Green House Co.

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 18,155 h, load capacity: 45,000 kg, lifting height: 14,565 mm, fuel type: diesel, power: 243 kW (330.39 HP), empty load weight: 65,600 kg, drive type: Diesel, construction width: 4,150 mm, Full-container reach stacker Gearbox: Clark/Dana Condition: Ready for operation and fully functional Tjdpfxjx Alrno Af Njf Technical condition: Good Front tyre size: 18.00-25 Rear tyre size: 18.00-25 Piggy-back, hydr. sliding cabin

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 15,595 h, load capacity: 10,000 kg, lifting height: 18,800 mm, mast type: duplex, power: 185 kW (251.53 HP), Empty container handler Load center: 1220 Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Tjdpox Alrhsfx Af Nsf Front tires type: Super elastic Front tires size: 14.00-24 Front tires condition: 60 - 80% Rear tires type: Super elastic Rear tires size: 14.00-24 Rear tires condition: 40 - 60% electrical pre-heating for engine and driver's cabin central greasing system hydraulic center levelling of spreader +/-3° wheel nut protection on steering wheels additional working lights: 4x on cab roof, 2x on mast driver's cabin with electronic air conditioning air-suspended driver's seat with heating and seat belt rear view camera joystick control

Condition: used, functionality: fully functional, Year of construction: 1990, operating hours: 12,650 h, load capacity: 45,000 kg, lifting height: 39,000 mm, fuel type: electric, construction height: 69,000 mm, empty load weight: 650,000 kg, drive type: Elektro, STS - Ship-to-Shore Condition: Ready for operation and fully functional Technical condition: good Todpjx Alrbsfx Af Nof Equipped with 45t slewing double hook Bromma EH3 and 35t 20ft-40ft telescopic top spreader Bromma EH5.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 20,134 h, load capacity: 46,000 kg, lifting height: 15,355 mm, fuel type: diesel, power: 240 kW (326.31 HP), total length: 9,250 mm, drive type: Diesel, construction width: 4,204 mm, Full Container Reachstacker Load center: 1865 Transmission: Dana TE30 Tsdpjx Alq Rsfx Af Nef Condition: Ready for operation and fully functional Technical condition: Very good Front tire size: 18.00-33 Rear tire size: 18.00-33 Hydraulic support jacks for increasing the lifting capacity in the 3rd row from 21 t to 30 t, central lubrication system

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 15,560 h, load capacity: 9,000 kg, lifting height: 16,450 mm, fuel type: diesel, mast type: duplex, power: 164 kW (222.98 HP), empty load weight: 37,500 kg, drive type: Diesel, construction width: 4,120 mm, Empty container handler Load center: 1219 Mast type: Duplex Transmission: Dana TE17000 Condition: Ready for operation and fully functional Technical condition: good Tsdpfox Alq Djx Af Njf Front tire type: Pneumatic Front tire size: 14.00-24 Rear tire type: Pneumatic Rear tire size: 14.00-24 20-40ft telescopic spreader Elme model 584LD with MPS

Condition: used, functionality: fully functional, machine/vehicle number: 001512, Year of construction: 2014, operating hours: 4,559 h, load capacity: 1,600 kg, lifting height: 4,716 mm, free lift: 1,545 mm, fuel type: electric, mast type: triplex, construction height: 2,065 mm, fork length: 1,150 mm, drive type: Elektro, High Lift Pallet Truck Chassis number: 001512 Load centre: 600 mm Mast type: Triplex Technical condition: very good Front tyre type: Vulkollan Rear tyre type: Vulkollan Battery voltage: 24V Battery capacity: 375Ah Battery type: PzS Battery year: 2022 Tjdpfjx Alqwjx Af Nef Battery condition: 80 - 100% Description: Find your forklift at STA-TECH! Whether pallet trucks, electric, diesel, or LPG forklifts – we offer affordable, ready-to-operate models and new forklifts. STA-TECH is your partner for: ● Purchase and rental of forklifts and warehouse technology ● Purchase of used equipment and logistics ● Cross-brand service: repair, maintenance, inspections CE certificate -Key switch -Multifunction display -Electric steering

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,596 h, load capacity: 2,000 kg, lifting height: 5,080 mm, free lift: 1,470 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Automatic Condition: Refurbished without warranty Todpfex Alqqjx Af Njf Technical condition: Very good Front tyre type: Non-marking Front tyre condition: New Rear tyre type: Non-marking Rear tyre condition: New Description: Price includes new UVV safety inspection and new paintwork. The battery, year 2024, will be reconditioned with a power cycler including a Kappa Test. Suitable charger with plug included. We are happy to organize cost-effective transport for you. Leasing with option to buy is possible! Viewing appointments by arrangement only. Sideshift, 3rd valve, 4th valve,

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,127 h, load capacity: 2,000 kg, lifting height: 4,765 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Tedpfx Ajx Alqkof Nof Mast type: Triplex Transmission: Automatic Condition: Refurbished without warranty Technical condition: Very good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 625Ah Battery year: 2023 Description: Price includes new safety inspection (UVV) and new paintwork. The 2023 battery will be reconditioned using a power cycler including Kappa test, suitable charger with plug included. We are happy to organize cost-effective transport for you. Leasing with option to buy is possible! Side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, full free lift, CE certificate.

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Cutting plane directly at the saw blade Heavy-duty steel and cast iron construction Smooth-running and precise sliding table made of anodised aluminium with a proven and durable ball contact system on hardened guides; 10-year warranty against wear on the guide rails Large-area squaring frame guided on a telescopic arm and longitudinally adjustable Angle-adjustable aluminium telescopic fence with professional flip stops Parallel fence with quick-release and fine adjustment Large working table made of precision-machined cast iron remains permanently flat Standard table extension and width extension facilitate easy handling of larger workpieces Todpfxex Alqdo Af Nof Smooth operation and precise cuts Equipped with a powerful three-phase motor The large-dimensioned saw unit made of cast iron is mounted twice on the cast table, ensuring stability, precision, smooth running, and long service life Maximum cutting height is maintained even with a scoring unit installed Made in Italy TECHNICAL DATA Dimensions and Weights Weight (net) approx. 380 kg Dust Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Drive motor power: 5.0 kW Duty type of drive motor: S6 Duty cycle of drive motor: 40% Sliding Table and Table Sliding table length: 2250 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of saw blade: 2310 mm Squaring length: 2250 mm Saw blade tilt: 90 – 45° Max. cutting height at 90°: 100 mm Max. cutting height at 45°: 78 mm Saw blade diameter: 315 mm Note: Saw blade diameter independent of scoring blade Saw blade speed: 4000 rpm Scoring Unit Scoring blade diameter: 80 mm Scoring blade speed: 8000 rpm Availability: short notice Storage location: Flörsheim

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 11,229 h, load capacity: 3,000 kg, lifting height: 5,150 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 3,200 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: ready for use and fully functional Technical condition: good Front tires type: Super elastic Front tires condition: 20 - 40% Rear tires type: Super elastic Rear tires condition: 80 - 100% Tsdpfjx Alp Tex Af Nef Sideshifter, 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab,

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 6,495 h, load capacity: 3,500 kg, lifting height: 7,785 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,950 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: Good Front tires Type: Non Marking Front tires Condition: 60 - 80% Rear tires Type: Non Marking Rear tires Condition: 80 - 100% Battery type: PzS Sideshift, 3rd valve, 4th valve, Rear working lights, Front working lights, Heating, Full cab, Full free lift, Todpjx Alp Hefx Af Njf -without driver's door

Condition: ready for operation (used), Roller Crusher Binder (for glass) Brand: Binder Austria Tjdpfxex Alpys Af Nsf Type: WGB-470 Feed opening: 700 x 300mm Incl.: 2 new Gearbox of each 5,5 kW.

Condition: used, empty load weight: 9,142 kg, maximum load weight: 28,858 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 04/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2021, Equipment: ABS, Poids à vide: 9142kg, Poids total admissible: 38000kg, Espace de charge (L L H): 13.620 mm x 2.480 mm x 2.700 mmLa taille du pneu: 385/65 R22.5, Volume espace de charge: 91 m³, 1er essieu: , 2ème essieu: , 3ème essieu: , Suspension pneumatique, Dispositif anti- encastrement, Système de freinage électronique EBS, Fiche de raccordement 1x15 et 2x7 broches, Anti-spray, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télés serons heureux de vous conseiller personnellement. Todpfx Aox Alptjf Njf

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,990 h, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,900 kg, total length: 7,840 mm, drive type: Diesel, construction width: 2,490 mm, Rotating Telehandler Load Centre: 500 mm Mast Type: Telescopic Transmission: Hydrostatic Speed Class: 20 km/h Condition: Operational and fully functional Technical Condition: Good Front Tyres Type: Pneumatic Front Tyres Size: 445/65 R22.5 Front Tyre Condition: 80–100% Rear Tyres Type: Pneumatic Rear Tyres Size: 445/65 R22.5 Rear Tyre Condition: 80–100% Description: The alternative to a mobile crane, wheel loader, or rigid telehandler. The Manitou MRT 2550 Privilege Plus rotating telehandler is the perfect construction machine for the job. It can handle loads of up to 5,000 kg and work at heights up to 25 m. The versatile 3-in-1 machine (telehandler + crane + work platform) provides a wide range of daily applications. Its four-section boom and 360° rotation capability allow for various handling tasks to be completed from a fixed position. Equipment: Tedpfx Afjx Alpmj Njf - Third hydraulic valve - Work platform pre-installation with radio remote control - Fork carriage PFB/1320 mm - Forks 150 x 50 x 1200 mm - Load backrest - 7'' LCD colour display - Automatic parking brake - Return line - Tyres 445/65 R 22.5 - Reverse warning signal - Rotating beacon - Attachment recognition system - CAN bus control - AdBlue

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Tsdex Alpgepfx Af Nsf Storage location: Supplier

Condition: used, mileage: 307,045 km, power: 175 kW (237.93 HP), first registration: 06/2015, overall weight: 18,000 kg, fuel type: diesel, color: other, axle configuration: 4x2, maximum load weight: 7,245 kg, wheelbase: 5,500 mm, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, parking heater, tail-lift, traction control, This offer is non-binding. Errors and prior sale reserved. If a foreign currency is stated, it is based on the current daily exchange rate. The currency applicable is that of the vehicle's location. Waste heat utilization, engine OM936, R6, 7.7 L, 175 kW (238 HP), 1000 Nm, axle configuration 4x2, cab suspension, Comfort, steel-sprung, wheelbase 5500 mm, AdBlue tank 60 L, tank 290 L aluminum, M cab ClassicSpace, 2.30 m, tunnel 320 mm, M cab, cab width 2.30 m, locking system with central locking, comfort locking system, air conditioning, auxiliary hot water heating, driver's air-suspended seat, Comfort, electronic braking system with ABS and ASR, cruise control, CD radio. Todpfx Afsx Aln No Nsf

Condition: excellent (used), Inline checkweigher to work with Vemag machines like FM250, MMP220 etc. Excellent condition. Under 1,000 hours from new. Tedox Aln Ajpfx Af Nof

Condition: like new (used), Brand new cooling conveyor available for immediate sale. Todex Alnvepfx Af Nsf

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,262 h, load capacity: 5,000 kg, lifting height: 6,300 mm, free lift: 2,080 mm, fuel type: diesel, mast type: triplex, construction height: 3,000 mm, fork carriage width: 1,550 mm, fork length: 1,400 mm, empty load weight: 11,260 kg, total length: 5,020 mm, drive type: Diesel, construction width: 2,200 mm, Sideload Forklift Load Center: 700 Fork Width: 200 mm Fork Thickness: 50 mm Tsdpfxjx Alnps Af Nof Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Very Good Front Tires Type: Superelastic Front Tires Size: 3.00-15 Rear Tires Type: Superelastic Rear Tires Size: 3.00-15 Description: In addition to this Baumann model, we have about 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouses in Hamburg and Gdańsk. Visit our homepage - sago-online. Leasing & financing on favorable terms are always possible with us. We are also happy to buy your used vehicle outright, even if you don’t purchase one from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this GX50/14/63TR. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom constructions for forklifts from 8 tons. We are also happy to display your vehicle with us for commission-based sale. Fork Positioner, Heating, Full Cabin, Full Free Lift, Platform Height: 1020 mm

Condition: used, functionality: fully functional, empty load weight: 3,000 kg, Year of construction: 2023, total length: 4,465 mm, construction height: 2,750 mm, construction width: 2,500 mm, Truck Condition: Ready for operation and fully functional Technical condition: New Description: Mobile tire press for tire fitting. Industrial tires up to 20 inches, all tools included. Road approval. Mobile tire press for tire fitting. Industrial tires up to 20 inches, all tools included. Road approval. Tedpfx Afsx Alnij Nef

Condition: good (used), GEA AutoGrind 200 grinder for fresh and frozen meat. Currently missing both screws. Can be sold ’as is’ or complete. Tsdpfx Aox Alncef Njf

Condition: good (used), 400mm wide screw feed former with control screen upgrade by GEA. Has been used for production of vegetarian burgers. Can be supplied with other machines to make a complete coating and frying line. Tedex Almfspfx Af Nof

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand HAAS Main Drive Tool taper SK 50 Number of axis 4 Movement X-Axis Movement 1626 mm X-Axis Rapid Traverse 15.2 m/min each Y-Axis Movement 1270 mm Y-Axis Rapid Traverse 15.2 m/min each Z-Axis Movement 814 mm Z-Axis Rapid Traverse 15.2 m/min each Workpiece Workpiece weight 4536 kg Tsdpfx Afjx All Us Nef Media Chip conveyor Yes Additional Equipment Coolant tank with low and high pressure pumps 2 chip conveyors with screw This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1626 mm x 814 mm) with an integrated 4th axis rotary table, a milling spindle SK 50, and a 30+1 tool changer. The machine can handle workpieces up to 4,536 kg and includes dual chip conveyors. If you are looking to get high-quality milling capabilities, consider the HAAS EC-1600 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, operating hours: 3,361 h, Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Spindle speed range 8000 Spindle motor power 28 kW Number of axis 3 Movement X-Axis Movement 1270 mm Todpfx Afsx All Is Nof Y-Axis Movement 610 mm Z-Axis Movement 720 mm Table Table load 1200 kg Tools Max weight 15 kg Additional Equipment 4 hydraulic vices from Röhm and various SK50 tool holders This 3-axis MAS MCV 1270 Power was manufactured in 2018. It features a Heidenhain TNC 530 control, SK50 spindle holder, and a tool magazine with 24 places. The machine offers a table size of 1500mm x 670mm, supporting a maximum load of 1200kg. Rapid traverse reaches up to 40m/min, with a maximum spindle speed of 8000 rpm. If you are looking to get high-quality milling capabilities consider the MAS MCV 1270 Power machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, General Data Measurements width 2530 mm Measurements depth 2050 mm Measurements height 2650 mm Todpex Allzsfx Af Nof Machine weight 5500 kg Main Drive Spindle speed range 10000 Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Rapid Traverse 25–30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 25–30 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 25–30 m/min Table Table load 600 kg Tools Number of station 20 Max tool diameter 80 mm Max tool length 300 mm Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. Application Types Milling