TSM Machines B.V.

Condition: used, Year of construction: 2018, turning diameter over cross slide: 525 mm, turning length: 1,255 mm, turning diameter: 520 mm, travel distance X-axis: 305 mm, travel distance Z-axis: 1,305 mm, rotational speed (max.): 2,500 rpm, overall weight: 8,600 kg, DL-35M motorized turret, FANUC Series Oi-TF control Workholding fixtures and tools not included Isdpfxoz Sqwto Ad Nsbc AVAILABLE: late January/early February 2027

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Ijdsz Rnrrepfx Ad Nobc Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: used, Year of construction: 2011, centre height 280 mm centre distance 1000 mm turning diameter over bed 570 mm turning diameter over slide rest 340 mm turning length 1000 mm spindle head A8 DIN55027 spindle diameter 1 mm spindle bore 83 mm torque 1600 Nm turning speed range 1-2500 (2 Stufen) U/min worktool system Multifix C face stroke 340 mm rapid power traverse in X-and Z direction 5 / 10 m/min Iodjz I T Raopfx Ad Nsbc feed Z / X m / U feeding dorce 10000 / 7000 N tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock quill taper ISO MK 5 total power requirement 15 kW Weight 3550 Kg dimensions of the machine ca. 3,85 x 2,30 x 1,80 m WEILER D3 Control Unit (SIN810D), Three-Jaw Chuck Multifix C Steel Holder, Chip Conveyor, Various Interchangeable Jaws MULTIFIX C Quick-Change Steel Holders

Condition: used, Year of construction: 2007, functionality: fully functional, • WEMAS TURN 400-52 • Year of manufacture: 2007 Ibedpez Ip Nfsfx Ad Nsc • Control system: FANUC 0i-TC • Programming system: Manual Guide • Max. turning diameter: Ø 484 mm • Max. turning length: 750 mm • Spindle bore: Ø 70 mm • Rapid traverse: 24 m/min • Tool turret: VDI 30 • Hydraulic chuck • Hydraulic quick-change turret Chip conveyor

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC turning machine TNA480, TX8D, year of manufacture 1990, serial number 607. Servo C-axis, reinforced rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, 3-jaw chuck KNCS315, ID090090. Main drive with 2 gear stages. A8 spindle with hollow clamping cylinder Röhm SZS 86/169, ID 416530. Additional accessories, tool holders, chucks available upon request. Includes ATC optics, spare parts catalog, wiring diagram, tool holder catalog. Very good condition, operational, can be inspected while running. Machine geometry has been checked and corrected/adjusted, and a test run has been performed. Scraper + belt + drive sprocket, belt checked and replaced, maintenance performed at 4000 hours. Technically very good condition, guideways, spindle bearings in very good condition. Ibodpfx Adjz Eqh Dj Njc Videos available upon request.

Condition: excellent (used), Year of construction: 2020, swing 700mm, maximum turning diameter 480mm, bar capacity 80mm, maximum turning length 1240mm, spindle speed 3,250 rpm, , 12 station turret, spindle power 25.5Kw, Ibodpfez Ebmwsx Ad Nec siemens 840D Slimline control, tool setter, coolant, Swarf Conveyor.

Condition: used, Year of construction: 1997, functionality: unexamined, machine/vehicle number: 322379, Cycle-controlled lathe Kern CD 480, year of manufacture 1997, control system Heidenhain MANUALplus. Machine no. 322379. Iodpfx Adsz A Ui Te Njbc Equipment: Protective enclosure with viewing windows, tailstock with rotating center, Multifix quick-change tool holder, coolant supply, coolant unit, handwheels for the cross slide and longitudinal slide. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: new, Year of construction: 2018, functionality: fully functional, turning length: 3,060 mm, turning diameter: 494 mm, spindle speed (max.): 2,000 rpm, overall weight: 17,500 kg, controller model: Fanuc 0i-TD, An unused CNC lathe is for sale! TECHNICAL DETAILS Maximum turning diameter: 800 mm Turning diameter: 494 mm Maximum turning length: 3,060 mm Spindle speed max.: 2,000 rpm Bar capacity: 115 mm X-axis travel: 300 + 20 mm Z-axis travel: 3,100 mm Chuck: 15″ Spindle nose: A2-11 Tool stations: 12 Boring bar diameter: 50 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Tailstock diameter: 110 mm Tailstock taper: MK 5 Incline: 45° MACHINE DETAILS Control model: FANUC 0i-T C-axis: Duplomatic VDI60 Spindle motor power: 30 kW Motor power X-axis: 4 kW Motor power Z-axis: 7 kW Electrical connection: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,120 x 2,310 mm Machine weight: approx. 17,500 kg EQUIPMENT Linear scale on the X-axis Hydraulic steady rest SMW SLUB-5 D50-D310 Tool presetter Renishaw HPMA Ibodpfx Adsz Ar Rko Nsc Warning light Chip conveyor High-pressure pump (10 bar)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, spindle speed (max.): 3,250 rpm, overall weight: 7,600 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Iedpfxez Apduj Ad Nsbc Spindle bore: 76 mm Torque at 40% duty cycle (ED) max.: 630 Nm Torque at 100% duty cycle (ED): 420 Nm Number of tool positions in tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg MACHINE DETAILS Control system manufacturer: Siemens Spindle power at 40% duty cycle (ED): 33 kW Spindle power at 100% duty cycle (ED): 22 kW Electrical connection: approx. 50 kVA Mains connection: 400 V Frequency: 50/60 Hz Dimensions & Weight Dimensions with chip conveyor: approx. 5,300 × 1,900–2,200 × 1,700–2,000 mm Machine weight: approx. 7,500 kg EQUIPMENT Chip conveyor

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 700 mm Distance between centers: 3,000 mm Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm MACHINE DETAILS Ibedpjz Apc Rjfx Ad Nsc Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, Used CNC turning machine Manufacturer: Böhringer Type: VDF 250 Cm Year of manufacture: 1997 Ijdpfxsz Anv No Ad Nsbc with accessories.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 12081614, type of input current: three-phase, overall weight: 3,300 kg, Title: 5-Axis CNC Machining Center ARIX V450, Year 2012, Functional/In Operation Condition: Functional, in operation Year of Manufacture: 2012 Location: West Saxony Price: Negotiable Technical Data: Manufacturer: ARIX CNC Machines Co., Ltd. (Taiwan) Type: V450 (Mini High Speed Machining Center) Serial Number: 12081614 Control: ARIX CNC (Fanuc-compatible) 5-Axis Version (4th/5th axis rotary table) Travel: X 450 mm / Y 350 mm / Z 400 mm Spindle Power: 7.5 kW Tool Magazine: 20 positions (cone magazine) Connection: 400 V, 3-phase, 6 kVA Weight: approx. 3,200 kg Operating Hours: Not documented Description: For sale is a compact 5-axis CNC machining center, ARIX V450, manufactured in 2012, with ARIX CNC control. The machine features a cone magazine with 20 tool positions and is designed for the precise complete machining of smaller to medium-sized workpieces in 5 axes. The machine is functional and currently in operation. Operating hours are not documented. Inspection and test run at the location in West Saxony are possible by arrangement. Ibedpfx Adezyktfj Nsc Price: Negotiable Other machines available from site liquidation. Site takeover negotiable. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2015, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle bore: 102 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, 2-axis CNC lathe Doosan Puma 2600LB Year of manufacture: 2015 Siemens 828D control system with Shop Turn interface Axis travel: X - 260 mm Z - 1350 mm Max. turning diameter: 481 mm Ibsdszxz I Ropfx Ad Nec Max. turning length: 1275 mm 12-inch (315 mm) chuck with a large spindle bore of 102 mm 12-tool turret Tailstock Very good machine condition Included with the machine: - Documentation - LNS chip conveyor

Year of construction: 1997, condition: used, Specification Data Manufacturer VDF Boehringer Model VDF 250 Cm Year 1997 Serial No. 1114.3705-24 Machine type CNC turning center / CNC lathe Control Siemens Sinumerik 840C Design Slant-bed Tailstock No Swing over bed 550 mm Swing over cross slide 480 mm Maximum turning length 1,000 mm X-axis travel 405 mm Z-axis travel 1,099 mm Spindle bore 103 mm Spindle nose Size 8, DIN 55026 Front spindle bearing Ø 150 mm Maximum chuck Ø 315 mm Spindle power 53 kW (50% duty) Maximum spindle torque 780 Nm Ibjdpfx Adszw D I Re Nec Spindle speed 30–3,000 rpm* Turret 12 positions Tool interface VDI 50, DIN 69880 Rapid traverse X/Z 10 m/min Maximum feed rate 10,000 mm/min Maximum feed force 15 kN Dimensions L × W × H approx. 5,400 × 3,200 × 2,400 mm Machine weight approx. 11,000 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 3,000 mm, turning diameter over bed slide: 480 mm, controller model: Siemens 840D, TECHNICAL DETAILS Swinging diameter over bed: 520 mm Swinging diameter over carriage: 480 mm Turning length: 3,000 mm C-axis: yes Ijdpfx Adezwmzto Nebc C-axis speed range: 0–20 rpm Number of tools: 12 Driven tools: 6 Spindle bore: 103 mm Main spindle head size: 8 MACHINE DETAILS Control system: Siemens 840D Main drive Main drive: 1-stage AC main drive Drive power: 53 kW Duty cycle: 50 % Speed range: 30–3,000 rpm EQUIPMENT Forkardt 3 NHF 315-82 A8 power chuck with centrifugal force compensation and hard, ground-in top jaws Outer diameter of power chuck: 315 mm Bore diameter of power chuck: 82 mm Maximum bar diameter: 63 mm Including draw tube and mounting for power chuck

Condition: good (used), Year of construction: 2009, control FANUC 18i-TB Control x-axis 0 mm z-axis 0 mm Ibsdpfx Adozvq Dpe Njc spindle taper 0 number of spindle speeds 0 engine output 0 kW weight of the machine ca. 8.200 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m DOOSAN PUMA TL 2500LM with IFS extraction system, multi-turret turning centres for shaft machining The PUMA TL series stands out thanks to its innovative design, featuring both upper and lower turrets. This advanced configuration makes it the ideal choice for the demanding machining of shafts, such as camshafts and crankshafts. Thanks to the capability for simultaneous 4-axis machining, complex machining processes can be carried out precisely, efficiently and in a single operation. --> Technical Specifications Mains connection: AC 200/220 V, 3-phase with earth, 50/60 Hz --> Rated power: 52.33 kVA --> Max. connected load: 22.0 kW --> Full-load current: 137.33 A --> Short-circuit current: 33.0 kA --> Max. turning diameter: 350 mm --> Max. turning length: 700 mm --> Spindle bore: 76 mm --> Main spindle: Integrated motorised spindle drive with oil cooling --> Tool holder: VDI 40 --> Number of turrets: 2 --> Tool stations: 20 (12 upper / 8 lower) --> Tailstock: Hydraulic --> Lubrication: Automatic centralised lubrication --> Coolant system: Separate coolant tank, 210 litres --> Machine bed: Meehanite cast iron bed with hardened box-type slideways --> Chuck: Hydraulic chuck Manufacturer: SCHUNK --> Type: ROTA NC 315-86 --> ID No. > Design: 3-jaw wedge-hook power chuck --> Chuck diameter: 315 mm --> Through-bore: 86 mm --> Piston stroke: 25 mm --> Stroke per jaw: 5.8 mm --> Max. clamping force: 155 kN --> Max. actuating force: 58 kN --> Max. speed: 3,500 min?¹ --> Jaw pitch: 1/16" × 90°

Condition: used, Technical details: turning diameter over bed: 230 mm turning diameter over support: 135 mm centre distance: 2000 mm spindle bore: 60 mm tailstock quill taper MT: MK 5 tailstock quill adjustment:: 300 mm total power requirement: 5,5 kW weight of the machine ca.: 2,5 t dimension machine approx.LxWxH: 3,7 x 1,20 x 1,30 m Ibodpfx Aezvnq Tjd Noc • 4 change gears installed • No taper turning attachment • 3-jaw chuck: Ø 350 mm • 4-jaw chuck: Ø 315 mm • Coolant system available *

Condition: used, Year of construction: 1997, turning diameter / mm turning length / mm control / Technical Data – MAZAK QTN-30 Manufacturer: MAZAK / Yamazaki Mazak Type: QTN-30 Year of manufacture: 1997 Machine type: Horizontal CNC turning center Control system: MAZATROL T PLUS Number of axes: 2 Max. swing diameter: approx. 510 mm Max. machining diameter: approx. 310–320 mm Max. machining length: approx. 1,000 mm X-axis travel: approx. 200–201 mm Z-axis travel: approx. 1,010 mm Spindle speed: approx. 33–3,300 rpm Spindle bore: approx. 80 mm Spindle nose: A2-8 Spindle motor: approx. 22 kW Chuck: Hydraulic, approx. 250–300 mm Isdpozu Dazofx Ad Nebc Turret: 8-station / 16 tool positions, depending on configuration Tool holder: approx. 25 × 25 mm Tailstock: Fully automatic, MT 5 Automatic tailstock: Included Chip conveyor: Included Coolant system: Included (depending on equipment) Machine weight: approx. 4,300–5,300 kg (depending on configuration) Dimensions: approx. 2,800 × 1,950 × 1,950 mm (depending on configuration) The specifications regarding the 1997 model year and the QTN-30—featuring MAZATROL T PLUS, Ø510 × 1,000 mm capacity, Ø80 mm spindle bore, 33–3,300 rpm speed range, and a 22 kW spindle motor—are confirmed by a specific QTN-30 offer from 1997. Subject to change and without guarantee – Technical data

Condition: repair required (used), Year of construction: 2006, functionality: not functional, turning diameter: 450 mm, travel distance X-axis: 303 mm, travel distance Z-axis: 1,160 mm, overall weight: 10,000 kg, swing diameter over bed slide: 700 mm, controller model: Siemens 810D ShopTurn, Note: The main drive motor is currently not functional; an inspection and/or repair is required. TECHNICAL DETAILS Maximum turning diameter: 450 mm Swinging diameter over bed: 700 mm Swinging diameter over cross slide: 500 mm Maximum workpiece length: 1,100 mm X-axis travel: 303 mm Z-axis travel: 1,160 mm C-axis resolution: 0.001° Spindle speed max.: 3,500 rpm Distance between centers: 1,230 mm Chuck diameter: 315 mm Bore in draw tube: 95 mm Iedpfxezt Sbkj Ad Njbc MACHINE DETAILS Control: Siemens 810D ShopTurn Total weight: approx. 10,000 kg EQUIPMENT C-axis Tailstock Steady rest Hollow chuck cylinder Chip conveyor Extraction system

Condition: ready for operation (used), Year of construction: 1993, turning length: 1,900 mm, turning diameter: 700 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 25 rpm, rotational speed (min.): 25 rpm, rotational speed (max.): 4,000 rpm, total height: 2,520 mm, total length: 9,000 mm, total width: 4,100 mm, overall weight: 21,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, -Turning length: 1900 mm -Maximum workpiece diameter over the bed: 700 mm -Spindle head A11 DIN 55026 -Tool system: 2 x 12 pieces -Tool holders according to DIN 69880, diameter 50 mm -Automatic door sliding mechanism Iodpjztr N Isfx Ad Nsbc -Tailstock prepared for diameters of 80 mm - 262 mm -Pressure booster pump

Condition: excellent (used), Year of construction: 1985, Control: Philips B2T Swinging diameter: 640 mm Machining diameter, longitudinal: 550 mm Machining diameter on the turret: 450 mm Turning length: 1000 mm Spindle speed: 2,240 rpm Spindle bore: 103 mm Ibjdpfx Adozpy Rrs Njc 12-position turret, VDI 60 Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 100 rpm, Microcut Challenger CNC Lathe Model: BNC-1840 Control: FAGOR 8055 FL Year: 2004 Swing over Bed: 475mm Distance between centres: 1000mm Spindle Speeds: 100 – 4500 RPM Ibsdpfezlhm Hex Ad Noc Spindle Bore: 65mm Machine with: Quick Change Toolpost Filtermist Unit 3-jaw chuck Dimensions: 3000 x 1850 x 2000mm high Weight: 3000 kgs

Condition: excellent (used), Year of construction: 2012, INDEX V300 CNC vertical turning center Ijdpfxozlalus Ad Nebc Power: 87 kW Year: 2012 1 tool turret with 10 positions CNC: SIEMENS SINUMERIK 840D sl with parts conveyor Approximately 19 tool holders, including powered tool holders, and tool displays for 10 tools Chip conveyor Tilting and fork-liftable chip bin, GOUBARD model.

Condition: excellent (used), Year of construction: 2012, INDEX V300 Vertical CNC Turning Center Power: 87 kW Ibedpfx Ajzlalned Nec Year: 2012 1 turret with 10 tool positions CNC: SIEMENS SINUMERIK 840D sl Part conveyor Approximately 8 tool holders, including powered tool holders Chip conveyor Tilting and forkliftable chip bin, GOUBARD 5-level shelving

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 402 mm, turning length: 758 mm, turning diameter: 450 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 582 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 450 mm Maximum turning length: 758 mm Diameter of rotation over the bed: 582 mm Diameter of rotation over the cross slide: 402 mm Spindle speed: 3,000 rpm Ibodpjzgt U Sjfx Ad Nec Maximum spindle torque: 351 Nm Distance between centers: 744 mm Bar diameter: 81 mm Chuck size: 260 mm (10") Maximum bar diameter: 40 mm Axes: X, Z Number of tool positions in the tool changer: 12 Tool shank size: 25 × 25 mm Travel in the X-axis: 250 mm Travel in the Z-axis: 790 mm Rapid traverse rate in the X/Z direction: 30 m/min MACHINE DETAILS Control model: Hurco WinMax Spindle power: 22 kW Power supply: 400 V / 50 Hz (market-dependent) Machine weight: approx. 5,000 kg