Kibo

Condition: used, Year of construction: 2013, operating hours: 28,500 h, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, For sale is a machinery package consisting of 10 robot arms from the manufacturer ABB, along with the necessary accessories! The package is composed as follows: 8x Welding robots for external connection 2x Handling robots 10x Control cabinet 10x Main power cable for robot cabinet 10x Communication cable for robot cabinet 10x Panel with connection cable to the cabinet 1x 40" HC sea container TECHNICAL DETAILS Reach: 2.55 m Handling capacity: 235 kg Center of gravity of the payload: 300 mm Ksdpoz D H Hysfx Amvjnb Wrist torque: 1,324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm MACHINE DETAILS Control cabinet type: IRC5 M2004 Operating panel: FlexPendant Operating panel model: DSQC 679 Input voltage: 3 × 400 V AC Frequency: 50–60 Hz Current consumption: 20 A Operating hours: between 28,500 and 39,000 hours EQUIPMENT Cable set for main connection cabinet–robot Leoni mounting Cable set for handling or welding Note regarding dismantling and loading: As can be seen in the pictures, the manipulators are located in the 40" HC container. The robots are screwed onto the pallets (with 2 screws each), and the control cabinet is secured to the pallet with lashing straps. Further securing/lashing must be carried out by the buyer.

Condition: excellent (used), mileage: 304,837 km, power: 335 kW (455.47 HP), first registration: 07/2023, fuel type: diesel, tire size: 315/70 R22,5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2023, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, navigation system, parking heater, power assisted steering, power mirror, soot filter, traction control, = Additional options and accessories = - 2-pedal control - Adaptive cruise control - Aluminum fuel tank - Heated mirrors - Leaf spring suspension - Brake booster - DAB radio - High beam headlights - Low noise - Speed limiter - Cab - Air conditioning - Alloy wheels - Air suspension - Air-suspended seats - Particle filter - Radio/CD player - Rain sensor - Sleeper cab - Hose groups - Sun visor - Voice control - Lane keeping assist - Stability control - Auxiliary heater - Immobilizer - Tool box - Xenon headlights - Power take-off (PTO) = Notes = Very nice Mercedes-Benz Actros 1846L 4x2 from 2023 with only 304,837 km, leaf spring suspension at the front, air suspension at the rear, radio/navigation, auxiliary drive, Mercedes-Benz engine brake, automatic climate control, sleeper cab with 2 beds, refrigerator, night air conditioning, ALCO rims, tires 315/70-R22.5 (tread depth left: 13.11/8 mm, tread depth right: 13.8/9 mm), Hungarian registration. = Further information = Technical information Knsdpsz D H Hgsfx Amvjb Number of cylinders: 6 Engine displacement: 10,677 cc Axle configuration Tire size: 315/70 R22.5 Brakes: Disc brakes Front axle: Alloy rims; Max. axle load: 7500 kg; Tire tread left: 80%; Tire tread right: 80%; Suspension: Leaf spring suspension Rear axle: Dual tires; Alloy rims; Max. axle load: 11500 kg; Tire tread left inner: 50%; Tire tread left outer: 70%; Tire tread right inner: 55%; Tire tread right outer: 50%; Suspension: Air suspension Weights Unladen weight: 7,222 kg Payload: 10,776 kg GVW: 18,000 kg Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for more information.

Condition: new, Year of construction: 2023, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, motor manufacturer: Jenbacher, NEW power plant equipped with a reconditioned generating set; two units available immediately. NEW container, NEW fittings, Dia.Ne XT4, and a fully overhauled generating set; overhaul report available. ECOMAX 15 G2P NGS with containerized Jenbacher JGS 420 GS-N.L 400V. Accessories and piping are partially visible and partially packed, as these are NEW systems. Drawings and engine data sheets are available. Kedpfxjz D H Hae Amvonb Option to switch to the EGHE 200°C + by-pass configuration. Further customization options are available and can be discussed.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 25,794 h, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 6,500 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 12,000 W, number of axes: 3, This 3-axis MIKRON VCP 800 was manufactured in 2003. It features an X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 450 mm. The machine is equipped with a Heidenhain iTNC 530 control and a high-speed spindle capable of reaching up to 20,000 rpm. If you are looking to get high-quality machining capabilities, consider the MIKRON VCP 800 vertical machining centre we have for sale. Contact us for further details. • Spindle: • Type: Step Tec HVCS 212-S-12-1.7/20-2F-HSK-A63 • Tool holder: HSK-A63 (DIN 69893) • Torque: 63 Nm • Cooling: Water-cooled • Protection rating: IP55 • Insulation class: F • Table: • Dimensions: 1,050 × 590 mm • Maximum table load: to be confirmed • Feed/rapids: • Maximum feed rate: 15 m/min • Rapid traverse rate: 22 m/min Kjdpfx Amjz D H E Aevsnb • Tool magazine: • Capacity: to be confirmed • Max tool diameter (adjacent pockets occupied): 90 mm • Max tool length: to be confirmed • Max tool weight: to be confirmed • Electrical: • Supply: 3 × 400 V + PE, 50 Hz • Control voltage: 24 V DC • Fuse protection: 35 A • Total connected load: 16 kW • Power factor: cos φ 0.9 • Sound pressure level: 75 dB(A)

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2007, loading space length: 13,410 mm, loading space width: 2,520 mm, loading space height: 2,650 mm, total length: 14,000 mm, total width: 2,600 mm, wheelbase: 8,910 mm, color: other, Year of construction: 2007, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - Cooling Engine - Disc brakes - SAF Assen - Tailgate = More information = Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Kodpfoz D H Evex Amvonb Empty weight: 8.600 kg Carrying capacity: 33.400 kg GVW: 42.000 kg Tail lift: D`Hollandia, tail lift APK (MOT): tested until 07/2027 Registration number: OJ-90-ZX

Condition: used, Year of construction: 1995, functionality: fully functional, Comec FT-CD-CA-650 end-milling machine Number of milling heads per side: 1 Length of workpieces: approximately max/min 650-220mm Knsdpsz D H Ecjfx Amvob Automatic material feeding from a feeder Operation based on templates

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: DAM413, Equipment: CE marking, Cryogenic tunnel freezer 4m Effective freezing length 0.3m Effective machine width Total machine length 5m Total machine width *Cooling medium: Liquid nitrogen 2.5-3 Bar *Robust and high-quality design. Construction with 120mm wall thickness. Manufactured from AISI 304 and 316 stainless steel. With fully welded tunnel sections. U-shaped bottom for optimum cleaning. Opening and closing of the freezing tunnel is achieved by pneumatic bellows, providing full access for cleaning and maintenance purposes. Kedpfjz D H D Sjx Amvsnb *Insulation: Hard foam with an average density of ± 40 - 50 kg/m³. Cryo seal. *5 axially mounted motor units, IP55 rating, fitted with stainless steel extension and propellers. *Product & loading: Product infeed height 120mm. *Proportional controlled LN² injection. *Electrical stainless steel cabinet, IP67 rating. Control panel, IP55 rating. *Power supply: 3x400+N Pe 50Hz 16A. *CE declaration, food certified, user manual, after-sales service. *1 year warranty.

Year of construction: 2020, condition: used, This listing is for Puro-i III | RO Water Purification System The unit is in full working condition and ready for immediate use The Avidity Science Puro-i III is an integrated reverse osmosis water purification system designed to produce Type III laboratory water directly from potable tap water. Depending on configuration, the system provides production rates from 5 to 30 L/hr, with dispensing at up to 2 L/min. Features include twin-pass RO technology, automatic RO sanitisation and an interactive touchscreen interface. Typical specifications include Type III water production, up to 99% inorganic rejection and feed-water pressure of approximately 0.5–6 bar. Available configurations include different production rates, reservoir conductivity monitoring and loop options Transparency Report and Technical Audit: Software and Media Disclosure: Knjdpfx Amez D H D Esvjb As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Year of construction: 2013, operating hours: 28,500 h, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, LOT scope: 3x welding robots for external connection 2x handling robots 5x control cabinets 5x main power cable for robot cabinet 5x communication cable for robot cabinet 5x panel with supply line to the cabinet Operating hours: between 28,500 and 39,000 hours Manufacturer: ABB Model: IRB 6640-235/2.55 Type: IRB 6640 M2004 Reach: 2.55 m Handling capacity: 235 kg Center of gravity of payload: 300 mm Wrist torque: 1324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm 3x 400V AC 50-60 Hz 20 A Accessories: Knjdpfx Ajz D H Drjmvob Control cabinet: Type: IRC5 M2004 Operating panel: FlexPendant Model: DSQC 679 Cable set: Main connection cabinet to robot Leoni add-on: Cable set for handling or welding

Condition: new, Year of construction: 2023, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: Jenbacher, NEW power plant equipped with a reconditioned generating set; two units are immediately available. NEW container, NEW fittings, Dia.Ne XT4, and a fully overhauled generating set; overhaul report available. ECOMAX 10 G2P NGS with a containerized Jenbacher JGS 320 GS-N.L 400V. Drawings and engine data sheets are available. Option to switch to the EGHE 200°C + by-pass configuration. Knedpfoz D H Dlox Amvjb Further customization options can be discussed.

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 220 V, oil tank capacity: 5 l, machine/vehicle number: GDI-6000, Equipment: CE marking, It features a specially designed ergonomic structure. (The cabinet section also serves as a cargo carrying box.) Aluminum body, test rail, and bottle holder; flexible, custom test tubes resistant to hot and cold weather conditions, 6X150 (mg). From 1 injector to 6 injectors, with easy-to-connect fittings, injectors can be connected in a short time. Thanks to the injector drip reservoir, you can perform detailed spray pattern detection. Each test lasts a maximum of 90 seconds. With a 200 bar system (Electronic Measurement) specially designed for the GDI-6000, pressures are measured clearly. The GDI-6000 reaches a maximum of 200 bar. Thanks to this pressure, drip tests can be observed very clearly. With the ability to print receipts, you can provide test results to service centers and organizations that require them. Thanks to the DATABASE, the (mg) values that more than 6000 different types of injectors should deliver can be seen on the 7.0-inch touch screen. Thanks to the NEW-ENJ+ MODE, you can create and save injectors and injection parameters that are not found in the DATABASE. Thanks to the OHM-TEST MODE, you can measure the injector (OHM test) values. AUTO-1: Low speed (4000 RPM) Kedpfxoz D H Dfj Amvonb AUTO-2: Medium speed (5000 RPM) AUTO-3: High speed (7000 RPM) DRIP TEST: Thanks to the Leaking Out mode, you can perform injector drip (leakage) tests clearly under pressure. Thanks to the MANUAL MODE, you can perform the desired RPM, PULSE, and TIMER tests with the RPM+ PULSE+ and TIMER+ settings.

Condition: like new (used), functionality: fully functional, mileage: 137,000 km, power: 251 kW (341.26 HP), first registration: 10/2020, fuel type: diesel, empty load weight: 11,245 kg, maximum load weight: 14,775 kg, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, brakes: VEB, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, number of seats: 2, total length: 11,500 mm, total width: 2,550 mm, total height: 3,550 mm, loading space length: 9,050 mm, loading space width: 2,450 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), full service history, lane keeping assist, navigation system, power assisted steering, truck registration, ADDRESS: Außenplatz 13089 Berlin Complete service history, Volvo maintenance contract New inspection/MOT Payload: 14,880 kg, 23 loading spaces 2.0 t tail lift with a 2 m shield Knedsz D H A Uopfx Amveb VEB (Volvo Engine Brake) staged braking assistant Automatic transmission Air conditioning Rear view camera Distance control cruise control 6x2, 3rd axle liftable and steerable Electric windows Central locking Electrically adjustable exterior mirrors Sun visor Trade-in possible Delivery possible WhatsApp +49 177 2773745

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 34608, total width: 3,700 mm, total length: 7,200 mm, overall weight: 3,500 kg, input voltage: 400 V, input frequency: 50 Hz, Air cushion table with breaker bars – tiltable with support Kjdpfx Ajz D H A Iemvonb Breaker bars: 3x X 2x Y

Condition: used, total width: 1,100 mm, total height: 1,500 mm, total length: 1,800 mm, Motor power: 4.0 kW Hopper (diameter): 1000 mm, with agitator Throughput: 25 - 25 kg/h, depending on the material Knedsz D H Azepfx Amvjb

Year of construction: 2020, condition: used, Product: Sylysia 350, Gasil 23 D, Precarb 800, Calcilit, Benzophenone (partially lumpy), Lo-Vel 8100, Syloid 7000, bulk density: 0.08-0.73kg/l, particle size: powder, product temperature: 5-30°C, moisture: dry, consistency: free-flowing, non-sticky and non-agglomerated, system capacity: according to customer-provided container handling, operating mode: 3-shift operation, installation location: indoors/heated, ambient temperature: 5-30°C, power supply: 400V, 3Ph,N, 50Hz, control voltage: 24VDC, compressed air supply: 4-6bar, oil-free, max. surface temperature: 200°C, with documentation. An on-site inspection is possible, not connected to power. Kodpfsz D Hzqjx Amvonb

Year of construction: 1998, condition: used, Rated current: 7.6A, frequency: 50Hz, control voltage: 110V, machine lamp: 24V, degree of protection: IP54, connected load: 5kVA, weight: 1.65t, with CE marking, an on-site inspection is possible. Knsdpfjz D Hzksx Amveb

Condition: used, Ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible. Knedpfx Asz D Hzdsmvsb

Condition: good (used), Year of construction: 2022, Loma CW3 Checkweigher Serial: EQCW-143-DEV-026380 Knedpfxjz D Hy Ts Amvsb 2022, Stainless checkweigher, belt dimensions 2050mm x 180mm, weigh bed 180mm x 200mm, weight range 100g - 1500g, with pneumatic push arm reject into locked reject bin, HMI Touch screen controls, 1Ph

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 1,500 mm, total width: 900 mm, total length: 1,400 mm, overall weight: 850 kg, IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 1400*900*1500 mm over width, depth and height. Instructions and packing come with the machine. Knsdpfjz D Hyyex Amvsb With special Bandsaw pneumatic band insertion device for 10-25 mm width. Voltage 400-440 V Power 25 kVA Frequency 50-60 Hz Serial no. 239635 Year of manufacture 2012 Bandsaw blades welding widths From 6 to 50 mm possible, current setup is for blades from 10 to 25 mm wide.

Condition: new, mileage: 1,225 km, power: 260 kW (353.50 HP), fuel type: electric, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 2, suspension: air, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, power mirror, traction control, = Additional Options and Accessories = - Roof hatch - Differential lock - Remote central locking - Cruise control - Adjustable steering wheel - LED daytime running lights - Leather steering wheel - Air suspension - Disc brakes - Headlight cleaning system - Sun visor - Immobilizer - Power take-off (PTO) - Power take-off (PTO) - Partition with window = Further Information = Axle configuration Suspension: Air suspension Front axle: Alloy wheels; Steerable Rear axle 1: Twin tires; Differential lock; Alloy wheels Rear axle 2: Alloy wheels; Lift axle; Steerable Weights Unladen weight: 12,650 kg Payload: 14,350 kg Kjdpfx Amez D Hyasvjnb GVW: 27,000 kg Functional Body manufacturer: HIAB ULTIMA 18S 59 FLEX Dumper: Rear Condition Overall condition: very good Technical condition: very good Optical condition: very good

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: Kodpfx Asz D Hx Nomvjnb >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back wall >> Coolant system >> Machine feet At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. About the machine: A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up.

Condition: used, Year of construction: 2015, operating hours: 392 h, load capacity: 230 kg, Empty weight: 1.565 kg Kjdpfsz D Hx Ajx Amvjnb GVW: 1.795 kg Dimensions (LxBxH): 207 x 81 x 210 cm Working height: 800 cm Availability: in stock

Condition: used, Year of construction: 2015, operating hours: 433 h, load capacity: 230 kg, Empty weight: 1.565 kg Kedsz D Hxvepfx Amvsnb GVW: 1.795 kg Dimensions (LxBxH): 207 x 81 x 210 cm Working height: 800 cm Availability: in stock

Condition: used, Pneumatic pick and place manipulator, loading unit similar to a SCARA robot with a parallel gripper. Knodoz D Hxiopfx Amvjb Handling device, handling system, pick-up gripper, loading gripper for automation. Horizontal axis with guide cylinder, linear module type SM 32/150 (column module GEMOTEC). Vertical axis with guide cylinder, linear module type SM 20/060 (column module GEMOTEC). Parallel gripper type GMP 20. Load capacity: max. 2 kg. Horizontal movement: 150 mm (pneumatic). Vertical movement: 60 mm (pneumatic). Vertical adjustment on the two support columns: 435 mm (manual, with clamping). Support columns, vertical guide column: Ø 45 mm. Guide column, linear module type SM 32/150: Ø 20 mm. Guide column, linear module type SM 20/060: Ø 12 mm. Mounting foot: 180 x 75 mm. - Can be moved pneumatically in two axes. - Part gripper, parallel gripper type GMP 20 (65 x 35 mm). Space requirement L x W x H: 550 x 160 x 550 mm. Weight: 17 kg. Very good condition. Various manipulators available, see our webshop.

Condition: good (used), Robot Coupe R30 Vertical Cutter Mixer Knedpfxoz D Hw Se Amvjb Stainless, 30L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph