Hadmek

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, Hfedoz Srv Dopfx Aipsn low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: excellent (used), Year of construction: 2010, MaXXturn 65 SMY (Siemens) CNC TURNING CENTER FOR COMPLETE MACHINING WITH POWERED TOOLS, C-AXIS, AND Y-AXIS Linear guide system, digital drive system. Spindle motor (ISM) on the main and counter spindle with thermal compensation system (liquid-cooled). State-of-the-art control technology SINUMERIK 840D with ShopTurn dialog programming. Main spindle: A2-6" connection (DIN 55026) * Drive power: 29 kW * Speed range: 0-5000 rpm Counter spindle: A2-6" connection (DIN 55026) * Drive power: 22 kW * Speed range: 0-7000 rpm Tool system: * 12-position tool turret VDI 30 radial, with direction logic for up to 12 powered tools * Power: max. 6.7 kW * Torque: max. 25 Nm * Speed range: 0-5000 rpm * C-axis on the main and counter spindle Y-axis: * Travel range: +/- 40 mm * Rapid traverse speed: 12 m/min Includes: Hodpfx Aioz Sq Sdopofn * Coolant unit for spindle head * Hollow chuck incl. draw rod * Sinumerika 840D/PCU20 control * SHOPTURN dialog programming * RS 232 interface * Machine light * Coolant system incl. coolant pump 3.5 bar * Chuck flushing (additional pump (3.5 bar)) * Part ejector and flushing through the counter spindle * Control cabinet air conditioning * Hydraulic unit * Interface for chip conveyor * Documentation * CE certificate Machine no. S6AY1202 Year of manufacture: 2010

Condition: good (used), Year of construction: 2013, 230mm Swing, 230mm Max Turned Diameter, 230mm maximum turning length, 12 + 12 Station Turrets, 65mm Bar Capacity, 5000rpm 15KW Main Spindle, Hfedpfoz Sqcvsx Aipsn Fanuc 31i Control, C Axis to both Spindles, 5000rpm Sub Spindle, +/-50mm Y axis, coolant, swarf conveyor, tool setter, parts catcher, Magazine Bar-feed.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 39,768 h, travel distance X-axis: 235 mm, travel distance Z-axis: 520 mm, number of axes: 3, This 3-axis MORI SEIKI SL-250ASMC was manufactured in 1989. It features a Z-axis travel of 520 mm and a B-axis travel of 515 mm, providing versatile turning and milling capabilities. The machine is equipped with a chip conveyor and a bar feeder for enhanced productivity. If you are looking to get high-quality turning and milling capabilities, consider the MORI SEIKI SL-250ASMC turn-mill centre we have for sale. Contact us for further details. - Control Unit: Mori Seiki MSD-501II- Phase: 3- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 142 A- Current Rating of the Spindle Motor: 78 A- Interrupting Capacity: 5 kA- Electrical Diagram No.: AEF0253- Rated Power: 49 kVA- Operating Hours: 39,768 h- Number of Axes: 3 Main Axes (X, Z, C) + Sub-spindle/Tailstock (B)- X-Axis Travel: 235 mm- Z-Axis Travel: 520 mm- C-Axis Indexing: 360° (0.001° positioning)- B-Axis Travel: 515 mm- Additional Equipment: Chip conveyor, Bar feeder (Kurt Breuning IRCO Maschinenbau GmbH PROFIMAT Type 52.8 196, 2 kW, 200 V, 50 Hz, YOM 1998, Machine No. Hjdez Sp Nzepfx Aipefn Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 1999, functionality: fully functional, Siemens 840D control system, two turrets, powered tools on both turrets, tool holder VDI25, chip conveyor, FMB magazine, year of manufacture 2017, extensive accessories such as fixed tool holders, powered tool holders, collet chuck, three-jaw chuck, Hfsdpsz Sp Iqofx Aipjn documentation. The machine was operated with oil - no emulsion used. Available immediately.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Hodpfoz Sml Iex Aipsfn Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Year of construction: 1989, condition: excellent (used), For sale: CNC lathe Mazak QuickTurn 20N. The lathe is in very good condition. Equipment includes: MAZATROL T-2, MAZATROL CAM-T-2 control system. Hjdpfjz Scfkox Aipofn

Condition: used, Year of construction: 1999, functionality: fully functional, turning length: 200 mm, turning diameter: 150 mm, spindle motor power: 7,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 48 mm, rotational speed (max.): 5,000 rpm, bar passage: 45 mm, spindle nose: ASA 5, Equipment: documentation/manual, CNC MSC 501 Turning diameter: 150 mm Maximum turning diameter: 420 mm Maximum turning length: 200 mm Spindle/tailstock bore diameter: 48 mm Spindle/tailstock bar passage: 45 mm Spindle/tailstock nose mounting: ASA 5 Spindle/tailstock speed: 5000 rpm Spindle motor power: 7.5 kW Tailstock motor power: 7.5 kW Machine complete with: -Presetting on spindle and tailstock -No. 2 motorized turrets, 12 positions Hfsdpfx Asz R Ug Deipon -Operating manuals and CE declaration Year of manufacture: 1999

Condition: good (used), Year of construction: 2007, Machine is fully functional. Hfsdpfsz R T E Sjx Aipon

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. Hjdpez R T Exefx Aipsfn The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 5,000 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 130 mm, controller manufacturer: FANUC, controller model: 31i, number of axes: 7, This 7-axis DMG GILDEMEISTER MSL60/7 was manufactured in 2012. It features a spindle speed of 5,000 rpm and a spindle bore of 60 mm. The machine includes a counter spindle and driven tools, enhancing its versatility for complex machining tasks. If you are looking to get high-quality turning and milling capabilities, consider the DMG GILDEMEISTER MSL60/7 turn-mill centre we have for sale. Contact us for further details. • Spindle bore: 60 mm • Working hours: 28,000 h Additional equipment • Bar feeder: IEMCA • Chip conveyor: Yes Hsdez R S Dyspfx Aipofn Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: like new (used), Year of construction: 2022, Manufacturer: SPINNER Model: TC600 65MC Year of manufacture: 2022 Control system: FANUC Series 32i-MODEL B Programming: FANUC Manual Guide i Tool interface: VDI30 Approx. 500 operating hours Machining area Max. swing diameter: 600 mm Max. turning diameter: 400 mm Max. turning length: 650 mm Bar capacity: 65 mm Travel distances X-axis: 275 mm Z-axis: 700 mm Rapid traverse X: 15 m/min Rapid traverse Z: 24 m/min Hfjdpfoz R Na Ssx Aipjn Main spindle Max. speed: 4,000 rpm (optional 5,000 rpm) Spindle power: 21 / 27 kW Torque: 201 / 258 Nm Spindle nose: A8 / DIN Standard chuck size: 250 mm Tool turret 16 tool stations VDI30 tool interface Driven tools Max. speed for driven tools: 6,000 rpm C-axis available Tailstock NC tailstock MK4 mount Tailstock stroke: 570 mm Traveling center Included in the delivery: - Extensive selection of collets in various sizes - Numerous VDI30 tool holders - Static and driven tool holders - Collet chuck system - Additional SMW-AUTOBLOK 210 BB chuck - Various clamping jaws and clamping devices - Traveling center MK4 - Additional tools and accessories as shown in the pictures

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, * Mori Seiki ZT 1500 YB. * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. * 9-axis controlled turning and milling center. Hfodpfxoz R I Rco Aipsn * 2 turrets. * Y-axis upper turret. * 2 C-axes. * Bar capacity: 65 mm. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Oil cooler for both spindles. * 340 Nm cutting torque. * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar loader. * Interface for bar loader installation. * Rear automatic part pick-up with a special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. Gkjbtx Tqdszn H Tkezsc * Rear chip conveyor. * Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. * Machine in very good condition. * Machine weight: 6.5 tons. * Machine available for inspection while in operation. * Immediate delivery, unless sold prior to listing.

Condition: used, Year of construction: 2007, turning diameter 470 mm turning length 2500 mm control Siemens Sinumerik 840 D work height max. 1300 mm swing diameter over bed slide 750 mm swing over bed 780 mm diameter of quill 160 mm taper bore MK 5 tool numbers 48 weight of tools max. 15 kg tool length - max. 500 mm total power requirement 123 kVA weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 3,3 m C-axis: - Speed range - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis mm/min - Z-axis - mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle drive with 2-stage gearbox: Hfodpfxoz R D Hlo Aipen - Drive power at 100/60% duty cycle: 37/45 kW - Total speed range: 10–2,500 rpm - Number of speed ranges: 2 - Speed range I: 10–775 rpm - Speed range II: 20–2,500 rpm - Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm) Equipment/accessories: - Forkardt power chuck with one set of hard and soft jaws each - Hydraulic steady rest - Tailstock with center point - Chip conveyor - Coolant device - 5 HSK 100 A holders - Technical documentation

Condition: excellent (used), Year of construction: 2010, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees, 12 station turret , 22KW Motor, Main spindle 4,000 rpm, sub-spindle 4,500 rpm, Hfjdpfx Aisz Rzzaepjn 3 jaw chuck, parts catcher, toolsetter,

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and counter spindle (water- cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle • Fanuc 31i-B control - EMCONNECT/APP based user interface - Manual Guide i dialog programming - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height of 1100 mm, programmable (Type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar • Air gun with spiral hose • LED machine room light • Hydraulic unit Hjdpfx Asz Rzh Hjipofn • Vibration-damping leveling feet • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 1,011 mm, turning diameter: 658 mm, spindle bore: 102 mm, travel distance X-axis: 615 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,077 mm, rotational speed (max.): 3,300 rpm, rotational speed (min.): 50 rpm, bar passage: 102 mm, total height: 2,720 mm, total length: 6,585 mm, total width: 2,800 mm, overall weight: 13,400 kg, We are pleased to offer this Mazak Integrex i-400 x 1000 multitasking CNC machine, manufactured in 2011 and equipped with Mazatrol Matrix control. A versatile machine combining turning and milling operations in a single setup, ideal for precision machining and complex (bigger) components. Technical specifications: Turning diameter: 658 mm Max. turning length: 1011 mm Bar capacity: 102 mm Travel on X-axis: 615 mm Travel on Y-axis: 250 mm Travel on Z-axis: 1.077 mm B-axis travel: -120/+120° Main and spindle: 50 - 3300 1/min. B-axis index increments: 0,0001° C-axis indexing of spindle: 0.0001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 36 tool positions NC Tailstock: MK5 Hedpfx Aiez Rt Dtepjfn We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: excellent (used), Year of construction: 2025, 2025 Takisawa EX-2000YS Turn Mill Model EX-2000YS Twin Spindle CNC Lathe With Fanuc Series OI-TF Plus Control With Dual Toptek BL-3000 Bar Feeders 2 Power Collet Chucks. Maximum Swing Ø800mm. Standard Turning Ø250mm. Maximum Turning Ø390mm. Maximum Turning Length 510.5mm. Distance Between Centres 787mm. Maximum Bar Capacity Ø65/52mm. Axis Travel 'X'=250mm, 'Y'=±50mm, 'Z'=590mm, 'B'=570mm. Rapid Traverse 'X'=30m/min, 'Y'=10m/min, 'Z'=36m/min, 'B'=36m/min. Maximum Main Spindle Speed 4,500rpm (15/11kW Motor), Maximum Sub Spindle Speed 5,000rpm (15/11kW Motor), Maximum Rotary Tool Spindle Speed 4,000rpm (15/11kW Motor). 12 Position Turret. Turning Tool Shank 25 x 25mm. Boring Bar Sleeve Ø40mm. Run Hours 1,085. Bar Feeder Lengths 4.35m. S/No. CZ02EX2153 (2025). Hodez Rqm Sspfx Aipjfn With Coolant System, Chip Conveyor, Foot Switches, Signal Tower & Oil Skimmer. Overall Dimensions L2,600 x W1,932 x H1,800mm. Weight 5,900kg. Please note this asset is located at No. 718, Sec. 2, Yanghu Rd., Sanhu Vil., Yangmei Dist., Taoyuan City 326, Taiwan. Deadline for collection is December 11th 2026.

Condition: used, Year of construction: 2008, 2008 MAZAK QTN-450M-II Nexus CNC Turning Centre with MAZATROL Matix Nexus CNC Control Maximum Swing Ø845mm. Maximum Machining Diameter Ø584mm. Distance Between Centres 1,000mm. Axis Travel 'X'=340mm, 'Z'=1,070mm. Maximum Spindle Speed 2,000rpm (37kW Motor). Maximum Rotary Milling Speed 4,000rpm. 12 Position Turret. S/No.201914 (2008) Any Bidder MUST and CAN ONLY USE the Baker Hughes Approved Contractors to Work Onsite. Please see the Essential information tab for more details. With Coolant System, Chip Conveyor, Traveling Steady & Oil Mist Extraction Unit. Weight 13,000kg. Hodpfjz Rqlbjx Aipofn

Condition: used, Year of construction: 2006, CNC lathe, 2-axis Doosan S280N, year 2006 Fanuc Oi Mate TB control Chuck diameter: 210mm (8 inches) Spindle bore: 51mm Turning length: 320mm Max. turning diameter: 280mm 10-tool turret Tailstock Parts catcher Chip conveyor with tank and pump Hfodpoz Rpg Djfx Aipon Machine documentation

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: Mori Seiki NZX 2000 / 800 SY2 Control: Fanuc 31i A Year: 2012 SPECIFICATIONS Turningdiameter: 200 mm Max. swing over bed: 800 mm Max. turning length: 810 mm Spindle bore: 73 mm Bar capacity: 65 mm Main Spindle Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Hfjdpfxoz Rl Dxj Aipsn Subspindle Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Amount of turrets: 2 Tool capacity: 16 + 16 Driven Tools: 16 + 16 Tool: BMT32 revolution driven tools: 12.000 Y-Axis: 110 mm Req. space (LxBxH): 5.120 x 2.721 m Machine weight: 8.500 kg Equipment Chip conveyor Partscatcher Internal cooling: 70 bar cooling system: Knoll Short Bar Loader: Irco Breuning – ILS MUK 7016 mit Spindelverlängerung Toolholders

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm Control system: Siemens Travel range X-axis: 300 mm Hfsdpfx Aoz Ri U Ioipon Travel range Z-axis: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Includes driven tools Number of positions in the tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Hjdpfsz N H Enox Aipjfn Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle Hedpsz N E Arofx Aipofn with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02260002571, The Gildemeister CTX 420 Linear is a powerful and highly precise CNC universal lathe (or turning-milling center) designed for demanding series and mass production. It is primarily characterized by its linear motor technology in the X-axis, which, compared to conventional ball screws, ensures extremely high dynamics, rapid positioning, and wear-free operation. Equipment: -Single spindle, three-jaw chuck, 11-position tool turret, automatic tailstock, chip conveyor Hfsdpfsz N Etksx Aipjn Control system: -Heidenhain Accessories: -Workbench, under-mounted telescopic drawer unit (7 drawers) Contents: Hand tools, analog and digital measuring instruments, indexable cutting inserts.