Dauth Kom.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 680 mm, controller manufacturer: FANUC, controller model: Series 16i-M, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 120, number of axes: 5, This 5-axis Matsuura MAM72-3VS was manufactured in 2001. It features a spindle speed range of 50–15,000 rpm, a 120-station tool changer, and capacity for 40 pallets. The machine is equipped with FANUC Series 16i-M control, through-spindle coolant, a chip conveyor, and a Renishaw probe for workpiece measurement and tool monitoring. Consider the opportunity to buy this Matsuura MAM72-3VS vertical machining centre. Contact us for further details. MATSUURA MAM72-3VM (2000) available as well (Did not run since 8 years) Gksdps Akcvzofx Agled MATSUURA MAM72-3VM (2000) available as wellDid not run since 8 yearsMATSUURA MAM72-3VS (2001)- Control System: FANUC Series 16i-M / 16iMA 5-Axis CNC Control- Main Spindle Speed: 50 - 15,000 rpm (upgraded from standard 30 - 12,000 rpm; BT 40 JIS B 6339 Big+ taper, grease lubricated)- Tool Changer Capacity: 120 stations (prepared for expansion to 240)- Pallet Changer Capacity: 40 pallets- Power Supply: AC 380 V ±10%, 50 Hz ±1 Hz, 3 Phase- Power Rating / Current: 48 kVA, 73 A- Measuring System: Direct scale feedback system (Heidenhain) for X, Y, Z, B, and C axes- Memory Capacity: Extended memory to 2 MB- Workpiece Coordinate Systems: 54- Program Storage: Up to 400 storeable programs- Coolant System: Coolant supply through spindle (20 bar) and coolant spray gun in working area- Chip Conveyor: Hinge-belt chip conveyor with drum filter- Measurement & Probe: Renishaw probe for automatic zero-point setting, workpiece measurement, tool breakage monitoring, and automatic tool length compensation (including macro programming and high-speed skip function)- Additional Functions & Paint: Program restart, tool life management, CE marking, two-tone paint (silver, light blue, dark blue)

Condition: repair required (used), Year of construction: 2002, Control system: Siemens 810D Technical data: • X / Y / Z: 610 mm × 305 mm × 520 mm • Table size: 762 mm × 363 mm Gjdpfx Agj Ai Ui Solekd • Table load: 250 kg • Spindle speed: 8,000 rpm • Tool holder: SK40 (ISO 40 / BT40, depending on the country version) • Tool magazine: 16 positions • Equipment: Chip tray with coolant pump, transformer, handwheel, 4th axis (Golden Sun, CNC 151RB, 2002) and documentation Machine condition: Defective – control system does not boot up, limited documentation. The accessories shown in the pictures may not be included in the scope of delivery. Only accessories confirmed in writing by us will be included.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 635 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 14,000 rpm, number of axes: 3, This 3-axis DMG DMC 635 V was manufactured in 2007. It features a spindle speed of up to 14,000 RPM and a tool magazine capacity of 30 stations. The machine is equipped with a through-spindle coolant system and a Heidenhain TS 649 touch probe for enhanced precision. If you are looking to get high-quality machining capabilities, consider the DMG DMC 635 V vertical machining centre we have for sale. Contact us for further details. - Spindle: 14,000 rpm, HSK-A63- Tool Magazine: 30 positions- Cooling: Internal Coolant Supply (IKZ) 20 bar / 600 l- Measuring Technology: Direct measuring systems X/Y/Z with sealing air, Touch probe TS 649- Equipment / Accessories: Cabin roof, rotating viewing window, oil mist separator, electronic handwheel, signal lamp Gedpfx Aj Ai Tl Doglokd

Condition: good (used), Year of construction: 2014, Traverses X Y Z 533 x 406 x 483mm, Gkodpfx Ao Ai Sk Soglod A axis 30/110 degrees, C axis 360 degrees, table size 198mm diameter, table load 150kgs, spindle speed 10,000 rpm, spindle taper BT40, 20 station ATC, Winmax control.

Condition: ready for operation (used), operating hours: 16,413 h, functionality: fully functional, machine/vehicle number: 28850008622, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 426, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! Gsdpfxe Ai Sb Hs Agljkd Submitting a bid obligates you to collect the item on time on November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Feed rate: 0–30,000 mm/min Rapid traverse X/Y/Z-axis: 30 m/min Positioning accuracy X-axis: 0.0015 mm Positioning accuracy Y-axis: 0.0010 mm Spindle speed range: 1–8,000 RPM Tool holder: SK 40 Number of tool positions: 24 Tool diameter: max. 80 mm Tool diameter with free adjacent positions: max. 140 mm Tool length: max. 300 mm Tool weight: max. 7 kg Table dimensions: 800 x 500 mm Table load: max. 500 kg MACHINE DETAILS Control system: Heidenhain TNC 426 Read operating hours: 16,413 h Operating voltage: 400 V Frequency: 50 Hz Rated current: 50 A Connected power: 30 kVA Dimensions and weight Machine dimensions: 2,500 x 2,400 x 2,400 mm Machine weight: 4,000 kg EQUIPMENT Tool holders in the tool changer External reference: Präzitec - Lot 1

Condition: excellent (used), Year of construction: 2020, Brother C-00 control system Gkodpfxs Ai H Nue Agljd Travel ranges X/Y/Z: 650 x 400 x 435 mm Dual pallet changer, 800 x 400 mm Spindle speed: 16,000 rpm Tool magazine for 40 tools, BT 30 Coolant pressure: 70 bar 3D measuring probe, OMP 40 Electronic handwheel Chip conveyor

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, 5-axis RXP601DSH with RCS3 automation Travel ranges: X-axis 540 mm Y-axis 635 mm Z-axis 400 mm A-axis (swiveling) ±115° C-axis (rotating) virtually unlimited Gkods Ai Hywepfx Agljd - Spindle HSK50E 36,000 RPM - Thermal package - Blum measuring laser for tool measurement - Emulsion cooling with strip filter system and IKZ40 bar - Tool changer, 76-position - Job management - Automation for Erowa UPC pallets, ITS148 pallets, and HSK tool holders - Erowa UPC with pre-pallet on the machine table - Automatic 3D probe The machine is completely measured and overhauled in our facility. The manufacturer's tolerances for new machines are met.

Condition: good (used), Year of construction: 2006, operating hours: 21,565 h, functionality: fully functional, machine/vehicle number: 107.37.00.165, total height: 2,700 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 7,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10,697 h, spindle motor power: 10 W, number of spindles: 1, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Offered here is a CNC vertical 5-axis machining center from the manufacturer Mikron, featuring a workpiece pallet pool with 7 pallets. The machine is in very good condition and can be inspected and tested at any time. Manufacturer: Mikron GF Type: UCP 600 Vario Year of construction: 2006 Control system: Heidenhain iTNC 530 Technical data: Travel ranges X-Y-Z: 600x450x450 mm Max. rapid traverse: 22 m/min Max. feed force X and Y axis: 5 kN Max. feed force Z axis: 7 kN Rotary table C-axis: 360° Swivel range A-axis: -115° to +30° Table surface: 450x450 mm Max. table load: 200 kg Magazine positions: 30, fixed coded positions Tool holder: ISO-B40 Max. tool length: 250 mm without taper Max. tool weight: 6 kg Tool diameter: 90 mm fully loaded / 130 mm partially loaded Spindle speed: 12,000 rpm Power: 15 kW at 44% duty cycle, 10 kW at 100% duty cycle Machine dimensions: 3300x2400x2700 mm (excluding pallet pool) Weight: 7,700 kg Gksdpfj Aivkaox Aglsd Included in the scope of supply: 1x KSS system 1x Chip conveyor with coolant tank 1x Spindle oil cooler 1x Pallet pool with 7 work pallets 1x Renishaw measuring probe OMP60

Condition: good (used), Year of construction: 2016, Traverses X Y Z; 600 x 450 x 450mm, Godpo Air H Sjfx Agljkd B axis -120/+ 45 degrees, C axis 0.001 degrees, pallet size 280mm x 280mm, maximum spindle taper HSK A63, 120 station ATC, spindle speed 20,000rpm, Heidenhain TNC530 control, through spindle coolant,

Condition: used, Year of construction: 2006, travel -x axis 2.000 mm travel -y axis 620 mm Gksds Ah T U Tspfx Aglod travel -z axis 520 mm numbers of positions in the tool changer 56 tool adaptor SK40 5-axis machining center | HEDELIUS - RS60 Magnum KM2000 equipped with shuttle operation, rotating swivel turntable and chip conveyor. Please note that the technical details were added from comparable machines. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RS60 KM2000 | RS-60 | RS 60

Condition: like new (used), Year of construction: 2017, operating hours: 2,450 h, functionality: fully functional, Machine with 4+1 axis operation CNC FANUC Like new condition, with only 5,000 operating hours and 2,450 spindle hours Spindle DIN 12,000 rpm with coolant system Chip conveyor 60-position tool changer High-pressure coolant through the spindle RENISHAW TS-27 tool presetter Roof with motorized top opening for crane loading Gkjdpfxs Ah T Nnj Agled Overhead table, 700mm diameter, with threaded holes for fixture positioning (removable)

Condition: ready for operation (used), Year of construction: 2008, Make: DECKEL MAHO Gkjds Ah Spwepfx Aglsd Type of machine: DMC 635 V Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Tool holder: SK 40 x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm Speed range: 10.000 U/min max. Table load: 600 kg Operating time: 22.646 h Spindle operating time: 8.241 h Table dimensions: 790 × 560 mm Number of tools in the magazine: 24 Plätze Internal coolant supply: 20 bar

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, total height: 3,000 mm, total width: 2,330 mm, table load: 250 kg, overall weight: 9,200 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 20,000 W, tool weight: 8,000 g, product length (max.): 2,880 mm, number of axes: 5, This 5-axis EMCO MAXXMILL 500 was manufactured in 2016. It features a maximum spindle speed of 15,000 rpm and a tool magazine capacity of 40 tools, allowing for efficient machining operations. The machine includes a swivelling-rotary table with a clamping area of 600 x 600 mm and a maximum workpiece size for 5-side machining of 500 x 500 x 475 mm. If you are looking to get high-quality milling capabilities, consider the EMCO MAXXMILL 500 vertical machining centre. Contact us for further details. • B-axis (tilting): ±100° • C-axis rotation: 0–360° continuous • Rapid traverse X/Y/Z: 30 m/min • Max rotational speed B/C axes: 25 rpm / 25 rpm • Spindle nose to table distance: 150–650 mm • Max acceleration X/Y/Z: 3 m/s²Main spindle • Max torque: 100 NmWorking table • Type: Swivelling-rotary table • Clamping area: 600 × 600 mm • Max workpiece size for 5-side machining: 500 × 500 × 475 mm • T-slots: 5 • T-slot spacing: 100 mm • Table-to-floor distance: 776 mmTool changer • Magazine type/capacity: Drum magazine, 40 tools • Tool change system: Double-gripper arm • Tool-to-tool time: 2 s • Max tool diameter: 80 mm (125 mm without adjacent tools) • Max tool length: 250 mm • Max total magazine load: 100 kg • Tool management: RandomAccuracy (manufacturer nominal) • Positioning accuracy X/Y/Z: 8 µm • Repeatability X/Y/Z: 3 µm • B-axis positioning accuracy: ±20 arcsec • C-axis positioning accuracy: ±10 arcsecCoolant system • Tank capacity: 250 L • Standard pump pressure: 2 bar • Max flow at 2 bar: 40 L/minCondition, refurbishment, and status Gkodpfx Ago Ah H Nqsled • Comprehensive refurbishment by specialist: • Complete refurbishment and installation/adjustment of swivelling-rotary table • Extensive cleaning and reconditioning • Installation and setup of workpiece and tool measurement probes • Automatic kinematic calibration (KINEMATIC AUTO) • Brand-new main spindle installed • Machine connected to power and operational • Milling test possible Additional equipment • Automatic workpiece probe • Laser tool measurement system • Through-spindle coolant system, 20 bar • Chip conveyor (chip discharge height: 1,100 mm) • Linear scales on X, Y, Z • Automatic machine door • Automatic kinematic system (KINEMATIC AUTO) • Oil supply for machining fixtures via rotary joint at table centre • Spare spindle available (inclusion in sale to be confirmed) Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2015, travel -x axis 620 mm travel -y axis 520 mm Gedpj Ahzi Eofx Agljkd travel -z axis 420 mm control HEIDENHAIN - TNC 620 number of spindle speeds 12.000 NC rotary indexing table Ø 650 mm table: swivelling -90 / +110 Grad table load 300 kg numbers of positions in the tool changer 32 tool taper SK40 5-axis simultaneous machining center | SPINNER - U5 - 620 equipped with ITC, NC swivel rotary table, tool changer & chip conveyor. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to the offer for further technical details. A machine video will be shared on request. Documentation is available! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: U5 620 | U5-620

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, controller model: Series 0i-MD, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis UNITECH XV 610 was manufactured in 2011. It features a spindle speed of 10,000 rpm and an automatic double-arm tool changer with a capacity of 24 stations. The machine includes a chip conveyor and has a total weight of 3,300 kg. If you are looking to get high-quality machining capabilities, consider the UNITECH XV 610 vertical machining centre we have for sale. Contact us for further details. Gkedpfs Ahq T Iox Aglsd - Spindle Taper: SK40 - Tool Changer Capacity: 24 stations - Tool Changer Type: Automatic double-arm tool changer - Chip Conveyor: Included - Voltage: 230 V - Frequency: 50 Hz - Connected Load: 30 kVA - Total Weight: 3,300 kg - Exclusions: Clamping devices (vises) and tool holders are NOT included in the price

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 305 mm, total height: 2,704 mm, total length: 1,830 mm, total width: 3,029 mm, overall weight: 3,550 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 60 h, coolant supply: 30 bar, spindle motor power: 26,200 W, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Additional features: Lower table BBT30 tool holder CTS 30 BAR 10,000 RPM high-torque spindle 40 tool positions Top cover Manual pulse generator Automatic door Area sensor Hydraulic rotary joint 4P + pneumatic relay box 12P Exio board input 32/output 32 + Profinet slave Spindle overdrive 2 magnetic plates Flaig + integrated control system 400x600 Renishaw T27R (2x) Chip conveyor Cromar Gjdj Ahhlzspfx Aglekd 4th axis Kitigawa MR160L + support Corresponding fixtures + bolts (+/-25 pieces) Topsolid 7 post-processor

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 308, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,600 mm, table length: 650 mm, table load: 1,850 kg, overall weight: 13,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, - Year of manufacture: 1994 - First owner, used in our own operations - Fully functional, under power, ready for demonstration - Control system: Fanuc 0MC - Working area X-axis: 1300 mm - Working area Y-axis: 650 mm - Working area Z-axis: 660 mm - Table working surface: 1600 x 650 mm - Max. permissible workpiece weight: 1850 kg - Number and width of T-slots: 5 x 18 mm - Spindle speed range: 20 - 6000 min-1 - Rapid traverse rate: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min Gksdps Ahhcrefx Agljd - Tool holder: SK50 / MAS BT50 - Tool magazine: 30 positions - Machine weight: 13000 kg - Serial number: 308 Net price, unloaded ex-works at the Luckenwalde location (Germany), excluding transportation. Loading by an external service provider is possible for an additional charge of EUR 1,300.00. Sale only within Germany or the European Union!

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 208, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,100 mm, table length: 450 mm, table load: 700 kg, overall weight: 7,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 25, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, - Year of manufacture: 1994 - First owner, used for own operations - Fully functional, powered, ready for demonstration - Control: Fanuc 0MC - Working area X-axis: 800 mm - Working area Y-axis: 450 mm - Working area Z-axis: 510 mm - Table working surface: 1100 x 450 mm - Max. permissible workpiece weight: 700 kg - Number and width of T-slots: 5 x 18 mm - Spindle speed range: 20 - 6000 min-1 - Rapid traverse speed: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min - Tool holder: SK40 / MAS BT40 - Tool magazine: 25 positions - Machine weight: 7000 kg - Serial number: 208 Net price, unloaded, ex works Luckenwalde (Germany), excluding transport. Godpfxe Ahhbme Aglskd Loading can be arranged through an external service provider for an additional charge of EUR 1,000.00. Sale is only possible within Germany or the European Union!

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,742 mm, total width: 2,265 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, tool weight: 6,000 g, product length (max.): 2,441 mm, number of axes: 3, This 3-axis DMG MORI DMC 635 V ecoline was manufactured in 2014. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMC 635 V ecoline vertical machining centre we have for sale. Contact us for further details. Gjdpfxe Agb Uvj Aglekd - Control: HEIDENHAIN TNC 620 (MC 7420D / TE 7150 keyboard / SLIMline panel)- Number of Axes: 3 (X, Y, Z)- X-Axis Travel: 635 mm- Y-Axis Travel: 510 mm- Z-Axis Travel: 460 mm- Table Clamping Surface: 790 x 560 mm- Max. Table Load (Center): 600 kg- Table T-Slots: 4 / 14H12, distance 100 mm (1 reference slot 14H7)- Table Height from Floor: 720 mm- Spindle Speed Range: 20 - 12,000 rpm (1/min)- Spindle Drive Power (40% ED / 100% ED): 13 kW / 9 kW- Spindle Torque (40% ED / 100% ED): 83 Nm / 57 Nm- Tool Taper / Interface: SK40 (DIN 69871 / ISO 7388/2 Type A or DIN 69872 Form A/B)- Tool Clamping Force: 8 kN- Tool Magazine Capacity: 30 stations- Max. Tool Diameter (Adjacent Empty / Full): 130 mm / 80 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 6 kg (Max. total magazine tool load: 90 kg)- Rapid Traverse (X / Y / Z): 30 m/min- Feed Rate (X / Y / Z): Continuously programmable up to 20,000 mm/min- Positioning Resolution / Uncertainty: 1 µm / 16 µm (VDI/DGQ 3441)- Coolant Tank Capacity: ~120 l- Machine Weight: ~3,900 kg (3,950 kg with 30-tool magazine)- Apparent Power: 17 kVA- Nominal Line Current (In max): 28 A- Main Fuse: 35 A (Short-circuit breaking capacity: 0.35 kA)- Power Supply: 400 V AC (3/N/PE), 50/60 Hz- Control Voltage: 24 V DC / 230 V AC- Pneumatic Supply Pressure: 5.5 - 8.0 bar (Air consumption: 30 m³/h without blow-off; +20 m³/h continuous)- Machine Dimensions (W x D x H): 1,880 mm (2,265 mm with coolant tank) x 2,441 mm x 2,742 mm (Transport height min: 2,330 mm)- Required Floor Space: 4,500 x 4,400 mm Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details. Gksdpfxe Af Nzuo Aglod - Demonstration machine- Spindle Hours: 332 h- Program Run Hours: 310 h- Feed Rate (Rapid Traverse): X/Y/Z up to max. 30/30/15 m/min - Main Drive (Option Installed): SK 40 Motor Spindle, 1 - 12,000 rpm (Swiss made) - Spindle Power: 8.5 kW (S1-100% ED) / 11.5 kW (S6-40% ED) - Spindle Torque: 43 Nm (S1-100% ED at 1,880 rpm) / 58 Nm (S6-40% ED at 1,880 rpm) - Tool Interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872) - Tool Clamping: Mechanical, clamping force 10,000 N, hydraulic release - Vertical Milling Head: Direct-driven, manually tiltable -5/+90°, extendable quill with turnstile (stroke 70 mm, clampable) - Rigid Angle Table Surface: 800 x 425 mm - Table T-Slots: 6 x 14 H7 (pitch 63 mm) - Max. Table Load: 300 kg - Tool Changer: 20-station disc magazine, SK 40 - Max. Tool Diameter: 75 mm (full magazine) / 150 mm (with adjacent empty pots) - Max. Tool Length: 250 mm - Max. Tool Weight: 8 kg - Tool Change Time: approx. 3 s (chip-to-chip approx. 15 s) - Positioning Accuracy (ISO 230-2): 0.008 mm (direct linear measuring systems) - Repeatability (ISO 230-2): 0.006 mm (direct linear measuring systems) - Measuring System: HEIDENHAIN absolute direct linear measuring system (resolution 0.001 mm) - Coolant Through Spindle (IKZ): 50 bar high-pressure pump (26 l/min), 4-stage pressure adjustment (15/25/40/50 bar), 25 µm double switch filter - Internal Air Cooling: Through-spindle air cooling, M-function programmable - External Air Cooling: Flexible articulated hose, M-function programmable - Paper Band Filter Unit: Trommel-mulden filter with 600 l external tank, type VDF150/50/50 (150 g/m²) filter fleece (dimensions: 1800 x 860 x 1620 mm) - Chip Conveyor: Hinge-belt conveyor integrated into 115 l coolant tank, 60° incline, lateral discharge left (height 870 / 1060 / 1200 mm) - Workpiece Probe: HEIDENHAIN TS 460 3D probe (infrared) with SE 661 transceiver - Additional Axes Preparation: 4th axis preparation (axis controller in electrical cabinet, pre-wired interface) - Automation Interface: Preparation kit for EDUCATION4.0 Cobot cell (Harting connector I/O interface, pneumatic connection, plus 2x pneumatic table connections max. 6 bar) - Enclosure Door: Automatic sliding front door driven by belt drive (manual push button & programmable) - Software Option: OCM (Optimized Contour Milling) for advanced trochoidal milling - Handwheel: HEIDENHAIN HR 510 FS electronic handwheel with axis selection and emergency stop - Operating Voltage: 400 V, 50 Hz - Power Consumption: approx. 21 kVA - Control Voltage: 24 V - Compressed Air Supply: 6.5 - 10 bar (min. 6.5 bar required at machine) - Machine Weight: approx. 2,900 kg (with tool changer)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 13,672 h, functionality: fully functional, machine/vehicle number: 1237361A51A, travel distance X-axis: 610 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, controller model: Fanuc 0-MD, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 3 X-axis travel: 610 mm Y-axis travel: 430 mm Z-axis travel: 570 mm Table length: 650 mm Table width: 450 mm Tool holder: BT40 Main spindle power: 15 kW Spindle speed: max. 10,000 rpm Tool magazine capacity: 24 MACHINE DETAILS Control system: Fanuc 0-MD Operating hours: 13,672 h Dimensions & Weight Gedpfe Af Hc Rox Aglekd Dimensions (L x W x H): 5,000 x 2,200 x 2,450 mm Weight: 9,000 kg Number of transport packages: 2 EQUIPMENT Tool magazine Documentation CE marking

Condition: good (used), Year of construction: 2017, operating hours: 46,510 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, overall weight: 6,650 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 7,658 h, number of slots in tool magazine: 20, Equipment: chip conveyor, Control system: Heidenhain TNC 640 Table surface: 1,100 x 570 mm Max. table load: 1,000 kg Gkodpfs Afymvox Aglsd Rapid traverse rate X / Y / Z: 42 m/min Chip conveyor Measuring probe Internal cooling lubricant system (IKZ)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 016-018271-450, travel distance X-axis: 600 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 580 mm, controller model: FANUC 0i-MD, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 530 mm Travel range, Z-axis: 580 mm Table area: 840 × 500 mm Maximum table load: 800 kg Drive power: 15 kW Spindle speed: 8,000 rpm Tool positions: 20 Gedpfx Ao Afxygogljkd Tool holder: BT 40 MACHINE DETAILS Control system: FANUC 0i-MD EQUIPMENT 20-position tool changer 80 tool holders BT 40

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 610 mm, travel distance Y-axis: 5,110 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: Series 18i-MB, table load: 500 kg, overall weight: 6,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 21,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Bridgeport XP3-610 (VMC-610 XP3) was manufactured in 2005. It features an X-axis travel of 610 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 900 × 500 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport XP3-610 vertical machining centre we have for sale. Contact us for further details. • Worktable size: 900 × 500 mm • Max workpiece weight: 500 kg • Rapid traverse (X): 43 m/min • Rapid traverse (Y): 43 m/min • Rapid traverse (Z): 36 m/min • Electrical: 400 V, 3-phase, 50 Hz Gjdpo Afxtgjfx Aglekd • Full load current: 50 A • Short circuit interrupt rating: 415 V / 10 kA • Manufacturer address (nameplate): Hardinge Bridgeport, Whiteacres, Cambridge Rd, Whetstone, Leic, LE8 6BD, England Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 426, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 600 mm Gjdpo Afxpzjfx Aglokd Y-axis travel: 400 mm Z-axis travel: 600 mm Table length: 750 mm Table width: 450 mm Spindle speed: max. 10,000 rpm Tool positions: 24 MACHINE DETAILS Control system: Heidenhain TNC 426 EQUIPMENT 24-position tool changer