Breitenkamp

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Model PSG 63 – UAN Year of manufacture 1988 Grinding length 600 mm Grinding width 320 mm Maximum workpiece height 500 mm Table longitudinal travel 750 mm Table cross travel 340 mm Grinding wheel diameter 350 mm Grinding wheel width 40 mm Spindle speed 1,500 rpm Kodpsyvy Srofx Abnjdi Rapid vertical traverse 400 mm/min Power 3.7 kW Automatic feed Magnetic chuck Coolant system Weight 2,500 kg Price: €2,500 plus VAT, ex-site

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Surface Grinding Machine Jung - ASYST A525 Retrofit Kedeyvldajpfx Abnodi Excellent condition - Complete documentation - Machine cast body Jung JF 520 - Technical data: Traverse range X-axis: 600 mm Table speed X-axis: 0.3–25 m/min Max. workpiece weight: 200 KG Working area: 400 mm Grinding height Y-axis: 500 mm Travel speed Y-axis: 0–1000 mm/min Positioning accuracy X, Y-axis: 0.001 mm Measurement system resolution Z, Y-axis: 0.0001 mm Grinding wheel dimensions: 250x30x51 mm Spindle speed: 100–3,800 rpm Machine installation dimensions: 2900×2320 Height: 1850 mm Weight: approx. 2300 kg - Very few operating hours (approx. 8,000 h) - Fully functional, last service in February 2026 - Filtration unit - Includes 3 grinding wheel flanges - Diaform device Available at short notice, loading possible Delivery by arrangement possible

Condition: excellent (used), Year of construction: 1994, total length: 2,950 mm, total width: 2,100 mm, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 400 kg, feed rate X-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, grinding wheel diameter: 350 mm, table length: 600 mm, table width: 400 mm, Digital read out system position slides 5 stones and flanches Coolant and Filtration system CE Mark Levelling pads included  Full set off books  X - Travel: 650mm Y - Travel: 400mm Z - Travel: 400mm Table Length: 600mm Table Width: 400mm Table load: 400 Feed rate X-Axis: 0-5000mm/min. Feed rate Z-Axis: 0-5000mm/min. Grinding stone dimensions:350 x 127 x 50mm Power: 6kW Speeds: 1400Rpm Cooling system: Yes Feed rate Y-Axis: 0-5000mm/min. Length: 2950mm Width: 2100mm Height: 2000mm Weight: 2550kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Kjdpfx Abjyvhxmsnsdi

Condition: used, Year of construction: 1994, Empty weight: 2.000 kg - Year: 1994 - Documentation available: No Kodpfx Absyvf Tgonjdi - CE certificate present: No - Serial number: 8139 - Drive system: Conventional - Power [kW]: 7.1 - Number of axes [pcs]: 3 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 600 - Table width [mm]: 1500 - Table depth [mm]: 400 - Magnet width [mm]: 600 - Magnet depth [mm]: 300 - Max. grinding wheel diameter [mm]: 300 - Max. grinding wheel thickness [mm]: 50 - Main spindle power [kW]: 4.5 - Max. spindle speed [rpm]: 1750 - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,980 mm, total length: 1,700 mm, total width: 1,080 mm, Empty weight: 1.000 kg - Documentation available: No Kedpfx Aboyvf Taonsdi - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 400 - Y-axis travel [mm]: 200 - Z-axis travel [mm]: 410 - Table width [mm]: 400 - Table depth [mm]: 175 - Magnet width [mm]: 410 - Magnet depth [mm]: 170 - Max. grinding wheel diameter [mm]: 225 - Max. grinding wheel thickness [mm]: 50 - Transport dimensions: 1700mm x 1080mm x 1980mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Jung F 50 Surface Grinding Machine Condition: Used Technical Data Grinding Length: 500 mm Grinding Width: 200 mm Grinding Height to Spindle Center: 285 mm Table Size: 700 x 200 mm Spindle Speed: approx. 3000 rpm Grinding Wheel: 225 x 20 x 51 mm Feed: manual via handwheel Rapid Traverse Kodsyuy Euopfx Abnsdi Wheel Dressing Device Dimensions (L / W / H): approx. 1850 mm / 1300 mm / 1750 mm Weight: approx. 1400 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Technical details: Clamping table surface: 300 x 700 mm Electro-magnetic chuck: 300 x 600 mm Maximum travel: 640 mm x 320 mm Max. distance spindle center / table: 520 mm Max. workpiece weight*: 200 kg Grinding wheel: 300 x 30 x 75 mm Table speed, hydraulic: 2 - 18 m/min Automatic cross feed: 0.5 – 10 mm/stroke Rapid traverse, cross: 990 mm/min Graduation on handwheel: 0.02 mm Automatic vertical feed: 0.01 / 0.1 mm Kdjdpeyut A Tofx Abnoi Rapid traverse, vertical: 360 mm/min Graduation on handwheel: 0.01 mm Grinding spindle motor: 4.0 kW Spindle speed: 1,440 rpm Hydraulic pump motor: 1.5 kW Length x width x height: 2,000 x 1,650 x 1,850 mm Weight approx.: 1,400 kg Surface Grinding Machine Bernardo FSM 3060 AHD 2-axis digital readout ES-12 H with LCD display Control with touch operation Electronic handwheel Grinding wheel Wheel flange LED work light Electro-magnetic chuck Balancing stand Balancing arbor Protective covers Demagnetizing unit Coolant system Diamond dresser Machine mounts Central lubrication Operating tools

Condition: ready for operation (used), Surface Grinding Machine ELB SWB06 - VAII Kdsdjyup H Ujpfx Abnji - Grinding length: 600 mm - Grinding width: 500 mm - Magnet size: 600x500 mm - Spindle speed: 1,400 / 2,800 rpm - Z - feed / automatic & manual - Y - feed / automatic & manual - Grinding movement / automatic & manual - Grinding wheel dresser - Max. grinding wheel diameter: 300 mm - Coolant system - Drive power approx. 6 kW Dimensions (LxWxH): 2.6 x 2.2 x 2.5 meters / Weight: 3,500 kg Subject to errors and omissions.

Condition: new, functionality: fully functional, grinding length: 510 mm, grinding width: 250 mm, Reduced slip-stick effect thanks to plastic-coated x and y-axis guides. The longitudinal table guide is flat, while the transverse guide is triangular. Radial and axial forces are evenly distributed on special backlash-free bearings in the grinding spindle head. A separate hydraulic unit with heat exchanger prevents vibration and overheating. High stability thanks to ribbing and dimensioned wall thicknesses. Kedpfx Abeyt Hzmjnodi Digital control of automatic vertical feed with servomotor. The hydraulic system ensures smooth table movement, even under heavy load. Rapid approach to workpiece height, automatic lifting after completion of the work cycle. Adjustable longitudinal and vertical table feed via end stops. PLC models are equipped with SIEMENS PLC controllers and touchscreens. Technical specifications: Table clamping surface width: 510 mm Table clamping surface depth: 250 mm T-slots (quantity/width): 1 / 14 mm Electromagnetic table size: 250 x 500 mm Longitudinal travel (x): 560 mm Transverse travel (y): 275 mm Max. spindle axis-to-table distance: 450 mm Max. table load: 180 kg Grinding wheel size: 200 x 20 x 31.75 mm Hydraulic table feed speed: 5 - 25 m/min Grinding spindle speed: 2850 rpm Grinding spindle motor power: 2.2 kW Hydraulic pump motor power: 0.75 kW Vertical feed motor power: 0.5 kW Total motor power: 3.45 kW Voltage: 400 V Dimensions (W x D x H): 1900 x 2050 x 1840 mm Weight (approx.): 1750 kg Transverse feed (Y): Automatic transverse feed: 0.5 - 8 mm/stroke Rapid transverse feed: 990 mm/min Transverse feed per handwheel revolution: 4 mm/rev Graduation on handwheel (Y): 0.02 mm Vertical feed (Z): Automatic vertical feed: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke Rapid vertical feed: 480 mm/min Vertical feed per handwheel revolution: 2 mm Graduation on handwheel (Z): 0.005 mm

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 92060, grinding length: 650 mm, grinding width: 230 mm, total height: 2,276 mm, total length: 3,030 mm, total width: 1,784 mm, workpiece weight (max.): 200 kg, grinding height: 397 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, grinding wheel diameter: 205 mm, table speed: 25,000 mm/min, table length: 2,000 mm, table load: 20,000 kg, type of input current: AC, table width: 2,000 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,100 kg, table height: 250 mm, grinding spindle motor power: 1,500 W, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 300 rpm, rotational speed (min.): 5 rpm, grinding spindle speed: 3,000 rpm, input voltage: 380 V, disc diameter: 205 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Okamoto ACC52SA is a precision surface grinding machine featuring a horizontal grinding spindle and hydraulic longitudinal feed, primarily used in toolmaking, jig and fixture manufacturing, and small batch production. The machine is distinguished by its robust cast construction, precise guideways, and user-friendly operation. It is especially suitable for high-precision grinding of flat surfaces and for machining hardened workpieces. Typical for the ACC series are sturdy double-V guideways and automatic feed systems, ensuring uniform surface quality and high repeat accuracy. Okamoto SA Control (MDI control) Kdjdpfsyt Dm Hox Abnsi Cycle control and manual operation The quoted price is exclusive of dismantling, packaging, and shipping. Sale from site, subject to prior sale. The machines are sold in used condition; any warranty or guarantee is excluded.

Condition: ready for operation (used), Alpa RTL 1000 Ksdpfx Abeytyq Ujnedi Worklength with magnetic table: 1000 mm Grindingwidth: 635 mm Longitudinal travel X-axis (autom.): 1150 mm Cross-travel Y-axis (autom.): 560 mm Travel Z-axis (autom.): 620 mm Dimensions magnetic table: 1000 x 500 mm Max dia grindingstone: Ø 400 × 127 × 75 mm

Condition: ready for operation (used), total height: 2,855 mm, total length: 6,202 mm, total width: 3,445 mm, empty load weight: 11,800 kg, Movement of table: 1610 mm (manual) / 1420 mm (hydraulic) Vertical movement: 850 mm Transverse movement: 750 mm Max distance between table and grinding wheel: 750 mm Fanuc touchscreen control Nikken 4th axis Twin rotary diamond disc unit - this unit is mountedvertically with a slide-way adjustment to cater for the differing grind heights. The unit is designed to mount twin opposing discs to support dressing in both directions and provide support for the 6 thou diamond tip radius. Dimensions of the table: 1200 x 600 mm Kdjdpfx Ajytyq Iobnoi Max dia grindingstone: 457 x 100 x 203,2 mm Spindlespeeds: 1400 and up to 3000 rpm Motorpower: 22 kW

Condition: used, Year of construction: 2002, 1 unit surface grinding machine ELB TEB/BV2 Machine bed cracked, operating voltage 3x400V, frequency 50Hz, total connected load 20kW, control voltage 24V/DC, self-dismantling required. Color: as shown, according to photos and inspection Year of manufacture: 2002 Condition: used Storage location: production hall Payment method: advance payment by bank transfer Kdodsytp Uvopfx Abnsi Shipping: collection only from location in Regensburg

Condition: used, Year of construction: 2020, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2020 Control : Sonstige Grinding length : 600 mm Grinding width : 400 mm Spindle: Speed:1.400 rpm Power:3,7 kW Grindingwheel dimensions:300 x 50 x 76,2 mm Workingtable: Clamping surface:Magnettable, 600 x 400 mm Tableloading (max.):600 kg Tabledrive:Hydraulic Tablemovement:200 - 650 mm Kedpfx Ajytlfdsbnsdi Rapid travers:28 m/min Grindingarea:600 x 400 x 375 mm Equipment/Accessory: Measuringsystem:Motormeasuringsystem Dressingunit:Singlecorndiamant Coolingmanagement:Cooling unit with paperbeltfilter, Tank capacity 140 l Further accessory:Workingarea enclosure (partly), Working area lamp

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, grinding length: 400 mm, grinding width: 150 mm, JUNG JF 415 Jung JF 415 Surface Grinding Machine with Flanges and Coolant Belt Filter * Table length: 400 mm * Table width: 150 mm * Maximum grinding length: 400 mm * Maximum grinding width: 150 mm * Maximum workpiece weight: 75 kg * Distance spindle to table: 400 mm Kedpeytfbfjfx Abnedi * Table speed: 1–24 m/min * Grinding wheel diameter: 25 mm * Spindle speed: 900 – 4500 rpm * Heidenhain digital readout * Year of manufacture: 1990, machine no.: 1566

Condition: ready for operation (used), empty load weight: 10,000 kg, table dimensions: 1250 x 506 mm Worklength with magnetic table: 1800 mm Grindingwidth: 500 mm Kodsyr Tgyjpfx Abnedi Longitudinal travel X-axis (autom.): 1800 mm Cross-travel Y-axis (autom.): 500 mm Dimensions magnetic table: 1250 x 506 mm Max dia grindingstone: Ø 400 mm

Condition: good (used), functionality: fully functional, SINUS – Magnet by JUNG model HF 50 RD Width x Depth: 450 x 175 mm Kdsdpeyr Rfmofx Abnsi Pitch: 9 mm

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 193090635, grinding length: 650 mm, grinding width: 375 mm, grinding height: 375 mm, table load: 320 kg, overall weight: 4,000 kg, No reserve price - guaranteed sale to the highest bidder! Bidding obligates you to collect the item punctually between 04.05.26 and 07.05.26. TECHNICAL DETAILS Grinding area: 650 x 375 x 375 mm Table clamping surface: 1,100 x 370 mm Table longitudinal travel: 100 - 850 mm Table load capacity: 320 kg Table feed: 1 to 30 m/min Kdsdpfx Abeyr N Elsnsi Table intermittent feed: 3 to 30 m/min Distance from table to spindle center: 525 mm Vertical feed rate: 2 - 180 mm/min Z-axis cross travel: 350 mm Magnet dimensions: 600 x 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,400 x 2,800 mm Weight: 4,000 kg External reference: 67

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1051.0158, grinding length: 600 mm, grinding width: 300 mm, table length: 600 mm, table width: 250 mm, overall weight: 2,000 kg, No minimum bid – guaranteed sale to the highest bidder! Placing a bid obliges the buyer to timely collection between 04/05/26 and 07/05/26. TECHNICAL DETAILS Grinding length: 600 mm Grinding width: 300 mm Grinding wheel diameter: 250/300 mm Clamping surface: 600 x 250 mm Magnet dimensions: 550 x 200 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,800 x 1,500 x 1,800 mm Weight: 2,000 kg Ksdpfxjyr Nwhj Abnodi External reference: 65

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 23220702, grinding wheel diameter: 300 mm, table length: 820 mm, table width: 350 mm, overall weight: 3,500 kg, controller model: SIEMENS SINUMERIK, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine within the specified period between 04.05.26 and 07.05.26. TECHNICAL DETAILS Grinding area: 600 x 350 x 375 mm Max. grinding wheel diameter: 300 mm Table dimensions: 820 x 350 mm Magnet dimensions: 600 x 350 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK Operating voltage: 3 x 400 V Kdjdpfjyr Nqnjx Abnoi Frequency: 50 Hz Rated current: 35 A Connected load: 7 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,400 x 2,300 mm Weight: 3,500 kg EQUIPMENT Magnetic chuck MPM balancing device External reference: 61

Condition: used, Year of construction: 1988, 1 piece Okamoto PSG84UDX surface grinding machine Max. grinding area: 800 x 400 mm, 380V, 50Hz, with various accessories and storage rack, as per photos and inspection, self-dismantling required Color: grey Year of manufacture: 1988 Condition: used Kdedpfjyr H Nbjx Abnoi Storage location: production hall / right Payment method: advance payment via bank transfer Shipping: Collection only – shipping is not offered for this item!

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 21240, grinding length: 600 mm, grinding width: 375 mm, grinding height: 375 mm, table load: 300 kg, rotational speed (max.): 2,800 rpm, rotational speed (min.): 1,400 rpm, space requirement height: 2,650 mm, space requirement length: 3,800 mm, space requirement width: 2,300 mm, Equipment: documentation/manual, Elb-Schliff Optimal 6375 Kdodpfx Aeyr D Twebnsi A well-maintained and fully functional grinding machine with accessories is offered: • With integrated grinding wheel dresser • 4 grinding wheels with different grain sizes as well as a diamond grinding wheel • Various flap blocks for grinding smaller workpieces • 1 grinding vise • Grinding wheel balancing device • Wiring diagram and documentation

Condition: good (used), Surface Grinding Machine Stock number: 3085 Brand: Geibel & Hotz Year of manufacture: 2015 Machine number: 4051 1015 Model: FS 640 Z CB Grinding length: 600 mm Grinding width: 400 mm Distance table to spindle centre: 140 to 725 mm Table load capacity: 600 kg Magnet: 600 x 400 mm Table longitudinal travel: 200 to 650 mm Kjdpfoyryf Njx Abnedi Table drive: via toothed belt Table speed: 5 to 35 m/min Vertical drive: electromechanical with ball screw Vertical feed speed: 50 to 4,000 mm/min Smallest feed increment: 0.001 mm Measuring system: motor measuring system Max. cross travel: 400 mm Drive: ball screw with backlash-free toothed belt Cross feed speed: 50 to 2,000 mm/min Cross adjustment: electric handwheel and direction pressure buttons Vertical feed speed: 50 to 2,000 mm/min Measuring system: motor measuring system Grinding spindle: 7 kW Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding wheel speeds: 600 to 3,180 rpm Equipment: separate control cabinet, partial enclosure Note: Machine is supplied without magnetic separator and coolant system, was previously connected to a central system at the company. Condition: Machine can be inspected under power, video available via WhatsApp Connection: 15 kW Machine weight: 2.4 t Machine dimensions: 3,300 x 2,000 x 2,200 (+800) mm

Condition: used, Year of construction: 1982, grinding length: 600 mm, grinding width: 550 mm, total height: 2,490 mm, feed length X-axis: 600 mm, feed length Y-axis: 470 mm, feed length Z-axis: 600 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, table length: 1,100 mm, table load: 400 kg, table width: 450 mm, grinding wheel width: 100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 1,400 rpm, overall weight: 5,300 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 1,400 rpm, rotational speed (min.): 1,400 rpm, grinding spindle speed: 1,400 rpm, disc diameter: 400 mm, space requirement height: 2,490 mm, We are offering this used ELB-Schliff Oprimal 3 ND surface grinding machine, year of manufacture 1982. Maximum grinding length: 600 mm Maximum grinding width: 550 mm Working height with new grinding wheel: 400 mm Working height with worn grinding wheel: 600 mm Spindle taper ratio: 1:5 Manual vertical travel of grinding spindle: 600 mm Manual horizontal travel of grinding spindle: 470 mm Swivel range grinding spindle: 1° Kodpfx Ajyrn Sdsbnodi Clamping table surface: 1100 x 450 mm Small table stroke: 80 mm Number of T-slots: 1 T-slot width: 16H7 mm Cross feed (table): 470 mm Longitudinal feed (table): 600 mm Table load capacity: 400 kg Outside diameter of grinding wheel: 400 mm Inside diameter of grinding wheel: 127 mm Grinding wheel thickness: 100 mm Recess 1 diameter: 190 mm Recess 1 thickness: 20 mm Recess 2 diameter: 190 mm Recess 2 thickness: 30 mm Machine height: 2.49 m Weight: 4700/5300 kg Direct spindle speed: 1400 min⁻¹ Continuous feed rate, grinding spindle carriage: 1.2 m/min Intermittent feed rate, grinding spindle carriage: 3–60 mm Hydraulic table feed speed: 1–30 m/min If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Horizontal surface grinder in almost new condition with few operating hours! Operating hours: see image Technical details grinding length 600 mm grinding width 400 mm workpiece height 400 mm weight of the machine ca. 4,5 t dimensions of the machine ca. 3400 x 2647 x 2203 mm Okamoto Touch Screen Control Travel X-axis: 600 mm Travel Y-axis: 22.5 - 497 mm Travel Z-axis: 400 mm Speed range rpm: 1-2800 (stepless) Rapid traverse mm/min: 4000 Main drive kW: 7.5 Maximum table load in kg: 1000 Accessories: - Electro-permanent magnetic clamping plate: 400 x 600 P13 mm, height 80 mm (make Wagner) - 2 grinding wheel flanges Kdsdpfoyrnn Ejx Abnei - Table dresser - Automatic straight dresser, spindle box mounted - Automatic compensation of the wheel dressing amount - Automatic central lubrication - Ball screw in the Y and Z axes with AC servo motor and measuring system - Coolant system with belt filter system