WEYRAUCH oHG

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, L & Z Lathe / Bickenbach LE-20-10-S incl. 3-axis digital display -Very well-maintained, original condition from an educational institution -CE marking -Year of manufacture 2008 -Three-axis digital display -Turning diameter 420 mm -Turning diameter over the carriage 250 mm -Turning diameter in the crotch 580 mm -Turning length 1000 mm -Spindle speed range (gearbox) 20 - 2000 rpm -Spindle bore 58 mm -Tailstock taper MK 4 / quill travel 130 mm -Röhm 3-jaw chuck 250 mm & quick-change jaws -Fixed steady rest -Multifix base holder & 3x inserts -Coolant system -Folding protective device for tool holder -Electric chuck guard -Foot brake -Swivel machine lamp -Follower (Röhm) -Machine feet -Bed stop -Chip guard -Emergency stop Ijdpszvpxxjfx Afkstk -Operating tool Dimensions: L x W x H 2.1 x 0.8 x 1.7 meters / Weight 1600 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning diameter over cross slide: 225 mm, spindle bore: 62 mm, turning diameter: 400 mm, turning length: 1,000 mm, total length: 2,100 mm, total width: 1,080 mm, total height: 1,520 mm, overall weight: 1,800 kg, This machine, similar to the WEILER Commodor, is still in working order and can be inspected at the factory in good condition. Itodozvlitepfx Afkek Attached is a PDF with technical data.

Condition: used, functionality: fully functional, machine/vehicle number: 33117, total length: 10,000 mm, overall weight: 22,000 kg, High-performance lathe with guide and draw spindle Itodpjzvgxcjfx Afkek Manufacturer: Meuser Model: M Vi 625 x 8000 mm Control: conventional Max. turning length: 8000 mm Faceplate diameter: 1250 mm Motor power: 30 HP Feeds and speeds: see image Rapid traverse motor Voltage: 380 Volt / 50 Hz three-phase Ortlinghaus coupling with electromagnetic brake Wet machining system with coolant pump Work light Operating manual Further technical data: see images Hardened guides

Condition: used, Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 87 mm, turning diameter: 380 mm, turning length: 1,000 mm, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, travel distance X-axis: 190 mm, travel distance Z-axis: 1,090 mm, VICTOR VTURN-26 / 110 – LIVE TOOLING - Manufacturer: Victor - Model: Vturn-26 / 110 - Year: 1998 - Machine Type: CNC Turning Center with Live Tooling - Number of Axes: 3 (X / Z / C) - C-Axis: Included Ijdpfxszvfrus Afkjtk - Live Tooling: 8 Driven Tools - Bar Feeder: Included - X-Axis Travel: Approx. 190 mm - Z-Axis Travel: Approx. 1,090 mm - Maximum Turning Length: Approx. 1,000–1,100 mm - Swing Over Bed: Approx. 520 mm - Maximum Turning Diameter: Approx. 380 mm - Spindle Speed: Up to 3,500 rpm - Spindle Nose: A2-8 - Bar Capacity: Approx. 75 mm - Spindle Bore: Approx. 87 mm - Spindle Motor Power: Approx. 18.5 kW - Turret: Live Tool Turret - Machine Dimensions: Approx. 4,400 × 1,700 × 1,900 mm - Machine Weight: Approx. 6,000 kg - Bar Feeder: Included

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1500 mm center height measured in bed: 250 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm longitudinal feeds:: 0,08 - 3,26 mm/U Iodpfxezu Rr De Afkstk cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 3,05 t dimension machine approx.LxWxH: 2,6 x 1,1 x 1,3 m

Condition: good (used), Year of construction: 1976, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 65 mm, turning diameter: 480 mm, turning length: 1,000 mm, total length: 3,400 mm, total width: 1,000 mm, total height: 1,500 mm, spindle speed (max.): 2,240 rpm, type of input current: AC, overall weight: 3,500 kg, For sale is an L+Z lathe manufactured by VDF Boehringer. The machine is in good condition and can be inspected and tested upon request. Manufacturer: VDF Boehringer Göppingen Type: D 480 Year of manufacture: 1976 Swinging diameter over bed: 480 mm Swinging diameter over cross slide: 280 mm Turning length: 1000 mm Power feed Spindle bore: 65 mm Maximum speed: 2240 rpm Bed width: 310 mm Dimensions (L x W x H): 3400 x 1000 x 1500 mm Isdozu I A Tspfx Afketk Weight: approx. 3 tons Includes various Multifix tool holders and accessories. Free loading onto a truck.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MC 0120, turning diameter over cross slide: 270 mm, spindle bore: 70 mm, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, turning diameter over top slide: 270 mm, center height: 230 mm, turning length: 1,500 mm, feed length X-axis: 1,500 mm, total length: 3,045 mm, total width: 1,200 mm, total height: 1,450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 2,700 kg, Colchester Mascot Gap Bed Lathe Model: Mascot 2000 Vari Speed Swing Over Bed: 460mm Swing In Gap: 730 x 216mm Distance Between Centres: 1500mm Spindle Speeds: 60-2000 RPM (variable) Spindle Bore: 76mm Motor: 11KW Machine With: 300mm 3 Jaw Chuck 600mm Face Plate Digital Readout Itedjzux Eljpfx Afkek Quick Change Toolpost with Holders Dimensions: 3045 x 1200 x 1450mm high Weight: 2700 Kgs

Condition: ready for operation (used), Year of construction: 1974, Available immediately ex-works: L & Z lathe, Okuma Center height 220 mm Diameter over bed 440 mm Diameter over cross slide 300 mm Iedpszukfwefx Afkstk Spindle bore 55 mm Drive power 5.5 kW Chuck Tool holder Weight 2400 kg Price: EUR 1,500.00 plus VAT, ex-works

Condition: used, Year of construction: 1954, 530 mm Itjdpfjztfygjx Afksk serial number 13436 weight of the machine ca. 1,4 t

Condition: used, Year of construction: 1971, digital ja multifix ja ja documentation ja bed bridge ja good condition ja centre distance 1800 mm 530mm serial number 0556 Itodpeztfxcefx Afkek hollow 60 mm weight 3,3 t

Condition: used, Year of construction: 1980, centre distance 1500 mm 3 Itedpfxjztfw Se Afkek weight 3 t ja

Condition: used, Year of construction: 1980, centre distance 1500 mm 210 serial number 1289 multifix ja Itsdpfx Afsztfu Reksk ja weight 1,45 t

Condition: ready for operation (used), WEISSER HEILBRONN - Junior - Lathe Itsdpoztbhmefx Afkok -Center height approx. 220mm -Turning diameter over bed 440mm -Distance between centers approx. 1000mm -Spindle bore approx. 50mm -Spindle speeds 40-2000 RPM -Automatic longitudinal / cross feed -Threading / Metric / Inch etc. -Incl. HEIDENHAIN ND 780 / 3-axis digital read-out -FORKARDT F250 3-jaw chuck -Multifix with inserts -Electric chuck guard -L&Z spindle cover -Documentation Dimensions: L x W x H 2.6 x 1.3 x 1.9 meters / Weight 1700 kg Errors and omissions excepted.

Condition: new, Year of construction: 2026, 3-jaw chuck 200 mm Max. turning diameter over bed 410 mm Turning diameter over cross slide 255 mm Turning diameter in bridge recess 580 mm Center distance 1000 mm Center height 205 mm Top slide travel 140 mm (accurate 0.02 mm) Cross travel 210 mm (accurate 0.02 mm) Longitudinal travel 750 mm (accurate 0.2 mm) Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MK6 Lathe post dimensions 100 × 100 × 32 mm Max. tool dimensions 20 × 20 mm Spindle speeds: 16 ranges, 45 – 1800 rpm Spindle speed range: 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 rpm Metric thread (42) 0.2 – 14 mm/rev Inch thread (42) 2 – 72 TPI Modular thread (18) 0.3 – 3.5 mm D.P. thread (21) 8 – 44 DP Longitudinal feed range (17) 0.05 – 1.7 mm/rev Cross feed range (17) 0.025 – 0.85 mm/rev. Tailstock quill diameter 50 mm Tailstock quill stroke 120 mm (accurate 0.02 mm) Tailstock quill taper MK4 Main motor power 2.2 / 3.3 kW Coolant pump power 90 W Isdszr I D Sjpfx Afkotk Dimensions (L × W × H) 2050 × 900 × 1650 mm Weight 1600 kg A larger model (410 x 1500 mm) is available for €6,800 net.

Condition: used, Year of construction: 1996, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 434 mm Control Siemens Sinumerik 840D total power requirement 54 kW weight of the machine ca. 10 t dimensions of the machine ca. 6000x2800 mm Spindle speed (max): approx. 0–4500 rpm Spindle speed (max): approx. 0–4500 rpm Spindle bore: approx. 65 mm Spindle taper: mostly DIN 55026 A6 / ISO taper X-axis travel: approx. 220 mm Z-axis travel: approx. 950 mm Feed rate: approx. 25 m/min Tools & equipment Tool turret: usually 2 turrets with ~12 tool positions Iedezrzxispfx Afketk Powered tools: possible depending on equipment Tailstock: optional, often NC-controlled (SK30)

Condition: used, Year of construction: 2002, turning diameter 290 mm turning length 850 mm swing diameter over bed slide 600 mm Control Siemens SINUMERIK 840D total power requirement 58 kW Automation: Portal with 2 belts Number of turrets: 3 Spindle: Yes # Stepping wheel: No X-axis (transverse) travel: approx. 220 mm Z-axis (longitudinal) travel: approx. 950 mm Feed rate: approx. 25 m/min (x/y) Ijdpfx Afjzrzxcsketk Rapid traverse: approx. 25 m/min

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the Chinese company Sumore, model SP2114. I rate the condition of the machine as very good. It has high rigidity and accuracy. The machine is connected and ready for operation. Itedozqt Dzopfx Afkek We provide on-site machine loading. Spindle bore: 58 mm Lathe chuck: 250 mm Turning length: 1500 mm Turning diameter over the bed: 460 mm Turning diameter over the carriage: 260 mm Tailstock spindle: MK 4 Minimum speed: 25 rpm Maximum speed: 2000 rpm 12 spindle speeds Steady rest: fixed and traveling

Condition: used, Year of construction: 2026, CORMAK 400 metal lathes is a new, improved version of the popular metal processing lathes. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. They are suitable for production plants, workshops and tool shops. They are perfect for unit and small lot production. NEW, IMPROVED MODEL !!! high-quality and reinforced spindle bearing system new guards system compliant with CE standards the latest model of digital axis reading reinforced and modernized lathe base with drawers for tools and an extendable chip tray Characteristics of the machine REINFORCED, RIBBED SURFACE OF THE LATHE'S BED PROVIDES MAXIMUM REDUCTION OF VIBRATION, ADDITIONALLY PRECISE GRINDED, HARDENED BED DIGITAL READOUT OF THE AXIS IN STANDARD EQUIPMENT LARGE SPINDLE BORE PROVIDES OPTIMUM PERFORMANCE 52 mm THE APPROPRIATE BED WIDTH ENSURES STABLE AND PRECISE WORKING CONDITIONS MACHINE EQUIPPED WITH HIGH-QUALITY AND HARDENED SPINDLE BEARING SYSTEM EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND EQUIPMENT WITH A ROLLER AND A DRAFT BOLT HARDENED WHEELS IN THE SPINDLE GEAR ADJUSTABLE CLUTCH OVERLOADS ON THE PULL SHAFT POSSIBILITY TO MACHINE THE FULL RANGE OF THREADS WITHOUT REPLACING THE WHEELS IN THE GUITAR FEED CHOICE LOCK: THROUGH SCREW OR SHAFT THE REMOVABLE BRIDGE ENABLES THE WORKING OF ELEMENTS WITH AN INCREASED DIAMETER RETRACTABLE CHIP DRAWER AND TOOL DRAWERS FOR BETTER AND EFFICIENT WORK Technical data MAXIMUM TURNING DIAMETER 400 mm Iedpfx Afozp E A Tjkotk MAXIMUM TURNING DIAMETER OVER THE BED 250 mm MAXIMUM TURNING DIAMETER IN THE SELECTION OF THE BRIDGE 520 mm TURNING LENGTH IN DEAD CENTRES 1000 mm BED WIDTH 218 mm SPINDLE END CAMLOCK D5 SPINDLE CONE MK6 SPINDLE BORE 52 mm SPINDLE ROTATION RANGE 65-1810 rpm SPINDLE SPEED NUMBER 16 ranges RANGE OF LONGITUDINAL FEED (40) 0,053 - 1,291 mm RANGE OF TRANSVERSE FEED (40) 0,011-0,276 mm THE MAXIMUM DIMENSION OF THE TOOL 20 mm x 20 mm METRIC THREAD 0,4-7 mm INCH THREAD 4-60 T.P.I. MODULAR THREAD (22) 0,4-3 mm THREAD D. P. (28) 8-84 D. P. TAILSTOCK QUILL DIAMETER 50 mm TAILSTOCK QUILL STROKE 110 mm TAILSTOCK TAPER MT4 ENGINE POWER 2,2 kW PUMP POWER 0,1 kW WEIGHT 640 kg DIMENSIONS 2000x820x1650 mm EQUIPMENT digital readout steady rest follow rest 200 mm 3-jaw chuck 200 mm 4-jaw chuck face plate 280 mm dead center MK4 x 2 reduction sleeve MK6/MK4 keys PLEASE NOTE!!! This machine is a returned item; it has bodywork and paintwork damage but is in working order. NO WARRANTY!!!

Condition: good (used), functionality: fully functional, Universal lathe SUI40/1500. Itjdpfszpgaaex Afkjk

Condition: new, Year of construction: 2026, CORMAK TORNADO 360×1250 VARIO Universal Lathe The CORMAK TORNADO 360×1250 VARIO is a professional conventional lathe designed for precision metalworking in manufacturing facilities, toolrooms, and maintenance workshops. Its robust construction, 1,250 mm distance between centers, powerful 2.4 kW motor, and Camlock D1-5 spindle mounting provide outstanding rigidity, stability, and repeatable machining accuracy, even during demanding cutting operations. Key Advantages of the CORMAK TORNADO 360×1250 VARIO Universal Lathe 1,250 mm distance between centers allows machining of workpieces up to 1,000 mm between the chuck and tailstock center, making it suitable for long shafts and cylindrical components. Hardened and precision-ground 205 mm bed offers excellent wear resistance while effectively minimizing vibration. 52 mm spindle bore enables machining of larger-diameter stock without additional preparation. Camlock D1-5 spindle nose provides quick, secure, and rigid chuck mounting. 2.4 kW motor delivers high torque at low spindle speeds and maintains reliable performance under load. Variable spindle speed (VARIO) from 70–2,000 RPM allows precise adjustment to suit different materials and machining operations. Supports both metric and imperial thread cutting, making the machine highly versatile. Compatible with 16 × 16 mm cutting tools, allowing the use of professional turning tool holders. Rigid Construction for Superior Machining Accuracy The lathe features a heavy-duty cast iron frame designed to minimize vibration during machining. Its substantial weight and wide guideways provide excellent rigidity, while the hardened and precision-ground bed maintains its geometry even under intensive industrial use, ensuring consistently accurate machining and high-quality surface finishes. The spindle is supported by precision bearings and equipped with a Camlock D1-5 spindle nose for rapid chuck changes and maximum rigidity. The 52 mm spindle bore allows larger-diameter materials to pass through the spindle, expanding the machine's machining capabilities. Standard Equipment Machine stand 200 mm 3-jaw chuck with internal and external jaws 200 mm 4-jaw independent chuck with internal and external jaws Set of 7 turning tool holders (16 × 16 mm) Faceplate Thread dial indicator Fixed steady rest Ijdpfxjznt Rpe Afkjtk Follow rest 2-axis digital readout (DRO) Chip tray and tool drawer Coolant system LED work light Technical Specifications Specification Value Swing over bed 360 mm Swing over cross slide 220 mm Distance between centers 1,250 mm Bed width 205 mm Maximum tool size 16 × 16 mm Spindle bore 52 mm Spindle taper / spindle nose MT6 / Camlock D1-5 Spindle speed range 70–2,000 RPM (variable) Metric threads 20 ranges, 0.25–5 mm Imperial threads 25 ranges, 4–60 TPI Longitudinal feeds 15 ranges, 0.05–0.5 mm/rev Cross feeds 15 ranges, 0.02–0.2 mm/rev Compound slide travel 95 mm Cross slide travel 180 mm Tailstock quill diameter 46 mm Tailstock taper MT4 Tailstock quill travel 100 mm Motor power 2.4 kW Power supply 400 V Overall dimensions (L × W × H) 1,930 × 850 × 1,600 mm Weight 600 kg

Condition: new, Year of construction: 2026, CORMAK TORNADO 360×1000 VARIO Universal Lathe The CORMAK TORNADO 360×1000 VARIO is a professional conventional lathe designed for precision metalworking in manufacturing plants, toolrooms, and maintenance workshops. Its rigid construction, 1,000 mm distance between centers, powerful 2.4 kW motor, and Camlock D1-5 spindle mounting ensure excellent rigidity, stability, and repeatable machining performance, even during demanding cutting operations. Key Advantages of the CORMAK TORNADO 360×1000 VARIO Universal Lathe 1,000 mm distance between centers enables machining of long shafts, sleeves, and other extended workpieces. Hardened and precision-ground bed (195 mm wide) provides excellent wear resistance and effectively dampens vibrations. 52 mm spindle bore allows machining of larger-diameter bar stock without prior preparation. Camlock D1-5 spindle nose ensures fast, secure, and rigid chuck mounting. 2.4 kW motor delivers high torque at low spindle speeds and reliable performance under load. Variable spindle speed (VARIO) from 75–2,000 RPM allows precise adjustment for different materials and machining operations. Supports both metric and imperial thread cutting, increasing the machine's versatility. Accommodates 16 × 16 mm cutting tools, making it compatible with professional turning tool holders. Rigid Construction for High Machining Accuracy The lathe is built around a heavy-duty cast iron frame whose substantial weight and wide guideways effectively minimize vibration during machining. The hardened and precision-ground bed maintains its geometry even under intensive use, ensuring consistently high machining accuracy and excellent surface finish. The spindle is mounted on precision bearings and features a Camlock D1-5 spindle nose for quick chuck changes and maximum rigidity. Its 52 mm spindle bore enables machining of larger-diameter materials, expanding the machine's application range. Standard Equipment Machine stand 200 mm 3-jaw chuck with internal and external jaws 200 mm 4-jaw independent chuck with internal and external jaws Set of 7 turning tool holders (16 × 16 mm) Faceplate Thread dial indicator Fixed steady rest Follow rest 2-axis SINO digital readout (DRO) Chip tray and integrated tool drawers Coolant system Itodeznt I Iepfx Afkok LED work light Technical Specifications Specification Value Swing over bed 360 mm Swing over cross slide 225 mm Distance between centers 1,000 mm Bed width 195 mm Maximum tool size 16 × 16 mm Spindle bore 52 mm Spindle taper / spindle nose MT6 / Camlock D1-5 Spindle speed range 75–2,000 RPM (variable) Metric threads 20 ranges, 0.25–5 mm Imperial threads 25 ranges, 4–60 TPI Longitudinal feeds 15 ranges, 0.05–0.5 mm/rev Cross feeds 15 ranges, 0.02–0.2 mm/rev Compound slide travel 95 mm Cross slide travel 180 mm Tailstock quill diameter 32 mm Tailstock taper MT3 Tailstock quill travel 90 mm Motor power 2.4 kW Power supply 400 V Overall dimensions (L × W × H) 1,700 × 850 × 1,600 mm Weight 550 kg

Condition: used, Year of construction: 1970, centre height 120 mm Ijdpfx Aszndt Iofkjtk spindle bore 20 mm copying device ja kW weight of the machine ca. 3 t

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 5V0168, MACHINE SPECIFICATION Height of centres 280mm Swing over bed 554mm Swing over cross slide 370mm Swing in gap 830mm Width in front of faceplate 216mm Bed length between centres 2000mm Spindle speeds: number 3 Spindle speeds: ranges 18-200,55-605, 160-1800rpm Spindle nose mounting Camlock D1-11 Spindle bore 104mm Itsdszna Twopfx Afkok Taper in nose bush No. 5MT Width over bedways 400mm Travel of cross slide 300mm Travel of top slide 175mm Travel of tailstock barrel 178mm Tailstock in tailstock barrel No. 6MT Approx. Weight 3650Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chuck Quick change toolpost and 4-off toolholders Bedstop Lighting Chuck guard Coolant system Rear splashguard

Condition: good (used), functionality: fully functional, For sale is a robust TOS Trenčín SUI 40 guide and lead screw lathe with a center distance of 1,500 mm. This machine comes from an industrial setting and impresses with its massive cast iron construction, high rigidity, and excellent smooth running. The proven SUI series from TOS is one of the most durable conventional lathes in its class and is still valued today in industry, toolmaking, and training workshops for its precision and reliability. The machine is in a well-maintained, used condition. All essential components are present. The machine bed shows a good overall condition; guides and supports appear well-maintained. The mounted three-jaw chuck, four-position tool holder, tailstock, and safety guard are included in the offer. Equipment: ✓ Center distance 1,500 mm ✓ Massive machine bed ✓ Guide and lead screw ✓ 3-jaw chuck ✓ Four-position tool holder Isdpfozmp Tksx Afkstk ✓ Tailstock ✓ Coolant system ✓ Safety guard on the chuck ✓ Emergency stop switch ✓ Industrial version Application areas: Ideally suited for: Mechanical engineering Toolmaking Maintenance Workshops Repair shops Training workshops Single-piece and small-batch production Condition: Used Good overall condition Signs of wear consistent with age Inspection is highly recommended Sale from the current location

Condition: good (used), 1 x lathe from Hamburg 430 --- 1 x lathe from WEIPERT 425 --- 1 x lathe from VDF Itedozmm A Njpfx Afkok