Frickenschmidt

Condition: used, Year of construction: 1994, Pressure tank with two dished heads, central outlet and manhole. Additional title: pressure tank Volume: 7366 l Working pressure: 3 bar Width: 1850 mm Height: 3300 mm Weight: 400 kg Dsdpfsyzh Ryox Abwocf Material: stainless steel Position: vertical Base construction: on feet Features: central outlet, manhole, cleaning line, CIP spray head, 2-hole RLV, bunging device, pressure gauge, sampling tap, level indicator, discharge line with hand valve

Condition: used, Year of construction: 1980, Pressureless stainless steel tank with two dished heads and central outlet, with level indicator, CIP-pipe, and manhole. Additional title: sugar tank Volume: 18500 l Width: 2,9 m Dedpfx Abeyzh Nijwocf Height: 3,25 m Weight: 1300 kg Material: stainless steel Position: vertical Base construction: on feet Features: central outlet, level indicator, CIP-pipe, manhole

Condition: used, Manual operating biological lactic acid plant with 3 tanks in stainless steel as storage and dosing tanks, with all fittings Additional title: 3-vessel plant Dsdpfx Aeyzh Dgsbwocf Volume and dimension per tank: 20 hl Diameter 1300 mm, cylindrical height 1500 mm, total height 2100 mm Length: 4500 mm Width: 1700 mm Height: 2100 mm Operation / Control: electrical box with buttons, switches and temperature controls Material: stainless steel Position: free standing Base construction: standing tanks with lids, on pipe feet Features: electric heating rods, temperature sensor, stand hose for content display, automatic gassing, ladder bracket, internal piping, control box

Condition: used, Year of construction: 1995, Premixer, manufacturer Famix Falterbaum, for 30,000 l/h, with 2 stainless steel tanks, dosing pump by Bran&Luebbe plus 2 additional pumps, control cabinet, IDM retrofitted in 2011, all mounted on base frame, Dsdpfeyzhzrex Abwocf

Condition: used, Year of construction: 1980, Premixer, manufacturer Famix Falterbaum, capacity 5,000 l/h, 2-component: syrup + water + CO2, with 2 stainless steel tanks, dosing pump from Bran&Luebbe + 2 additional pumps, with fine filter, control cabinet, all mounted on a base frame. L: 1,500 mm, W: 1,300 mm, H: 2,200 mm. Djdpfxoyzhxqj Abwecf

Condition: used, Premixer, manufacturer: Falterbaum, model: Famix, 4,000 l/h, 2-component: with 2 stainless steel tanks, dosing pump and vacuum pump, mounted on a stainless steel base frame. Dcedpsyzhwgjfx Abwjf

Condition: used, Year of construction: 1974, Additional title: horizontal pressure tank Capacity: 150 hl Dsdpfx Asyzhv Njbwocf Operating pressure: 4 atm Operating temperature: 20 °C Material: Stainless steel Position: horizontal Features: Internal piping for heating; level indicator; CIP connection; thermometer; sampling valve

Condition: used, Filler, manufacturer: KHS / H+K, type: Delta VVF 90/16, rated output up to 38,000 bph, operated at 24,000 bph, with 90 filling valves, with double pre-evacuation, vacuum pump, high-pressure injection, motorized height adjustment, with CIP caps, residual liquid control before filler infeed, with 16-head crowner including crown cap feeder, running direction: left to right, year of manufacture: 1982, retrofitted with new S7 control system in 2004. Dedpfoyzhqtjx Abwecf

Condition: used, Year of construction: 1991, Bottle filler, manufacturer SEN, type Combi-RE H2, with 30 filling stations and 6-digit crowner, set up for 0.5 l + 0.33 l NRW Longneck + 0.5 l EURO bottles, running direction: left to right, discharge table, various spare parts, S5 control, incl. operating manual, year of manufacture 1991, already dismantled. Dsdpfx Aeyzhmusbwscf

Condition: used, Bottle filler for mineral water, manufacturer KHS / SEN, model: VVF-90-KK16-SV16, equipped with 90 filling valves, 16-head crown corker, and 16-head screw capper, capacity: 35,000 bottles/h, for 0.7 l GDB / 0.25 – 0.75 l Gastro / + 0.5 l NRW bottles. Djdpfx Aoyzhicobwecf

Condition: used, Year of construction: 1995, Cleaning machine, manufacturer PAC, for 3,000 bottles/hour, suitable for bottles with diameter 90mm and height 262mm, equipped with 2 lye baths, hot and cold water and fresh water bath, year of manufacture 1995, for sale. Dcsdpsyzg Sisfx Abwof

Condition: new, We build your premixer! Dcedpfxsyzf Uio Abwef Our field-proven MultiMix is available in various configurations. Your benefits: • Small footprint, on stainless steel base frame, easy to clean. Nominal capacities from 3,000 to 10,000 l/h • Automatic water pressure degassing with vacuum degassing • Fully automatic syrup Brix dosing via a proven gravity-venturi mixing tube system • Reliable CO₂ carbonation with high-pressure pump and temperature-pressure dosing • Fully automatic CIP function • Digitalization with recipe management and syrup blending documentation • Two-component water CO₂ and syrup, optional 3 to 5 components possible • In-house pressure vessel manufacturing with TÜV certification • Intuitive operation via touchscreen and remote maintenance module

Condition: used, Year of construction: 2003, Cleaning machine, manufacturer: GM Gera, type: Arcade, for 24,000 bottles/h, adjustable range 7,600 – 26,400 bottles/h 25 bottles/row basket pitch 95 mm, chain pitch 140 mm with Siemens S7 control system Dcodoyzdq Nspfx Abwsf dismantled, available for inspection at warehouse

Condition: used, Year of construction: 2017, Overview This GERNEP Soluta 6-480/2 1SK TaxU labelling machine was manufactured in 2017 and is designed for the application of self-adhesive labels in beverage bottling lines. The machine is configured with one self-adhesive labelling station and is specifically adapted for swing-top (bail closure) system is equipped with a HERMA labelling unit and supports a capacity of up to 2,500 bottles per hour, with a variable speed range from 800 to 3,000 bottles per hour. The machine is designed for U-seal label application and includes alignment systems for proper positioning of swing-top closures. With modern control technology based on Siemens S7-1200 and a Sütron touch panel, the machine offers reliable operation and easy integration into existing production lines. Technical Data Direction of operation: RM Capacity: approx. 2,500 bottles per hour Speed range: approx. 800 – 3,000 bottles per hour Labelling technology: Self-adhesive Labelling station: 1 × self-adhesive labelling unit (HERMA) Label speed: approx. 40 m/min Roll diameter: 300 mm Label height: up to 240 mm Bottle Formats Bottle types: Swing-top (bail closure) bottles, other bottles also possible 500 ml – Ø 66 × 280 mm 1,000 ml – Ø 85 × 316 mm Label Data Label dimensions: approx. 160 × 17 mm Application type: U-seal label Electrical Data Control system: Siemens S7-1200 Operator panel: Sütron 7” Power supply: 400 / 230 V Frequency: 50 Hz Equipment / Features Alignment system for swing-top closures  Bottle orientation system in infeed star Conveyor height: approx. 1,000 mm Electrical cabinet lighting Socket integrated in control cabinet. Djdpfx Absyzc H Njwjcf

Condition: used, Year of construction: 2026, Overview This blowmoulder, filler and capper combiblock was manufactured by ACMI (Italy). The machine can be operated fully floor level and is a very good solution offering the advantage of a dual-cavity design (one mold = two bottles up to 70mm diameter) achieving an up to 17% reduced footprint vs equivalent output from traditional single-cavity equipment, improving production line accessibility. The increased output on smaller formats allows better utilisation of downstream equipment in the production line, resulting in improved ROI of total investment (100% additional output on smaller formats with less than 36% additional CAPEX). The BLO2FILL ESF 12/120/20 is designed for the production of PET bottles and subsequent filling and capping in a single integrated system. The machine is suitable for carbonated water, still water and carbonated soft drinks.  Technical data Capacity: up to 48,000 bph (500 ml PET) Formats: 500 ml PET bottles Application: Blowing, filling and capping of PET bottles Configuration: Rotary stretch blow moulding machine SBF412 (2-cavity configuration) Electronic-volumetric filler with 120 valves Fully electronic capper (FEC) with 20 heads Neck finish: 26/22 GME 30.40 Cap type: Plastic screw flat / press-on caps Filling technology: Electronic-volumetric Products: Carbonated water, still water, carbonated soft drinks CO₂ content: up to 8.5 g/l Max. filling temperature: up to 18°C (carbonated water), 25°C ambient, 12°C (soft drinks) Scope of Delivery Blowmoulder | Acmi | SBF412 | Rotary stretch blow moulding machine (2-cavity) - 100% r-PET and lightweight preform compatible Filler | Acmi | ESF | Electronic-volumetric filler with 120 valves Capper | Acmi | FEC | 20-head capper for screw and press-on caps Cap Feeder | Operator level waterfall orientation and feeding Preform orienter |Operator level preform feeding Preform insertion control | Control system Blowing air recovery system | For pre-blow and line Cooling system | Water recirculation on combo interface Automation package | PLC teleservice, Ethernet, UPS, remote access Lubrication system | Automatic centralized lubrication Foaming unit | Automatic system Dcjdpfjyzc Hpox Abwef

Condition: used, Year of construction: 2008, Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically triggers a reject mechanism if contamination is detected. Technical Data Construction: Stainless steel frame for hygienic industrial use HMI: Integrated touchscreen for operation, calibration, and product changeover Electrical Data Power supply: AC 230 V, single phase Current: 11.0 A Frequency: 50 / 60 Hz Inspection Function Detection of foreign bodies: Metal Glass Stones High-density plastics Additional capabilities: Product integrity verification Detection of missing components Density-based inspection Dsdsyzc D Ujpfx Abwjcf

Condition: used, Year of construction: 2021, Overview This rotary cold glue labelling machine was manufactured in 2021 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, primarily in the beer industry. It is equipped with one cold glue labelling aggregate and is prepared for the installation of an additional unit. The system features a mechanical bottle table drive (control cam system) and a Krones glue pump for consistent label application. Technical data Capacity: approx. 5,000 bottles/hour Speed range: approx. 1,000 – 6,000 bottles/hour Formats: 0.33 L / 0.5 L glass bottles Application: Labelling of glass bottles (beer) Configuration: Rotary machine with 1 cold glue labelling aggregate (prepared for 2nd unit) Label positions: Body / wrap label, neck / chest label Utilities: 400 V / 50 Hz / GND / N Scope of Delivery Labelling machine | GERNEP | Labetta 4/3/8 480 1A | 2021 | Rotary cold glue labeller with 1 aggregate (prepared for second unit) Glue system | Krones | Glue pump Control system | GERNEP | Touch panel Dcodpfsyzcyvjx Abwof

Condition: used, Year of construction: 2019, Overview This rotary cold glue labelling machine was manufactured in 2019 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, particularly in the wine industry. It is equipped with two cold glue labelling aggregates for the application of body, neck ring and back labels. The machine features a servo-driven bottle table and a Krones glue pump for precise label application. Technical data Capacity: approx. 5,000 bottles/hour Speed range: approx. 1,000 – 5,500 bottles/hour Formats: 0.75 L Bordeaux (H=309 mm, Ø74 mm) 0.75 L Schlegel (H=330 mm, Ø76 mm / H=350 mm, Ø78 mm) 1.0 L Schlegel (H=309 mm, Ø89 mm) 0.75 L Burgunder (H=297 mm, Ø82 mm) Application: Labelling of glass bottles (wine) Configuration: Rotary machine with 2 cold glue labelling aggregates Label positions: Body (front), neck ring, back Utilities: 400 V / 50 Hz / 3 Phase / N / PE Scope of Delivery Labelling machine | GERNEP | Labetta 4/3/12 784 2A SD | 2019 | Rotary cold glue labeller with 2 aggregates Glue system | Krones | Glue pump Control panel | GERNEP | Touch panel Dcsdpfx Aboyzcycowjf

Condition: used, Year of construction: 2001, Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data Capacity: approx. 40 trays/min Formats: 24 × 0.5 L cans 15 × 0.33 L sleek cans 4 × 6 × 0.33 L bottles 6 × 4 × 0.33 L bottles 8 × 3 × 0.33 L bottles 3 × 6 × 0.5 L bottles Application: Packaging of cans and bottles Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink tunnel Conveyor system | Gebo | Integrated product transport Control panel | Siemens | SIMATIC OP17 | Operator interface Djdpfx Aoyy Sqzsbwecf

Condition: used, Year of construction: 2011, Overview This rotary labelling machine (cold glue + self-adhesive) was manufactured in 2011 by Germany GERNEP. The machine is designed for high-speed labelling of glass bottles, particularly in the spirits industry. It combines cold glue and self-adhesive labelling technologies, allowing flexible application of multiple label types including body, back, neck ring and additional labels. The machine is equipped with 2 cold glue aggregates and 2 self-adhesive labelling units (HERMA). Technical data Capacity: approx. 12,000 bottles/hour Speed range: approx. 3,000 – 18,000 bottles/hour Formats: 700 ml / 750 ml / 1,000 ml glass bottles Application: Labelling of glass bottles (spirits) Configuration: Rotary machine, 2 cold glue units + 2 self-adhesive units (HERMA) Label positions: Body (front), back, neck ring, additional labels Utilities: 400 V Scope of Delivery  Labelling machine | GERNEP | Labetta 6/4/22 1056 2A 2SK SD | 2011 | Rotary labeller with cold glue and self-adhesive units Self-adhesive units | HERMA | 2 units, up to 70 m/min Control system | B&R | Touch panel control Dcsdpfxeyy Ad So Abwef

Condition: used, Year of construction: 2013, Overview This high-performance can filling line was manufactured in 2013 by KHS and is designed for large-scale beverage production, particularly beer in aluminum cans. With a capacity of up to 48,000 cans per hour (500 ml), the line represents a modern, high-speed solution including depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The core of the line consists of a KHS Innofill DVD 92 volumetric filler combined with a Ferrum F708G high-performance seamer, ensuring precise filling and reliable closing at maximum output rates. The line has been well maintained and remained in production until February 2026, and is available from Q1 2026. The overall installation features a compact, high-density layout with advanced conveyor and process integration, typical for modern KHS canning lines. Technical Data Capacity: 48,000 cans per hour (500 ml) 41,000 cans per hour (568 ml) Container type: Aluminum cans Formats: 500 ml 568 ml Can dimensions: Diameter: 66.30 mm Height: 168 mm Lid specifications: Material: Aluminum Diameter: 59.44 mm Height: 2.07 mm Product: Beer Filling technology: Volumetric pressure filling with MID (magnetic inductive flow meters) Seaming technology: High-speed multi-head can seamer Pasteurization: Flash pasteurizer (KZE system) Condition: Very good condition, regularly maintained Availability: Q1 2026 Scope of Delivery Depalletizer | KHS | INNOPAL ASH-LD | Layer depalletizer with pallet lift; up to approx. 450 layers/h | 2013 Filler | KHS | INNOFIL DVD 92 | Volumetric pressure filler with MID technology; up to 48,000 cph | 2013 Seamer | Ferrum | F708G | High-speed can seamer with 8 stations; up to approx. 60,000 cph | 2013 Lid Feed System | NSM Magnettechnik | – | Automated lid feeding and distribution system | 2013 Flash Pasteurizer | KHS | INNOPRO KZE 250 | Continuous flash pasteurization with buffer tank | 2013 CIP System | KHS | INNOPRO CIP | Multi-tank CIP system (1,000 – 3,000 L) | 2013 Fill Height Inspector | KHS | Innocheck CUB | Fill level and closure inspection system | 2013 Printer | Leibinger | JET3up | Continuous inkjet printer for coding | 2013 Checkweigher | Radwag | DWT/RC 30 HP | Dynamic weight control system | 2013 Shrink Packer | KHS | INNOPACK SP A-M | Film shrink packer; pad + film capability | 2013 Pack Conveyor | KHS | INNOLINE GTR | Pack transport system | 2013 Can Conveyor | KHS | INNOLINE BTR | Can transport system | 2013 Pallet Conveyor | KHS | INNOLINE PTR | Pallet transport system | 2013 Pallet Warehouse | KHS | INNOLINE MPH 1-1 | Pallet buffer and storage system | 2013 Palletizer | KHS | INNOPAL PB1N1 | Automatic palletizing system | 2013 Pallet Wrapper | ROBOPAC | Genesis Futura 40 | Automatic ring wrapper; up to 95 pallets/h | 2020 Dcsdpfx Aeyyviuobwjf

Condition: ready for operation (used), Year of construction: 1993, A two-component premix system H-Falterbaum (Famix) for the production of soft drinks from water and syrup with carbonation is available. Mixing capacity: 6000l/h, degassing: vacuum degassing, max. vessel pressure: 6.5bar, machine dimensions X/Y/Z: approx. 2500mm/1250mm/2500mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible. Dcjdpeyypmasfx Abwof

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 FOR HELICAP 23 PRO: YOM 2019 VERSION 400v 9.000 RUNNING HOURS Dsdpfjyynd Rsx Abwecf NEW CONDITION THE MACHINE IS IN PRODUCTION TILL MAY 15TH.

Condition: used, Year of construction: 2017, Overview  This robot palletizer system was manufactured in 2017 by Italy BEMA. The system is designed for palletizing Bag-in-Box products (5L and 19L) for water and syrup applications. It consists of a robot palletizing system with Fanuc control, pallet magazine and stretch wrapper. The machine was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The system is fully operational, is available immediately, and can be visited on request. Maintenance was carried out twice per year. Technical data  Capacity: 5L BIB: 650 BIB/h – 7 pallets/hour 19L BIB: 420 BIB/h – 13 pallets/hour Formats: 5L / 19L Bag-in-Box Application: Palletizing of water and syrup products Configuration: Robot palletizer with Fanuc R-30iB system, pallet magazine, stretch wrapper Scope of Delivery  Robot palletizer | BEMA | FANUC R-30iB | 2017 | Palletizing robot system Stretch wrapper | BEMA | SILKWORM LS | 2017 | Pallet stretch wrapping unit Pallet magazine | 2017 | Pallet handling system Tooling set | 2017 | 2 tools for 5L and 19L BIB Dcodpfeyyl S Eox Abwsf

Condition: used, Year of construction: 1998, Overview The FAMIX 35000 deareator and decarbonater was built in 1998 by the German manufacturer H. FALTERBAUM FAMIX-MASCHINENBAU GMBH. The machine was in use in a mineral water company in Germany. Due to a restructuring of the complete company, new filling lines will be purchased and this machine becomes available for sale. The machine is still assembled on site and under power. Tech Specs: Capacity: 35,000 l/h Control: Siemens S5 Specialty: Spare parts available Technical documentation available Dcedpfeyylv Rex Abwsf