Inproconsa Srl

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 1,830 h, load capacity: 1,500 kg, lifting height: 4,300 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 1,975 mm, fork length: 1,200 mm, empty load weight: 3,200 kg, total length: 1,850 mm, drive type: Elektro, construction width: 1,000 mm, Electric 3-wheel forklift Load centre: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: Good Front tyres type: Superelastic Lodpfx Aex Ntb Hef Sohr Front tyres condition: 60 - 80% Rear tyres type: Superelastic Rear tyres condition: 40 - 60% Battery voltage: 24V Battery capacity: 492Ah Battery year: 2020 Sideshifter, 3rd valve, rear work lights, front work lights, overhead guard, windscreen, load backrest, impulse control, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 1,150 h, load capacity: 1,500 kg, lifting height: 4,300 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 1,975 mm, fork length: 1,200 mm, empty load weight: 3,200 kg, total length: 1,850 mm, drive type: Elektro, construction width: 1,000 mm, Electric 3-wheel counterbalance forklift Load centre: 500 mm ISO class: ISO class 2 = 1,000 – 2,500 kg Mast type: Triplex Technical condition: good Front tyre type: superelastic Front tyre condition: 60 – 80% Rear tyre type: superelastic Rear tyre condition: 20 – 40% Battery voltage: 24V Battery capacity: 600Ah Battery year of manufacture: 2015 Lodpfx Asx Ntbyof Sjhr Sideshift, 3rd valve, rear work lights, front work lights, overhead guard, front windscreen, load backrest, electronic impulse control, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, load capacity: 2,000 kg, fuel type: electric, fork length: 2,350 mm, empty load weight: 900 kg, total length: 670 mm, drive type: Elektro, construction width: 730 mm, Low-lift pallet truck Load center: 600 Mast type: None Technical condition: very good Front tyres type: Polyurethane Ljdpfex Ntbtox Af Sohr Front tyres condition: 100% Rear tyres type: Polyurethane Rear tyres condition: 100% Battery voltage: 24V Battery capacity: 300Ah Battery year: 2024 Description: Power steering Pulse control, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,520 h, load capacity: 1,600 kg, lifting height: 4,700 mm, free lift: 1,610 mm, mast type: triplex, construction height: 2,120 mm, fork length: 1,200 mm, empty load weight: 3,440 kg, total length: 2,000 mm, construction width: 1,100 mm, Electric 3-wheel forklift Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: very good Front tyre type: Superelastic Front tyre condition: 100% Rear tyre type: Superelastic Rear tyre condition: 100% Battery voltage: 48V Lhsdpfx Ajx Ntbmjf Sjr Battery capacity: 625Ah Battery manufacturer: Factory reconditioned in 2025 Battery year of manufacture: 2025 Sideshift, 3rd valve, rear work light, pulse control, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 810 h, load capacity: 1,600 kg, lifting height: 3,500 mm, free lift: 1,680 mm, fuel type: electric, mast type: duplex, construction height: 2,220 mm, fork length: 1,200 mm, empty load weight: 3,300 kg, total length: 1,900 mm, drive type: Elektro, construction width: 1,100 mm, Electric 4-wheel forklift Lsdpfxox Ntbgj Af Sehr Load centre: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: very good Front tyre type: Superelastic Front tyre condition: 100% Rear tyre type: Superelastic Rear tyre condition: 100% Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: Factory-refurbished in 2025 Battery year of manufacture: 2025 Description: Factory-refurbished used unit by Toyota, including new inspection and certification according to FEM (formerly UVV). Sideshift, Third valve, fourth valve, rear work lights, front work lights, overhead guard, front windscreen, impulse control, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 2,170 h, load capacity: 2,700 kg, lifting height: 7,500 mm, free lift: 2,687 mm, fuel type: electric, mast type: triplex, construction height: 3,550 mm, fork length: 1,150 mm, empty load weight: 5,000 kg, total length: 1,960 mm, drive type: Elektro, construction width: 1,710 mm, Four-way reach truck Load centre: 600 Mast type: Triplex Technical condition: very good Front tyre type: cushion tyres Ljdpfxex Ntbae Af Sohr Front tyre condition: 100% Rear tyre type: cushion tyres Rear tyre condition: 100% Battery voltage: 48V Battery capacity: 775Ah Battery manufacturer: Factory-refurbished in 2025 Battery year of manufacture: 2025 Description: Factory-refurbished used unit from Toyota, including new inspection and new acceptance in accordance with FEM (formerly UVV). Fork positioner, 3rd valve, 4th valve, impulse control, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 250 h, load capacity: 2,000 kg, lifting height: 1,900 mm, fuel type: electric, mast type: simplex, construction height: 1,440 mm, fork length: 1,150 mm, empty load weight: 900 kg, total length: 800 mm, drive type: Elektro, construction width: 800 mm, Pedestrian stacker Load centre: 600 Mast type: Standard Technical condition: normal Front tyre type: Polyurethane Front tyre condition: 60 - 80% Rear tyre type: Polyurethane Rear tyre condition: 60 - 80% Battery voltage: 24V Battery Ah: 225Ah Ljdpfxsx Nta Ns Af Sehr Battery year: 2022 Pulse control, initial lift,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 360 h, load capacity: 2,000 kg, lifting height: 1,900 mm, fuel type: electric, mast type: simplex, construction height: 1,440 mm, fork length: 1,150 mm, empty load weight: 900 kg, total length: 800 mm, drive type: Elektro, construction width: 800 mm, Stacker Load center: 600 Mast type: standard Technical condition: normal Front tire type: polyurethane Front tire condition: 60 - 80% Rear tire type: polyurethane Rear tire condition: 60 - 80% Lhjdpjx Nta Asfx Af Ser Battery voltage: 24V Battery capacity: 225Ah Battery year: 2022 Impulse control, initial lift,

Condition: used, empty load weight: 6,770 kg, axle configuration: 3 axles, first registration: 06/2017, suspension: air, Year of construction: 2017, gearing type: mechanical, Equipment: ABS, Tare weight: 6770kg, Air suspension, Rear underrun, Electronic Brake System EBS, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Lsdpox Ntavjfx Af Sehr

Condition: used, empty load weight: 6,579 kg, axle configuration: 3 axles, first registration: 02/2017, suspension: air, Year of construction: 2017, gearing type: mechanical, Equipment: ABS, Tare weight: 6579kg, Air suspension, Rear underrun, Electronic Brake System EBS, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Lhsdpfjx Ntapjx Af Sjr

Condition: used, empty load weight: 9,690 kg, maximum load weight: 28,310 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 12/2019, suspension: air, tire size: 385/65 R22,5, Year of construction: 2019, Poids à vide: 9690kg, Poids total admissible: 38000kg, La taille du pneu: 385/65 R22.5, 1er essieu: , 2ème essieu: , 3ème essieu: , Suspension pneumatique, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télés serons heureux de vous conseiller personnellement. Lsdpfsx Ntaiox Af Sjhr

Condition: used, functionality: fully functional, machine/vehicle number: 014256, Year of construction: 2023, operating hours: 905 h, load capacity: 5,000 kg, lifting height: 4,675 mm, free lift: 1,460 mm, mast type: triplex, construction height: 2,360 mm, fork length: 1,200 mm, Electric 4-wheel forklift Chassis number: 014256 Load centre: 500 Mast type: Triplex Technical condition: very good Front tyres type: Non-marking Rear tyres type: Non-marking Battery voltage: 80V Battery capacity: 930Ah Battery type: PzS Battery year: 2023 Description: Find your forklift at STA-TECH! Whether pallet trucks, electric, diesel or LPG forklifts – we offer affordable, ready-to-use models and new forklifts. STA-TECH is your partner for: • Purchase and rental of forklifts and warehouse technology • Purchase of used equipment and logistics • Multibrand service: repair, maintenance, inspections Lhedpfx Aex Nr U Sof Sjr 3rd valve, 4th valve, rear working light, front working light, heater, road approval, full cab, full free lift, joystick,

Condition: new, functionality: fully functional, machine/vehicle number: 014257, Year of construction: 2026, operating hours: 1 h, load capacity: 16,000 kg, lifting height: 4,710 mm, free lift: 1,570 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, fork length: 2,400 mm, drive type: Elektro, Heavy-Duty Forklift - Electric Chassis number: 014257 Load centre: 1200 mm Ljdpfxox Nr U Eo Af Sohr Fork width: 200 mm Fork thickness: 90 mm Mast type: Triplex Condition: New unit Technical condition: New Front tyres type: Non-marking Front tyres condition: New Rear tyres type: Non-marking Rear tyres condition: New Battery voltage: 618V Battery capacity: 228Ah Battery type: Lithium-ion Battery year: 2025 Battery condition: New Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, air conditioning, full free lift, CE certification, lithium-ion technology, single-pedal operation, LED lights, roller-guided fork positioner with side shift, lift and lowering damping at the mast, USB interface 5V, fully enclosed cab with rubber-damped chassis mounting, heating and air conditioning, defrost and electrohydraulic tilt function, multifunction joystick for hydraulic controls, suspended Grammer seat type 85/722 with armrests, seat heating and OPS (Operator Presence System), rear distance sensor and reversing camera with LCD display, LED work lights on mast and fenders, front and rear lights, reversing bluespot (blue warning point), SE tyres (light colour), beacon (strobe warning light), indicators front and rear, as well as area warning lights on left, right and rear.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, General Data Machine weight 14000 kg Measurements height 2355 mm Dimensions Machine Length 7800 mm Injection Unit Screw diameter 90 mm Clamping Unit Clamping force 5000 kN Lhsdpfjx Nr Uxox Af Ssr This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2009, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis MORBIDELLI UNIX KBT was manufactured in 2009. It features a CNC control system, a working area of 3000 × 1000 mm, and a maximum panel thickness of 60 mm. Equipped with multiple drilling and milling units, including 24 vertical and 4 horizontal spindles, it also has a fixed saw unit and supports both manual and automatic panel handling. Consider the opportunity to buy this MORBIDELLI UNIX KBT CNC Wood Machining Centre. Contact us for more information. Ljdpfsx Nr Urex Af Sohr Application Types CNC Wood Machining

Year of construction: 2021, operating hours: 1,074 h, condition: ready for operation (used), General Data Measurements width 2190 mm Measurements depth 5510 mm Measurements height 2226 mm Machine weight 5900 kg Main Drive Spindle speed range 1500 Spindle motor power 18 kW Spindle bore Ø130 mm Number of axis 2 Workpiece Workpiece drm over bed 600 mm Workpiece drm over support 360 mm This COMEV PicoDue 300 EVO was manufactured in 2021. It features a powerful 18 kW motor, a spindle speed of 1,500 rpm, and a RAPID Original quick-change tool holder with 4 positions. The CNC lathe has a spindle bore of Ø130 mm and can handle workpieces up to Ø600 mm over the bed. Ideal for single-piece and small to medium series production, mainly in aluminum and structural steels. Contact us for more information about this machine. Ljdpfjx Nr Ulsx Af Sehr Application Types Turning

Condition: ready for operation (used), Year of construction: 2015, General Data Ledpfex Nr Ufjx Af Sohr Measurements width 1800 Measurements depth 3450 mm Measurements height 950 mm Table Table load 200 kg This BARTH VMPH 3013 laminating press was manufactured in 2015. It features dimensions of 3450 x 1800 x 950 mm and a clamping area of 3000 x 1320 mm. The vacuum table supports up to 200 kg with a maximum vacuum pressure of -0.95 bar. It operates on 400 VAC/50 Hz with a connected load of 12 kVA. Consider the opportunity to buy this BARTH VMPH 3013 laminating press. Contact us for more information about this machine. Application Types Pressing / Laminating

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,960 h, Control Unit Brand HEIDENHAIN Main Drive Number of axis 2 Turret Number of turrets 1 Tools Number of station 12 Additional Equipment Bar package with a pick-up device and parts conveyor belt Lhsdpfx Aox Nr T Uof Sor Bar guide for 1.5 metre bars and workpiece stop Hainbuch SK 65 clamping top Indicator light for machine's operating status Cooling unit for air conditioning the control cabinet OPTIONAL: A basic tool kit / A large selection of Hainbuch SK 65 clamping heads This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2021, operating hours: 3,415 h, condition: ready for operation (used), General Data Machine weight 4500 kg Control Unit Brand MAZATROL Ledpfx Afjx Nr T Ie Sshr Main Drive Number of axis 2 Movement X-Axis Movement 425 mm Z-Axis Movement 600 mm Additional Equipment Collet chuck; 2x 3-jaw chuck Includes bar loader This Mazak QTC 100 MSL horizontal turning machine was manufactured in 2021. Ideal for versatile machining operations. Consider the opportunity to buy this Mazak QTC 100 MSL horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2000, condition: ready for operation (used), Main Drive Bending length 2500 mm Number of axis 3 Additional Equipment Ljdpfx Afox Nr Tzs Sshr O+UC1000/2(SO) P40FFICE Tool set consisting of 13 CLA tool pairs for a total length of 1100 mm Includes pairs of CLA tools ranging from 25 mm to 90 mm Quick-clamping segments for large-area recesses This 3-axis Salvagnini P4-2512 was manufactured in 2000, featuring a max bending length of 2500mm and handling sheet thicknesses up to 3.00mm. It includes quick-clamping segments for enhanced flexibility and precision in sheet metal operations. If you are looking to get high-quality bending capabilities, consider the Salvagnini P4-2512 machine we have for sale. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Condition: ready for operation (used), Year of construction: 2002, operating hours: 55,730 h, General Data Machine weight 24500 kg Control Unit Brand SIEMENS Model Sinumerik Main Drive Spindle speed range 12000 Spindle motor power 35 kW Number of axis 3 Movement X-Axis Rapid Traverse 100 m/min Lsdpfx Afjx Nr Tue Sehr Y-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 60 m/min Table Table load 3100 kg Turret Number of tool slots 9 Tools Max weight 6 kg (SK40/HSK63) or 12 kg (SK50/HSK100) Type of tool holder HSK-63 Additional Equipment Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2002. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Model CC300 microcomputer Brand ENGEL Injection Unit Screw diameter 45mm Clamping Unit Clamping force 500 tons Additional Equipment Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Lhjdpfx Afox Nr Tnj Ssr Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2018, operating hours: 24,257 h, This STEINER Projet MJP 2500 Plus was manufactured in 2018. It's a plastic 3D printer designed for detailed and precise object creation. Ideal for prototypes and small-scale production, this machine represents a significant opportunity for those looking to enhance their 3D printing capabilities. Contact us for more information. Application Types 3D Printing Ledpfxsx Nr Tho Af Sehr

Condition: ready for operation (used), Year of construction: 2001, Additional Equipment Software: QSPAK Version 3.1 / Operating system: Win10pro This 3-axis Mitutoyo Quick Scope QS-250Z was manufactured in 2001. It features a measuring range of X=200 mm, Y=250 mm, Z=100 mm, and a maximum travel speed of 80 mm/s. The machine includes a 1/3" CCD color camera and various lighting options, enhancing visibility and precision. Ideal for detailed component analysis, consider the opportunity to buy this Mitutoyo Quick Scope QS-250Z CMM machine. Contact us for more information about this machine. Application Types Lsdpfx Afex Nr Tbj Sjhr Measuring

Year of construction: 2011, condition: ready for operation (used), General Data Measurements width 1120 mm Measurements depth 4400 mm Measurements height 1430 mm Machine weight 3920 kg Main Drive Spindle speed range 1600 Spindle bore 80 mm Tool taper MT 7 Workpiece Workpiece drm over bed 560 mm Workpiece drm over support 350 mm Workpiece weight 600 kg Tail Stock Pinol diameter 75 mm Pinol tool taper MK 5 Additional Equipment Lead Screw Thread Pitch: 6mm Longitudinal Feed [mm/rev] in the Range: 0.059 - 1.646 Cross Feed [mm/rev] in the Range: 0.020 - 0.573 Metric Pitch [mm/rev] in the Range: 0.2 - 14 Inch Pitch [Threads/Inch] in the Range: 112 - 2 Modular Threads in the Range: 0.1 - 7 Diametrical Threads (ISO 678) in the Range: 4 - 112 Ledpfx Afox Nr S Ro Sjhr This Optimum D 560x3000 was manufactured in 2011. It features a spindle bore of 80 mm, a swing diameter over bed of 560 mm, and a maximum workpiece weight of 600 kg. The machine offers a spindle speed up to 1600 rpm and includes a coolant pump. Ideal for precision turning operations. Contact us for more information. Application Types Turning