ASYST GmbH

Condition: used, grinding length / mm grinding width / mm workpiece height / mm total power requirement / kW weight of the machine ca. / t Hnsdpfx Ahoxxb Nbo Usw required space / m

Condition: used, Year of construction: 1986, grinding length 600 mm grinding width 300 mm workpiece height 250 mm table surface area 900 x 250 mm Hsdpfx Aexxbzkeh Uonw grinding wheel size ø 300 x 50 x ø 75 mm table speeds 1 - 25 m/min rapid traverse vertical 0,15 m/min total power requirement 4,5 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,14 x 1,85 x 2,12 m Accessories: magnetic plate 600 x 300 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with band filter device

Condition: used, Year of construction: 2014, Okamoto OGM-250UDXB including accessories External and internal cylindrical grinding machine Very good condition! max. swing diameter: 220 mm max. point width: 500 mm max. grinding diameter: 200 mm Max. workpiece weight (between centers): 60 kg Grinding wheel: 305 mm diameter x 25 mm width x 127 mm bore number of revolutions: 2087/2357 rpm Maximum peripheral speed: 33 m/sec Travel: X-axis: 203 mm, Z-axis: 640 mm Headstock swivel range : +/-30 ° Headstock feed speed: 1000 mm/min electric handwheel: 0.001 / 0.01 mm Sparking: 0-10 seconds/strokes Table axis swivel range: +4°/-9° maximum table speed: 50-4000 mm/min Delivery in no time: 7,5 mm Workpiece spindle head: Mounting cone MK3, spindle bore 14 mm, Workpiece spindle head speed (3 stages): 150/250/400 rpm Workpiece spindle head swivel range: +30° / -90° Tailstock quill stroke: 20 mm tailstock mount: MK3 Grinding spindle power: 1,5 kW Workpiece spindle power: 0,4 kW Table drive: 0.4 kW (AC servo motor) Headstock: 0.4 kW (AC servo motor) Internal grinding device: 0,75 kW Power supply: 7 kVA Setup dimensions: 2880 x 1851 x 1640 mm mass: 1900 kg max. point width: 500 mm Hodpfx Aoxw N Tfsh Uenw max. grinding diameter: 200 mm Max. workpiece weight (between centers): 60 kg Grinding wheel: 305 mm diameter x 25 mm width x 127 mm bore number of revolutions: 2087/2357 rpm Maximum peripheral speed: 33 m/sec Travel: X-axis: 203 mm, Z-axis: 640 mm Headstock swivel range : +/-30 ° Headstock feed speed: 1000 mm/min electric handwheel: 0.001 / 0.01 mm Sparking: 0-10 seconds/strokes Table axis swivel range: +4°/-9° maximum table speed: 50-4000 mm/min Delivery in no time: 7,5 mm Workpiece spindle head: Mounting cone MK3, spindle bore 14 mm, Workpiece spindle head speed (3 stages): 150/250/400 rpm Workpiece spindle head swivel range: +30° / -90° Tailstock quill stroke: 20 mm tailstock mount: MK3 Grinding spindle power: 1,5 kW Workpiece spindle power: 0,4 kW Table drive: 0.4 kW (AC servo motor) Headstock: 0.4 kW (AC servo motor) Internal grinding device: 0,75 kW Power supply: 7 kVA Setup dimensions: 2880 x 1851 x 1640 mm mass: 1900 kg max. swing diameter: 220 mm

Condition: good (used), Year of construction: 1979, grinding length: 600 mm, grinding width: 200 mm, CONTROLS .. electronic controls WORKING RANGE SURFACE GRINDING .. grinding length: 600 mm .. grinding width: 200 mm TABLE (SURFACE GRINDING) .. magnetic table: yes MAGNETIC TABLE .. length: 600 mm .. width: 200 mm .. weight: 100 kg SPINDLESTOCK GRINDING SPINDLE .. spindle revolutions (max): 4200 /min GRINDING TOOL .. type of grinding tool: wheel .. diameter (max): 250 mm .. borehole: diameter: 51 mm .. width: 25 mm ELECTRICAL SPECIFICATIONS .. total power consumption: 7.5 kW .. mains voltage: 400 V .. mains frequency: 50 Hz Hedpfexwt A Dex Ah Uenw DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3000 mm .. space requirements -front/back-: 2540 mm .. total height: 1850 mm .. total weight approx.: 2000 kg

Condition: not inspected (used), Jung JHW 5 VA surface grinding machine Hnsdpfxsxwl Tns Ah Uew

Condition: excellent (used), Year of construction: 1987, Grinding length: 500 mm Grinding width: 250 mm Max. workpiece weight: 250 kg Including magnetic chuck Hjdexwl A Ajpfx Ah Usnw Including dressing device FROM DRESS Including complete operating manual

Condition: ready for operation (used), Year of construction: 1991, operating hours: 39,428 h, functionality: fully functional, machine/vehicle number: 1168, grinding length: 600 mm, table length: 600 mm, table width: 200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 230 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 04/12/2025! Bidding obligates the buyer to collect the machine within the scheduled period between 10/12/2025 and 12/12/2025! TECHNICAL DETAILS Longitudinal grinding travel X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 230 mm Work table Clamping surface: 600 x 200 mm Table load: max. 100 kP Distance table surface to grinding spindle center: max. 500 mm Table longitudinal feed (X-axis): 1 – 24 m/min Table cross feed (Z-axis): 2,000 mm/min Grinding wheel dimensions: 250 x 25 x 51 mm Digital axis display: 0.001 mm Grinding head infeed (Y-axis): 2,000 mm/min Hnedjxvp Eljpfx Ah Uew Magnet dimensions: 450 x 220 mm MACHINE DETAILS Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 30 A Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,000 x 2,100 mm Weight: 2,000 kg Operating hours: 39,428 h

Condition: good (used), Year of construction: 1979, Surface grinding machine BRAND FS 10.35, No. 245, year of manufacture 1979, paper belt filter Hnsdpfxsxva Rlo Ah Ujw

Condition: used, Year of construction: 1953, grinding wheel dia. x width ca. 200 x 25 mm magnetic clamping plate ca. 450 x 170 mm cross feed of the table 200 mm revolutions of grinding spindle 3000 U/min Hnsdpfx Ahexu Nw Ej Ujw grinding wheel hole diameter 51 mm weight ca. 1300 kg 0,001 - 0,013 mm grinding length 600 mm Surface grinding machine Includes extractor 1 additional grinding wheel holder Machine was in occasional use until recently

Condition: used, Year of construction: 1995, grinding length 400 mm grinding width 200 mm workpiece height 300 mm table adjustment - longitudinal max. 420 mm table cross movement max. 190 mm distance spindle center to table 90 - 415 mm table speeds 2 - 28 m/min table load max. 150 kg cross feed of table intermittent 3 - 20 mm rapid traverse cross 7 mm/min Hedpfjxu Ntgjx Ah Uonw rapid traverse vertical 180 mm/min grinding wheel size ø 225 x 25 x ø 51 mm total power requirement 7 kW weight of the machine ca. 1,5 t dimensions of machine L x W x H 2,20 x 1,46 x 2,10 m Accessories: magnetic plate 400 x 200 mm, grinding wheel with flange, balancing scale, 1 flange separate, 2 grinding wheels separate, DRO on Y-axis, wet grinding attachment

Condition: used, Year of construction: 1973, Technical details: Hjdpexu Dv Ajfx Ah Ujnw grinding length: 400 mm grinding width: 200 mm workpiece height: 300 mm dimensions of grinding wheel: 275 - 315 mm magnetic plate size: 400 x 200 mm max. table load: 200 kg weight of the machine ca.: 1,6 t dimension machine xH: 1,55 x 1,45 x 2,20 m

Condition: ready for operation (used), additional equipment features: yes, Besturing: Siemens Sinumerik 840 (achteraf ingebouwd) Hnedpfexuwxwsx Ah Uow Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1270 mm Longitudinal travel X-axis (autom.): 610 mm Cross-travel Y-axis (autom.): 1310 mm Travel Z-axis (autom.): 565 mm Dimensions of the table: 1215 x 1250 mm Dimensions magnetic table: 1250 x 500 mm Distance between table -- spindlecentre: 680 mm Spindlespeeds: rpm Motorpower: 15 kW Cooling system: yes

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Model PSG 63 – UAN Year of manufacture 1988 Grinding length 600 mm Grinding width 320 mm Maximum workpiece height 500 mm Table longitudinal travel 750 mm Table cross travel 340 mm Grinding wheel diameter 350 mm Hedpfx Ahsxud Tuj Uonw Grinding wheel width 40 mm Spindle speed 1,500 rpm Rapid vertical traverse 400 mm/min Power 3.7 kW Automatic feed Magnetic chuck Coolant system Weight 2,500 kg Price: €2,500 plus VAT, ex-site

Condition: like new (used), Year of construction: 2012, operating hours: 344 h, functionality: fully functional, grinding length: 850 mm, grinding width: 400 mm, total height: 505 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Base machine Type Linea Iron 6.3 Preparation for magnetic chuck with safety function Magnetic chuck 600 x 300 x 70 mm Paper band filter unit with manual paper unwind Air cooling for hydraulic oil Dressing fixture at the end of the table, incl. space for lateral diamond 2x grinding wheel flanges with manual weights Hedpfx Aoxt Rt Ssh Uenw Machine grinding range: Longitudinal 850 mm. Cross 400 mm including max. B (50 mm) grinding wheel. Height distance table to spindle center 505 mm. Weight 3,500 kg.

Condition: good (used), Year of construction: 2015, Technical Specifications: Hsdpfx Ajxtxmtoh Uenw Year of manufacture: 2015. Fully refurbished for 57,800 euros X-axis: 1000 mm Y-axis: 500 mm Z-axis: 450 mm Table length: 1360 mm Table width: 590 mm Table load: 1050 kg Feed rate X-axis: 26,000 mm/min Feed rate Z-axis: 26,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Dimensions: Length: 4500 mm Width: 2500 mm Height: 2900 mm Weight: 6,100 kg

Condition: used, Year of construction: 1992, Internal item no.: 25086 Surface Grinding Machine Zirsch & Baltrusch Formmaster 6/30 Hnodpfx Ahjxtn R Ij Uow + Magnetic clamping plate 600x300 mm Attention! The grinding spindle is noticeably louder and should probably be replaced in the near future. See video! Technical Data: Maximum grinding area: 650 x 300 mm Electromechanical cross feed: 300 mm Maximum table load: 300 kg Table clamping surface: 650 x 250 mm Maximum distance from table surface to spindle center: 600 mm Grinding wheel dimensions: 400 x 40 mm Travel X: 840 mm / Y: 310 mm Automatic infeed in Z Connected load: 8 kW Installation dimensions (LxWxH): 3500 x 2000 x 2500 mm Weight: approx. 3000 kg

Condition: used, Year of construction: 1995, grinding length: 600 mm, grinding width: 350 mm, controller manufacturer: SIEMENS, controller model: S5 95U, CONTROLS .. SIEMENS S5 95U Hjdextiwpjpfx Ah Ujnw WORKING RANGE SURFACE GRINDING .. grinding length: 600 mm .. grinding width: 350 mm .. distance of axis of horizontal spindle - clamping surface (max.): 525 mm .. workpiece height (max) with largest wheel: 375 mm TABLE (SURFACE GRINDING) .. workpiece load (max): 400 kg MAGNETIC TABLE .. length: 600 mm .. width: 350 mm SPINDLESTOCK GRINDING SPINDLE .. X-axis travel: 660 mm .. Y-axis travel: 350 mm .. Z-axis travel: 385 mm .. drive power: 4.5 kW GRINDING TOOL .. type of grinding tool: wheel .. diameter (max): 300 mm .. borehole: diameter: 76.2 mm .. width: 50 mm AXIS DRIVES .. traverse velocity X (min): 2000 mm/min .. traverse velocity X (max): 28000 mm/min ELECTRICAL SPECIFICATIONS .. total power consumption: 8 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 2100 kg ATTACHMENTS (GRINDING) .. Flange of grinding wheel: yes .. Grinding discs, number: 1 .. balancing attachment: yes .. coolant unit: yes

Condition: good (used), Year of construction: 1980, operating hours: 15,393 h, functionality: fully functional, grinding length: 600 mm, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. Hedpfjxru H Tjx Ah Usnw No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 1,234 h, functionality: fully functional, grinding length: 600 mm, grinding width: 350 mm, Surface grinding machine by Geibel & Hotz - FS 635 SA - Year of manufacture: 2000 - Equipped with a PLC control Hnodpexrgi Tjfx Ah Uow - Grinding area: 600 x 350 mm - Magnetic area: 600 x 350 mm The machine is still in operation and can be made available at short notice by arrangement. Inspection is possible at any time. Collection by the buyer (assistance with loading is possible – forklift available).

Condition: ready for operation (used), Year of construction: 2000, operating hours: 1,234 h, functionality: fully functional, grinding length: 600 mm, grinding width: 350 mm, Surface grinding machine by Geibel & Hotz - Year of manufacture: 2000 - Equipped with PLC control - Grinding area: 600 x 350 mm - Magnetic area: 600 x 350 mm Hnodpexqg Tpsfx Ah Uow The machine is still in operation and can be made available at short notice upon agreement. An inspection is possible at any time. Collection by the buyer (assistance with loading is possible – forklift truck is available).

Condition: excellent (used), Year of construction: 1997, DETAILS PRECISION SURFACE GRINDING MACHINE Manufacturer: JUNG Model: JF 520 Year of manufacture: 1997 Machine weight: 2200 kg Total weight: 2600 kg Location: Haiger Price: €24,000 excl. VAT Hjdpfoxqa I Tjx Ah Uenw Description: Serial no.: 3821, Digital readout, manufacturer Heidenhain, microprocessor control, profile dressing device, manufacturer Diaform, machine lighting, coolant system, magnetic clamping table. Technical Data: Clamping surface (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Max. magnet size mm: 600 x 200 Max. grinding wheel dimensions (mm): 225 x 25 x 51 Distance table/spindle center (mm): 350 (+50) Table longitudinal feed reciprocating (m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Power kW (with creep feed): 2.2 (3.5)

Condition: ready for operation (used), empty load weight: 3,300 kg, additional equipment features: Diamant tools, + afzuiging + koelmelk groep Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Dimensions magnetic table: 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Motorpower: 9 kW Hnedpfoxp Skdox Ah Usw Tension needed: 400V Cooling system: yes

Condition: used, Year of construction: 2021, max. travel distances (transverse x longitudinal) 280 x 600 mm distance spindle /table 500 mm Grinding surface of table 250 x 500 mm Grinding Wheel Dimension 355 x 25 x 127 mm grinding wheel turning speeds 1.500 / 1.800 mm power requirement 2,2 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Hnodsxp R D Nopfx Ah Ujw Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2015, Okamoto ACC 64 CA Surface grinding machine Okamoto ACC 64 CA with CA Surface Grinding Control, year of manufacture 2015, excellent condition. CE compliant!! Hodpfx Ahexp H Ike Usnw The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: - Year of manufacture: 2015 - Table size: 605 x 400 mm - Table travel: 800 x 440 mm - Distance spindle center (min/max): 22.5 – 522.5 mm - Max. load: 1000 kg - X axis longitudinal travel: 3000 – 25000 mm/min - Y axis crossfeed: 0 – 2000 mm/min - Rapid traverse: 4000 mm/min - Z axis infeed: 0.0001 – 0.001 mm - Rapid traverse: 1000 mm/min - Grinding wheel: 355 x 38 x 127 mm - Speed: 500 – 2500 rpm - Motor: 5.5 kW - Weight: 4950 kg - Dimensions: 3550 x 2695 x 2203 mm Accessories and features: About the machine: Offered here is a surface grinding machine Okamoto ACC 64 CA with CA Surface Grinding Control. This universal surface grinding machine is in excellent original condition. It comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. With a grinding path of 800 mm longitudinally and a cross travel of 400 mm, this machine is ideal for toolmaking, jig manufacture, and small batch production. The series stands out for its comprehensive standard equipment and ease of operation. The robust spindle head design and the double V-guideways in both longitudinal and cross axes ensure lasting precision. The intuitive operation of the control elements simplifies handling and significantly increases productivity. The guideways are automatically lubricated via a central lubrication system. The Okamoto has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Okamoto under power on site. You can find further surface grinding machines from reputable manufacturers on our website.

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1735072, grinding length: 600 mm, grinding width: 300 mm, total height: 1,800 mm, total length: 2,630 mm, total width: 1,550 mm, distance table to spindle center: 500 mm, table load: 300 kg, grinding wheel width: 38 mm, spindle speed (max.): 1,450 rpm, overall weight: 1,750 kg, power: 3.75 kW (5.10 HP), input voltage: 400 V, disc diameter: 355 mm, Exhibition machine for sale – top condition Hjdpfx Asxpvxreh Uonw - Designed for precision surface grinding tasks in industrial applications - Maximum rigidity and stability thanks to stress-relieved annealed and hardened cast iron construction - High-quality spindle with precision tapered roller bearings (runout accuracy 2 µm) - Electromagnetic chuck for securing workpieces, including automatic demagnetization function - Automatic central lubrication system for all guideways and spindles - Hand-scraped and Turcite-B-coated V-flat guideways ensure extremely smooth, low-friction movement and highest precision - Halogen work lamp: dustproof, fully touch-protected, and protected against water jets according to IP65 - A second grinding wheel flange is included in the delivery AD 5 automatic feed control The FSM series models are equipped with an automatic feed control (AD 5). Various grinding cycles are available: surface grinding with infeed at the starting point, slot grinding with infeed at the starting point, and slot grinding with infeed at both the start and end points. The infeed of the grinding wheel can be individually configured depending on the workpiece. The total grinding dimension is divided into rough and fine infeed steps, which can be freely programmed with a minimum increment of up to 0.001 mm, depending on the application. The system also allows dwell times after a defined number of infeed steps and spark-out passes after reaching the grinding dimension, ensuring optimal grinding results.