Eckl Gabelstapler Service & Vertriebs GmbH

Condition: ready for operation (used), lifting capacity 200 kg lifting speed 4 m/min motor power 0.45 kW Pgsdpfx Apjz Hccvepjt remote control operation safety button chain 5x15 mm year of production 2004

Condition: good (used), Year of construction: 1997, functionality: fully functional, 1 x CNC long-turn lathe Star SA 12/16 Pjdpfjz Hccisx Appegt Year of manufacture: 1997 Control system: Fanuc 18 i-T with magazine loader Iemca CH 220/32 Year of manufacture: 1998 The counter spindle of the machine was re-bearinged approximately 6 months ago. The machine can be inspected in operation and under power at the production facility.

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Psdpoz Hcb Sjfx Appogt Total load: 138 kW

Condition: used, Year of construction: 2022, Overview SMI ECOBLOC ERGON 6-20-5 HC EV blow moulder-filler-capper combiblock for still mineral water in 6.0 L PET bottles, max. 6,000 bottles/h. Built in 2022, started up in 2023 and run only 3 to 4 times a year. The complete downstream line (handle application, labelling, robot palletizing) is also on offer. Technical data - Year of manufacture: 2022, start-up 2023 - Capacity: max. 6,000 bottles/h Pedpfx Asz Hcb Eeppsgt - Product: still mineral water - Container: 6.0 L PET bottle - Preform: 100% rPET, 86.5 g - Closure: 48/41 cap Equipment - SMI blow moulder for 6 moulds - Filler with 20 filling valves - Capper with 5 capping heads - Cap sorter and cap elevator - Pressco control system for preform and neck inspection, integrated in the combiblock Not included Blow moulds, preform and cap feeding from the pallet tipper to the hoppers, high-pressure compressor for the blow moulder. Condition As-new condition, low operating hours. Annual preventive maintenance by the OEM plus regular in-house maintenance. In production until the end of April 2026 and still installed; dry run on request, inspection by appointment. Electrical and mechanical drawings, PLC programs with backups, service and maintenance manuals and spare parts books are included. Availability From October 2026; the machine must be dismantled by the end of October 2026. Dismantling, packing and truck loading can be arranged on request. Location: France.

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm Pgedpfx Asz Hcbrjppet - Max. tilting of lower traverse: 8 mm

Condition: excellent (used), length: 4022 mm width: 209 mm engine power: 0.092 kW Pjdpfxsz Hcbfo Appjgt

Condition: good (used), Year of construction: 1964, Sheet width: 1650 mm Sheet thickness: 4 mm Straightening roller diameter: 45 mm Support rollers: 140 pieces Straightening rollers: 17 pieces Podpfx Aez Hca Ieppsgt

Condition: used, Year of construction: 2007, Overview KHS Innofill NRF filling and closing monoblock for still wine in glass bottles, built in 2007. A 50-valve filler is followed by two 10-head closers: a KHS natural-cork closer with vacuum device and an aluminium roll-on capper by Zalkin, so the machine closes either corks or screw caps. Output 12,000 bottles per hour. The operator panel and software were updated by KHS in 2022. Technical data - Manufacturer: KHS - Model: Innofill NRF - Year of manufacture: 2007 - Output: 12,000 bottles/h - Filler: 50 filling valves, pitch circle 1,800 mm, filling tube diameter 20 mm - Cork closer: KHS, 10 heads, pitch circle 360 mm, electrically heated cork jaws, cork sorter mounted on top - Vacuum device with vacuum pump - Screw-cap closer: Zalkin aluminium roll-on capper, 10 heads, pitch circle 360 mm, for 31.4 x 24.2 mm aluminium caps - Machine pitch 36π, running direction left to right - Conveyor: stainless steel slat chain, 85 mm wide, conveyor height 1,250 mm Pgodpez Hcauofx Appjt - Power supply: 400 V, 3/N/PE, 50 Hz, 90 A nominal current, 100 A slow fuse; control voltage 24 V DC - Enclosure type 12 - Overall dimensions approx. 5,300 x 3,600 x H 4,400 mm Scope of delivery - Filler-closer monoblock with guarding, front panels slide up - Automatic central lubrication - Two infeed hoppers for corks and caps with elevating feed, approx. 1,600 x 1,200 x 1,720 mm and 1,500 x 1,250 x 1,550 mm - Stainless steel CIP unit, approx. 3,000 x 1,300 x 1,900 mm - Stainless steel control cabinet, approx. 2,500 x 750 x 2,100 mm - Stainless steel trolley, approx. 800 x 750 x 1,650 mm - Two trolleys with change parts, colour-coded format sets - KHS documentation: operating manuals, spare parts list, 2022 operator-panel supplement Condition Used. The machine is still installed at its production site and can be inspected by appointment. Availability Immediately.

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Psdpfx Apez Hcanepogt Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Condition: used, Year of construction: 2016, operating hours: 6,700 h, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 420 mm, controller manufacturer: Siemens, total length: 3,900 mm, total width: 2,550 mm, overall weight: 10,000 kg, coolant supply: 70 bar, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, Selling a used, universal machining center, Spinner U-1520, manufactured in 2016, from a training center with very few operating hours! Travel distances: X: 1520 Y: 520 Z: 420 C: 360 degrees A: Equipment: Siemens 840D control with ShopMill Chip conveyor Blum tool measuring system Blum measuring probe Calibration mandrel IKZ 70 bar with paper band filter 12000 rpm spindle SK40 Tool changer Swiveling operation, 3-axis - 5-axis machining Air blow spindle Enclosed work area Pjdez Hcahjpfx Appjgt Clamping surface 3-axis table: 920 x 540 mm Swiveling round table: 650 mm diameter Accessories: Various tool holders SK40 Machine feet 3D measuring probe Tool measuring system Machine is available immediately! Machine will be loaded by us! Transport can be arranged upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, KUPER FWM 630 NEW CONDITION (not used) veneer splicing machine for sale! Accessories for start up included. Year of manufacture 2023 Stand projection 630 mm Veneer thickness approx. 0.4-2 mm Pgodpfx Asz Hcabsppjt Feed speed 7 m/min Zigzag stitching Heating head approx. 90 W Foot pedal control Power supply 230 V CE marking (Original operating instructions in german) Gross wight approx. 40 kg Space required (L x W x H) approx. 890 x 365 x 475 mm

Condition: used, Year of construction: 2008, machine/vehicle number: LV082, overall weight: 44,000 kg, Pittler PV1250 Vertical Turning Machine/Drill. Weight 44,000 kg. Psdoz Hb U Rspfx Appegt Condition Machine needs work. Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured.

Condition: good (used), Year of construction: 1983, Sheet metal width: 6200 mm Sheet metal thickness: 8 mm Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Machine weight (approx.): 19 t Pjdpfxjz Hb U Do Appegt

Condition: used, mileage: 652,427 km, power: 324 kW (440.52 HP), first registration: 03/2009, fuel type: diesel, number of seats: 59, gearing type: mechanical, emission class: euro4, color: other, brakes: retarder, Year of construction: 2009, Equipment: ABS, air conditioning, cruise control, = Additional Options and Equipment = - DVD player - Air conditioning - Front refrigerator - Sleeper cab - Toilet - Webasto auxiliary heating Psdpfxez Hb Uwe Appsgt = Further Information = Height: 370 cm Damage: None = Company Information = We are an international company based in Belgium, approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering an extensive parking area that serves as our exhibition space. We always have a large selection of buses of all brands, capacities, models, and price ranges in stock. We can find the right coach, school, or transit bus tailored to your needs or budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Opening hours for viewing used buses: Monday to Friday: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, total height: 1,000 mm, total length: 11,570 mm, total width: 2,440 mm, load capacity: 10,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: single-girder – Capacity: 10,000 kg – Lifting height: 6 m – Year of manufacture: 2001 – Hoist type: wire rope hoist – FEM/ISO hoist classification: 2m Dimensions – Span: 11,400 mm centre-to-centre – Overall length: 11,570 mm – Installation height: 660 mm Psdpsz Hb Uqofx Appjgt – Width of wheel set including buffers: 2,440 mm – Width of wheel set excluding buffers: 2,300 mm – Wheelbase: 1,900 mm – Suitable for crane rail: 50×30 mm Features – Control: wired control panel – Crane manual available: no, to be prepared – Condition: in good working order – Dismantled: yes, available immediately

Condition: used, functionality: fully functional, mileage: 379,726 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,253 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cab: CR Battery, 210 Ah, rear Diesel engine DC13 164 450 hp Euro 6 /Japan Emission 2016 Gearbox GRS905R Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm Night heater WTA cab heater 3kW Storage rear lower, driver side refrigerator Technical specifications smart ADR Continental Tyres for front axle, 315/70 Podpfxsz Hb Uko Appegt Tyres for rear axle, 315/70 Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only Main wheelbase, 3750 mm Axle ratio, i = 2.53 Fuel tank capacity 825 l, left Fuel tank capacity 395 l, right AdBlue tank capacity 105 l, right Road speed limiter, adjustable, limiter (engine speed regulation) Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED, automatic Daytime running light function LED and position lamps Fog lamp front type LED 3 diodes Cornering light Roof air deflector adjustable Door window air deflector Driver Assistance Package (ADAS) Adaptive cruise control (ACC) Lane departure warning system Lane Departure Warning with Active Steering Active Lane Keeping Assist Tyres Information Front left - 9 mm Front right - 9 mm Rear left inner - 5 mm Rear left outer - 6 mm Rear right inner - 9 mm Rear right outer - 5 mm

Condition: good (used), Year of construction: 1983, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Pgedpfx Apoz Hb Udopjt Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, stroke length: 800 mm, ram plate width: 1,200 mm, ram plate length: 2,200 mm, overall weight: 100,000 kg, 2022 Macrodyne 1500T Hydraulic Hot Forging Press. Condition Very Good. Weight 100000 kg. Refer to attachments in the documents sections for more information. Unit available immediately. Buyer responsible for removal, contractor must be licensed and insured. MAXIMUM PRESSING FORCE 15,000 KN USABLE BED BOLSTER SIZE (L-R X F-B) 2200 mm X 1200 mm USABLE RAM BOLSTER SIZE (L-R X F-B) 2200 mm X 1200 mm DISTANCE BETWEEN TENSION MEMBERS (L-R) 2400 mm DISTANCE BETWEEN TENSION MEMBERS (F-B X HEIGHT) 750 mm X 1473 mm DAYLIGHT 1400 mm SHUT HEIGHT 600 mm STROKE 800 mm TOP EJECTOR CAPACITY (STATIONS 3 & 4) 750 KN TOP EJECTOR STROKE (STATIONS 3 & 4) 90 mm Psdpfxez Hb T Ho Appogt BOTTOM EJECTOR CAPACITY (STATION 3) 750 KN BOTTOM EJECTOR STROKE 200 mm MAXIMUM PUNCH WEDGE CAPACITY (STATION 4) 6000 KN

Condition: excellent (used), ESPEC TSB-51 Temperature Shock Chamber Manufacturer: ESPEC CORP. Type: TSB-51 Machine Type: Liquid-to-Liquid Temperature Shock Chamber Bath Volume: 55 liters For sale is a used ESPEC TSB-51 Liquid-to-Liquid Temperature Shock Chamber. The system was designed for professional temperature shock testing and is suitable for material and component testing, electronics testing, quality assurance, and research and development. Technical Data: Model: TSB-51 Year of Manufacture: 2013 Operating Hours: 13,611.4 h Temperature Range Hot Bath: +70 °C to +200 °C Temperature Range Cold Bath: -65 °C to 0 °C Bath Volume: 55 liters Test Basket (W × H × D): 150 × 150 × 200 mm Power Supply: AC 400 V / 3 Phases / 50 Hz Max. Current Draw: 22 A Condensation Method: Air-cooled Refrigeration System: Refrigerant 1: R404A Refrigerant Quantity: 2.8 kg Refrigerant 2: R508A Refrigerant Quantity: 0.89 kg Condensation Method: Air-cooled Dimensions: External Dimensions (W × D × H): approx. 1,200 × 1,320 × 1,785 mm Internal Dimensions (W × H × D): approx. 290 × 350 × 520 mm Test Basket (W × H × D): 150 × 150 × 200 mm Weight: 800 kg Equipment: Programmable ESPEC controller with display Liquid-to-Liquid Temperature Shock Testing System Hot bath Cold bath Movable test basket Overcooling protection Overheating protection Operating hour counter RS-485 interface ESPEC OnlineConverter PN5-CN Ethernet interface USB interface Operating manuals as shown in the pictures Transport Data: Unit (W × D × H): approx. 1,200 × 1,320 × 1,785 mm Weight: approx. 800 kg Transport as a single unit Condition: Used Unit starts / Display and controller active. Optical condition as shown in the pictures. Pgedpfx Aez Hb Tyeppjt Scope of Delivery: ESPEC TSB-51 Temperature Shock Chamber ESPEC OnlineConverter PN5-CN Operating manuals as shown in the pictures Accessories as shown in the pictures Availability: By arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, feed length W-axis: 1,600 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Pedpfx Aez Hb Ttjppjgt Total power requirement 83 kW Additional information incl. 15 plates

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,202 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, table load: 800 kg, overall weight: 5,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DMG MORI CMX 800V was manufactured in 2020. It features an X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a robust table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 800V vertical machining centre we have for sale. Contact us for further details. Psdpfx Aez Hb Tajppsgt • Spindle: • Max torque: 83 / 57 Nm • Working range: • Rapid traverse (X/Y/Z): 30 / 30 / 30 m/min • Hours (approx.): • Operating: 12,138 h • Machining: 3,202 h

Condition: good (used), functionality: fully functional, mileage: 120,502 km, power: 125 kW (169.95 HP), fuel type: diesel, empty load weight: 2,424 kg, maximum load weight: 1,076 kg, overall weight: 3,500 kg, tire condition: 60 %, next inspection (TÜV): 08/2028, fuel: diesel, gearing type: mechanical, emission class: euro6d-temp, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Year of construction: 2022, number of previous owners: 1, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, USB port, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, power mirror, sliding door, soot filter, trailer coupling, truck registration, Number of seats: 5 (Removable 3-seat bench in the cargo area) Multimedia system MBUX (7" touchscreen) Bluetooth hands-free system Steering wheel with multi-function controls Storage compartments: luggage net on the rear doors Airbag on the passenger side Acoustic package Trailer hitch: ball head, for increased towing capacity - 3.5 t 13-pin trailer socket Chassis: station wagon version DAB tuner (digital radio reception) Ceiling light in the cargo area with door contact Grab handle on the rear pillar, rear right Pgedpfjz Hb S Njx Appjt Tachograph operation located at the front under the headliner Windows for rear doors Window in the cargo/passenger compartment: - fixed, front left Window in the cargo/passenger compartment: - fixed, front right Vehicle without cargo compartment partition Generator 250 A Rear door (opening angle 270 degrees) Wooden floor in the cargo area Cargo area light, LED Cable duct on the side wall Side marker lights Navigation system for MBUX multimedia system Cross member with integrated step Spare wheel in roadworthy condition Spare wheel holder under the end of the frame including jack Interior rearview mirror Seats in the cab: single passenger seat Seats in the cargo/passenger compartment: 1st row, 3-seat bench 230V socket in the cab Panelling in the cargo/passenger compartment: wood, high (up to the roof) Heat protection glazing (windshield with band filter at the top) Electric auxiliary heater Hot water auxiliary heater.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: A-6.3240, Complete 2019 Wienstroth Fixture Heat Treat/Quenching Line. Furnace Temperature Max 880 Deg C, 480kW, Heating Zones: 4, Power Supply Voltage: 460/60 Volts/Hz. Refer to attachments for further equipment specs & drawings. Line to include: High Temperature Furnace w/ Material Conveyers Overhead Crane & Hoist System Quenching Bath w/ Heat Exchanger, Pumps and PLC Washing/Rinsing Station, 2 Zone, TPS & Entrance Conveyer Assembly Transfer Conveyer System, Material Handling Assembly w/ Tracks Low Temperature Temper Furnace w/ Cooling Conveyer & PLC Quenching Line PLC Controller Power Distribution Cabinets, Rittal/Wienstroth Pgsdpoz Hb S Aefx Appet 24x Pallets Quenching Line Tooling

Condition: excellent (used), functionality: fully functional, power: 12.2 kW (16.59 HP), fuel type: diesel, overall weight: 1,664 kg, Year of construction: 2022, operating hours: 817 h, Equipment: rubber tracks, JCB 15C-1/SW/2x bucket/1.7 t/swing arm • Manufacturer: JCB • Type: 15C-1 Pjdjz Hb Spspfx Appogt • Year of manufacture: 2022 • Operating hours: 817 hrs • Power: 12.2 KW/16.59 HP • Engine: 3-cylinder Perkins 403D-07 diesel • Swing arm • Rädlinger quick coupler MS01 • Manual quick coupler • Dozer blade • Rubber tracks • Digging depth: 2.42 m • Transport length: 3.86 m • Transport width: 1 m • Transport height: 2.32 m • Next service: 12/2026 • Total weight: 1664 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: good (used), Year of construction: 1986, Swing diameter: 1,320 mm Turning length: 5,000 mm Faceplate diameter: 1,250 mm Workpiece weight: 14 t Swing diameter over support: 900 - 950 mm Total power requirement: 45 kW Machine weight approx.: 18 t Pgodpoz Hb Siofx Appet