroke of vertical slide 1000 mm tool holder 1 distance face plate/tool carrier 1065- 1865 mm vertical adjustment of the crossrail 800 mm workpiece weight 10 t faceplate turning speed range -stepless- 1 - 250 U/min feeds mm/min rapid traverse 10/12 m/min horizontal adjustment of slide -200 - +1125 mm adjustment speed of cross-rail 300 mm/min milling spindle - taper SK 50 KVA weight of the machine ca. 28,5 t This machine is a new machine with (C) or without milling spindle. It will be sold with full service and warranty by Wirths GmbH (Price without live tooling). Control: Fanuc 0i-D. Machine has safety guard and 12/18 (C) position ATC.