ZPHU Blachmix

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 7402-09-03006-03, spindle bore: 90 mm, center height: 325 mm, center width: 3,000 mm, rotational speed (max.): 2,000 rpm, controller model: SIEMENS SINUMERIK 810D, TECHNICAL DETAILS Gujdpfx Acszc Hmnofjc Swinging diameter over bed: 630 mm Swinging diameter over carriage: 380 mm Center height: 325 mm Distance between centers: 3,000 mm Carriage overhang on bed: 700 mm Bed width: 520 mm Longitudinal travel X-axis: 355 mm Longitudinal travel Z-axis: 3,000 mm Tailstock spindle diameter: 100 mm Tailstock spindle travel: 180 mm Maximum workpiece weight between centers: 3,000 kg Maximum workpiece weight in cantilever mode: 500 kg Spindle bore: 90 mm Spindle mounting: DIN 55027/8 Spindle taper: 120 mm Front spindle bearing: 130 mm Main drive power 100% ED / 40% ED: 12 / 18.5 kW Maximum torque: 2,400 Nm Speed: 2–2000 rpm Speed ranges: 3 Range 1: 2–220 rpm Range 2: 50–660 rpm Range 3: 100–2000 rpm Speed control: 50–120 % MACHINE DETAILS Control system: SIEMENS SINUMERIK 810D Load display on screen: 0–140 % Main drive: 10 kW Power supply: 3 × 400 V / 50 Hz Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 5,600 x 1,950 x 1,850 mm Machine weight: approx. 5,500 kg

Condition: ready for operation (used), A CNC vertical lathe Jungenthal is available. Gear stages: 2, max. speed: 160rpm, max. workpiece height: 800mm, chuck jaws: 6, faceplate diameter: 2000mm, motor power: 50kW, control: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible. Gusdpfx Aezcyqgocfjc

Year of construction: 1992, condition: ready for operation (used), A universal CNC cycle lathe Boehringer is available. Center height: 280mm, swing diameter over bed/cross slide: 570mm/365mm, turning length: 1000mm, distance between centers: 1500mm, quill diameter: 80mm, quill travel: 190mm, spindle speed: 2500rpm, bed width: 360mm, rapid traverse X/Z: 5m/min/10m/min. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2400mm, weight: approx. 4000kg, control system: Siemens. Documentation available. An on-site inspection is possible. Guedpfx Acozcyqysfjc

Year of construction: 2007, condition: ready for operation (used), Max. turning diameter: 12mm, max. turning length: 200mm, rated current: 40A, mains voltage: 200V, connected load: 8kVA, weight: 2.1t, with sub spindle, driven tools, bar feeder. An on site inspection is possible. Gedpfjzcfhkex Acfeuc

Year of construction: 2000, condition: ready for operation (used), Controls: Mitsubishi, weight: 2.53t. Equipment: counter spindle, tool turret with driven tool stations, linear slide with driven tools, bar feeder interface, tool set and setting tools, spindle monitoring EWL 4444. An on site inspection is possible. Godszcfhqspfx Acfeuc

Year of construction: 2000, condition: ready for operation (used), Controls: Mitsubishi, weight: 2.2t. Equipment: main spindle with guide bush system, counter spindle, two C axes, several driven tools, front machining and rear side machining, tool block for cross machining, automatic parts catcher, bar feeder connection, tool cabinet with original setting tools, spindle monitoring EWL 4444, high pressure coolant supply, extraction connection. An on site inspection is possible. Godpfxszcfh Ro Acfjuc

Year of construction: 2007, condition: ready for operation (used), Equipment: main spindle, counter spindle, upper and lower tool turret or upper and lower machining unit, parts catcher, workpiece conveyor, coolant/filter system, separate coolant or hydraulic tank, bar feeder, handheld control unit. Bar diameter: 65mm, full load current: AC 194/176A, main switch power connection: 200A, connected load: 67.2kVA, control: FANUC Series 18i-TB, weight: 8.5t, operating hours control on: 89,800h, automatic time: 68,024h, feed time: 32,377h, including AME HA 180-4 cyclone filter system with two coolant pumps 2x 5/25bar, the machine was completely overhauled in 2024 and is fully functional. An on site inspection is possible. Guodpfxjzcflis Acfjc

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 250 mm, quill diameter: 60 mm, quill travel distance: 140 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, machine/vehicle number: 2818.02, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 230 mm Travel range X-axis: 250 mm Spindle head according to DIN 55027: A6 Spindle bore diameter: 64 mm Spindle diameter in the front bearing: 100 mm Speed range: 1–4,000 rpm Feed range, facing: 0.001–1,000 mm/rev Feed range, longitudinal and thread pitches: 0.001–2,000 mm/rev Rapid traverse, facing: 5 m/min Rapid traverse, longitudinal: 10 m/min Feed force, facing: 5,000 N Feed force, longitudinal: 7,000 N Tailstock Arbor diameter: 60 mm Arbor travel: 140 mm Taper: MK 4 Gujdpfezb Hf Uox Acfsc MACHINE DETAILS Main spindle drive Power, digital AC motor at 40% duty cycle: 16 kW Power, digital AC motor at 60% duty cycle: 15 kW Power, digital AC motor at 100% duty cycle: 12 kW Gear stages: 2 Standard chuck size 1: 200 mm Standard chuck size 2: 250 mm Three-phase voltage: 400 V Frequency: 50 Hz Operating hours (according to meter): 4,521 h

Year of construction: 1977, condition: ready for operation (used), Two Schütte six-spindle turning machines including one Iemca bar feeder are available. 1) Schütte SF 42, year of manufacture: 1977, number of spindles: 6, max. bar capacity: 42mm, max. longitudinal slide stroke: 125mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 6500mm/1400mm/2200mm, weight: approx. 10000kg. Including pick-off spindle, cams, collets, chip conveyor, oil mist extraction system and Iemca PRA40/33/P bar feeder. 2) Schütte SF 51 DNT, year of manufacture: 1987, max. bar capacity: 51mm, number of spindles: 6, max. turning length: 102mm, max. drilling depth: 102mm, spindle circle diameter: 340mm. Including pick-off spindle, CNC cross slide in position 4, cams, collets, auxiliary coolant pump and chip conveyor. Documentation available. An on-site inspection is possible. Guedpfx Ajzbuuwscfec

Condition: used, Year of construction: 1995, machine/vehicle number: 175054018, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Gsdpfxsza S H Uo Acfouc Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Year of construction: 1999, condition: ready for operation (used), Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible. Gedjza E Sqopfx Acfsuc

Year of construction: 2007, condition: used, machine/vehicle number: IntNr231611, CNC lathe NILES-SIMMONS N30/3 - 3500, year of manufacture 2007 High-precision, double-sided, heavy-duty machining 2 spindles, 2 turrets Technical details & performance data Control system: Siemens Sinumerik Si 840D Max. turning length (nominal length) 3,500 mm Swivel diameter over bed approx. 780 mm Swivel diameter over slide approx. 720 / 750 mm 1st and 2nd spindles Max. spindle speed up to 3,000 rpm (variable) Drive power (S1-100% / S4-40%) approx. 64 kW / 78 kW Max. torque up to 3,135 Nm Tooling system Gedpfjza D E Njx Acfsuc Tool holder / turret 12-station / 16-station turret (VDI 50 / 60 or axial/radial) Travel ranges & dynamics X-axis -12 to +423 mm Rapid traverse speeds (X / Z) 18 / 30 m/min 2 x NC-controlled steady rest slides for optimum support High-performance articulated belt chip conveyor with coolant system Documentation, circuit diagrams and CE certificate The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Gusdpfxjza Alhs Acfoc Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: used, functionality: fully functional, Classic universal lathe T6 in Howaldt design. Robust and reliable workshop machine for daily use – sought after in this segment because it can do everything that smaller hobby machines cannot. Three-jaw chuck mounted, tailstock spindle precisely adjustable, bed shows typical signs of use, but no grooves that would affect precision. Gusdpfxozabhno Acfjc Suitable for locksmithing, mechanics, car restoration, and mechanical engineering repairs. Wiring diagram and feed/thread table on the spindle housing are still legible. Technical specifications: - Model: T6-HOWALDT (T) - Speed ranges: 4 x 4 (45/65/90/130 / 170/240/340/500 / 650/900/1300/1800 rpm) - Threads: metric / inch / module - Spindle bore: approx. 38-52 mm (to be checked on site) - Drive: three-phase 400 V - Control box: original with speed/feed table - Inventory number: 5001 (available) Collection / Transport: Self-collection with forklift (from 3 tons) or truck with loading crane. Loading possible on site. Shipping via freight forwarder by arrangement.

Condition: used, functionality: fully functional, The legendary Russian 16K20 universal lathe – valued worldwide in industry and training workshops as a robust and durable classic. Widely used in the metal industry, repair shops, and mechanical engineering. Massive cast steel construction, standard control with reversing gearbox, and taper guide preparation are typical features of the 16K20. Ideal for a professional repair shop, a metalworking shop handling larger workpieces, a training facility, a collector/restorer, or for the ambitious DIY enthusiast with a real workshop. The original nameplate is still legible (factory number 00052). Technical specifications: - Model: 16K20 Gujdpey U Uzfofx Acfjc - Distance between centers: typically 710 / 1000 / 1500 mm (please verify the variant on site) - Height of centers: approx. 215 mm (swing diameter approx. 400 mm) - Spindle bore: approx. 52 mm (standard 16K20) - Speed range: approx. 12.5 - 1,600 rpm (multi-stage) - Feed/threading: metric, inch, module, diametral - Drive: three-phase 400 V - Weight: approx. 3,000 kg (heavy transport required) Collection/transport: Self-collection with heavy-duty loading. The machine should be loaded with a crane fork / heavy forklift with a capacity of 5 tons or more. Shipping by freight forwarder on a low-bed trailer is possible upon agreement.

Year of construction: 1988, condition: ready for operation (used), Interface: RS232C, connected load: 21kVA, control system: Okuma OSP 5000 L-G, length: 2900mm, width: 1800mm, height: 1720mm, weight: 4.5t, ball screw of the X-axis has 0.2mm backlash, regularly maintained, with chip conveyor. An on-site inspection is possible. Gjdpfjy U Nq Usx Acfjuc

Year of construction: 2003, condition: ready for operation (used), Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch change parts, installation aid base body, Hainbuch manual changing device, counter spindle: counter spindle as motor spindle, C-axis, device for counter clamping pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool carrier, driven tools, electronic gearbox, X3 cross axis for front attachment, 5-position front attachment and cut-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant lubrication system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining station, Knoll VRF 150/750 vacuum rotary filter (suitable for aluminum, plastic, brass and steel), flushing gun, connected load: 33kW, control system: TX8i (64bit), flat screen 10.4 inch, additional piece counter, V24 RS232 and MDE interface in the control cabinet, operating hours: 124,705h, with FMB TURBO 5-42XT/3200/C bar feeder magazine, chip conveyor, coolant unit and basic equipment of static and driven tool holders. An on-site inspection is possible. Gusdpfxsy U Nq Is Acfoc

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Gsdpfjy U Nqnex Acfjuc

Condition: used, Year of construction: 1996, operating hours: 22,400 h, functionality: fully functional, machine/vehicle number: 474, -Weiler -E50/1 -No.: 474 -Year of manufacture: 1996 -Operating hours: approx. 22,400 -Voest-Alpine Steinel control system (the control system likely operated via a separate desktop PC) -Includes chip conveyor, various tool holders, and tools Shipping possible upon request. Guedpfey U Iqgox Acfoc Sale only to commercial businesses. Stated purchase price = net price plus 19% VAT = €9,282.00 gross.

Year of construction: 1984, condition: ready for operation (used), Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible. Gedpfxjy Uyf Nj Acfsuc

Condition: ready for operation (used), Offered is a conventional lathe. Center height: 190mm, swing diameter over bed: 380mm, speed range: 27-1000rpm, speed stages: 12, thread types: metric, Whitworth, module, feeds: Norton gearbox, spindle mount: bayonet, operation: manual, control system: manual. Equipped with 3-jaw chuck, chuck guard with safety screen, four-position tool holder, lead and feed screw cover. Weight: approx. 1200kg, overall dimensions X/Y/Z: approx. 2000mm/1000mm/1300mm. Inspection possible by arrangement. Gujdpfx Acsy Ulncefoc

Year of construction: 1996, condition: ready for operation (used), Offered is a slant bed CNC lathe. Bar capacity: 65mm, travel X/Z: 160mm/510mm, control system: Siemens Sinumerik. Equipped with bar loading magazine. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 2800mm/1800mm/1900mm. Inspection possible by arrangement. Godoy Ulnispfx Acfjuc

Year of construction: 1995, condition: ready for operation (used), Power supply: 75A, connected load: 35kW, control system: Traub SYSTEM TX 8F, weight: approx. 4.5t, operating hours: 84,126h, the machine has problems when machining inclined surfaces. An on-site inspection is possible. Guedpsy Tx Rzsfx Acfsc

Condition: ready for operation (used), Center distance: 2000mm, center height: 280mm, swing over bed: 560mm, swing over gap: 785mm, swing over carriage: 350mm, bed width: 350mm, spindle bore: 105mm, spindle speed range: 25-200/ 200-1500rpm, longitudinal feed range: 0.059-1.646mm/rev, cross feed range: 0.020-0.573mm/rev, metric threads: 0.2-14mm, quill diameter: 75mm, quill travel: 180mm, quill taper: MT 5, motor power: 7.5kW, length: 3340mm, width: 1150mm, height: 1460mm, weight: 2.72t. Equipment: 3-axis digital readout ES-12 V with LCD display, 3-jaw chuck PS3-315mm / D8, max. steady rest passage diameter: 180mm, max. follow rest passage diameter: 120mm, foot pedal with brake function according to CE, protective device for quick-change tool post, LED machine light, initial filling with Shell Tellus 46, two center points, frequency inverter, digital speed display, slip clutch, rapid traverse longitudinal and cross, coolant system, quick-change tool post with 4 holders, change gears, reduction sleeve, chip splash guard, operating tools. An on-site inspection is possible. Gujdpfxsy Tx Nwo Acfjc

Year of construction: 1994, condition: ready for operation (used), A CNC production turning machine is offered. Working area bar capacity: 65mm, max. turning length: approx. 150mm, tool turret: 14 stations, control: C200. Equipped with automatic bar feeder magazine (type MBF), chip conveyor with integrated coolant cleaning system, compressed air connection, hydraulic chuck, signal light. Weight: approx. 5500kg, overall dimensions X/Y/Z: approx. 8500mm/2100mm/2200mm (incl. loading magazine). Inspection possible by arrangement. Guodpfoy Tx Sfox Acfoc