Jerzy Gawel

Condition: good (used), Year of construction: 2010, empty load weight: 1,450 kg,

Condition: good (used), Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, central oil lubrication pump, oil single-line pump -Manufacturer: Vogel, Oil - Central lubrication pump, oil inlet pump Dwodpsztpq Ajfx Aanea -Type: unfortunately no exact designation -Item No.: 122 Container capacity: 2.7 l -Dimensions: 235/140/H310 mm -Weight: 5.4 kg

Condition: used, Year of construction: 2021, 1 unit of HITACHI ZW75-6C wheel loader 180 cm bucket width, fork length 120 cm All technical data for the auction item can be found under "Documents" as a downloadable PDF! Color: as shown in the pictures, according to the images and inspection Dwsdoztpqijpfx Aanea Year of manufacture: 2021 Vehicle ID: W09P85395MBA08911 Weight in kg approx.: 5950 Condition: used

Condition: good (used), Year of construction: 2016, machine/vehicle number: 04.522, total height: 2,670 mm, 2016 CIMC INTERNATIONAL 20FT SWAP BODY tank container 34,820L / 1-compartment / 3 baffles / 4 lids UN PORTABLE T11 GB PT LR 63484 // L4BN EMKD steam heating bottom discharge Dedpoztpqcefx Aanswa valid 2.5 years + CSC inspection until 01-2027 DAMAGED INSIDE! = Further information = General information Year of manufacture: Nov. 2016 Model year: 2016 Intended use: Chemicals Weights Tare weight: 4,600 kg Payload: 31,400 kg GVW: 36,000 kg Functional Load compartment volume: 25,000 l Body brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of compartments: 1 Condition Technical condition: good Optical condition: good Damage: Damaged vehicle (not roadworthy) Further information Please contact Arne Honingh for more information.

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, RAM POWER pressure amplifier from a Mikron VC500D CNC machining center -Type: 152 284 4 RP 9813 Dwodpfxsztpp Ej Aanea -Individual components: see photos -Transport dimensions: 580/215/220 mm -Weight: 12.6 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Indramat, AC servo power supply from CNC machining center Mikron VC500D -Type: KDV1-3-100-220/300-W1 Dsdpoztppxefx Aanewa -Quantity: 1x Power Supply available -Dimensions: 485/390/H105 mm -Weight: 20.9 kg

Condition: good (used), 85 VDI 50 tool holders in various designs. Dwsdpfxjztppre Aanja

Condition: excellent (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: white, overall weight: 7,200 kg, axle configuration: 2 axles, number of seats: 1, suspension: hydraulics, Year of construction: 2017, operating hours: 5,908 h, The authorized SUBARU dealer in Łaziska Górne has a brand new machine for sale, recently purchased in Denmark and awaiting transport. WIRTGEN W 50 Ri 2017, 5900 operating hours. The machine comes from the first owner and is ready for immediate use. Currently, a feeder is not included, but we can locate and add it to the offer. The price includes transport to the specified address in Poland – transport is also possible throughout Europe. We offer all forms of payment: Leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the machine away from the dealership immediately. Additionally, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid-for cars and trucks to the specified address throughout Europe. For more information about our services, please contact our sales representatives. Technical data: Year of manufacture: 2017 Operating hours: approx. 5,900 hours Engine: Deutz TCD 4.1 L4 Diesel engine, 4-cylinder Engine capacity: 4.1 l Power: 105 kW / 143 hp Milling width: 500 mm Maximum milling depth: 210 mm Milling drum: 60 knives Knife spacing: 15 mm Milling drum diameter: approx. 750 mm Working milling speed: up to approx. 48 m/min Fuel tank: approx. 230 l Water tank: approx. 600 l Hydraulic oil tank: approx. 63 l Machine weight: approx. 7,200 kg Transport dimensions without feeder: approx. 3,960 × 1,620 × 2,400 mm Machine sold without feeder / material conveyor Dodpfx Aaoztpplsnjwa Machine condition: Very good Compact dimensions, ideal for working in cities, parking lots, sidewalks, and areas with limited space. The milling width of 500 mm allows for precise execution of repairs and local road works. A milling depth of up to 210 mm ensures high versatility. A powerful and proven Deutz engine – a durable, popular unit with good parts availability. The low weight and dimensions facilitate the transport of the machine between construction sites. Good visibility from the operator's position and easy control of the milling process. Precise steering and high maneuverability, particularly important when working near curbs and manholes. Simple and robust construction, valued in Wirtgen machines for its durability and ease of operation. Low logistics costs compared to larger road milling machines. The machine has been refurbished, is ready for work, and is available immediately. The year 2017 and approximately 5,900 operating hours make it an attractive offer for a company looking for a compact milling machine without the need for large upfront investments. The stated price is net and applies to export and businesses. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price.

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control unit, converter, controller, servo line former, drive control unit, AC mainspindle drive, spindle controller Dedjztppfjpfx Aanjwa -Manufacturer: Indramat. AC mainspindle drive from a Mikron VC500D CNC machining center -Type: KDA 3.2-100-3-AP0-W1 -Art.: 776781-001 -Dimensions: 485/390/H150 mm -Weight: 17.8 kg

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 2200390951, TAEevo Tech 081 Special are compact water cooling units suitable for outdoor installation. Includes crankcase heater, phase monitoring, buffer tank, and a large, integrated P3 environmental pump. Special equipment: Color – RAL 9003 Potential-free signal on terminal as follows: - Cooling On/Off - Main switch On/Off - Collective alarm signal Cooling capacity 23.6 kW Cold water, outlet/inlet: 7 / 12°C Volume flow rate 4.04 m³/h Ambient temperature 32°C Refrigerant R 410A Electrical data: Voltage 400V, Frequency 50Hz, 3 phases Dwsdpfxeztpn Io Aanea Maximum power consumption 12.04 kW Maximum current 20.2 A Starting current 113.37 A Protection class IP54

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Djdpfx Aajztpnzjnswa Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: used, Double Sheet Control for Horizon VAC-100/VAC-60 Collator, pack of 5 sensor Optimize the precision of your Horizon VAC-100 or VAC-60 collating machine with our high-quality replacement double sheet control Dsdjztpnujpfx Aanswa Compatible with Horizon VAC-100 and VAC-60 models Sensor for reliable double sheet control Ensures precise error detection and smooth operation Easy replacement for minimal downtime This sensor is an important component for quality assurance in your Horizon collator. It ensures that your machine continues to operate efficiently and precisely by reliably detecting double sheets and preventing faulty production. Invest in the accuracy and reliability of your print finishing. Order now and keep your Horizon VAC-100 or VAC-60 in top shape!

Condition: used, functionality: fully functional, mileage: 190,356 km, power: 368 kW (500.34 HP), first registration: 03/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with carbon filter, sun, mist, and air quality sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Retarder: YES ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 99 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side Skirts: YES Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Dedpfx Ajztpnnoanswa Front left - 13 mm Front right - 13 mm Rear left inner - 7 mm Rear left outer - 9 mm Rear right inner - 7 mm Rear right outer - 8 mm

Condition: good (used), Year of construction: 1975, Pressure: 250 t Dodpfsztpnhex Aanswa Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: excellent (used), Year of construction: 1997, operating hours: 12,873 h, functionality: fully functional, overall weight: 4,800 kg, fuel type: diesel, nominal power (apparent): 300 kVA, motor manufacturer: DETROIT DIESEL, type of cooling: water, ATLAS COPCO QAS 338 GD, 300 kVA, year 1997, 12,873 operating hours, DETROIT DIESEL S60 engine, water-cooled, weight 4800 kg. Dedpfx Aasztpm Denswa

Condition: new, Year of construction: 2026, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table width: 300 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 400 mm, distance table to ram: 2,700 mm, clearance between the columns: 2,700 mm, oil tank capacity: 400 l, total length: 3,500 mm, total width: 1,900 mm, total height: 2,600 mm, overall weight: 10,500 kg, Equipment: CE marking, safety light barrier, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm 5 Stroke 250 mm Dsc Arxfey U Hmgem Iswa Dwodpfjztpmwex Aansa 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 6+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA66T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm – from above: - feed rollers - toothed infeed roller - pressure rollers, 2 rows - toothed infeed roller - pressure roller - planing roller 510mm, 4-knife, 7.5kW motor - pressure rollers - smooth, outfeed roller - outfeed pressure roller, 2 pcs - smooth feed roller – from below: - pressure roller - adjustable infeed table + slip roller - planing roller 510mm, 4-knife, 5.5kW motor - 2 slip rollers, smooth - side pressure roller – from the rear: - side spindles 1) vertical right 140mm, 4kW 2) vertical left 140mm, 4kW - spindle diameter 40mm - 4-knife cutter heads fitted, height 120mm - spindles adjustable up/down, right/left - stepless feed rate adjustment - electric table lifting - dust extraction port diameters 3x150mm, 1x110mm - dimensions L/W/H 2300x1700x1700mm - weight 2200kg ADVANTAGES - ideal for processing flooring - electric table lifting - Czech production - used planer, very good condition Net price: 36900 PLN Dwedpfx Asztpmqoanja Net price: 8786 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to larger fluctuations)

Condition: ready for operation (used), operating hours: 11,525 h, functionality: fully functional, machine/vehicle number: 0613, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, controller model: Okuma OSP7000M, spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Travel in X-axis: 1,500 mm Travel in Y-axis: 630 mm Travel in Z-axis: 610 mm Distance from spindle nose to table surface: 230–840 mm Distance from spindle center to front of column: 730 mm Main spindle Spindle speed range: 10–5,000 rpm Continuously variable speed control Spindle taper: 7/24, No. 50 Tool holder: BT50 Angle: 90° Diameter of front spindle bearing: 100 mm Work table Effective table size: 1,530 × 630 mm Table size: 1,800 × 780 mm Maximum table load capacity: 1,500 kg T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 125 mm Distance from table surface to bottom edge of machine bed: 830 mm Feeds Rapid traverse X/Y-axis: 15,000 mm/min Rapid traverse Z-axis: 13,000 mm/min Cutting feed X/Y/Z-axis: 1–10,000 mm/min Average continuous cutting feed: 1–2,000 mm/min Tool changer Number of positions in tool magazine: 20 Tools included in the machine Djdpfx Ajztpmdsanjwa MACHINE DETAILS Control model: Okuma OSP7000M Operating hours (as of 12.04.2026) Power-on hours: 59,180 h Operating hours: 16,510 h Machining hours: 11,525 h Dimensions & weight Machine dimensions (L × W × H): 4,570 × 4,530 × 3,265 mm Weight: 11 t EQUIPMENT Kitagawa NC rotary table TSR180A Handheld terminal Mac mini IH Oil skimmer Chip conveyor Tools included in the machine Machine manuals Original tolerance reports Parameter backup / Backup of machine parameters

Condition: good (used), Year of construction: 2019, 1 x Loma X Ray System Year: 2019 Model: AXR54197-60175F Dwodpfxsztpl Ts Aansa Aperture: 300mm wide x 175mm high Rubber Pu belt Reject bin with air-blasts Bin-full, reject confirmation, controlled restart

Condition: used, mileage: 46,420 km, power: 120 kW (163.15 HP), first registration: 07/2024, fuel type: diesel, empty load weight: 2,092 kg, maximum load weight: 708 kg, overall weight: 2,800 kg, wheelbase: 3,200 mm, fuel: diesel, color: white, gearing type: mechanical, suspension: other, number of seats: 3, total length: 5,140 mm, loading space length: 2,336 mm, loading space width: 1,650 mm, loading space height: 1,353 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), had accident, navigation system, onboard computer, sliding door, soot filter, traction control, Disc brakes, double passenger seat, interior trim, wooden cargo floor, partition, lumbar support, accident-damaged, heat-insulating glass, clock & tachometer, brake pad indicator, 5 doors, 1st owner, Euro6e, green environmental badge (4), steel rims, rearview camera, anthracite, 6-speed transmission, passenger airbag, sliding door on the right, navigation with screen, color monitor for navigation system, parking assist, parking assist camera, parking assist sensors rear, parking assist sensors front, electric windows 2-way, seat heating, radio, radio/MP3, outside temperature display, heated exterior mirrors, power steering, electric exterior mirrors, brake assist, comfort seats, rear-wheel drive, 3rd brake light, center armrest, country version Germany, additional equipment available, errors and prior sale excepted, trade-ins possible, financing possible, please contact us, we will prepare a customized offer for you. Nationwide delivery possible. 502 Updates intelligent speed assistant BA3 Active brake assist BB6 Brake booster failure compensation BB7 CO2-optimized brake system C6L Multifunction steering wheel CF0 Basic chassis CL1 Steering wheel adjustable in inclination and height D51 Partition with 1 window E07 Hill-start assist E1D DIGITAL RADIO (DAB) E1E Navigation E57 Electrical system for trailer socket E7M MBUX multimedia system EL8 2-way front speakers EW6 Pre-installation for Remote Services Plus EY2 Live Traffic Information EY5 Mercedes-Benz emergency call system EY6 Breakdown management EZ5 Parking package F2W Winter package F3Z Comfort closing F48 Heating for windshield washer system F66 Lockable glove compartment F68 Exterior mirrors heated and electrically adjustable FR1 Rear camera not foldable FY7 Multi-button remote control GE1 6-speed manual transmission TSG 380 H15 Seat heating for passenger H16 Seat heating for driver H20 Heat-insulating glass all around HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC IN2 Wheelbase 3200 mm, long overhang J55 Seatbelt warning system for passenger seat Dwsdpfsztpl Hex Aansa

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller Dwedpfsztplyox Aanoa -Manufacturer: Indramat, AC servo controller from CNC machining center Mikron VC500D -Type: TDM 1.2-30-300-W0 -Number: 3x servo controllers available -Price: per piece -Dimensions: 325/390/H105 mm -Weight: 8.2 kg

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14764, Key operating data Motor power (standard): 5.5 kW Cutting diameter of the rotor: 300 mm Dwjdpfeztplgsx Aanoa Rotor width / cutting length: 125 mm Rotor speed: 230 rpm (slow-speed system for noise and dust reduction) Average output (throughput): 80 kg/h (depending on the type of plastic and the mesh size of the screen) Power supply: 3 x 400 V + N, 50 Hz Cutting system and working chamber Opening of the shredding chamber: 450 x 335 mm Opening of the feed hopper: 490 x 420 mm Number of rotating knives (on the rotor): 10 Number of fixed knives (on the stator): 2 Cutting geometry: Shear cutting with a slanted rotor, which facilitates the handling of three-dimensional parts Standard screen: Mesh size 6 mm (round, interchangeable) Particle size of the recovered regranulate: Standard 4–8 mm (depending on the installed screen) External dimensions and weight Machine length: 1100 mm Machine width: 900 mm Machine height: 2100 mm (for the version with a high stand frame for dust extraction) Total weight: 500 kg Additionally: new replacement knives, three screens with 5, 6 and 8 mm Cross magnet in the feed hopper!

Condition: used, Year of construction: 2008, VP 800 Year 2008 Dsdpfeztplajx Aanewa Working condition Cooler is refurbished in 2024

Condition: used, mileage: 612,000 km, fuel type: diesel, maximum load weight: 19,000 kg, overall weight: 32,000 kg, fuel: diesel, gearing type: automatic, emission class: euro5, Tractor unit with a 4-axle chassis, automatic transmission, 612,000 km, with two CO,ME.C tanks, each with a capacity of 23,000 liters, for the transport of dangerous goods (see attached document). Next tank inspection: 10/2027. Dwedpsztpk Nsfx Aansa The price indicated above is exclusive of 22% VAT, plus transfer of ownership fees.

Condition: used, Year of construction: 2020, Diesinking / EDM Dodpfx Asztpk Ajanjwa Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 270 mm table size X: 600 mm table size Y: 400 mm max. workpiece size X: 975 mm max. workpiece size Y: 555 mm max. workpiece size Z: 350 mm max. electrode weight: 50 kg max. workpiece weight: 550 kg cooler