KAMA GmbH

Condition: used, functionality: fully functional, machine/vehicle number: 6359, Heidelberg Cylinder S 54×72 for die cutting only Machine data serial number: 6359 Was in daily use. Defects: missing right side dimension, cylinder is damaged on the upper edge, the deepest point of the damage is 45mm. The machine error does not affect the operation of the machine!! Lrsdpfxsyw Nwgj Ab Eji

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter Lrjdpfoywdt Asx Ab Esi A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: good (used), Original Heidelberg GT 34×46 Automatic Die Cutter This machine can cut, creas, perforate, and even print (optional). Excellent condition, recently serviced. 100% original, no modifications. Machine format: 34x46cm Pressure: 60t Weight: 600gsm Working speed: 4000 sheets/h Weight: 2300kg Lodpfjywdr Sox Ab Eeri Fully complete, includes frame and spare parts, but no print rollers. A very rare machine on the market.

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter Lrodpfx Aeywdr Eeb Eoi The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Year of construction: 1979, condition: used, functionality: fully functional, Type: Die Cutter (Currently in production) Manufacturer: TMZ, Spain Model: D-4500 Lredpfxeyvgc As Ab Eoi Year: 1979 Max sheet format 1300 x 900 mm Cardboard from 150 to 1500 gr. Corrugated cardboard max thickness 7 mm Length 4500 x width 2500 x height 2500 mm Weight 16000 kg

Year of construction: 2005, condition: used, Kama TS 105 diecutting and embossing machine Year: 2005 Equipped with: Mabeg feeder Sheet alignment Ledpfsyu S Nfsx Ab Ejri Diecutting section Kama HFS hotfoil unit Delivery Siemens Simatic OP7 digital control panel Mechanical speed max: 4.500 cycles/h Cutting force max: 1.9 MN Max sheet size: 740 x 1.050 mm Min sheet size: 330 x 480 mm Carton thickness: 130 - 1.500 g/m² micro-corrugated cardboard thickness: 1.8 mm Gripper edge min.: 10 mm Stack height (feeder): 1.150 mm Stack height (delivery): 880 mm Only 6,3 million lifting strokes

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Lsdpeyur Diefx Ab Ejri Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: good (used), Automatic die-cutter Bobst SPO 1575 EEG ref 2925 Year – 1966, machine modernized in 2008 Max sheet format – 1055 x 1575 mm Ledpfeytuxgjx Ab Esri Min sheet format – 400 x 600 mm Max mechanical output – 4500 sheets/h Max pressure – 350 t Vacuum feeder Stripping section Waste removal by bar Batch delivery Attractive price for quick sale

Year of construction: 1991, condition: good (used), Bobst 102E ref. 2957 Ledjyturyspfx Ab Eeri year: 1991 max sheet size – 720 x 1020 mm min sheet size – 350 x 420 mm max pressure – 250 tons stripping section material – board up to 2000 gsm corrugated board – E flute machine raised – 300 mm

Year of construction: 1987, condition: good (used), 1 used die-cutting and embossing platen with additional automatic feeder Rabolini Imperia Gold, year of manufacture 1987 Lrodpjyttuaefx Ab Eoi

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: 18033, We offer this used Bobst M5 430 8K machine, year of construction 2018. Manufacturing year: 2018 Machine type: M5 430 8K Serial number: 18033 Print width: 430 mm 8 colors GEW UV Chilled drums Automatic register control (digital cameras) Automatic pressure control Combo configuration Lrsdpfoytc Ipox Ab Eji Delamination / Relamination Corona treatment Turnbar Both-sided material cleaner Combo (cold foil, peel-off labels) Video inspection 3 x die-cut stations (also semi-rotary option included) 2 x DigiGap Fully servo-driven SMARTSCAN (E+L system) 200% inspection of the web, web monitoring, label counter, defect signal output If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 1956, condition: used, Format 540×720 mm (21×28″) Lrsdpfx Aeyr H Htjb Eji Punching cylinder Available at short notice

Year of construction: 2005, condition: like new (used), functionality: fully functional, machine/vehicle number: 053801204, Machine is meticulously maintained Has been operating in a greeting cards factory Comes with centre line system 2 x die cut chases Lrodpfx Abjyrnhxs Eoi 1 x embossing honeycomb if required Can be demonstrated on location, London Area, UK Available immediately

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine Ljdpoymxkgofx Ab Ejri This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm Lredoymxkaopfx Ab Eji The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter Lrjdpoymxipjfx Ab Eji The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. Lrodpfx Aeymxiiob Esi The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake Lrjdpjyl Ry Defx Ab Esi - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Compact footprint Unwind Web guide Web width 330 In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Lrsdpfx Ajylpvdob Eoi Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Lateral/ Cross movement possible Waste rewinder Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg

Condition: used, Year of manufacture: N/A Condition: excellent Technical specifications: - maximum format -1500 × 1050 mm - maximum speed 14 cycles/min - electromagnetic clutch - self-centering frame for quick clamping of the die - automatic centralized lubrication Device description: ML 1500 is a robust punching and notch press with working area 1500 × 1050 mm, intended for precise punching and creasing operations. The machine construction ensures high stability, long service life and reliable operation even in demanding production environments. Key features: - Standard operating speed of approximately 14 cycles per minute - Powerful motor in the range of 5.5 – 11 kW (depending on configuration) - High machine weight and rigid frame for accurate cutting results - Suitable for continuous industrial operation - Lredsyk Eg Ajpfx Ab Eoi Typical applications: The machine is primarily intended for the printing, packaging, and converting industries, including: - Production of cardboard boxes and packaging, - Die cutting of paper, carton, and similar materials, - Creasing and preparation of folding lines, - Both short-run and high-volume production.

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. Lredpjyi Dbpefx Ab Eji This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg Ledpfx Aboyi Da Sj Ejri 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: good (used), Busch Model B Label Puncher Professional machine made in Germany. Busch is a leader in the production of pallet turners and pushers. Lrsdsyi Daxopfx Ab Eoi Very good condition, ready for production. The machine is equipped with a quick-action hydraulic unit. Safety guards, die-cutting clamps with micro-adjustment in every plane, and additional rotational adjustment. Quick and convenient die-cutting leveling. Adjustable feed table in every plane. Long delivery tail. Maximum format 230x230mm Weight 850kg 400V power supply The machine can be used to produce labels, calendars, sample cards, etc.

Year of construction: 2006, condition: ready for operation (used), Specification Detail Die cutting and stripping unit Max. Sheet Size 1050 x 750 mm Min. Sheet Size 450 x 370 mm Max. Die Cutting Area 1040 x 730 mm Lrjdpfx Aoyha N Hjb Eei Max. Speed 7,500 sheets per hour Max. Pressure 250 tons Stock Range 100 gsm paper to 2000 gsm cardboard; up to 3 mm corrugated board Min. Gripper Margin 4 mm Machine Weight 18,000 kg

Condition: used, Year of construction: 2004, functionality: fully functional, Bograma BSM 750/220/15 Servo punching line, year of manufacture 2004 Bograma BSM 750/220/15 Servo, year of manufacture 2004 Bograma sheet feeder TA 15, year of manufacture 2004 Bograma shingled delivery SAB 750, year of manufacture 2004 Ledpfeygr I Sox Ab Eeri