ARAG Bau AG

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss surfaces. It is currently still fully assembled and installed. This allows interested parties to inspect the existing system scope and installation situation before dismantling and document it for later reassembly. Technical data and equipment: • Large-area filtered supply air ceiling panel, approximately 8,100 × 4,500 mm • Filter ceiling divided into two sections across its width • Large-area floor extraction system, approximately 8,100 × 3,650 mm, with grating Blsdpfx Aaez Ikyrj Tsn • Supply air treatment, approximately 24,500 m³/h • Exhaust air treatment, approximately 24,000 m³/h • Supply and exhaust air fans / air treatment unit • Existing heating/hot water technology with pumps and fittings • Air ducts and existing piping • Electrical system control / switch cabinet • Cabin lighting • Sale includes the system as it currently exists on site Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. The previous use included high-quality surface finishing, including high-gloss coatings. An inspection of the still assembled system is highly recommended. Sales and dismantling conditions: Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer must organize the necessary skilled personnel and lifting, dismantling, and transport equipment. The complete dismantling and transport must be completed by July 31, 2027, at the latest. Price: EUR 31,500.00 excluding VAT. Note: Technical specifications have been compiled based on available documents, nameplates, and the current condition of the system. Information without guarantee. The condition and scope determined during inspection shall be the decisive factor.

Condition: used, BINDER Vacuum Drying Oven with Pump Module BINDER VD 56 + VD-M 53 Vacuum drying oven up to 220 °C with pump unit and BINDER VAP 1 vacuum pump. For sale is a used BINDER VD 56 vacuum drying oven from the year 2023, including a matching BINDER VD-M 53 pump module and BINDER VAP 1 vacuum pump. The system is suitable for the gentle drying of temperature-sensitive materials under vacuum conditions, as well as for applications in laboratories, research, development, quality control, and industrial process technology. Technical data: Manufacturer: BINDER GmbH Model: VD 56 Device type: Vacuum drying oven Year of manufacture: 2023 Article number: 9630-0002 Version: VD056-230V Made in Germany Temperature range: +9 °C above ambient temperature to +220 °C Internal volume: 55 liters Heating time to 100 °C: approx. 80 min Spatial temperature deviation at 100 °C: ± 1.2 K Temporal temperature deviation at 100 °C: ± 0.1 K Vacuum data VD 56: Leak rate: 0.01 bar/h Vacuum connection: small flange DN 16 Measuring port: small flange DN 16 Electrical data VD 56: Rated voltage: 200–230 V Mains frequency: 50 / 60 Hz Rated power: 1.4 kW Rated current according to nameplate: 6.1 A Phase: 1N~ Protection class: IP20 Dimensions VD 56 without attachments and connections: approx. 638 × 461 × 815 mm (W × D × H) Internal dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net device weight: approx. 96 kg Load capacity: Maximum load per insert: 20 kg Maximum total load: 60 kg Number of inserts standard / maximum: 1 / 5 Pump module: Manufacturer: BINDER GmbH Type: VD-M 53 Device type: Pump module for vacuum drying oven Article number: 8012-1943 Year of manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current consumption: 8.0 A Phase: 1N~ Protection class: IP20 Made in Germany Vacuum pump: Manufacturer: BINDER GmbH Type: VAP 1 Device type: Vacuum pump Article number: 5013-0217 Year of manufacture: 05/2023 Pumping speed: 2.0 / 2.2 m³/h Ultimate pressure: < 7 mbar Voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 1.6 / 1.5 A Protection class: IP40 Made in Germany Equipment: BINDER VD 56 vacuum drying oven BINDER VD-M 53 pump module / pump unit BINDER VAP 1 vacuum pump Digital controller with display of pressure and temperature Program-controlled drying monitoring Automatic ventilation at the end of the process Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measuring port DN 16 Safety glass pane with splinter protection Large viewing window Tray insert Bedpfxjz Ikx Uo Aa Teln Vacuum and connecting hoses Connection and mounting parts Connection cables Operating and assembly instructions according to the images Accessories according to the images Applications: Vacuum drying Gentle material drying Laboratory and experimental technology Research and development Quality control Material testing Industrial process technology Temperature and vacuum applications Scope of delivery: 1 × BINDER VD 56 vacuum drying oven 1 × BINDER VD-M 53 pump module / pump unit 1 × BINDER VAP 1 vacuum pump Vacuum and connecting hoses Connection and mounting parts Connection cables Operating and assembly instructions Accessories according to the images Scope of delivery as shown Overall dimensions including pump module: approx. 638 × 645 × 1,542 mm (W × D × H) Total weight including pump module and vacuum pump: approx. 130 kg Condition: Used Year of manufacture 2023 Optical condition according to the images Nameplates are present Scope of d

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, input voltage: 380 V, input frequency: 50 Hz, input current: 12 A, Industrial extraction fan / chip extraction fan – 11 kW – fully functional Selling price: EUR 2100.00, negotiable, excluding VAT Bledpfx Aaoz Ikxzo Tsn For sale is a robust industrial radial fan from a stationary extraction system of a wood processing production facility. The fan was in regular use until recently and is fully functional. Due to its heavy-duty industrial design, it is particularly suitable for extraction systems in carpentry shops, joineries, and other wood processing companies, as well as for comparable industrial applications. Technical data - Drive motor: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland - Type: KMER 160 M-4 - Motor power: 11.0 kW / 15 HP - Voltage: 380 / 660 V - Current: 23.0 / 13.0 A - Frequency: 50 Hz - Speed: 1,500 rpm - Protection class: IP44 - Insulation class: B - Motor number: 25787 - Design: stationary industrial radial fan - Condition: used, fully functional Volume flow and pressure: currently unknown, will be provided upon request. Condition The fan comes from an existing production facility and was in operation until recently. Visually, it shows signs of wear and tear due to age and use. According to the operator, it is technically fully functional. An on-site inspection is possible by arrangement and is highly recommended. Location and dismantling Location: 3608 Thun Switzerland The fan is currently still installed. Dismantling, removal, loading and transport are the complete responsibility of the buyer and will be carried out at their cost. Sale from the current location in its existing condition. Price: EUR 2100.00, negotiable, excluding VAT Various extraction pipes at the connection can be taken over.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, Concrete mixing plant, Sipe TTM 800 Year of manufacture: 2008 Mixer: 800 liters / approx. 14 cubic meters per hour Bljdpfxjz Ikxhe Aa Tjn Cement silo: 40 tons Scraper with chain for 2 types of gravel Control system: fully automatic with concrete control

Condition: good (used), Year of construction: 2015, functionality: fully functional, input voltage: 230 V, overall weight: 190 kg, For sale: a Robopac Compacta 4 horizontal wrapping machine from 2014/2015. This machine is suitable for horizontally wrapping long and bundled products with stretch film. Examples include wood, plastic profiles, aluminum profiles, tubes, moldings, and other long goods. The machine features a rotating wrapping ring and an automatic film clamping and cutting device. The wrapping speed is adjustable. The machine is operated using a foot pedal. Machine specifications: Brand: Robopac Type: Compacta 4 Year of manufacture: 2014/2015 Power supply: 230 V Frequency: 50/60 Hz Single-phase Power: 0.6 kW Current consumption: 5.4 A Compressed air: 6 bar Air consumption: approximately 1.8 Nl/min Weight according to nameplate: 190 kg Maximum ring speed: approximately 150 rpm Film width: up to approximately 125 mm The machine is mounted on a sturdy base and is equipped with a roller/conveyor system for easy product handling. The Robopac Compacta 4 is a compact and versatile machine for neatly and quickly wrapping long goods with stretch film. A video of the machine in operation can be sent upon request. Blodez Ikw Repfx Aa Ten Do you have any questions or would you like more information? Please feel free to contact us. The machine is located in Harfsen. It will be sold with an invoice. Keywords: Robopac, Compacta 4, wrapper, horizontal wrapper, horizontal wrapping, ring wrapper, film machine, stretch film, stretch wrapper, packaging machine, packaging machine for long goods, profile wrapper, Robopac Compacta.

Condition: good (used), Key technical specifications: • Working height: approximately 10.30 meters. • Maximum outreach: 3.30 meters. • Load capacity (platform): 200 kg to 250 kg depending on the configuration/year. • Total machine weight: approximately 3.28 tonnes (3,280 kg). • Dimensions (L x W x H): 2.81 m x 0.99 m x 1.99 m. • Power supply: 24V / 250 Ah electric traction battery. Bsdpfx Ajz Ikv Toa Tjln • Turret rotation: 350 degrees.

Condition: good (used), STANDARD SPECIFICATIONS MAIN SPECIFICATIONS Platform height 13.72 m Outreach 7.70 m Horizontal reach 7.24 m Platform capacity 230 kg MAIN FEATURES Maximize maneuverability by moving on uneven surfaces thanks to automatic traction control. Achieve optimal productivity through extended work cycles. Zero-emission product, 100% environmentally friendly. Improved access at height thanks to the articulated boom. Performance Working height 15.72 m Platform height 13.72 m Horizontal reach 7.24 m Working outreach 7.89 m Outreach 7.70 m Rotation (non-continuous) 360° Platform capacity (unrestricted) 230 kg Platform rotation (hydraulic) 180° Swing arm – Total length 1.24 m Swing arm – Articulation range 144° (+84°/ -60°) Machine weight * 6,670 kg Maximum ground pressure 5.3 kg/cm2 Bjdpfxez Ikv Hj Aa Teln Travel speed 5.2 km/h Gradeability 30% Turning radius – Inside 0.61 m Turning radius – Outside 3.15 m * Some options or national regulations may increase the weight and/or dimensions of the machine. With an outreach of 0.65 m beyond the platform. Power supply Electrical systems 48 V DC Batteries Drive motors Tires 8 x 6V 370 A/h AGM Dual AC traction

Condition: like new (used), Year of construction: 2026, functionality: fully functional, volume flow: 100 m³/h, power: 2.2 kW (2.99 HP), Becker U5.101 rotary vane vacuum pump, oil-lubricated Bjdpfx Aaoz Ikvtj Toln Manufacturer: Becker Type: U5.101 Suction capacity: 100 m³/h Motor power: 2.2 kW Ultimate pressure: 0.1 mbar (abs.) Includes: gas ballast, oil filter Upon request, the vacuum pump can also be delivered ready for operation, including oil filling, pre-filter (paper filter), motor protection, and phase converter.

Condition: used, Year of construction: 1996, gebraucht 1996 090232 ca. 2 Wochen ab Auftragse Türkei 1 3100 mm 6 mm 19 1/min Bjdpfsz Ikvmjx Aa Tsln 1.5 ° 14 1000 mm 15 kW 200 l 3700 mm 2250 mm 2700 mm 1830 mm 5600 kg Swing-beam cutting design Motorized backgauge (1000 mm) with digital display Footpedal Central manual blade gap adjustment Cutting line illumination Wide support table with transfer balls 1 side gauge with scale, T-slot, and flip-stop 2 sheet support arms with T-slots Oil fill Light curtains at the rear of the machine THE BLADES WERE GRINDED Operating manual in German with EC Declaration of Conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 1998, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Überholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware Antriebe,Motoren,Maßstäbe aus Originalmaschine. Werkstückspindelstock nur umlaufend mit 320Nm numerisch gesteuerte B-Achse Innnschleifeinrichtung Dia 120mm HF-Spindel Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 400mm Bljdpfx Aaez Ikvgo Ten Innenschleifeinrichtung für HF Spindeln Reitstock mit Mikroverstellung KEL SET Messsystem Aktiv-Längspositionierung Kel-Pos Anschnitt-Sensor Marposs

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 380 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 300 mm, cutting width (max.): 300 mm, total height: 1,750 mm, total length: 2,420 mm, total width: 2,200 mm, overall weight: 2,400 kg, table height: 750 mm, Equipment: CE marking, documentation/manual, For sale: MEBER SM300 automatic saw. Bodpfx Aasz Ikvaj Tjln Minimum cut length in semi-automatic mode: 20mm. Minimum cut length in automatic mode: 90mm. The machine comes with all original documentation (manuals, certificate of conformity, CE marking), as well as a sworn expert report drawn up by a court-appointed expert after the machine was collected from my premises. Collection and transport are the responsibility of the buyer, at my premises. I am willing to assist with loading.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 25010/5, Year of construction: 2016, operating hours: 14,257 h, load capacity: 4,000 kg, lifting height: 6,350 mm, load center: 500 mm, fuel type: gas, mast type: triplex, motor manufacturer: VW, gearing type: hydrostat, front tire type: cushion tires (non-marking), rear tire type: cushion tires (non-marking), empty load weight: 6,440 kg, Equipment: 3rd hydraulic function, 4th hydraulic function, UVV, air conditioning, cabin, lighting, seat heater, sideshift, Equipment: Bsdsz Ikuvopfx Aa Tsln Triplex mast with full free lift, overall height: 2950 mm, lifting height: 6350 mm, fork positioner with side shift, opening min: 260 mm, max: 1570 mm, fork length: 2300 mm, road lighting according to STVZO (German Road Traffic Licensing Regulations), LED work lights front and rear, fully enclosed cabin with heating, air conditioning, 6-cylinder VW gas engine, manual transmission with single pedal operation, 4x SE non-marking tires, operating manual included. Technical condition at the time of sale: Forklift is technically refurbished! Major service recently performed! UVV inspection passed without any defects! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Available at any time during opening hours by prior appointment: Monday to Friday. From 8:00 a.m. to 6:00 p.m. Saturday from 8:00 a.m. to 1:00 p.m. TRANSPORT: Low-bed or covered truck available at a reasonable price.

Condition: excellent (used), 589 USED Doughnut fryer. EXTERNAL DIMENSIONS (in cm): - W: 140 (245 with table) - L: 85 - H: 115 (150 when open) EQUIPMENT: - doughnut fryer - 2 trolleys with tipping frying units - proofing cabinet - drip tray - exhaust hood The price is a net price. Bljdpfxsz Ikucj Aa Tsn Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2021, 580 USED Slicer for hamburger buns, hot dog buns, and bread rolls. EQUIPMENT: - table - cart TECHNICAL DATA: - year of manufacture: 2021 - power supply: 230V 50Hz - power: 0.3 kW Bljdpfjz Ikt Eex Aa Ton The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2009, 579 USED ARTEZEN SV 3 – Mondial Forni bread divider, supplied with a belt rounder. The units are offered as a complete set. DIVIDER EXTERNAL DIMENSIONS (in cm): - W: 55 (82 with hopper) - L: 223 - H: 177 - belt W: 29 ROUNDER EXTERNAL DIMENSIONS (in cm): - W: 70 - L: 185 - H: 145 TECHNICAL DATA: - year of manufacture: 2009 - power supply: 3+N+PE 400V 50Hz - weight range: 80–1780 g - 1- and 2-piston operation The price is the net price per set. Bodpsz Iktxofx Aa Tsln Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 2026, condition: new, The software for the steel trade optimizes cutting processes for all sawing jobs. Bedpsz Iktljfx Aa Tjln

Condition: used, mileage: 557,000 km, first registration: 12/2021, fuel type: diesel, fuel: diesel, Year of construction: 2019, DAF XF 106 480 XT SSC SuperSpaceCab 4X2 STANDARD configuration, stationary air conditioning, intarder, sliding floor hydraulic system. • Long-haul driver's cab, Super Space Cab • Emission standard: EURO 6D • Power: 355 kW / 483 hp • Displacement: 12,902 cm³ • Automatic transmission • Retarder/Intarder • ABS / EBS / ESP • 2-circuit tipping/sliding floor hydraulic system • Adaptive cruise control • Emergency braking assist • Lane keeping assist • Differential lock • TC / switchable • Hill start assist • Electric mirrors • Electric windows • Multifunction steering wheel • Airbag • Central locking • Refrigerator • Navigation system • Radio / CD • Telephone / CB radio • 2 bunks / beds • Cab spoiler • Sun visor • Fog lights • Automatic climate control / Bledoz Ikrzspfx Aa Ten • Stationary / roof-mounted air conditioning • Auxiliary heater • Disc brakes • Suspension: leaf spring/air suspension • 1 aluminum fuel tank: 820 liters • GVWR: 18,000 kg (20,500 kg technically possible) • Unladen weight • Wheelbase: 3,800 mm • Tire size front/rear: 385/65 R22.5 / 315/70 R22.5 • Tire tread depth: 12 / 12 10/11/11/11 mm - MOT/emission test valid until: 12/2026 - German vehicle! - 1st owner Errors and prior sale excepted!

Condition: as good as new (ex-display), functionality: fully functional, Hydraulic plate shear / WEIKA Model 3200x10mm / NEW - Unused -CE marking -Control display -Cutting length 3200mm -Max. cutting thickness / STEEL 10mm -Max. cutting thickness / STAINLESS STEEL 8mm -Max. cutting thickness / ALUMINUM 12mm -Digital back gauge -Manual shear gap adjustment -Foot switch -Rear light barrier / Left - Right -Front support with ball rollers -Drive power 11KW Dimensions: L x W x H 4 x 2 x 1.9 meters / Weight 8000KG Errors and omissions excepted. Bodsz Ikrnspfx Aa Tjln

Condition: excellent (used), functionality: fully functional, mileage: 10,100 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 4,035 mm, overall weight: 3,500 kg, empty load weight: 2,285 kg, maximum load weight: 1,215 kg, first registration: 11/2025, next inspection (TÜV): 12/2026, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, fuel tank capacity: 90 l, emission class: euro6e, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2025, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, hill-start assist, immobilizer system, lane keeping assist, navigation system, onboard computer, parking sensors, power assisted steering, rear view camera, second-hand vehicle warranty, sliding door, soot filter, start-stop system, traction control, truck registration, From first owner Cruise control Automatic climate control Rearview camera Navigation system Park Distance Control (PDC) Start & Stop system (S&S) Permissible total weight: 3,500 kg, payload: 1,215 kg Cargo area: L: 4070 mm, W: 1870 mm, H: 1932 mm Cargo area with wooden floor + wooden side panels Rear wing doors with 270° opening angle 3-seater with headrests and center armrest Blodpfx Ajz Ikrbea Ten Multifunction steering wheel Hands-free system Voice control Onboard computer Electric windows Electric exterior mirrors Electric immobilizer Radio + Bluetooth Apple CarPlay / Android Auto USB port Media display touchscreen 6-speed manual transmission Airbag for driver + passenger Anti-lock braking system (ABS) Anti-slip regulation (ASR) Driving assistance system: Distance warning Driving assistance system: Hill start assist Driving assistance system: Brake assist Driving assistance system: Emergency brake assist Driving assistance system: Lane keeping assist Driving assistance system: Driver fatigue detection Driving assistance system: Traffic sign recognition Daytime running lights Central locking with remote control Power steering Traction control Lumbar support Heat-reflecting glazing Height-adjustable steering wheel Height-adjustable driver's seat Document holder Cup holder Third brake light Sliding door, right side Fuel tank: 90 liters Euro 6e / particulate matter badge (green) Engine displacement: 2184ccm, 103 kW / 140 hp

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, Overview Property Specification Value Bledpsz Ikq Rsfx Aa Ton Capacity 700 Liters (24.7 cu. ft.) Storage Capacity Up to 528 standard 2-inch cryoboxes Temperature Range −86 °C to −50 °C Internal Dimensions (W×D×H) 890 × 605 × 1300 mm External/Housing Dimensions (W×D×H) 1110 × 938 × 1966 mm (approx. 44 × 37 × 77 inches) Weight 288 kg (approx. 700 lbs) Electrical Supply 230 V, 50 Hz (EU configuration) Noise Level 47 dB(A) Key Technical Features • Thermal Insulation: High-efficiency VIP (Vacuum Insulation Panels) combined with polyurethane foam. • Green Refrigerants: Environmentally friendly R-290 and R-170 natural cooling agents. • Power Outage Security: Long warm-up time; samples remain completely frozen for >30 hours during a system failure or power loss. • Warm-up Profile: Takes 360 minutes to rise from −86 °C to −50 °C without load. • Chamber Configuration: Includes 3 adjustable stainless steel shelves, creating 4 separate inner compartments with insulated inner doors. • Access Control: Ergonomic outer handle integrated with a secure key lock. • Data Connectivity: Built-in USB and Ethernet interfaces to facilitate seamless sample tracking data transfer. • Compliance & Certifications: ENERGY STAR® certified, ISO 14001, UL, cUL, and UKCA marked. Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Bljdpfxsz Ikq Dj Aa Tsn Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2013, KAESER EB421C blower unit no. 1148, with frequency converter Year: 2013 Capacity: 32.20 m3/min Pressure: 1.67 bar Power: 55 kW Bledpfxjz Ikqwo Aa Ten KAESER OMEGA53 blower, no. 1186, year 2017. Siemens motor, model 1lg62532aa903, 55 kW.

Condition: ready for operation (used), functionality: fully functional, L&Z Lathe WEILER MATADOR -Center height 140mm -Distance between centers 500mm -Speed range (continuously variable speed adjustment 25-3000 rpm) -Automatic longitudinal / facing feeds -Spindle bore approx. 36mm -Threading / Metric / Inch etc. -Chuck guard -3-jaw chuck -Multifix base with insert -Drill chuck & live center -Documentation Bjdpfx Asz Ikqksa Tsln Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg Errors and omissions excepted.

Condition: excellent (used), mileage: 31,203 km, power: 184 kW (250.17 HP), first registration: 07/2008, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,850 mm, fuel: diesel, fuel tank capacity: 200 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 8, emission class: euro5, total length: 8,950 mm, total width: 2,450 mm, permissible axle load (axle 1): 4,800 kg, permissible axle load (axle 2): 8,500 kg, Year of construction: 2008, Equipment: ABS, EBS, USB port, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, full service history, onboard computer, power assisted steering, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Rear work lights - Front work lights - Armrest - AUX input - Outside temperature display - Cup holder Blodpfez Ikp Tsx Aa Tjn - Heated mirrors - Power brake booster - Sunroof/hatch - Differential lock - Differential lock - Tachometer - Electrically adjustable, heated mirrors - Driver’s seat height adjustment - Remote central locking - High beam - Windscreen - Enclosed cab - Tinted glass - Hydraulic system - Height-adjustable steering wheel - Front seat height adjustment - Cab - Foldable exterior mirrors - Air conditioning - Load protection grille - LED lighting - Air-suspended seats - Air horns - Air suspension - Centre armrest - Particulate filter - PTO - Radio/CD player - Spare wheel - Reversing camera - Disc brakes - Headlight height adjustment - Sleeper cab - Sun visor - Immobiliser - Tachograph - Partition wall - Pre-heater - Winch = Additional Information = Technical information No. of cylinders: 6 Engine displacement: 5,880 cc Front axle: Max. axle load: 4,800 kg; Steered Rear axle: Twin tyres; Differential lock; Max. axle load: 8,500 kg Weights Unladen weight: 7,190 kg Payload: 4,800 kg Gross vehicle weight: 11,990 kg Condition Technical condition: very good Visual condition: very good Damages: none = Company Information = Nidro Cars Holland is located in the centre of the country and is the right address for purchasing your car, van, or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: SEE OUR ENTIRE STOCK AT All types of trade are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from their content.)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 9,097 h, load capacity: 1,800 kg, fuel type: gas, mast type: duplex, motor manufacturer: VW, gearing type: automatic, fork length: 1,200 mm, color: red, Equipment: 3rd hydraulic function, lighting, seat heater, sideshift, Hello, I am selling a forklift: - Linde H18-T - Year 2011 - Lifting capacity: 1800 kg - Lifting height: 3860 mm Bodpsz Ikptjfx Aa Teln - Mast height: 2440 mm - Fork length: 1200 mm - Fork carriage - Lighting - Heated seat - Everything is in working order - Oil and filter change: August 2026, at 9097 hours - The forklift is fully functional - Price: 4900 EUR (net)