FMT-Fertigungstechnik e. K.

Condition: used, Year of construction: 2004, clamping force: 200 kN, displacement volume: 763 cm³, injection pressure: 1,905 bar, overall weight: 13,500 kg, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Kwjdpfjylz Apex Ahwju

Condition: used, Year of construction: 2003, clamping force: 150 kN, displacement volume: 399 cm³, injection pressure: 1,598 bar, overall weight: 6,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request Kjdpoylz Aiofx Ahwewu terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2012, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, load hours: 55,400 h, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request Kwedpfx Ahoylpy Ajwsu terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2012, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, drive type: hybried, load hours: 55,800 h, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) Kwjdpfsylpyvsx Ahwou delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2004, functionality: limited functionality, machine/vehicle number: 51056, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 154 cm³, injection weight: 138 g, mold height (min.): 250 mm, ejector stroke: 100 mm, opening stroke: 450 mm, plate width: 670 mm, plate height: 600 mm, overall weight: 5,300 kg, heating capacity: 9.2 kW (12.51 HP), power: 27.5 kW (37.39 HP), The machine was in running production until the end of 2024, after which it was disconnected from the power supply and has since been stored in an emptied production hall. It can be purchased and collected at short notice, as the hall needs to be cleared quickly. The nozzle head is currently dismantled—it's available and can be reassembled. The display has been removed—it is present and can be reinstalled. Kwsdpfx Asyllqkjhwou

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 61003771, clamping force: 1,100 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 275 cm³, injection pressure: 1,878 bar, injection weight: 250 g, mold height (min.): 300 mm, ejector force: 22 N, ejector stroke: 150 mm, opening stroke: 900 mm, plate length: 745 mm, plate width: 770 mm, installation height: 600 mm, total length: 4,480 mm, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,000 kg, heating capacity: 13 kW (17.68 HP), pump power: 18,500 W, Krauss Maffei injection moulding machine 100t clamping force – used Kodpfx Aeyllk Djhwewu In continuous production until the end of 2024 – currently disconnected from power Available at short notice – production hall is being cleared

Condition: ready for operation (used), Year of construction: 2003, clamping force: 1,250 kN, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,000 kg, product length (max.): 4,400 mm, Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details. • Opening force: 35 / 28 kN • Tie bar spacing (H × V): 470 × 470 mm • Mould installation height min.: 300 mm • Opening stroke: 900 mm • Ejector stroke: 150 mm • Ejector force: 22 / 10 kN • Injection unit: SP 520 Ksdpfeylkxajx Ahwowu • Screw diameter options: 35 / 40 / 45 mm • Shot volume: approx. 156 / 204 / 258 cm³ • Injection pressure: up to approx. 1800+ bar (depending on screw) • Screw speed: approx. 391 / 489 rpm • Plasticizing rate (PS): approx. 22–41 g/s (depending on screw) • Pump motor power: 18.5 kW • Installed heating capacity: 13 kW • Oil filling quantity: 345 l • Max. mould weight: 1485 kg • Power supply: 3 phases • Operating voltage: 400 V • Frequency: 50 Hz Additional equipment • Cooler (included)

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Kodpfeylkk Aox Ahwjwu Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm Kodpfsylkkpex Ahwjwu ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Kwodpeylkkiefx Ahwju Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Ksdoylkkcspfx Ahwowu Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with side-mounted Arburg Multilift robot 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Kjdjylki Sjpfx Ahwewu Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 2011 Injection Unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosage volume: 392 cc Clamping Unit: Clamping force: 200 t Kjdpsylkixsfx Ahwewu Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: electric Clamping system: toggle Control: SELOGICA - touchscreen Additional equipment: Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Hot runner control x 12 Injection unit hardened - bimetallic Main machine motor - servo motor driven by inverter - energy-saving The injection unit is driven by a servo motor controlled by an inverter Machine with compressed nitrogen cylinder/battery (additional charge for high-speed operation) Central lubrication Parallel movements Arburg Multilift Select 6 kg traverse robot Year of manufacture: 03/2011 4-axis robot: 3 axes driven by servo motors (electric); C axis - pneumatic Travel ranges on axes: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt and safety housing Purchase of robot and conveyor belt possible at extra cost Dimensions: Weight: 8700 kg Length/width/height: 5.58x1.71x2.21 m All offered machines are started up and checked by our service engineers before sale. A video of the technical inspections of the selected machine is available on request, or you can attend live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 Kedsylkh Uspfx Ahwowu 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production Line with Geiger Robot Year of manufacture: 2012 Injection unit: Screw diameter: 35 mm Injection weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 cc Clamping unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Platen dimensions: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Control for hot runner systems x 12 Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast operation) Parallel movements Screw diameter in vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg conveyor belt and sorting flap Original Weber rotary table, highly precise – electric drive Kedpfxsylkhus Ahwjwu Purchase of the rotary table and robot for an additional charge Dimensions: Weight: 8,140 kg Length/Width/Height: 4.81 x 1.84 x 3.45 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 2011 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2,000 bar Dosage volume: 201 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Core pull control Control with 8 hot runner zones Injection unit hardened - bimetallic Main machine motor - servomotor driven by inverter - energy saving Injection unit driven by servomotor, control via inverter Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation) Central lubrication Parallel movements Priamus sensor - tool pressure regulation Ksdpeylkhhefx Ahwswu Dimensions: Weight: 6,010 kg Length/Width/Height: 4.67x1.56x2.21 m All offered machines are started by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 2011 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cc Clamping unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping mechanism: toggle lever Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the fixed platen side Air valve x 3 on the moving platen side Hydraulic core pull x 1 on the fixed platen side Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy-saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation) Central lubrication Parallel movements Automatic mold height adjustment Kwjdpfeylkhbsx Ahwou Dimensions: Weight: 6550 kg Length/Width/Height: 4.67x1.56x2.21 m All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Arburg 470C 1500-400 Year of manufacture: July 2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Type distance: 470 x 470 mm Clamping platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Core pull control Injection unit hardened - bimetal Screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pumps/Motor: 18.5 kW Heating power: 9.4 kW Ksdsylkgwopfx Ahwjwu Total power: 27.9 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2009, Arburg 470C 1500-400 Year of manufacture: July 2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Type distance: 470 x 470 mm Clamping platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Core pull control Injection unit hardened - bimetal Screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pumps/Motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request Kedpfx Aheylkgkowjwu

Condition: excellent (used), Year of construction: 2008, Arburg 470C 1500-400 with the Wittmann W711 robot Year of construction: 2008 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Metering volume: 254 ccm Clamping unit: Clamping force: 150 t Distance between tie bars: 470x470 mm Size of the clamping platens: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Kwedsylkgdjpfx Ahweu Additional equipment: Euromap 67 Robot interface Air valve x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Robot Wittmann W711 Year of construction: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 4900 kg Length/width/height: 4.44x1.63x2.09 m Drive: Pump/motor: 18.5 kW Heating output: 9.7 kW Total output: 28.2 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Arburg 470C 1500-675 Year of manufacture: 2004 Injection unit: Screw diameter: 60 mm Injection weight: 427 g Injection pressure: 1440 bar Metering volume: 508 ccm Clamping unit: clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Kwjdpfjylkfysx Ahweu Additional equipment: Euromap 12 Robot interface Core pull control Injection unit hardened - bimetal Parallel movements Dimensions: Weight: 4660 kg Length/width/height: 5.00x1.93x2.22 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2005, Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of manufacture: 2005 Kodsylkftjpfx Ahwjwu injection unit: screw diameter: 25 mm injection weight: 49 g Injection pressure: 2500 bar Metering volume: 54 ccm Clamping unit : clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: 2K machine Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Parallel movements The vertical injection unit - screw diameter fi 25 mm (49 g/hp) It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5700 kg Drive: Pumps/motor: 30 kW Heating power: 2 x 9,4 kW Total power: 48,8 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2006, Arburg 470C 1500-400 with robot Wittmann W721 Kedpfx Ahoylkfmowowu Year of manufacture: 12.2006 Injection unit: Screw diameter: 40 mm injection weight: 184 g Injection pressure: 2000 bar Metering volume: 201 ccm Clamping unit: clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - bimetal Built-in conveyor belt and sorting flap Robot Wittmann W721 Year of manufacture: 2006 4-axis robot: 3 axes are driven by servo motors (electric); axis C - pneumatic Travels in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot for an additional charge Dimensions: Weight: 4900 kg Length/width/height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating power: 10,2 kW Total power: 28,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2002, Arburg 420C 1300-675 with the sprue picker Star Year of manufacture: 2002 injection unit: Screw diameter: 50 mm injection weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: clamping force: 130 t tie bar distance: 420x420 mm size of clamping platens: 605x605 mm ejector: hydraulic clamping unit: hydraulic Kedpfsylkfgjx Ahwowu Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Covers from the operator side open automatically Dimensions: Weight: 4330 kg Length/width/height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg 520S 1300-800 / machine in very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 50 mm Kodsylkdiopfx Ahwjwu injection weight: 359 g Injection pressure: 2000 bar Metering volume: 392 ccm Clamping unit: clamping force: 130 t tie bar distance: 520x520 mm size of clamping platens: 695x695 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air valve x 2 injection unit hardened - bimetal The machine was regularly serviced by the authorized service Arburg in Germany Dimensions: Weight: 6450 kg Length/width/height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request