Samo Sas

Condition: used, Year of construction: 2007, functionality: fully functional, 6-spindle Hainbuch Spanntop Axfix D22 ARTIS integrated process monitoring system Slide units - Slide unit 1.1: X-axis fixed, Z-axis NC-controlled - Slide unit 2.1: X-axis fixed, Z-axis NC-controlled - Slide unit 1.2: X-axis and Z-axis NC-controlled - Slide unit 2.2: X-axis and Z-axis NC-controlled - Slide unit 3.1: X-axis and Z-axis NC-controlled - Slide unit 3.2: X-axis and Z-axis NC-controlled - Slide unit 4.1: X-axis and Z-axis NC-controlled - Slide unit 4.2: X-axis and Z-axis NC-controlled - Slide unit 5.1: X-axis and Z-axis NC-controlled - Slide unit 5.2: X-axis and Z-axis NC-controlled - Slide unit 6.1: swiveling axis and Z-axis NC-controlled - Slide unit 6.2: X-axis and Z-axis NC-controlled Synchronization device, position 6.1 Part discharge via chute Workpiece conveyor belt at spindle position 6 High-pressure pump Fire extinguishing system Coolant cleaning system Hinged belt chip conveyor Hedpfxoyymbzj Abwok Flat loading magazine: IEMCA SIR MS 22/33 P

Condition: excellent (used), Year of construction: 2007, operating hours: 77,264 h, functionality: fully functional, number of spindles: 6, spindle speed (max.): 10,000 rpm, bar diameter (max.): 22 mm, Equipment: rotational speed infinitely variable, 6-spindle machine Part discharge via chute at spindle position 6 Option for polygon turning Collet holders renewed Hodpeyymadsfx Abwek Chip conveyor Magazine IEMCA SIR MS 22 C / 33 P

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43, turning diameter over cross slide: 32 mm, number of spindles: 6, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Swing diameter over cross slide: 32 mm Max. spindle speed: 3,150 rpm Number of spindles: 6 Round bar capacity: 32 mm Square bar capacity: 22 mm Hexagonal bar capacity: 27 mm Max. bar feed: 125 mm Max. travel long slide: 100 mm Hsdpeyybcaefx Abwjk Maximum number of parts: 35 Machining speed: from 1.12 s to 125 s Spindle speeds: from 200 rpm to 3,150 rpm Number (steps): 49 Machining time: from 0.63 s to 200 s MACHINE DETAILS Voltage: 50 Hz, 3x 380 V Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 3,850 x 1,390 x 2,200 mm Weight: approx. 8,000 kg EQUIPMENT Knoll AE 1114 high-pressure system Filtration system 5-bar and 40-bar pumps individually adjustable for processing stages Plate heat exchanger Lifting pump for chip conveyor

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: bar feeder, chip conveyor, A rebuild was carried out by Index for €380,000! EQUIPMENT Prepared as a double 3-spindle machine Part pick-off device Thread cutting gearbox Cucci Giovanni integral loader Brankamp tool breakage monitoring and tool monitoring Cucci Giovanni bar feeder (2015) Knoll chip conveyor (2015) Hodpfx Aoyx Tzrobwsk

Condition: ready for operation (used), Year of construction: 2003, operating hours: 7,375 h, spindle motor power: 22,000 W, spindle speed (max.): 3,500 rpm, bar diameter (max.): 71 mm, total width: 2,300 mm, total height: 2,100 mm, travel distance X-axis: 200 mm, overall weight: 8,000 kg, product length (max.): 5,000 mm, number of axes: 4, This 4-axis MORI SEIKI RL2500 was manufactured in 2003. It features a maximum turning diameter of 400 mm and includes two turrets with 12 stations each, providing efficient machining capabilities. The machine is equipped with a Mori Seiki MAPPS MSX-501 control and has a spindle speed of 3500 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI RL2500 multi-spindle turning machine we have for sale. Contact us for further details. Hjdpeyx D Ebefx Abwjk • Spindles: 2 • Turrets: 2 (12 stations each) • Max turning diameter: 400 mm • Z travel: 265 mm (per turret) • Main spindle cutting time: 7,375 h • Second spindle cutting time: 9,801 h Additional equipment • Chip conveyor • Transformer • Robotic loading system Technical Specification Driven Tools No Counter Spindle No

Condition: used, TORNOS MULTIDECO 20/6b is a CNC Multi-spindle turning lathe engineered for high-precision machining with excellent accuracy and reliability. Key capacities: 17 axes total, 6 cross slides, 5 plain turning slides, longitudinal carriage way 160 mm, 6 spindles + 1 back spindle, round bar capacity Ø 5–20 mm, max workpiece length 100 mm, production rate 45 pcs/min. Technical specs: stepless spindle speeds up to 5000 rpm, spindle power 15 kW, total installed power 43 kVA, supply 3x 400 V 50 Hz, machine weight ≈8500 kg, dimensions L3500×W1600×H1950 mm. Equipment: ROBOBAR bar feeder type MSF 522/6, coolant system, chip conveyor, pick-up spindle, spindle stop device, lamp and status light. Delivers tight tolerances; suitable for automotive, watchmaking, toolmaking, aerospace and medical industries. Hjdpfx Aeyxny Aebwjk

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: AS141109, number of spindles: 6, spindle speed (max.): 6,000 rpm, bar passage: 14 mm, bar diameter (max.): 14 mm, total width: 2,150 mm, total length: 1,466 mm, total height: 820 mm, turning length: 30 mm, Cam-controlled multi-spindle automatic lathe TORNOS AS14 – completely overhauled in 2016 with a new Knoll chip conveyor! Retrofit year: 2017 Chip conveyor: Knoll, 2018 Machine counter: 1,852,409 parts produced (as of 19.12.25) Number of spindles: 6 Control: Cam-controlled Max. turning diameter: Ø14 mm Max. turning length: 30 mm Spindle speed: 6,000 rpm Spindle power: 7.5 kW Weight: 2,200 kg Dimensions (W x D x H): 2150 x 820 x 1466 mm Hjdpfx Ajyxnrfjbwjk Transport, collection and dismantling are to be organized by the buyer.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: AS14824, number of spindles: 6, spindle speed (max.): 6,000 rpm, bar passage: 14 mm, bar diameter (max.): 14 mm, total width: 2,150 mm, total length: 1,466 mm, total height: 820 mm, turning length: 30 mm, Cam-controlled multi-spindle automatic lathe TORNOS AS14 – fully overhauled in 2016! Retrofit year: 2016 Machine counter: 1,957,690 produced parts (as of 19.12.25) Number of spindles: 6 Control: cam-controlled Max. turning diameter: Ø14 mm Max. turning length: 30 mm Spindle speed: 6000 rpm Spindle power: 7.5 kW Weight: 2200kg Hsdpfxjyxnp Dj Abwek Dimensions (W x D x H): 2150 x 820 x 1466 mm Transport, collection, and disassembly must be organized by the buyer.

Condition: excellent (used), Year of construction: 2019, operating hours: 16,917 h, functionality: fully functional, machine/vehicle number: 11010081, bar diameter (max.): 22 mm, turning diameter: 22 mm, bar length: 3,000 mm, Equipment: documentation/manual, Year of manufacture: 2019 Operating hours: 16,917 h Control unit: C200 Solution Line, control panel with flat-screen monitor (47 cm diagonal) Maximum: 10 channels / 31 axes Based on SINUMERIK 840D sl Equipment: NC option synchronous spindle / polygon turning incl. electronic shaft Slide unit 1.1 (X-axis and Z-axis CNC-controlled) Slide unit 2.2 (X-axis and Z-axis CNC-controlled) Slide unit 3.1 (X-axis and Z-axis CNC-controlled) Slide unit 4.2 (X-axis and Z-axis CNC-controlled) Slide unit 5.1 (X-axis and Z-axis CNC-controlled) Slide unit 6.1 (Z-axis CNC-controlled) – synchronisation module Slide unit 6.2 (X-axis and Z-axis CNC-controlled) – back-working unit at position 6.2 Main spindle max. clamping diameter 22 mm Parts discharge via chute from spindle position 6 to the right Conveyor belt outside the machine including coolant return Bar feeder: IEMCA SIR MS22, integrated loading magazine Flat loader, 50 Hz D9-13-19-26 Bar length 3300 mm Material storage 200 mm support surface Additional storage chain for 20 bars Profibus-DP slave interface Cooling unit: Cooling capacity 29 kW at 38°C room temperature Hedpfxoyxnnae Abwjk Coolant R407c Chip conveyor: Hinged belt chip conveyor, 570 mm discharge height, left discharge, with lift pump for filtration system Chip trolley, fill volume 100 l Fire extinguishing unit: CO2 fire extinguishing system with optical fire detection, CO2 extinguishing tank with control unit Prepared for connection to a central oil mist extraction system Shut-off damper for central oil mist extraction system Electrics: Teleservice via VPN connection Chip breaking cycle "ChipMaster" Transport, dismantling, and collection are to be organized by the buyer.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 8,000 rpm, turning diameter: 18 mm, controller manufacturer: Siemens, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Hsdpfx Aoyxmrqobwek Turning diameter: 18 mm (16 mm) Spindle speed: 800 - 8,000 rpm Spindle circle diameter: 180 mm Main spindle drive power: 11 kW Torque: 18 Nm Bar feeder capacity: max. 80 mm Longitudinal slide travel: 50 mm (63 mm) Cross slide travel: 20 mm (32 mm) MACHINE DETAILS Control: Siemens Dimensions & Weight Space requirement approx.: 6.0 x 1.5 x 2.2 m Machine weight approx.: 5.5 t EQUIPMENT CO2 fire extinguishing system by Kraft&Bauer Ruez scraper belt conveyor IEMCA bar feeder PRA 52 42 F Tool package Cam package Various clamping devices Documentation Chip conveyor Coolant unit Parts discharge chute Signal lamp Interface for bar feeder Hydraulic unit

Condition: used, Year of construction: 1992, SCHÜTTE SF 26 DNT Max. bar diameter round / square: 26 / 19 mm Spindle pitch circle diameter: 270 mm Bar feed: 125 mm Longitudinal slide travel (total / work): 80 / 63 mm Cross slide travel (total / work): Upper: 40 / 25 mm Middle: 40 / 25 mm Lower: 50 / 31 mm Spindle speeds (stepless): 530 – 3,750 rpm Main times (stepless): min. / max. 0.72 – 100 s Secondary times: 0.90 – 1.1 s Creep speed: 3 rpm Main drive: 22 kW Dimensions (incl. bar guidance): approx. L x W approx. 7.2 x 1.6 m Weight: approx. 6.8 t Voltage: 400 V / 50 Hz Scope of delivery: Machine SCHÜTTE SF 26 DNT bar feeder Hedpfeyxcvxjx Abwsk

Condition: used, Year of construction: 1988, SCHÜTTE SF 32 Maximum bar diameter round / square: 32 / 22 mm Spindle circle diameter: 300 mm Bar feed: 125 mm Longitudinal travel (total / working): 100 / 80 mm Cross slide travel (total / working): Top: 50 / 33 mm Middle: 50 / 30 mm Bottom: 60 / 37.5 mm Spindle speeds (49 steps): Range I: 450 – 3,150 rpm Range II: 200 – 1,400 rpm Hjdpfxjyxcuus Abwok Workpiece feed per cycle: Normal: 60 – 425 Short: 33.5 – 236 Long: 95 – 670 Main times (35) per spindle revolution: Min. / Max.: 0.63 – 200 s Normal: 1.12 – 125 s Short: 0.63 – 71 s Long: 1.8 – 200 s Secondary times: 0.7 – 1.25 s Main drive: 18.5 kW Dimensions (incl. bar guide): approx. L x W 6.5 x 1.5 m Weight: approx. 8.3 t Voltage: 400 V / 50 Hz

Condition: used, Year of construction: 1988, SCHÜTTE SF 32 Maximum bar diameter round / square: 32 / 22 mm Spindle pitch circle diameter: 300 mm Hjdoyxcr Hopfx Abwok Bar feed: 125 mm Longitudinal travel (total / working): 100 / 80 mm Cross-slide travel (total / working): Upper: 50 / 33 mm Center: 50 / 30 mm Lower: 60 / 37.5 mm Spindle speeds (49 steps): Range I: 450 – 3,150 rpm Range II: 200 – 1,400 rpm Workpiece speeds per cycle: Normal: 60 – 425 Short: 33.5 – 236 Long: 95 – 670 Main times (35) per spindle revolution: Min. / Max.: 0.63 – 200 s Normal: 1.12 – 125 s Short: 0.63 – 71 seconds Long: 1.8 – 200 seconds Secondary times: 0.7 – 1.25 seconds Main drive: 18.5 kW Dimensions (incl. bar feeder): approx. L x W 6.5 x 1.5 m Weight: approx. 8.3 t Voltage: 400 V / 50 Hz Scope of supply: SCHÜTTE SF 32 machine Bar loader

Condition: used, Year of construction: 1986, SCHÜTTE SF 32 DNT Maximum bar diameter, round / square: 32 / 22 mm Spindle pitch diameter: 300 mm Bar feed: 125 mm Hodpeyxcplefx Abwsk Longitudinal travel (total / working): 100 / 80 mm Cross slide travel (total / working): Upper: 50 / 33 mm Middle: 50 / 30 mm Lower: 60 / 37.5 mm Spindle speeds (stepless): 450 – 3,150 rpm Main times (stepless): min. / max. 0.8 – 100 s Secondary times: 1 – 1.25 seconds Creep speed: 3 rpm Main drive: 22 kW Dimensions (incl. bar loader): approx. L x W: 7.3 x 1.6 m Weight: approx. 8.3 t Voltage: 400 V / 50 Hz Scope of supply: SCHÜTTE SF 32 DNT machine Bar loader

Condition: used, Year of construction: 1989, SCHÜTTE SF 32 DNT Max. bar diameter round/square: 32 / 22 mm Spindle circle diameter: 300 mm Bar feed: 125 mm Longitudinal slide travel (total/operational): 100 / 80 mm Cross slide travel (total/operational): - Lateral: 50 / 33 mm - Center: 50 / 30 mm - Lower: 60 / 37.5 mm Spindle speeds (stepless): 450 – 3,150 rpm Main times (stepless): min. / max. 0.8 – 100 s Hedpjyxckcsfx Abwok Secondary times: 1 – 1.25 s Creep feed: 3 rpm Main drive: 22 kW Dimensions (incl. bar feeder): approx. L x W 7.3 x 1.6 m Weight: approx. 8.3 t Voltage: 400 V / 50 Hz Contents consist of: SCHÜTTE SF 32 DNT machine Bar loader

Condition: used, Year of construction: 1991, SCHÜTTE SF 42 DNT Maximum bar diameter round / square: 42 / 36 mm Spindle pitch circle diameter: 340 mm Bar feed: 125 mm Longitudinal slide travel (total / working): 125 / 100 mm Cross slide travel (total / working): Top: 60 / 36 mm Middle: 60 / 36 mm Lower: 70 / 44 mm Spindle speeds (stepless): 315 – 2,240 rpm Main times (stepless): min. / max. 0.88 – 125 sec Secondary times: 1.1 – 1.4 seconds Creep speed: 3 rpm Main drive: 22 kW Dimensions (including bar guide): approx. L x W approx. 7.3 x 1.7 m Weight: approx. 10 t Voltage: 400 V / 50 Hz Scope of delivery: SCHÜTTE SF 42 DNT machine Bar loader Hedpfx Aeyxb Umsbwek

Condition: used, Year of construction: 1995, SCHÜTTE SF 26S DNT Maximum bar diameter, round / square: 26 / 19 mm Spindle pitch circle diameter: 270 mm Bar feed: 125 – 290 mm Longitudinal travel of slides (total / working): 125 / 98 mm Cross slide travel (total / working): Top: 40 / 25 mm Middle: 40 / 25 mm Bottom: 50 / 31 mm Spindle speeds (stepless): 530 – 3,750 rpm Main times (stepless): min. / max. 0.72 – 100 s Secondary times: 0.90 – 1.1 seconds Creeping speed: 3 rpm Main drive: 22 kW Dimensions (including bar guide): approx. L x W, approx. 7.2 x 1.6 m Weight: approx. 6.8 t Hodoyxb Ndspfx Abwsk Voltage: 400 V / 50 Hz Scope of delivery: SCHÜTTE SF 26S DNT machine Bar feeder

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 4,000 rpm, bar diameter (max.): 65 mm, number of axes: 9, This 9-axis Muratec MT200 multi-spindle turning machine was manufactured in 2019. It features a maximum bar capacity of 65 mm and a chuck size of 210 mm. The machine includes an impressive maximum feed speed of 24 m/min on the X-axis and 36 m/min on the Z-axis. If you are looking to get high-quality turning capabilities, consider the Muratec MT200 machine we have for sale. Contact us for further details. • Chuck size: 210 mm (8 inch) • Maximum swing: 205 mm (15 stations) / 228 mm (12 stations) • Maximum bar capacity: 65 mm (standard) / 80 mm (option) • Turret stations: 15 (upper and right) / 12 (lower) • Bar diameter: 65 mm (Standard) / 80 mm (Option) • Axis stroke (2-turret): • Upper turret: X 220 mm, Z 770 mm, Y +/- 40 mm • Lower turret: X 200 mm, Z 770 mm, Y +/- 40 mm • Right spindle (Zs): 880 mm • Maximum feed speed: • X axis: 24 m/min • Z axis: 36 m/min • Y axis: 12 m/min Hjdpfxoyvuxye Abwjk • Live tooling motor: 14.0 kW max (4.8 kW continuous) • Live tooling max speed: 4500 rpm • Spindle positioning: C axis control (+/- 0.015 degrees) Additional equipment • Gantry loader capacity: 140 mm x 105 mm (3 jaw), up to 8.0 kg x 2 (option) • Parts catcher capacity: 65 mm x 160 mm, 2.5 kg Technical Specification Counter Spindle Yes

Condition: excellent (used), Year of construction: 2011, The grinding machine is in very good condition and fully operational. Hsdpsyuyucefx Abwek

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Max. bar diameter : 20 [mm] - Spindle speeds : 3500 [rpm] - Spindle power : 15 / 18.5 [kW] COUNTER-SPINDLE Hsdpfx Abeyt Sl Rowsk - Counter-spindle position : 8 - Max. bar diameter : 20 [mm] - Travel : 160 [mm] - Max. part length : 75 [mm] - SLIDES - Number of transversal slides : 3 * Position : 1 / 8 / 9 * Stroke x, position 1 : 50 [mm] * Stroke X, position 8/9 : 65 [mm] - Number of crossed slides : 6 * Position : 2 / 3 / 4 / 5 / 6 / 7 * Stroke X x Z1 : 50 x 80 [mm] - Number of longitudinal slides : 1 * Position : 8 * Stroke Z2 : 160 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9600 x 2500 [mm] - Machine height : 2200 [mm] EQUIPMENT - CNC : FANUC PNC DECO - Chips conveyor - Coolant tank - Bar loader : Tornos

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 63 mm, rotational speed (max.): 3,750 rpm, overall weight: 6,800 kg, drilling depth: 63 mm, The machine comes complete with collets, holders, and other accessories! Hsdpfx Aeytf Ekobwsk TECHNICAL DETAILS Max. turning length: 63 mm Max. drilling depth: 63 mm Max. workpiece passage: 26 mm Max. workpiece feed: 125 mm Spindle speed range turning: 236 - 3,750 rpm Spindle speed range thread cutting: 13 - 1,875 rpm MACHINE DETAILS Required floor space: 7.16 x 2.3 m Height: 2 m Weight: 6,800 kg EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides 4 change gears for main and feed drive Service tools

Condition: used, Year of construction: 2000, Technical details: number of spindles: 6 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2000 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm pick-up unit, Spindle drum with hirth coupling, Hodpfx Abjyqwviowsk Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Hedpfxeyqv N Io Abwek Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2001, Technical details: number of spindles: 6 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Hedpfx Aoyqvlvsbwek Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2003, Technical details: number of spindles: 6 spindle passage: 36 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=36mm!!! Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; Hedpfoyqpqxjx Abwsk tooling included in delivery may differ from the images; various collets are included in delivery up to D36mm Please, contact us for getting more information and pictures on mail(at) or *