Spindle Box

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 762 x 305 x 406mm, Table 1213 x 267mm, Spindle speed 6,000 rpm, Spindle taper BT40, Spindle Motor 5.6Kw Hp, 10 station toolchanger, Fjdpfx Aoyt Hbtofuspd HAAS Control, low volt light, coolant

Condition: like new (used), Year of construction: 2021, Traverses X Y Z: 710 x 400 x 430mm, Table 800 x 400mm, table load 300kgs, Spindle speed 12,000rpm, Spindle taper CAT40, 5.5kW Spindle motor, FANUC Oi , 20 Station ATC, Fpodoyt E Uxepfx Afuod Coolant, Low Volt light, swarf conveyor

Condition: used, MIKRON HSM 800 ProdMod is a Vertical machining center engineered for precision, high accuracy and reliability. Working capacities: table 900×600 mm, max table load 800 kg; travels X800 × Y600 × Z500 mm. Main specs: spindle motor 12.5/22 kW, total power 26 kW, 3x 400 V 50 Hz, noise 75 dB(A), machine weight ≈8300 kg, dimensions L4000×W3700×H2500 mm. Equipment: 50‑position tool magazine (tool Ø max 75 mm, length 210 mm, max tool weight 2.5 kg). Delivers tight tolerances; typical applications: automotive, aerospace, medical, machine tools and watchmaking. Fpjdpeytu Hkofx Afusd

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: HAAS, total height: 2,700 mm, total width: 2,400 mm, table load: 700 kg, overall weight: 5,000 kg, spindle speed (max.): 7,500 rpm, product length (max.): 2,400 mm, number of axes: 4, This 4-axis HAAS VCE 750 was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 400 mm, and Z-axis travel of 500 mm. The machine includes a table size of approximately 900 x 350 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VCE 750 vertical machining centre we have for sale. Contact us for further details. • Table size: approx. 900 × 350 mm • Tool magazine: 20 positions (carousel) • Included options: 4th axis; through-spindle cooling Technical Specification Fpsdpfxsytqvhs Afuod Taper Size ISO 40

Condition: good (used), Year of construction: 2004, operating hours: 6,679 h, functionality: fully functional, machine/vehicle number: H-30459, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,800 mm, total length: 3,200 mm, total width: 2,200 mm, table width: 510 mm, table length: 1,020 mm, table load: 1,000 kg, overall weight: 4,700 kg, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, HURCO VMX 30 Vertical Machining Center - Spindle nose to clamping table: 152 – 762 mm - Table T-slots (DIN 650): 5 - For further technical data, see photos - With technical documentation - Important note: The machine vices visible on the work table are not included in the scope of supply! - A tool holder package is included in the delivery. Fedpsytny Defx Afuepd Attention: The item must be collected bindingly between 27.04. and 30.04.2026 on a date to be agreed. FCA D-39126 Magdeburg – loaded onto truck

Condition: used, Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, workpiece weight (max.): 1,588 kg, total height: 3,023 mm, total length: 4,089 mm, total width: 3,353 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 8,100 rpm, overall weight: 6,033 kg, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 1.321 x 457 mm Table load 1.588 kg Number of pallets: 1 x Movement X-axis 1.270 mm Movement Y-axis 508 mm Movement Z-axis 635 mm Spindle taper MAS BT40 Spindle speed 40 - 8.100 1/min Fpjdpfjytb Syjx Afusd Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2015, functionality: fully functional, Everything is perfect! Immediately ready for operation! Transport possible! Number of pallets: 1 Pallet size: External: 1324 mm Fpedpfeyrtz Dox Afuod Internal: 457 mm Travel distances: X-axis: 1270 mm Y-axis: 508 mm Z-axis: 635 mm Spindle speed: 8000 rpm Spindle motor power: 22.4 kW Tool size: ISO 4 20-position tool changer Control: Haas CNC control Operating hours: 7849

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 750 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 530 mm, controller manufacturer: FANUC, controller model: Oi MF5, total height: 2,850 mm, total width: 2,600 mm, table width: 420 mm, table length: 750 mm, table load: 400 kg, overall weight: 5,000 kg, spindle speed (max.): 11,000 rpm, spindle motor power: 11,000 W, product length (max.): 2,400 mm, number of axes: 4, This 4-axis Z-YANG V7L was manufactured in 2021. It features an X-axis travel of 750 mm, Y-axis travel of 430 mm, and Z-axis travel of 530 mm. The machine is equipped with a FANUC Oi MF5 control system, a powerful 11 kW spindle motor, and an automatic tool changer with 24 tools. If you are looking to get high-quality metalworking capabilities, consider the Z-YANG V7L vertical machining centre we have for sale. Contact us for further details. • Automatic Tool Changer: 24 tools • Rapid Traverse: 48 m/min • Feed Rate: up to 15 m/min Additional equipment • Chip conveyor (included) Technical Specification Taper Size BT 40 Fodpfxsyrfcgj Afuepd

Condition: good (used), Year of construction: 2011, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Fpsdpsyq Ipgsfx Afujd

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 450 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 12,400 kg, spindle speed (max.): 12,000 rpm, distance table to spindle center: 130 mm, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 181, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We acquired this machine in working condition directly from production—see the videos of the machine operating prior to disassembly! The Mori Seiki NMV 5000 DCG is a high-end (simultaneous) 5-axis machining center, designed for precision manufacturing in industries where complex geometries and exact tolerances are crucial. Included: - KNOLL FKA/500 band filter system + 3 filter rolls. - Filtermist FX5000 coolant mist extractor. - Renishaw OMP60 3D probe. - Chip conveyor - Spindle cooler - Original Mori Seiki tool holder block. - Original documentation + electrical diagrams. Fpedpoyq Emijfx Afusd This Mori received a new spindle some time ago, which has only seen limited operating hours since. Report available!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 12,118 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rotary table diameter: 500 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-Axis Travel: 762 mm Y-Axis Travel: 508 mm Z-Axis Travel: 508 mm Table Load: 300 kg Rotary Table Diameter: 500 mm Spindle Speed (max.): 12,000 rpm Spindle Motor Power: 22 kW Spindle Taper: BT40 Number of Tool Magazine Slots: 40 MACHINE DETAILS CNC Control Manufacturer: HAAS Dimensions & Weight Dimensions (L x W x H): 4,014 x 3,046 x 3,048 mm Weight: 6,500 kg Operating Hours Power-On Hours: 16,142 h Machining Hours: 12,118 h EQUIPMENT Central spindle cooling system 20 bar Fsdsypbhtepfx Afujpd Filtration Chip conveyor Workpiece probe Tool probe Robot interface Automatic (side) door Portable handwheel Cleaning gun High-speed machining

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 180 mm, table width: 410 mm, table length: 1,230 mm, table load: 250 kg, overall weight: 3,500 kg, spindle speed (max.): 9,200 rpm, For sale: 1 used milling machine Manufacturer: W. Fehlmann AG Maschinenfabrik Type: 80 CNC Year of manufacture: 2000 Fjdpsynwdnefx Afuopd Technical data: Travel X-axis: 700 mm Travel Y-axis: 315 mm Travel Z-axis: 180 mm Travel W-axis: 495 mm Spindle speed (max.): 9,200 rpm Number of tool magazine slots: 32 Tool holder: SK30 Table width: 410 mm Table length: 1,230 mm Table load capacity: 250 kg Control manufacturer: HEIDENHAIN TNC415B Equipment: Documentation/Manual Continuously variable spindle speed FEHLMANN indexer (4th axis) The machine can be inspected at our warehouse in 09599 Freiberg.

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Fjdpfx Aeyncfwofujpd Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: like new (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Machining centre with 15,000 spindle rpm and side mounting. Haas 4-axis drive and wiring. Travels: x=762 mm / y=406 mm / z=508 mm. Tool changer with 24+1 tools, chip removal system, Renishaw measurement equipment, suitable for high-speed machining. Expanded memory. Very high-quality machine. Fpsdpsyna Rdjfx Afued

Condition: good (used), Year of construction: 2005, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, total height: 2,450 mm, total length: 5,200 mm, total width: 4,500 mm, table width: 500 mm, table length: 630 mm, table load: 300 kg, overall weight: 12,000 kg, 5-axis CNC machine (VMC) DECKEL MAHO - DMC 60T MACH-ID 9443 Make: DECKEL MAHO Type: DMC 60T Control: HeidenHain iTNC530 Year: 2005 € 12.500,00 X - Travel: 760mm Y - Travel: 560mm Z - Travel: 560mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 630mm Table Width: 500mm Table load: 300 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 5200mm Width: 4500mm Height: 2450mm Weight: 12000kg Fedpfx Ajym R Tgjfuspd Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Fpodeym Naxopfx Afued Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTC530, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 2 x 750 mm Travel Y-axis: 500 mm Travel Z-axis: 600 mm Rapid traverse X / Y direction: 25 m/min Rapid traverse Z direction: 20 m/min Feed force: 9 kN Spindle speed range: 30-12,000 rpm Fpedpfx Asymz D Nsfusd Tool changer: 22-position Tool holder: SK40 Maximum tool length: 400 mm Maximum tool diameter: 85 mm (135 mm with adjacent stations empty) Tool change time: 4.0 s Clamping area: 2 x 1,350 mm x 500 mm Maximum table load per table: 550 kg MACHINE DETAILS Control model: Heidenhain iTC530 Drive power: 30/20 kW Total power requirement: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6.0 x 3.5 x 3.5 m Machine weight: 10,000 kg EQUIPMENT Internal cooling Coolant system with paper band filter Documentation

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, table load: 1,200 kg, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis: 1,660 mm Y-axis: 760 mm Z-axis: 660 mm Table size: 760 x 2,000 mm Max. table load: 1,200 kg Tool holder: SK 40 Tool changer: 2 x 24 Fpedpfxjymw Nhs Afusd Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket free: 110 mm Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min MACHINE DETAILS Control: MAZATROL M-PLUS Dimensions & Weight Required space: approx. 6.0 x 4.0 x 3.5 m Machine weight: approx. 8.1 t Total power requirement: 32.8 kVA The machine has been serviced regularly.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 6,200 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, tool weight: 5,000 g, number of axes: 4, This 4-axis STAMA MC 326 vertical machining centre was manufactured in 2011. It features a travel of 700 mm in the X-axis, 400 mm in the Y-axis, and 360 mm in the Z-axis. The machine is equipped with a spindle power of 18.5 kW and a tool magazine capacity of 48 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 326 machine we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 60 m/min • Feed rate: 1–10,000 mm/min • Acceleration: X/Y 5 m/s², Z 12 m/s² • Spindle: up to 300 Nm • Tool magazine: 48 tools; max tool Ø 88 mm; max tool length 300 mm; tool change approx. 2.4 s • Rotary table: diameter 180 mm (NC 4th axis) • Coolant system: tank 900 L; filtration 50 µm; pressure up to 25 bar • Hydraulics: 250 bar • Compressed air supply: 6 bar • Connected load: 28 kVA • Power supply: 3 × 400 V / 50 Hz Additional equipment Fsdpfoymduwex Afuspd • Rear chip conveyor • NC rotary table (4th axis), Ø 180 mm Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. Fedpfx Aoymcvmefuspd • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2018, MAS - MCV 800 QUICK - 2018 - system HEIDENHAIN TNC 620 - workpiece and tool measuring sonds HEIDENHAIN TS/TT 460 - table 1000x500 mm - table load 600 kg - X/Y/Z=800/500/550 mm - 12000 RPM - spindle taper ISO 40 - spindle through cooling 20 bar - ATC 24 - in 1 shift use - fully working Fpsdpfx Aeyl Srusfujd - very good technical conditions - under power

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 1502\2, total height: 2,200 mm, total length: 2,500 mm, total width: 3,600 mm, table width: 600 mm, table length: 1,000 mm, number of spindles: 1, number of slots in tool magazine: 12, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, For sale: FAMU FAS-2M vertical CNC machining center, year 1995, equipped with HEIDENHAIN control. Machine complete with enclosures and operator console (as shown in the photos). Ideal for general machining operations (steel/aluminum), plates, fixtures, and components. Fjdpeyl Nfxsfx Afuopd Available specifications: Table size: 1000 × 600 mm Table-to-spindle nose distance: 400 mm (in current position) Machine dimensions: 2500 × 3600 × 2200 mm Sold as is, as viewed.

Condition: excellent (used), HAAS VF-2SS YEAR OF MANUFACTURE: 2022 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Max. spindle speed: 12,000 rpm PulseJet system Additional coolant filter Through-spindle coolant (IKZ) Number of tools: 30+1 Fedpfoyl I N Njx Afuspd Taper type: BT40 / CT40

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Table size D500 mm Table load 300 kg X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degrees C rotation 0.001 - 360 degrees Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22.4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 Fpsdpfsylw Tdjx Afuod ATC magazine 30+1 positions Max. tool diameter (adjacent) D64 mm Max. tool diameter (adjacent slots empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kg Machine weight 6500 kg Machine dimensions LxWxH = 4420 x 2340 x 2540 mm

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Brother C00, _____ Fedpfxsylrn Ae Afuspd Description: Year of manuf. : 2022 Control : Sonstige Brother C00 Speed : 10000 rpm Movement X/Y/Z : 700/400/300 mm Tool holder : BBT 30 Mainspindle: Technology:Directdrive Speed:10.000 rpm Power (max.):26,2 kW Torque (max.):92 Nm Taper:BBT 30 Workingtable: Clampingsurface:800 x 400 mm Tableloading (max.):250 kg In general: Toolmagazine:21 Stations Rapid travers in X/Y/Z:50/50/56 m/min Equipment/Accessory: Chipmanagement:Chip coveyor Coolingmanagement:Minimumlubrication (IKZ), Company Lubrix V5 4.-Axis:Lehmann EA-510 with Counterbearing Workpiececlamping:Hydrulic, 80-210 bar Contactcontrol:Pneumatic Automationinterface I:Automatic Door (electrical) Automationinterface I:Robotinterface Oilmistseparation:Mechanical extraction, company Sara UC1 SD Columnextention:150 mm Setup operations:Electronic Handwheel Further Equipment:Trafo