Msi

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2 6750 007, type of input current: three-phase, input voltage: 400 V, We are offering this used WAFIOS AF 750 centering and end-finishing machine, year of manufacture 2002. Type: AF 750 Machine No.: 2 6750 007 Hjdpfx Adsx Srnqs Nsng Year of manufacture: 2002 Drawing No.: 6750 2 9000 07 Voltage: 3~ 400 V Frequency: 50 Hz Control voltage DC: 24 V Control voltage AC: 230 V Current: 35 A Fuse: 50 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Machine for centering shafts, etc. 2 units available. 1x manufacturer Inpro, 1x manufacturer unknown. Both machines are operational and ready for immediate use. Sale price per machine: 1x €2,000, 1x €2,500. Hedpfx Aex Rb Ahsd Nsng

Condition: ready for operation (used), Year of construction: 1998, A complete edge processing line Julius is available. Tensile strength range: 600N-2000N/mm², strip width range: 10mm-250mm, strip thickness range: 0.35mm-2.2mm, max. strip speed: 160m/min, max. coil weight: 2500kg, max. inner coil diameter: 400mm, max. outer coil diameter: 1400mm. Documentation available. An on-site inspection is possible. Hnjdpfx Aoxxzined Neg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, power: 24 kW (32.63 HP), pressure (max.): 120 bar, TECHNICAL DETAILS Minimum dimensions for double-sided machining: Diameter 12 mm, Length 200 mm Maximum dimensions for double-sided machining: Diameter 50 mm, Length 800 mm Minimum dimensions for single-sided machining: Diameter 12 mm, Length 75 mm Maximum dimensions for single-sided machining: Diameter 70 mm, Length 500 mm Cutter diameter: max. 140 mm Tool holder: SK40 Workpiece clamping: Hydraulic centering vice MACHINE DETAILS Hodjxxkd Ispfx Ad Neng Performance Data Power: 24 kW Voltage: 400 V Frequency: 50 Hz Max. pressure: max. 120 bar EQUIPMENT Horizontal end machining center Simultaneous double-sided end machining of shaft-shaped parts

Condition: good (used), Cutting / Centering Machine UMA SZM 100 E Year of manufacture: 1976 Serial No.: 33-0241 Clamping range: 10–160 mm Diameter for facing up to 100 mm Clamping length: 90–1950 mm Hjdpfx Adsxt Dzpj Njng Drill spindle: ISO40 DIN2079 2 clamping fixtures - Special program for internal threading with reverse feed and spindle reservation as a second program in automatic mode - Automatic triple chip-breaking for deep drilling - 2-edge positive tool head with 12H7 keyway for overcutting holders with 2 carbide indexable inserts SPGN 190 (DIN4968), with holder for centering drill R4.0 mm The machine was in use until recently and is fully operational. Price: net, ex stock, loaded.

Condition: good (used), Year of construction: 2013, E.Büker - Type N76 End Finishing Machine / Beveling Machine - Working range: 6 - 76 mm - Speed: 10-1800 rpm Hnodpoxnlnmsfx Ad Njg - Power: 0.75 kW - Base frame - Emergency stop Dimensions: LxWxH 0.7x0.5x1.4 meters / Weight 250 kg Errors and input mistakes excepted

Condition: good (used), Centering Machine - KUHN KAZ 80-2 - Max. workpiece diameter / round: 80 mm - Max. workpiece diameter / square: 60 mm - Centering length: endless - Clamping unit with self-centering vise - Spindle drive: 1.8 kW - Drill chuck - Chip tray - Power cable Hodpfx Adexcmhws Nsng - Forklift slots for transport Dimensions: LxWxH 1.7x0.7x1.4 meters / Weight 600 kg Subject to errors and input mistakes.

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem Hnjdpfx Adoxb Ucas Nog No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: used, Year of construction: 1961, max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length 0 mm total power requirement 0 kW weight of the machine ca. 3 t Hnedpswwl I Iofx Ad Neg dimensions of the machine ca. 0 m The UMA was built in 1961 and the guides have been rebuilt.

Condition: used, Year of construction: 2014, Technical details: workpiece diameter - max.: 120 mm workpiece length: 403 mm spindle speed:: 750 / 1333 U/min workpiece diameter - max.: 120 mm workpiece diameter - min.: 25 mm workpiece length - min.: 117 mm workpiece length - max.: 400 mm work stroke: 40 mm Hnsdovxrwmepfx Ad Nsg total stroke: Einheit fest: 140 mm total stroke: Einheit verstellbar: 320 mm compressed air: 6 bar total power requirement: 4 kW weight of the machine ca.: 0,980 t voltage: 3x400V / 50Hz V dimensions L x W x H: ca. 2,1 x 0,8 x 2,1 m This is a centering and drilling machine that was specially designed for one of our customer's production concepts. Functional principle: The shafts are inserted by hand in the central area and then clamped at the touch of a button, after which drilling heads move simultaneously on both sides of the shaft and drill centering holes. 2x drilling heads (right/left) with tool holder/clamping fixture Mapal clamping cartridge, center height = 220 mm (machine currently equipped with collet chuck and centering drill) Clamping range max./min.: Ø 120mm / Ø 25mm via pneumatic cylinder, manual material feed Equipment: Grid enclosure EMERGENCY OFF *

Condition: new, Year of construction: 2024, functionality: fully functional, Clamping range 25 mm ID to 120 mm OD Electric drive: 1050 W, 230 V, 50 Hz Hodpfxjvr Ec As Ad Neng Speed of the tool carrier unloaded 150 rpm, nominal 70 rpm Clamping with wrench Tool feed by hand Weight approx. 6.5 kg Incl. operating instructions In wooden box Incl. 1 planing knife 90 ° and 2 chamfering knives 30 °

Condition: used, Year of construction: 2000, max. workpiece diameter 40 mm min. workpiece diameter 10 mm workpiece length 200 - 640 mm Control SPS Siemens S5 95 U total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 8,5 x 2,8 x 2,35 m Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools. Machine consisting of: - Basic machine model TR 60/4-650, passage 640 mm - Bar magazine for bar lengths 2 - 3.5 m - Normal version for solid material up to ? 40 mm - Central position of the bar feed rollers - Bar feed unit - Feed gripper in standard version - Cross switch with 4 clamping stations model TR 300.00 - 4 base jaws, width 80/140 mm, contact ? 75 mm - Swiveling cross switch in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic. Clamping - Saw blade guide - Processing unit no. 1 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 3 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 - USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Unloading chute - Millimeter bars for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Pressure accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and container - Coolant pump CALPERA - Electrical equipment in separate electrical control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U Hnodevp Sd Iopfx Ad Nsg - Machine light - Flashing light to signal machine downtime - Central lubrication - Chip conveyor. In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for € 25.000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates the whole operating hours at around 24,000. Machine under power in sellers factory. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Suitable for facing, internal and external chamfering - machine in very good condition and with lots of accessories! TECHNICAL DETAILS Workpiece diameter: 25 - 80 mm Workpiece length: 50 - 1,200 mm Workpiece weight (max.): 12 kg Control: Siemens PLC Tool holder: HSK 63C Spindle speed: 350 - 12,000 rpm Working height: 1,000 mm Axial movement of the milling spindle (automatic/manual, max.): 300 mm MACHINE DETAILS Total power requirement: 26 kW Hsdpfevpgtqox Ad Nsng Machine weight: approx. 6.8 t Space requirement: approx. 7.7 m x 2.9 m x 2.1 m EQUIPMENT - 1 workstation - 2 spindle units. - Feed belt - Discharge belt - Fully automatic process flow

Condition: used, Year of construction: 1991, Technical details: workpiece diameter - max.: 8 - 50 mm workpiece length: 5 - 500 mm spindle speed:: 100 - 1000 U/min workpiece diameter - max.: Ø 50 / Vollmaterial mm workpiece diameter - min.: Ø 8 / Vollmaterial mm workpiece diameter - max.: Ø 70 / Rohr mm workpiece diameter - min.: Ø 8 / Rohr mm wall strength: 1 - 10 mm centre height: 300 mm spindle hollow: Ø 90 mm cut-off length with swivable stop min/max.: 5 - 500 mm total power requirement: ca. 25 kW weight of the machine ca.: Anfrage t dimension machine xH: 5.,8 x 1,5 x 1,7 m dimensions electric cabinet: 1300x450x1950 mm dimensions L x W x H: panel de control: 0,36 x 0,30 x 0,68 m dimensions L x W x H: alimentación de material: 5,5 x 0,95 x 1,15 m Facing and Centering Machine (Manufacturing process cut to length and deburring possible) Other features: - turning speed of the parting head infinitely 100 - 1000 U / min. - speed end machining 4 wheelsets with speed from 52 - 1320 rpm. - feed push-off head continous, 0 - 0.3 mm / rev, hydraulic - feed deburring device feed infinitely 0 - 175 mm / sec. - feed head 0 - 0.03 mm / rev, continous Hodpfxsu Iww Uo Ad Njng - material supply speed 170 mm / sec. Operation is via operator panel / control panel i.D. *

Condition: good (used), Manufacturer: AXA Type: HFB 600 Control system: Siemens 840D Solutione Line Year of construction: 2015 Specifications: Metric Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 7800 mm width 2300 mm height 2250 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Hsdpfet Tdp Tsx Ad Nong Finishing of sealing surfaces The finishing of the sealing surfaces of the approx. 17m long tubes is done by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors or measuring probes. The work piece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the swimming jaw once it lies at a right angle and centric to the facing slide head. The interchangeable measuring sensors calculate how to process the surface whic

Condition: used, Year of construction: 1975, workpiece diameter 8-125 mm grinding depth 130 mm clamping length 50-1100 mm max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length mm total power requirement 1 kW weight of the machine ca. 500 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _____ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. Hedpfx Aot Hwuvsd Nsng * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer workpieces. Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, saving crane capacity, man hours and energy energy are saved If machines are in use, you have to crane to the machine and then back again Hsdpfx Aori Sicjd Nsng to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, - 2 rechargeable batteries - complete in case - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m

Condition: reconditioned (used), Year of construction: 1985, In 2020, the machine was extensively overhauled for €7000. Proof available. Working processes: - 60° chamfering - longitudinal turning up to maximum 40 mm - Center drilling Work process fully automatic: - Clamping, chuck closed - rapid traverse forward - Work feed - Dwell time for cutting out - Rapid traverse back - Unclamp, chuck open Technical data: max. workpiece diameter round 80 mm max. workpiece diameter hex-SW 70 mm min. workpiece diameter round and hex 10 mm min. Workpiece length 450 mm Speed range stepless Stage I/Stage II = 51-306/102-612 Hnjdpfxeiamn So Ad Nsg Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1,3/1,8 Motor power coolant motor kW 0,07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Condition: good (used), Year of construction: 1991, Saw Blade Chamfering Machine Hsdpfx Ajhwixdjd Nong Manufacturer: Loroch Model: AK Year of manufacture: 1991 For chamfering HSS and segmental circular saw blades 161225ä

Condition: excellent (used), Year of construction: 1976, Offered here are centring and facing tools for an Uma countersinking and centring machine of the type SZM 80/800. there are approx. 11 complete sets for 2 side machining available. Please see the pictures for more information. Attention, only the tools are offered, the machine is sold ! Hjdpehfww Iefx Ad Neng Purchase complete or in sets on request. The tool holder is specially designed for UMA SZM machines.

Year of construction: 1972, condition: used, This machine is 3x available. Data: Manufacturer: Landis Type: FRM 50 E-8 Year of manufacture: 1972 

quill travel: approx. 100mm

 Distance between spindles in retracted position: approx. 550mm Workpiece diameter max.: 75mm travel: per unit 200mm 3 drive powers:
 8,5kW/ 750 1/min 12kW/ 1450 1/min Hnodpfx Asg Umitsd Nog 18kW/ 2960 1/min Remark: the machine is equipped for ø20 and 65mm long Accessories: with magazine

Condition: new, Semi-automatic chamfering machine Development and production in England - Automatic chuck with material sensor - automatic spindle start when the cutting head moves - bar diameter 26-105 mm a 2nd cutting head is required for smaller diameters - adjustable bar support - max. chamfering/turning length 45 mm - Overturning & chamfering tool - precision three-jaw chuck Hodpjgkah Tjfx Ad Neng - large chip collector for easy cleaning - easy to move with pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year guarantee CE - certified OPTION: - adjustable fence + universal chamfering tool € 1.870,-

Condition: new, Manual chamfering machine Development and production in England - Variable adjustment of spindle speed - max. bar diameter 26-105 mm a 2nd cutting head is required for smaller diameters - Adjustable bar support - max. chamfering/turning length 45 mm - Overturning & chamfering tool - precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year guarantee CE - certified OPTION: Hedpfogi Rnwsx Ad Nsng - adjustable fence + universal chamfering tool € 1.870,-

Condition: new, Automatic chamfering and starting machine Development and production in England - CNC Mitsubishi control M70 - automatic start of the cycle - automatic switch-off for repeatable chamfering lengths - color touch screen control panel - max. spindle speed 3,000 rpm - bar diameter 8-80 mm - hydraulic 3-jaw chuck - cutting head suitable for all material sizes - quick-change ISO cutting inserts - max. chamfering/ turning length 37 mm - 4 kW motor - high-precision Mitsubishi servo drive - Ball screw drive with high thrust capacity - Large machine door Hnjdpfx Ajcb E Hnsd Neg - Internal, powerful LED work light - Spoke collection container with external spoke basket - Lifting points for pallet truck - Weight 500 kg - Dimensions L/W/H 1000x600x1200 mm CE - certified OPTIONS - Oiling (oil mist): € 2.890,- - Universal chamfering head: € 1.040,- - 8kW motor for hard materials: € 4.150,-

Condition: new, Semi-automatic chamfering machine Development and production in England - Automatic chuck with material sensor - automatic spindle start when the cutting head moves - max. speed 1,500 rpm - max. bar diameter 80 mm - bar support adjustable - max. chamfering/turning length 37 mm - precision three-jaw chuck - large chip collector for easy cleaning - easy to move with pallet truck - weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - Oil cooling (mist) € 3.250,- Hedpfxocacn Eo Ad Njng - adjustable fence + universal chamfering tool € 1.870,-