Stankogroup

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 4,000 rpm, bar diameter (max.): 65 mm, number of axes: 9, This 9-axis Muratec MT200 multi-spindle turning machine was manufactured in 2019. It features a maximum bar capacity of 65 mm and a chuck size of 210 mm. The machine includes an impressive maximum feed speed of 24 m/min on the X-axis and 36 m/min on the Z-axis. If you are looking to get high-quality turning capabilities, consider the Muratec MT200 machine we have for sale. Contact us for further details. • Chuck size: 210 mm (8 inch) • Maximum swing: 205 mm (15 stations) / 228 mm (12 stations) • Maximum bar capacity: 65 mm (standard) / 80 mm (option) • Turret stations: 15 (upper and right) / 12 (lower) • Bar diameter: 65 mm (Standard) / 80 mm (Option) • Axis stroke (2-turret): • Upper turret: X 220 mm, Z 770 mm, Y +/- 40 mm • Lower turret: X 200 mm, Z 770 mm, Y +/- 40 mm • Right spindle (Zs): 880 mm • Maximum feed speed: • X axis: 24 m/min • Z axis: 36 m/min • Y axis: 12 m/min • Live tooling motor: 14.0 kW max (4.8 kW continuous) • Live tooling max speed: 4500 rpm • Spindle positioning: C axis control (+/- 0.015 degrees) Additional equipment Ksdpfxeyvuxye Abnodi • Gantry loader capacity: 140 mm x 105 mm (3 jaw), up to 8.0 kg x 2 (option) • Parts catcher capacity: 65 mm x 160 mm, 2.5 kg Technical Specification Counter Spindle Yes

Condition: excellent (used), Year of construction: 2011, The grinding machine is in very good condition and fully operational. Kdedpfx Absyuyucensi

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43, turning diameter over cross slide: 32 mm, number of spindles: 6, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Swing diameter over cross slide: 32 mm Max. spindle speed: 3,150 rpm Number of spindles: 6 Round bar capacity: 32 mm Square bar capacity: 22 mm Kodpjyuxq Asfx Abnedi Hexagonal bar capacity: 27 mm Max. bar feed: 125 mm Max. travel long slide: 100 mm Maximum number of parts: 35 Machining speed: from 1.12 s to 125 s Spindle speeds: from 200 rpm to 3,150 rpm Number (steps): 49 Machining time: from 0.63 s to 200 s MACHINE DETAILS Voltage: 50 Hz, 3x 380 V Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 3,850 x 1,390 x 2,200 mm Weight: approx. 8,000 kg EQUIPMENT Knoll AE 1114 high-pressure system Filtration system 5-bar and 40-bar pumps individually adjustable for processing stages Plate heat exchanger Lifting pump for chip conveyor

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Max. bar diameter : 20 [mm] - Spindle speeds : 3500 [rpm] - Spindle power : 15 / 18.5 [kW] COUNTER-SPINDLE - Counter-spindle position : 8 - Max. bar diameter : 20 [mm] - Travel : 160 [mm] - Max. part length : 75 [mm] - SLIDES - Number of transversal slides : 3 * Position : 1 / 8 / 9 * Stroke x, position 1 : 50 [mm] * Stroke X, position 8/9 : 65 [mm] - Number of crossed slides : 6 Kedpfxoyt Sl Rj Abnedi * Position : 2 / 3 / 4 / 5 / 6 / 7 * Stroke X x Z1 : 50 x 80 [mm] - Number of longitudinal slides : 1 * Position : 8 * Stroke Z2 : 160 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9600 x 2500 [mm] - Machine height : 2200 [mm] EQUIPMENT - CNC : FANUC PNC DECO - Chips conveyor - Coolant tank - Bar loader : Tornos

Condition: used, TORNOS MULTIDECO 20/6b is a CNC Multi-spindle turning lathe engineered for high-precision machining with excellent accuracy and reliability. Key capacities: 17 axes total, 6 cross slides, 5 plain turning slides, longitudinal carriage way 160 mm, 6 spindles + 1 back spindle, round bar capacity Ø 5–20 mm, max workpiece length 100 mm, production rate 45 pcs/min. Technical specs: stepless spindle speeds up to 5000 rpm, spindle power 15 kW, total installed power 43 kVA, supply 3x 400 V 50 Hz, machine weight ≈8500 kg, dimensions L3500×W1600×H1950 mm. Equipment: ROBOBAR bar feeder type MSF 522/6, coolant system, chip conveyor, pick-up spindle, spindle stop device, lamp and status light. Delivers tight tolerances; suitable for automotive, watchmaking, toolmaking, aerospace and medical industries. Kedpjytuxmefx Abnedi

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 63 mm, rotational speed (max.): 3,750 rpm, overall weight: 6,800 kg, drilling depth: 63 mm, The machine comes complete with collets, holders, and other accessories! TECHNICAL DETAILS Max. turning length: 63 mm Max. drilling depth: 63 mm Kdedpfx Aoytf Ekobnsi Max. workpiece passage: 26 mm Max. workpiece feed: 125 mm Spindle speed range turning: 236 - 3,750 rpm Spindle speed range thread cutting: 13 - 1,875 rpm MACHINE DETAILS Required floor space: 7.16 x 2.3 m Height: 2 m Weight: 6,800 kg EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides 4 change gears for main and feed drive Service tools

Condition: used, Year of construction: 2009, 2009 MURATA MURATEC MD 120 CNC 2-Spindle 2 Turret Precision Lathe with Fanuc FS31i Model A, Distance between Spindles 340mm, Max Turning Diameter Ø120mm, Max Turning Length 75mm, X Axis Travel 130mm, Z Axis Travel 145mm, Rapid Feed X-Z 24m/min, Spindle Speed 45 - 4500rpm, Spindle Power 11kw, Tools Turret N. 2 x 10 Driven Positions, Loading Stations N. of 2, Loader X Axis Left 200mm - Right 1600mm, Loader Y Axis 550mm, Loader Z Axis 155mm, Weight 4500kg, Chip Conveyor. S/No. 00184 (2009) Kdsdpfjyrdv Esx Abnei Loading is free of charge to a suitable vehicle. Location: These lots are located in Brescia, Italy.

Condition: used, Year of construction: 2000, Technical details: number of spindles: 6 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2000 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm pick-up unit, Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Kdsdsyqwvispfx Abnoi Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Kdjdpfx Abeyqv N Ionji If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2001, Technical details: number of spindles: 6 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm Kdsdpeyqvlvjfx Abnji Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2003, Technical details: number of spindles: 6 spindle passage: 36 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=36mm!!! Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images; various collets are included in delivery up to D36mm Please, contact us for getting more information and pictures on mail(at) or Kdsdpeyqpqxofx Abnei *

Condition: good (used), Year of construction: 2006, Year of manufacture: 1998 to 2006 Kdedpfxsypltgo Abnoi Available from current location

Condition: good (used), Year of construction: 1992, At site. Year of manufacture: 1982 to 1992. TYPES: SF 32 DNT, AF 32, AF 26, AF 26 DNT, AF 32, SF 32, SF 51. Kjdpfx Aoyplpnsbnodi

Condition: used, Year of construction: 2002, SCHÜTTE SG 18 Max. bar diameter round / square: 18 / 13 mm Spindle pitch circle diameter: 180 mm Bar feed: 80 mm Longitudinal slide travel (total / working): 63 / 50 mm Cross slide travel (total / working): 32 / 20 mm Spindle speeds (stepless): 800 – 10,000 rpm Main times (stepless): min. / max. 0.24 – 45 s Secondary times: 0.30 s Main drive: 11 kW Feed motor torque: 18 Nm Dimensions (incl. bar guide): approx. L x W 5.5 x 1.3 m Weight: approx. 5 t Voltage: 400 V / 50 Hz Operating hours: 14,304 h Scope of delivery: Bar feeder Pra 52 P IEMCA Ksdpfxsymdd So Abnsdi RUEZ KF0WW2/312 DAS, year 2002

Condition: used, Year of construction: 1994, INDEX MS 25E Max. bar diameter round / square: 26 / 18 mm Spindle pitch circle diameter: 230 mm Max. bar feed: 100 mm Longitudinal slide travel (total / working / adjustment): 85 / 50 / 330 mm Cross slide travel (total / working / adjustment): 36 / 16 / 20 mm Spindle speeds (12 / 24 steps with 1.25 / 1.12): 366 – 5,020 rpm Main drive: 15 kW / 1,450 rpm Kedpfxeymdche Abnjdi Voltage: 400 V / 50 Hz Operating hours: 62,283 h Working hours: 4,916 h Dimensions (incl. bar guide): approx. L x W x H approx. 7 x 1.5 x 2 m Weight: approx. 6 t Scope of delivery: Machine INDEX MS 25E

Condition: used, Year of construction: 2000, INDEX MS42C Max. bar diameter: 42 mm Spindle pitch circle diameter: 320 mm Main spindle: - Power clamping with INDEX spring-loaded hollow clamping cylinder and collet - Max. clamping stroke: 4 mm - Actuation force: 26 kN Main spindle drive: - Rated power: 5 kW - Rated speed: 1,500 rpm - Rated torque: 32 Nm - Max. speed: 5,000 rpm Synchronous spindle and driven tool holder: - Rated power: 5.3 kW - Rated speed: 1,500 rpm - Rated torque: 34 Nm - Max. speed: 5,000 rpm Cross slides: - Max. number: 10 - Travel (X): 70 mm - Travel (Z): 140 mm - Max. feed force +X: 11.4 kN - Max. feed force −X: 7.9 kN - Max. feed force +Z: 11.4 kN - Max. feed force −Z: 7.9 kN - Rapid traverse speed: 15 m/min Longitudinal spindles: - Quantity: 6 - Travel (Z): 240 mm - Max. feed force +Z: 15.1 kN - Max. feed force −Z: 11.6 kN - Rapid traverse speed: 15 m/min Cross slides for longitudinal spindles: - Max. number: 6 - Travel (X): 70 mm - Max. feed force +X: 11.4 kN - Max. feed force −X: 7.9 kN - Rapid traverse speed: 15 m/min Synchronous spindle: - Clamping system: spring-loaded clamping cylinder - Max. clamping diameter: 42 mm - Chuck outer diameter: 112 mm - Jaw stroke: 1 mm Ksdpfxoymc S Uj Abnodi - Max. total clamping force: 13 kN Weight: approx. 11,000 kg Scope of delivery: - Hydraulic unit KNOLL KTS 32-48-T - Bar loader CUCCHI PLURIMANDRINO, year 2000 - Workshop cabinet with machine accessories - KNOLL VRF 500 - Chip conveyor KNOLL 400 S-1/250

Condition: used, Year of construction: 2007, operating hours: 26,721 h, number of spindles: 6, spindle speed (max.): 10,000 rpm, bar diameter (max.): 22 mm, total width: 1,800 mm, total length: 3,200 mm, total height: 2,850 mm, travel distance X-axis: 62 mm, travel distance Y-axis: 12 mm, travel distance Z-axis: 85 mm, overall weight: 6,500 kg, Working spindles: Quantity: 6 Maximum bar diameter: 22 mm Spindle pitch circle diameter: 230 mm Travel distances X / Z: 62 / 85 mm Rapid traverse speed: 15 m/min Synchronous hollow spindle drives: Quantity: 6 Maximum speed: 10,000 rpm Nominal speed: 8,300 rpm Power: 15 kW at 18 Nm Chuck diameter: 110 mm Swiveling synchronous spindles: Quantity: 2 Z-axis travel: 120 mm Feed force: 2.5 kN Rapid traverse speed: 15 m/min Swiveling angle: 132° Counter spindle: Maximum speed: 10,000 rpm Nominal speed: 8,000 rpm Power: 9.2 / 12 / 14 kW at 11 Nm Tool carriers: Kdsdpfx Aoymaw Ijbnei Maximum quantity: 11 Travel distances X / Y / Z: 62 / ± 12 / 85 mm CNC control: C 200-4D (Siemens Sinumerik 840D) Dimensions: approx. L x W x H 3.2 x 1.8 x 2.85 m Weight: approx. 6.5 t Operating hours: 61,997 h Working hours: 42,235 h Scope of delivery: - INDEX bar loader - Bar loader IEMCA SIR MS22 P, year 2008 - Coolant unit with belt filter - Chip conveyor KNOLL 400 S-1/290 - Coolant filter unit KNOLL FKA/1780 RSF 100 - Workshop cabinet with machine accessories

Condition: used, Year of construction: 2015, operating hours: 26,721 h, number of spindles: 6, spindle speed (max.): 10,000 rpm, bar diameter (max.): 22 mm, total width: 1,800 mm, total length: 3,200 mm, total height: 2,850 mm, travel distance X-axis: 62 mm, travel distance Y-axis: 12 mm, travel distance Z-axis: 85 mm, overall weight: 6,500 kg, number of tool stations in tool turret 3: 11, INDEX MS 22C Working spindles: Number: 6 Maximum bar diameter: 22 mm Spindle pitch circle diameter: 230 mm X / Z axis travels: 62 / 85 mm Rapid traverse: 15 m/min Synchronous hollow spindle drives: Number: 6 Maximum speed: 10,000 rpm Nominal speed: 8,300 rpm Power: 15 kW at 18 Nm Chuck diameter: 110 mm Swiveling synchronous spindles: Number: 2 Z axis travel: 120 mm Feed force: 2.5 kN Rapid traverse: 15 m/min Swiveling angle: 132° Kdedpfx Abeyl U Npsnsi Counter spindle: Maximum speed: 10,000 rpm Nominal speed: 8,000 rpm Power: 9.2 / 12 / 14 kW at 11 Nm Tool carriers: Maximum number: 11 Travels X / Y / Z: 62 / ±12 / 85 mm CNC control: C 200-4D (Siemens Sinumerik 840D) Dimensions (approx.) L x W x H: 3.2 x 1.8 x 2.85 m Weight (approx.): 6.5 t Operating hours: 26,721 h Machine hours: 20,859 h Scope of delivery: INDEX bar loader Coolant unit with belt filter

Condition: repair required (used), 3x SCHÜTTE SF40 offered as a package at a low price – machines require overhaul Kdedpfx Aboylhp Njnsi

Condition: used, 2x 6-spindle bar automatics as a package Make: INDEX Model: MS25E (1 machine defective, used as a parts donor) Kdjdeylhlqjpfx Abnei

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 68-3-2329, spindle speed (max.): 855 rpm, spindle speed (min.): 137 rpm, turning length: 225 mm, disc diameter: 317 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obliges the buyer to collect within the timeframe 08.04.26 to 16.04.26. TECHNICAL DETAILS Spindle speed range: 137 – 855 rpm Ksdpfx Aboyk A Htsnedi Maximum material feed: 260 mm Maximum turning length: 155/225 mm Drive pulley diameter: 317 mm Drive pulley width: 170 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 7000 x 2000 x 2500 mm Machine weight: 18 t Operating voltage: 380V Frequency: 50 Hz Rated current: 120 A EQUIPMENT Configured for 6 spindles

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 67-3-2142, spindle speed (max.): 855 rpm, spindle speed (min.): 137 rpm, turning length: 225 mm, overall weight: 18,000 kg, disc diameter: 317 mm, No minimum price – sale guaranteed to the highest bidder! Kjdpfxeyk Alpo Abnsdi Placing a bid commits you to collect within the period from 08.04.26 to 16.04.26. TECHNICAL DETAILS Spindle speed range: 137 - 855 rpm Maximum material feed: 260 mm Maximum turning length: 155/225 mm Drive pulley diameter: 317 mm Drive pulley width: 170 mm MACHINE DETAILS Operating voltage: 380V Frequency: 50 Hz Rated current: 120 A Dimensions & Weight Dimensions (L x W x H): 7000 x 2000 x 2500 mm Machine weight: 18 t EQUIPMENT Set up for 6 spindles

Condition: used, TECHNICAL DETAILS - Number of spindles : 8 - Number of counter-spindles : 1 - Max. bar feed : 178 [mm] Kdsdjyh Rnqepfx Abnei - Number of cross slides : 8 SPINDLES - Max. bar diameter : 32 [mm] - Spindle speeds : 199-2737 [rpm] - Electromagnetic clutch COUNTER-SPINDLE - Counter-spindle position : 7 POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 6632 X 1357 [mm] - Machine weight : 7950 [kg] EQUIPMENT - CNC : Fanuc Series 0i-TD - Parts catcher - Coolant tank - Bar loader : IEMCA PRA 40/42F - Bar holder and stand

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 32 [mm] - maxi feed length : 178 [mm] - maxi turning length : 63.5 [mm] - number of spindles : 8 - number of cross slides : 8 - electromagnetic clutch - number of spindle speeds : 26 - spindle speed : 199-2737 [rpm] - independent feeds normal strokes : 73 [mm] - dimensions : 6632 x 1357 [mm] - weight : 7950 [kg] EQUIPMENT - Saco hydraulic pick up station 7 - Stock reel and stand - Magnetic swarf conveyor - Fume extractor - Part catcher Kodpfx Aeyh Rm Hebnedi - End of bar catcher - Part conveyor belt - High pressure pump - Part off toolholder station 7 - Drill holder station 8 - Bracket toolholder for center bloc station 1 - Bracket toilholder and drill holder station 1 - CNC cross slide RTECH position 5 : 2 axis with CNC FANUC Oi-TD command - Barloader IEMCA PRA40/42F

Condition: good (used), Year of construction: 2004, Schütte SF51 6-Spindle Automatic Turning Machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle automatic turning machine with a 51 mm spindle bore, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch, which offers high process stability and flexibility in turning, drilling, and tapping. The machine is valued for its stability and flexibility in the production of demanding workpieces. Technical condition: The machine has been regularly modernized and is in like-new condition. Maintenance: Exclusively professional, scheduled maintenance by specialists. Manufacturer: Schütte Type: SF 51 Crank-controlled multi-spindle automatic lathe Number of spindles: 6 main spindles Control: Conventional Spindle bore: 51 mm Maximum feed rate: 125 mm Maximum turning length: 102 mm Maximum drilling depth: 102 mm Tapping unit Chip conveyor 6-station loading magazine Voltage: 400 V Removal by buyer Due to a planned production changeover, a fixed time window for collection has been defined: - Period: Week 13 / 2026 - Date window: March 25, 2026 to March 27, 2026 - Advantage for you: Precise scheduling certainty for your machine transport and commissioning at your plant. All costs for professional dismantling are already included in the purchase price. Kodpfx Absyhpy Uonjdi Item location: 21079 Hamburg "Everything from a single source: We're happy to offer you suitable bank financing for your project." Find more items – new and used – in our shop! International shipping costs on request!