Eterix Sweden AB

Condition: used, functionality: unexamined, No. 453 Ess TM 30-151 No. 454 Grau ASM 30-60 No. 455 Ess TM 30-122 Tool EI 66 Hjdpeyntu Aefx Af Uei No. 456 Grau ASM 60-120 No. 457 ESS TMR 30-84 No. 478 Waasner TKSM/H No. 479 Waasner TKSM/H No. 480 Ess TM 30-151 Information available in documents

Year of construction: 2016, condition: ready for operation (used), An industrial TIG welding power source Merkle in AC/DC version is available. Insulation class: S, Cooling: AF, Voltage: 400V, Power factor: 0.95. Documentation available. An on-site inspection is possible. Hjdpfxsynatrj Af Uoi

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: Hsdpfxsym Unzs Af Uei - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Year of construction: 2012, condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, total length: 3,000 mm, total width: 1,000 mm, total height: 1,500 mm, No reserve price – guaranteed sale to the highest bidder! Bidding constitutes a binding obligation for timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Beam polarization: 100:1, vertical MACHINE DETAILS Hodpsym Rxvefx Af Uoi Nominal tube voltage at maximum tube current: 533 V Fill voltage at maximum tube current: 530 V Maximum tube current: 65 A Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,000 x 1,500 mm Weight: 500 kg EQUIPMENT Matching components External reference: CES - Lot 138

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H34008-HW, Welding System for Frame Welding of Tinplate Cans with Comprehensive Peripheral Equipment! The new price of the machine was CHF 800,000! The system comprises the following components: - Can Man X7-300 WeldCenter (Serial no.: H34008-HW) - Sheet Transfer and Storage System PowerFEED (Serial no.: H31723) & PowerSTORE (Serial no.: H31503) - Induction Oven PowerCURE (Serial no.: H33620-HS) - Goudsmit Magnetics Palletising Magnet TPLC12804 - BASCO Leak Tester PRE 1024 GLX - Hyfra SIGMA 28-S Chiller Further configuration details can be found in the attached document. Can Man X7-300 WeldCenter TECHNICAL DETAILS (according to manufacturer) - Production output: 100 – 600 pcs/min - Strip speed: 10 – 100 m/min - Sheet thickness: 0.10 mm – 0.28 mm Can body dimensions: - Min. can body dimensions: Ø 52 x 50 (height) mm - Max. can body dimensions: Ø 153 x 320 (height) mm Goudsmit Magnetics Palletising Magnet TPLC12804 TECHNICAL DETAILS - Product diameter: 65 mm – 230 mm - Product weight: max. 5 kg - Pallet size: 1,200 x 800 mm MACHINE DETAILS - Magnet dimensions: 1,226 x 826 mm Pneumatics: - Working pressure: 6 – 8 bar - Air consumption: 8 L/stroke Ambient temperature: -20°C to 40°C Robot interface: Available Vacuum system: Integrated Hsdeymxlqopfx Af Usi EQUIPMENT - Interface for robotic arm - Integrated vacuum system for handling sheets between can layers - Perforation pattern for robotic arm - Magnet plate (2x) - Vacuum connection (1x) - Pneumatic tubing (3x) - Sensor connection box Hyfra SIGMA 28-S Chiller MACHINE DETAILS Dimensions & Weight: - Dimensions (L x W x H): 715 x 715 x 1,554 mm - Weight: 210 kg EQUIPMENT - Tank volume: 120L - Scroll compressor - Stainless steel frame construction - Automatic water make-up - Bypass valve - Water level indicator - Pressure gauge in water supply - Dry-running protection pump - Ball valve for tank drainage - Fault indication with digital display - High-efficiency condenser - Metal filter cells

Condition: excellent (used), Year of construction: 2015, Technical specifications: Welding robot with 3 axes Number of axes: 3 Travel range: Longitudinal travel: 4,200 mm Hodoymnqpepfx Af Usi Transverse travel: 1,200 mm Vertical travel: 1,000 mm Rotary head with motorised tailstock Centre height: 980 mm Centre distance: 4,500 mm Carrying capacity of 1 rotary device: 3,000 kg Power source: FRONIUS Transpuls Synergic 5000 MIG/MAG Welding torch cleaning station: ABICOR BINZEL The seller assumes no liability for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any guarantee or warranty.

Condition: used, SOLID STATE HF WELDER EFD INDUCTION WELDAC 250 kW SCOPE OF SUPPLY Hedeymak Uopfx Af Uoi 1. Complete welding unit EFD Weldac 250Kw 2. Input Autotransformer 3. Complete cooling unit and water circuit 4. Control desk with PC 5. Existing documentation 6. Output busbar TECHNICAL DATA Manufacturer EFD Induction Model WELDAC 250 Nominal power (output power): 250kW Welding-Frequency (nominal): 250 -310Khz Total installed power: 346KVA Nominal power: 250 kW Welding frequency range: 250 -310 kHz Total installed power: 346 kVA

Condition: used, THERMATOOL HF welder CFI 200KW In excellent working conditions. Solid State HF welder: CFI200 Output power: 200 kW Welding frequency: 400 KHz Scope of supply - DC Power cabinet - HF cabinet with auto-match system and output busbar to coil holder - Single axis adjustment table - Operator HMI diagnostic system/controls - Closed loop Water cooling pump/heat exchanger - Spare electrical cards x 12 - Spare thyristors/power supplies(4) / spare auto-match drive belts - Approximately 40-45 induction coils in various sizes to suit tube range 19-89mm Solid State HF welder: CFI200 Hsdpfx Aeymad Isf Uoi Output power: 200 kW Welding frequency: 400 KHz

Year of construction: 2007, condition: used, THERMATOOL High Frequency Welding CFI 350 kW VF Fully revised in 2025 by Thermatool specialists Technical specifications Output power: 350 kW Welding frequency: 180 - 300 KHz Input voltage: 380 VAC / 50 Hz Total installed power 525 kVA Output power: 350 kW Welding-frequency: 180 - 300 KHz Hjdpfoymadbex Af Uei Input Voltage : 380 VAC / 50 Hz Total installed power: 525 kVA

Year of construction: 2021, condition: used, GH INDUCTION | EMMEDI HF welder 100kW In excellent working conditions. Year 2021. Solid-state high-frequency induction heating generator 100Kw for tube welding applications · Welding frequency: 400 KHz · Power: 120 KVA · Modules: SiC SiliconCarbide IGBT Hodpfx Afoyl U R He Usi Scope of supply · Power cabinet with digital control (MPC-3 HMI touchscreen interface) · Oscillator module · XYZ motorized inductor positioning system · Operator control desk with diagnostic display, manual/automatic modes · Cooling system with air–water heat exchanger Welding frequency: 400 KHz Power: 120 KVA Modules: SiC SiliconCarbide IGBT

Condition: excellent (used), Year of construction: 2010, Tekol / Trumpf Laser Welding System Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 Extraction Unit Description: For sale is a professional laser welding system Tekol LAP S4 equipped with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction and filter unit. This system is an enclosed precision laser welding station designed for fine, pinpoint, and low-distortion welding of metal components. Hedpfeyi Sgasx Af Uji The pulsed laser enables highly controlled heat input, clean weld spots, and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototyping, and small series production. Enclosed safety housing with protection system, control panel, rotary indexing table, and extraction/filter system. Technical Data – Tekol LAP S4 Operating voltage: 400 V ~ N / PE Mains type: 3~ 400 V, 50 Hz Nominal current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel: X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary indexing table: 2-station Technical Data – Laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical Data – Extraction Unit TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Free-blowing air volume: approx. 390 m³/h Effective air volume: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: - Pre-filter - Particle filter - Activated carbon filter Total weight approx. 900 kg Condition: used Scope of supply: (see photos) - Tekol LAP S4 laser welding system - TRUMPF TruPulse 44 laser unit - TBH GL 230 extraction unit - Documentation / folders / data carriers - Keys and accessories as shown (Specifications and technical details are subject to change and errors!) If you have further questions, please feel free to contact us by phone.

Year of construction: 2008, condition: ready for operation (used), Working dimensions X/Y: 2000mm/1500mm, max. clearance height: 70mm, max. material width: 1690mm, speed: 2m/min, acceleration: 18m/s², resolution: 0.001mm, accuracy: +/-0.05mm, repeatability: +/-0.05mm, laser source: Rofin ScX series 300W, laser class: 1, laser power: 300W. The laser source is defective. Including shuttle table, cooling unit, hydraulic unit and register mark recognition camera. Documentation available. An on-site inspection is possible. Hodpjyi E Eijfx Af Uei

Year of construction: 2011, condition: ready for operation (used), Laser power: 4kW, Laser type: CO2, Laser model: YB-L400A 8M, Wavelength: 10.6µm, Pulse type: N/P, max. Beam diameter: 22.5mm, Power stability 8h: +/-2%, Gas consumption: approx. 30l/h, Travel path X/Y/Z: 3260mm/1545mm/430mm, max. Workpiece dimensions X/Y/Z: 3050mm/1545mm/25mm, max. Table load: 915kg, Machine dimensions X/Y/Z: approx. 8000mm/2900mm/2600mm, Weight: approx. 14200kg, Control: Mazatrol Preview M, Operating hours: approx. 31105h. The integrated thread cutting unit is defective. Including linear guide for the tube cutting device and various wear parts. Documentation available. An on-site inspection is possible. Hodpfoyifl Hsx Af Uoi

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: C22M0004, type of input current: three-phase, input voltage: 400 V, ground cable length: 3,000 mm, overall weight: 115 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, electrical fuse: 32 A, welding power (max.): 22 kVA, open-circuit voltage: 62 V, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 350 A, input current: 32 A, protection type (IP code): IP23, welding current (min.): 20 A, welding current (max.): 400 A, input frequency: 5,060 Hz, continuous power (apparent): 16 kVA, Equipment: documentation/manual, type plate available, Welding Machine Sincosald Evolution SP4-E (Multi-process inverter welding machine) The Sincosald Evolution SP4-E is a high-performance multi-process inverter welding machine designed for professional industrial applications. Manufactured by Sincosald, this model combines flexibility, power, and reliability in a compact and robust design. The machine supports multiple welding processes, including MIG/MAG, MMA, TIG Lift, and spot welding, making it suitable for a wide range of welding tasks. It delivers a maximum welding current of 400 A, with a duty cycle of 400 A at 60% and 350 A at 100%, ensuring stable performance during continuous operation. The Evolution SP4-E operates on three-phase power (3 × 400 V, 50/60 Hz) and features an open-circuit voltage of approximately 63 V. The inverter technology provides precise arc control, smooth ignition, and reduced spatter, while advanced functions such as Hot Start, Arc Force, Anti-Stick, Soft Start, Burn-Back, and programmable welding parameters enhance usability and welding quality. The machine is rated IP23S, making it suitable for demanding workshop environments. With an overall weight of approximately 115 kg, the SP4-E offers a solid industrial build while remaining mobile within the workshop. Cooling is provided by an efficient air system, with the option to use a water-cooled torch when required. The Sincosald Evolution SP4-E is an ideal solution for metal fabrication, repair workshops, and industrial production environments that require a powerful and versatile welding power source. Key Features: *Multi-process welding: MIG/MAG, MMA, TIG Lift, Spot *Maximum welding current: 400 A *Duty cycle: 400 A 60% / 350 A 100% *Three-phase input power: 3 × 400 V, 50/60 Hz *Inverter technology for precise arc control *Advanced welding functions (Hot Start, Arc Force, Anti-Stick, Burn-Back) *Protection class IP23S *Industrial-grade construction *Manufacturer documentation available Typical Applications: *Industrial MIG/MAG welding *Structural steel fabrication *Maintenance and repair work Hsdpfxoyh U Twj Af Usi *Medium and heavy metal construction *Workshop and production environments

Year of construction: 2011, condition: ready for operation (used), Laser: CO2, laser source: Convergent Lasers CP 3000, working dimensions X/Y/Z: 3065mm/1500mm/150mm, max. traverse speed: 140m/min, positioning accuracy: +/-0.03mm, repeatability: +/-0.03mm, max. cutting capacity steel/stainless steel/aluminum: 20mm/12mm/8mm. Machine dimensions X/Y/Z: approx. 10600mm/3550mm/2500mm, weight: approx. 10000kg, control: Primach-20L, laser hours: 56739h. Including extraction system. Documentation available. On-site inspection is possible. Hedpfx Afjyh Nu No Uei

Year of construction: 2002, condition: ready for operation (used), A complete IGM welding system with robot is available. Robot: igm RTI 2000, roller bed: igm RB 300, positioner: igm RP 300, control: PLC/Kuka K C2, overall system dimensions X/Y/Z: approx. 5250mm/4000mm/2800mm, drive time: 31091h, welding hours: 12930h, waiting time: 99278h, total time: 113051h. Without workpiece fixtures. Documentation available. An on site inspection is possible. Expected to be available in May 2026. Hjdpfxeyh Nvaj Af Uoi

Condition: new, Jackson Translight 555+ Welding Helmet ADF Welding Helmet with ADF black TECHNICAL DATA Viewing area: 98 x 82 mm Optical clarity: 1/1/1/1 True Color: yes Weight: 612 g Protection level open: 3 Protection level closed: 5-8/9-14 Control: Digital Step adjustment: yes / internal Sensitivity adjustment: yes / internal Delay adjustment: yes / internal Grinding mode: yes / external Switching time: 0.2 ms Power supply: Solar cells & lithium (CR2032) batteries Hjdpfx Afsyh H Ade Uei

Condition: ready for operation (used), Two nearly identical Rofin laser machines are available. Wavelength: 10600nm, operating power: 4kW, max. pulse power: 8kW, pulse duration: 0.5ms, laser type: CO2 slab laser, cooling: diffusion cooling, max. pulse frequency: 5000Hz, polarization: linear, excitation: RF, gas type: premix. Machine dimensions X/Y/Z: approx. 2300mm/1000mm/1900mm, weight: approx. 1700kg. Documentation available. On-site inspection is possible. Hedsydp Auspfx Af Uoi

Year of construction: 1996, condition: good (used), PTW 150 Complete orbital tube welding machine with two complete and fully overhauled welding heads, (and 2 extra fully operational welding heads, respectively for up to 2" and 4") (see pictures) for sale. It includes "collets" (clamping sleeves) for most pipe dimensions from ½" to 4". This equipment is one of 5 orbital welding machines I have had, and it has mainly been used on 54x2mm, in addition to building 5-6 central gas systems with tubes of 12-18 and 28mm, and some 88.9mm. The equipment is complete, ready to weld with cables, gas hoses, red. valve etc. The equipment is delivered in original transport boxes, has complete set of manuals/part lists. Buyers can have the equipment delivered to their door, and up to 1 week of free training (including with many years of experience!) anywhere in Europe! New orbital equipment with the same spec, would cost typical some €40k + with just ONE weldhead. (One enclosed weldhead is typical €12-13000 without collets, typical €300 /dimension you will weld) At the two plants in Norway that operated with nuclear power (Kjeller and Halden), the same type of welding machine was the only one that was able to weld according to the requirements they set! (like 100% Helium, - 200 bar, - vaccum etc) The user interface is simpler on newer machines, but if you can calculate the circumference of a tube, you are well off. If you are wondering if orbital welding is something for you, it involves very little risk when you can get complete equipment, delivered on your door step, welding program for all pipe dimensions from ½" to 4" and one week of training for €10k, (and in addition 3 decades of experience) Hjdpfxsycwk Rj Af Uei

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Wegmann Basel Laser TR6000 PI GON for sale. Was in operation until recently and works perfectly. Being replaced due to a newer device with a maintenance contract. - Year of manufacture: 08/1999 - Model: TR6000 - Serial no.: 819 - 6900 watts - Wavelength: 10,600 nanometres - 400V - Maximum current: 85 amps Hsdpox U Etlsfx Af Uei Loading by forklift. Delivery available upon agreement.

Year of construction: 2006, condition: ready for operation (used), A complete Severt robotic welding system is available. Travel path X: 8000mm, robot axes: 6, stations: 2, axis positioners: 2, positioner speed: 6rpm, positioner load capacity: 1000kg, faceplate torque: 1000Nm, power source: OTC DP 500, power output: 350A. Including seam tracking sensor, push-pull torch, hose packages, wire guide spirals, contact tips, gas nozzles and additional items. Documentation vorhanden. On-site inspection is possible. Hjdpfxox U Dxao Af Uji

Year of construction: 2025, condition: as good as new (ex-display), CNC welding and cutting system Plug & Play – ready for immediate use Hedpfx Ajx Ux Nmof Uoi Almost limitless – prototypes & series production Lightning-fast setup in

Year of construction: 2021, condition: used, max. temperature 1.280 °C Temperature range 900 - 1.280 °C Oven room ca. 350 x 500 x 250 mm Oven chamber volume ca. 40 L Loading height 900 mm weight approx. 260 kg External dimensions ca. 840 x 1.160 x 1.320 mm control Controller B 400 connected load frequency 400 V 3/N/PE 50Hz connected load 15,0 kW Electrically heated chamber annealing furnace with radiant heating Technical features & accessories: - Controller B 400 - Base frame Hjdpfox Urupsx Af Usi - Temperature uniformity in the working temperature range +/- 10 K according to DIN 17052-1 in the empty working chamber Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Year of construction: 2008, condition: ready for operation (used), A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027. Hodpfx Afjx Tumxs Usi

Year of construction: 2008, condition: used, functionality: fully functional, We offer this used Schunk Sonosystems GmbH SWR 20 ultrasonic welding machine, year of manufacture 2008. Hjdpfxox Sdt So Af Uji Mains voltage: 3 × 400 V If you have any questions or require further information, please feel free to send us a message or call us.